This patch performs additional checks in at91_udc, just in case of
some spurious interrupts or device enumeration.
Signed-off-by: NWojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch zeroes some variables when usb_gadget_register_driver()
fails. gadgetfs does a dummy registration to get the name of the USB
driver and then waits for user-land driver. If someone plugs the cable
in the meantime, bad things happen, because at91_udc has been left in
inconsistent state.
Signed-off-by: NWojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch allows gadget drivers that support high speed (e.g. gadgetfs)
to work properly with at91_udc.

Fix suggested by Milan Svoboda in
http://marc.theaimsgroup.com/?l=linux-usb-devel&m=115822184711817Signed-off-by: NWojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ELAN's U132 is a USB to CardBus OHCI controller adapter,
    designed specifically for CardBus 3G data cards to
    function in machines without a CardBus slot.
The "ftdi-elan" module is a USB client driver, that detects
    a supported CardBus OHCI controller plugged into the
    U132 adapter and thereafter provides the conduit for
    for access by the "u132-hcd" module.
The "u132-hcd" module is a (cut-down OHCI) host controller
    that supports a single OHCI function of the CardBus 
    card inserted into the U132 adapter.

The problem with the initial implementation is that when
the CardBus card inserted into the U132 adapter has multiple
functions (and a CardBus card can support up to 4 functions),
it was the first function that was arbitrarily choosen.

The first batch of 3G cards tested, like the Merlin Qualcomm
V620, have two functions each supporting a seperate USB OHCI
host controller, of which it was that first function that is
wired up to the 3G modem.

Then along comes the Vodafone Mobile Connect 3G/GPRS data card,
aka "Option GT 3G Quad" as printed on it's rear or "Option N.V.
GlobeTrotter Fusion Quad Lite" as read with "lspci -v". And it
has the meaningful functionality in the second CardBus function.

That presents a problem because it was the "ftdi-elan" module
alone that knows how to communicate to the embedded CardBus slot
and the "u132-hcd" module alone that knows how to access the
pcmcia configuration and CardBus accessible memory space. And
of course, the information about attached (internally hardwired)
devices is contained within USB configuration embedded somewhere
within the CardBus card.

If only the "u132-hcd" module probe() interface could return a
result code that propagated back to the instigating function
platform_device_register() then the "ftdi-elan" module could
try an alternative CardBus function.     However in spite of
the recent changes to the drivers/base/ routines that moved 
device_attach() from bus_add_device() to bus_attach_device()
both of those routines lose the "failed to attach" 0 result
code and thus the calling routine, namely device_add() is
incapable of propaging the "failed to attach" condition back
to platform_device_add() and consequently back to the caller
of platform_device_register()

Experiments show that patching bus_attach_device() to return
ENODEV fails with the kernel locking up very early during
boot. But, however, if the patch is restricted to calls from
platform_device_add() then it does seem to work.

Unfortunately, until the kernel's drivers/base is properly
modified to propagate -ENODEV back to the caller of
platform_device_register(), it is necessary to "fix" the
"ftdi-elan" module by importing knowledge from the 
"u132-hcd" module. This is the reason for the duplicated
functionality introduced in this patch.
Signed-off-by: NTony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is an update to the AT91 USB Device (Gadget) driver.

Adds support for the Atmel AT91SAM9260 and AT91SAM9261 processors.  The
only difference is how they handle the pullup pin.
[Patch from Patrice Vilchez]

Need to clear any pending USB Device interrupts before registering the
interrupt handler.  The bootloader might have been using the USB Device
port.   [Patch from Peer Georgi]

VBUS detection is handled by a GPIO interrupt which only triggers on a
change. Is is therefore necessary to read the current VBUS state
explicitly at startup.  [Patch from Peer Georgi]
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is an update to the AT91 USB Device (Gadget) driver.

The base I/O address provided in the platform_device resources is now
ioremap()'ed instead of using a statically mapped memory area.  This
helps portability to the newer AT91sam926x processors.

The major change is that we now have to pass a 'struct at91_udc'
parameter to at91_udp_read() and at91_udp_write().
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550.
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I have found a problem where the root_port_reset() goes into an infinite
loop and stalls the kernel.

This happens when a hardware fault inside the machine occurs during a small
timing window.  In case of USB device connection, if a USB device responds to
hcd_submit_urb(), and later the controller fails before root_port_reset(),
root_port_reset() will loop infinitely because ohci_readl() will always
return "-1".  Such a failure can include ejecting a CardBus OHCI controller.

The probability of this problem is low, but it will increase if PnP type
usage is frequent.  The attached patch can solve this problem and I believe
that it is better to fix this problem.
Signed-off-by: NTakamasa Ohtake <ohtake-txa@necst.nec.co.jp>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove a warning about an unused variable in the OHCI bus glue for at91.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace
(space before tab, at end of line) as well as the obsolete inline changelog.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update maintainer records for two USB host controller drivers.  I'm the
main point of contact for both EHCI and OHCI, although I don't have much
time for them any more.  Roman hasn't submitted OHCI patches for years.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Allow gadget drivers to omit the unbind() method.  When they're
statically linked, that's an appropriate memory saving tweak.

Similarly, provide consistent/simpler handling for a should-not-happen
error case:  removing a peripheral controller driver when a gadget
driver is still loaded.  Such code dates back to early versions of the
first implementation of the gadget API, and has never been triggered.

Includes relevant section annotation fixs for gmidi.c, file_storage.c,
and serial.c; we don't yet have an "init or exit" annotation.  Also
some whitespace fixes in gmidi.c (space at EOL, before tabs, etc).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Certain boards seem to like to issue false overcurrent notifications,
for example on ports that don't have anything connected to them.  This
looks like a hardware error, at the level of noise to those ports'
overcurrent input signals (or non-debounced VBUS comparators).  This
surfaces to users as truly massive amounts of syslog spam from khubd
(which is appropriate for real hardware problems, except for the
volume from multiple ports).

Using this new "ignore_oc" flag helps such systems work more sanely,
by preventing such indications from getting to khubd (and spamming
syslog).  The downside is of course that true overcurrent errors will
be masked; they'll appear as spontaneous disconnects, without the
diagnostics that will let users troubleshoot issues like
short-circuited cables.  In addition, controllers with no devices
attached will be forced to poll for new devices rather than relying on
interrupts, since each overcurrent event would generate a new
interrupt.

This patch (as826) is essentially a copy of David Brownell's ignore_oc
patch for ehci-hcd, ported to uhci-hcd.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7508

When the Nokia E70 Phone is plugged in to the USB port, I get:

end_request: I/O error, dev sda, sector 1824527
sd 0:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1824535
sd 0:0:0:0: SCSI error: return code = 0x10070000

The fix is to add these lines to drivers/usb/storage/unusual_devs.h:

Cc: <honkkis@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes Intuos3 4x6 bugs
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added VendorId and ProductId for Huawei E220 USB Modem
Signed-off-by: NJohann Wilhelm <johann.wilhelm@student.tugraz.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This prevents the kernel from detecting the virtual cd-drive with the
Windows drivers.
Signed-off-by: NJohann Wilhelm <johann.wilhelm@student.tugraz.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This one adds another vendor ID to rtl8150 driver.  Please apply.
Signed-off-by: NPetko Manolov <petkan@nucleusys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When u132-hcd is built, it includes local header ohci.h, which appears
to have been intended only for use by ohci-hcd.

This throws warnings about functions which are defined and not used.
The warnings thrown are because three small functions are implemented in
the header, but not declared 'inline', a rather strange affair.

Since these functions are small, let's go ahead and define them as
'inline', just like the inline functions surrounding them.  This makes
things more consistent, and kills the warnings.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added a device specific ioctl function to prevent the disabling of canonical
mode.  EINVAL is returned for any TCSETSF ioctl that doesn't have ICANON set.
This patch is for 2.6.17 or later kernels.

When "hwinfo --modem" is executed it opens the funsoft USB serial device and
disables canonical mode.  The device is kept this way until hwininfo has
finished probing any modems on a system.  The funsoft device expects to be
running in canonical mode.  Switching the device to raw mode can cause
incomplete data packets and device timeouts.
Signed-off-by: NDavid Clare <david@funsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch adds the Baltech Reader ID to the list of USB IDs in the
CP2101 driver.

From: Johannes Hoelzl <johannes.hoelzl@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch:
- converts usblp fully to mutex
- makes sleeping interruptible where EINTR can be returned anyway
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Several drivers have bogus ioctl code that tries unneccessarily to
override the standard processing. In the three cases here the actual code
is not only wrong but also not required as they implement the proper
set_termios method as well.

Remove the junk.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

as David has objected to the patch against the gl620a driver,
here's a patch implementing David' suggestion of removing the incomplete
ifdefed code from the gl620a driver.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>

below is a patch for the ftdi_sio driver to include a new device ID for
CCS MachX PIC programmer.


From: Jan Capek <jan@ccsinfo.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added the device id (0x413c, 0x8115) for the Dell wireless HSDPA 5500,
which is a rebranded Novatel EU730.
Signed-off-by: NEagle Jones <eagle@newdream.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

in disconnect you set the interface's private data to NULL. In your IO
methods you unconditionally follow the pointer into never never land.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The PhidgetServo causes an Oops when any of its sysfs attributes are read
or written too, making the driver useless.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  [PATCH] Generic HID layer - update MAINTAINERS
  input/hid: Supporting more keys from the HUT Consumer Page
  [PATCH] Generic HID layer - build: USB_HID should select HID

Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the redirect packet of the router if the jiffies wraparound.
Signed-off-by: NLi Yewang <lyw@nanjing-fnst.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The message logged in tcp_v4_inbound_md5_hash when the hash was expected
but not found was reversed.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

md5sig_info.alloced4 must be set to zero when freeing keys4, otherwise
it will not be alloc'd again when another key is added to the same
socket by tcp_v4_md5_do_add.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Linus has changed work queue structure and has not tested it with
connector compiled in, his changes break the build.

Attached patch fixes compilation error.

Patch is against commit 99f5e971.

Thanks to Toralf Förster for pointing this out.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update version to 3.71.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 5906 PHY requires a special register bit to power down and up the
PHY.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hot-plug scripts can call tg3_open() as soon as register_netdev() is
called in tg3_init_one().  We need to call pci_set_drvdata() before
register_netdev(), and netif_carrier_off() needs to be moved to
tg3_open() to avoid race conditions.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tp->link_config.orig_* values must be assigned during
tg3_set_settings() because these values will be used to setup the
link speed during tg3_open().  Without these assignments, the link
speed settings will be all messed by if tg3_set_settings() is called
when the device is down.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although the menu dependencies in net/ipv6/netfilter/Kconfig
guard the entries in that file from the Kconfig GUI, this does
not prevent them from being selected still via "make oldconfig"
when IPV6 etc. is disabled.

So add explicit dependencies.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>