This patch is to add GFX10 based Yellow Carp KFD support.
We will bypass IOMMU v2.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable ip blocks for yellow carp.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds the sdma v5.2 support for yellow carp.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add yellow carp checks to gfx10 code.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch sets fw load type as direct with fw_load_type=0 for yellow carp.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add gfx memory controller support for yellow carp.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds the support for yellow carp ih block.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds common ip support for yellow carp.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds yellow_carp_reg_base_init function to init the register
base for yellow carp.

v2: squash in updates (Alex)
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds yellow carp support for gpu_info firmware and ip
block setting.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds yellow carp to amd_asic_type enum and amdgpu_asic_name[].
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is to add yellow carp asic header files.

v2: squash in updates (Alex)
v3: squash in DCN updates (Alex)
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.

As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.

BTW, amdgpu has already done it in:
commit ba0b2275 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.
Signed-off-by: NChen Li <chenli@uniontech.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also fix some coding issues reported from sparse.
Signed-off-by: NChen Li <chenli@uniontech.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1726:2-3: Unneeded semicolon
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In SRIOV environment, KMD should access GC registers
with RLCG if GC indirect access flag enabled.

Using _SOC15 read/write macros ensures that they go
through RLC when flag is enabled.
Signed-off-by: NRohit Khaire <rohit.khaire@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable this only for Sienna Cichild
since only Navi12 and Sienna Cichlid support SRIOV
Signed-off-by: NRohit Khaire <rohit.khaire@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RLC_CP_SCHEDULERS and RLC_SPARE_INT0 have different
offsets for Sienna Cichlid
Signed-off-by: NRohit Khaire <rohit.khaire@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Integrate two generic functions to determine if HDP
flush is needed for all Asics.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove ASIC specific functions for BACO support check. Use generic smu11
function instead.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For smuv11, check for VF also during BACO check.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Avoid reading BIF STRAP each time for BACO capability. Read the STRAP
value while checking BACO capability in PPTable.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

BACO/MACO is not applicable for aldebaran. Remove the redundant check.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Testing on AMD Carizzo with DCE-11.0 display engine showed that
it doesn't like a 36 bpp linebuffer very much. The display just
showed a solid green.

Testing on RavenRidge DCN-1.0, Polaris11 with DCE-11.2 and Kabini
with DCE-8.3 did not expose any problems, so for now only revert
to 30 bpp linebuffer depth on asics with DCE-11.0 display engine.

Fixes: a316db72 ("drm/amd/display: Increase linebuffer pixel depth to 36bpp.")
Reported-by: NTom StDenis <Tom.StDenis@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The variable active_disp is being initialized with a value that
is never read, it is being re-assigned immediately afterwards.
Clean up the code by removing the need for variable active_disp.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The variable k is being assigned a value that is never read, the
assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is to optimize memory mapping latency, and also aviod
a page fault in a corner case of changing valid PDE into
PTE.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is to pass the flag to KFD, and optimize table_freed in
amdgpu_vm_bo_update_mapping.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is a part of memory mapping optimization.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is to provide more tlb flush types option for different
case scenario.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm_err meant broken user space could spam dmesg.

Fixes: f258907f "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It will cause error when alloc memory larger than 128KB in
amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc.

Call Trace:
   alloc_pages_current+0x6a/0xe0
   kmalloc_order+0x32/0xb0
   kmalloc_order_trace+0x1e/0x80
   __kmalloc+0x249/0x2d0
   amdgpu_bo_create+0x102/0x500 [amdgpu]
   ? xas_create+0x264/0x3e0
   amdgpu_bo_create_vm+0x32/0x60 [amdgpu]
   amdgpu_vm_pt_create+0xf5/0x260 [amdgpu]
   amdgpu_vm_init+0x1fd/0x4d0 [amdgpu]
Signed-off-by: NChangfeng <Changfeng.Zhu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On SRIOV, driver should only access register through RLC in runtime
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nshaoyunl <shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add sysfs attr to read/write smartshift bias level.
document smartshift_bias sysfs attr.

V2: add attr to amdgpu_device_attrs and use attr_update (Lijo)
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add sysfs attrs to read smartshift APU and DGPU power share.
document the sysfs device attributes.

V2: change variable/macro name for stapm power limit (Lijo)
V3: files to be exposed as sysfs device attributes (Alex)
V4: check ret value of sysfs create and remove only if created.
V5: add ss attrs in amdgpu_device_attrs and use attr_update (Lijo)
V6: all checks for ss support to be in if else if statements. (Lijo)
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add back.

Fixes: 0cadcf7c ("drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK}")
Signed-off-by: NLeslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take the situation with gfxoff, the optimization may cause
corrupt CE ram contents. In addition emit_cntxcntl callback
has similar optimization which firmware can handle properly
even for power feature.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add AMDGPU_INFO_VBIOS_INFO subquery id for detailed vbios info.

Provides a way for the user application to get the VBIOS
information without having to parse the binary.
It is useful for the user to be able to display in a simple way the VBIOS
version in their system if they happen to encounter an issue.

V2:
Use numeric serial.
Parse and expose vbios version string.

V3:
Remove redundant data in drm_amdgpu_info_vbios struct.

V4:
64 bit alignment in drm_amdgpu_info_vbios.

v5: squash together all the reverts, etc. (Alex)
Signed-off-by: NJiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For 16bpc display support.
Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>