The driver's VDD on/off logic assumes that whenever the VDD is on we
also hold an AUX power domain reference. Since BIOS can leave the VDD on
during booting and resuming and on DDI platforms we won't take a
corresponding power reference, the above assumption won't hold on those
platforms and an eventual delayed VDD off work will do an extraneous AUX
power domain put resulting in a refcount underflow. Fix this the same
way we did this for non-DDI DP encoders:

commit 6d93c0c4 ("drm/i915: fix VDD state tracking after system
resume")

At the same time call the DP encoder suspend handler the same way as the
non-DDI DP encoders do to flush any pending VDD off work. Leaving the
work running may cause a HW access where we don't expect this (at a point
where power domains are suspended already).

While at it remove an unnecessary function call indirection.

This fixed for me AUX refcount underflow problems on BXT during
suspend/resume.

CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460963062-13211-4-git-send-email-imre.deak@intel.com

Compute the DSI PLL parameters during .compute_config() rather than
.pre_pll_enable() so that we can fail gracefully if we can't find
suitable parameters.

In order to do that we need to store the DSI PLL parameters in
pipe_config.

v2: Handle BXT too
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460488478-18311-3-git-send-email-ville.syrjala@linux.intel.comTested-by: NJani Nikula <jani.nikula@intel.com>

I caught a few errors in our current PHY/CDCLK programming by sanity
checking the actual programmed state, so I thought it would be also
useful for the future. In addition to verifying the state after
programming it also verify it after exiting DC5, to make sure DMC
restored/kept intact everything related.

v2:
- Inlining __phy_reg_verify_state() doesn't make sense and also
  incorrect, so don't do it (PW/CI gcc)
v3:
- Rebase on latest -nightly
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459780030-15781-1-git-send-email-imre.deak@intel.com

Power well 1 is managed by the DMC firmware so don't toggle it on-demand
from the driver. This means we need to follow the BSpec display
initialization sequence during driver loading and resuming (both system
and runtime) and enable power well 1 only once there. Afterwards DMC
will toggle power well 1 whenever entering/exiting DC5.

For this to work we also need to do away getting the PLL power domain,
since that just kept runtime PM disabled for good.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-12-git-send-email-imre.deak@intel.com

For internal APIs passing dev_priv is preferred to reduce indirections,
so convert over a few DDI PHY, CDCLK helpers.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-10-git-send-email-imre.deak@intel.com

On Broxton we need to enable/disable power well 1 during the init/unit
display sequence similarly to Skylake/Kabylake. The code for this will
be added in a follow-up patch, but to prepare for that unexport
skl_pw1_misc_io_init(). It's a simple function called only from a single
place and having it inlined in the Skylake display core init/unit
functions will make it easier to compare it with its Broxton
counterpart.

This also flips the order of Misc IO and power well 1 disabling which
matches the enabling order. The specification doesn't prescribe the
disabling order, so this should be fine.

v2:
- Fix incorrect enable vs. disable power well call in
  skl_display_core_uninit() (Patrik)
- Add commit comment about chaning the order of PW1 and Misc IO power
  well disabling (Patrik)

CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPatrik Jakobsson <patrik.jakobsson@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459773777-10701-1-git-send-email-imre.deak@intel.com

Extract the GPLL reference frequency from CCK and use it in the
GPU freq<->opcode conversions on VLV/CHV. This eliminates all the
assumptions we have about which divider is used for which czclk
frequency.

Note that unlike most clocks from CCK, the GPLL ref clock is a divided
down version of the CZ clock rather than the HPLL clock. CZ clock itself
is a divided down version of the HPLL clock though, so in effect it just
gets divided down twice.

While at it, throw in a few comments explaining the remaining constants
for anyone who later wants to compare this to the spreadsheets.

v2: Add slow/fast notes for CHV clocks (Imre)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457120584-26080-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com> (v1)

Sink count can change between short pulse hpd hence this patch
adds a member variable to intel_dp so we can track any changes
between short pulse interrupts.

This patch reads sink_count dpcd always and removes its
read operation based on values in downstream port dpcd.

SINK_COUNT dpcd is not dependent on DOWNSTREAM_PORT_PRESENT dpcd.
SINK_COUNT denotes if a display is attached, while
DOWNSTREAM_PORT_PRESET indicates how many ports are available
in the dongle where display can be attached. so it is possible
for sink count to change irrespective of value in downstream
port dpcd.

Here is a table of possible values and scenarios

sink_count      downstream_port
                present
0               0               no display is attached
0               1               dongle is connected without display
1               0               display connected directly
1               1               display connected through dongle

v2: Storing value of intel_dp->sink_count that is ready
    for consumption. (Ander)
    Squashing two commits into one. (Ander)

v3: Added comment to explain the need of early return when
    sink count is 0. (Ander)
Tested-by: NNathan D Ciobanu <nathan.d.ciobanu@intel.com>
Signed-off-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NShubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459341326-13142-4-git-send-email-shubhangi.shrivastava@intel.com

Current DP detection has DPCD operations split across
intel_dp_hpd_pulse and intel_dp_detect which contains
duplicates as well. Also intel_dp_detect is called
during modes enumeration as well which will result
in multiple dpcd operations. So this patch tries
to solve both these by bringing all DPCD operations
in one single function and make intel_dp_detect
use existing values instead of repeating same steps.

v2: Pulled in a hunk from last patch of the series to
    this patch. (Ander)

v3: Added MST hotplug handling. (Ander)

v4: Added a flag to check if detect is performed to
    prevent multiple detects on hotplug. (Ander)
Tested-by: NNathan D Ciobanu <nathan.d.ciobanu@intel.com>
Signed-off-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NShubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
[anderco: fix parenthesis aligment]
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459341326-13142-2-git-send-email-shubhangi.shrivastava@intel.com

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459350996-4957-2-git-send-email-maarten.lankhorst@linux.intel.com

Patch based on a previous series by Shashank Sharma.

v2: Do not read GAMMA_MODE register to figure what mode we're in

v3: Program PREC_PAL_GC_MAX to clamp pixel values > 1.0

    Add documentation on how the Broadcast RGB property is affected by CTM

v4: Update contributors

v5: Refactor degamma/gamma LUTs load into a single function

v6: Fix missing intel_crtc variable (bisect issue)

v7: Fix & simplify limited range matrix multiplication (Matt Roper's
    comment)
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NKumar, Kiran S <kiran.s.kumar@intel.com>
Signed-off-by: NKausal Malladi <kausalmalladi@gmail.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Acknowledged-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125837-2576-4-git-send-email-lionel.g.landwerlin@intel.com

Implement Daniel Stone's recommendation to not read registers to infer
the hardware's state.

v2: Read GAMMA_MODE register value at init (Matt Roper's comment)

v3: Read GAMMA_MODE register in intel_modeset_readout_hw_state along
    with other registers (Matt Roper's comment).

v4: Mask GAMMA_MODE register with interesting bits when reading
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458125837-2576-3-git-send-email-lionel.g.landwerlin@intel.com

The moves a couple of functions programming the gamma LUT and CSC
units into their own file.

On generations prior to Haswell there is only a gamma LUT. From
haswell on there is also a new enhanced color correction unit that
isn't used yet. This is why we need to set the GAMMA_MODE register,
either we're using the legacy 8bits LUT or enhanced LUTs (of 10 or
12bits).

The CSC unit is only available from Haswell on.

We also need to make a special case for CherryView which is recognized
as a gen 8 but doesn't have the same enhanced color correction unit
from Haswell on.

v2: Fix access to GAMMA_MODE register on older generations than
    Haswell (from Matt Roper's comments)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1458125837-2576-2-git-send-email-lionel.g.landwerlin@intel.com

The BXT display connections have DSI transcoders A and C that can be
muxed to any pipe, not unlike the eDP transcoder. Add the notion of DSI
transcoders.

The "normal" transcoders A, B and C are not used with BXT DSI, so care
must be taken to avoid accessing those registers with DSI transcoders in
the hardware state readout, modeset, and generally everywhere.

v2: addressing comments by Ville:
 - rename the dsi get config function to hsw_get_dsi_transcoder_state
 - rebase onto the higher level split of pipe/transcoder functions
 - use more has_dsi_encoder as we can now because of the above,
   with no need to look at the transcoder so much
 - rename IS_DSI_TRANSCODER to transcoder_is_dsi
 - use the above a bit more instead of comparing to < TRANSCODER_EDP
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/299740536b7941e31b2744f3ce34f7afe936a771.1458313400.git.jani.nikula@intel.com

Split out the part initing the clock gating hooks and move it earlier.
Add a new NOP hook for platforms without the need to apply clockgating
or workaround settings, so that the hook can be called unconditionally.
Also add a WARN for future platforms that forget to add a hook.

The rest of the hooks in intel_init_pm() should be inited in the same
way, but atm some of the hooks are set only conditionally, so before
doing this we need to make the setup unconditional and use instead some
flags.

v2:
- add a NOP hook and WARN if no hook is set for the platform (Chris)
- use the term hook instead of callback for these functions (Jani)
v3:
- remove the GEN4() check it's already covered by earlier platform
  checks (Chris)

CC: Jani Nikula <jani.nikula@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-6-git-send-email-imre.deak@intel.com

All of this is SW only initialization so we can move them earlier. Move
the mutex init where the rest of the locks are inited. While at it also
convert dev to dev_priv.

v2:
- use the term hook instead of callback for these functions (Jani)

CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-5-git-send-email-imre.deak@intel.com

Whenever there's an update to the primary plane,
fbc_pre_update and fbc_post_update are called. Kill off
intel_crtc->atomic.update_fbc and now that intel_crtc->atomic
is empty, kill it off too.

Changes since v1:
- Add a intel_fbc_supports_rotation helper.
Changes since v2:
- Remove intel_fbc_supports_rotation_helper.
- Remove unrelated changes.
Changes since v3:
- Rebase
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>

fb_bits is useful to have in the crtc_state for cs flips when
the code is updated to use intel_frontbuffer_flip_prepare/complete.
So calculate it in advance and move it to crtc_state. The other stuff
can be calculated in post_plane_update, and aren't useful elsewhere.

Changes since v1:
- Changing wording, remove comment about loop.
Changes since v2:
- Rebase.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-1-git-send-email-maarten.lankhorst@linux.intel.com

commit 92826fcd ("drm/i915: Calculate watermark related members in the crtc_state, v4.")
broke thigns by removing the pre vs. post wm update distinction. We also
lost the pre plane wm update entirely for VLV/CHV from the crtc enable
path.

This caused underruns on modeset and plane enable/disable on CHV,
and often those can lead to a dead pipe.

So let's bring back the pre vs. post thing, and let's toss in an
explicit wm update to valleyview_crtc_enable() to avoid having to
put it into the common code.

This is more or less a partial revert of the offending commit.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 92826fcd ("drm/i915: Calculate watermark related members in the crtc_state, v4.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Manage the LCPLLs used with DisplayPort, so that all the HSW/BDW DPLLs
are managed by the shared dpll code.

v2: Introduce INTEL_DPLL_ALWAYS_ON flag to please state checker. (Ander)

v3: Initialize pll->flags in intel_shared_dpll_init(). (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-13-git-send-email-ander.conselvan.de.oliveira@intel.com

Move shared dpll function prototype together with other shared dpll
definitions.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-7-git-send-email-ander.conselvan.de.oliveira@intel.com

Change the type of intel_crtc_state->shared_dpll to be a pointer to a
shared dpll. With this there is no need to first convert the id stored
in the crtc state to a pointer in order to use it. It does introduce a
bit of hassle on doing the opposite.

The long term objective is to hide details about dpll ids behind the
shared dpll interface.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-5-git-send-email-ander.conselvan.de.oliveira@intel.com

No functional changes.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-3-git-send-email-ander.conselvan.de.oliveira@intel.com

Create the new file intel_dpll_mgr.c and move the shared dpll code to
it. Follow up patches that reorganize pll handling will move more code
there and tweak the interface.

No functional changes.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-2-git-send-email-ander.conselvan.de.oliveira@intel.com

The raw watermark values are needed when planes are not part of the state,
but this introduced a regression and possibly an overflow when merging
the watermarks because invalid values may end up used. Solve this by calculating
raw watermarks for all levels, and only setting non-zero values when the level
is valid.

Fixes the SNB warning:
   WARNING: CPU: 1 PID: 25405 at drivers/gpu/drm/i915/intel_pm.c:2580 ilk_program_watermarks+0x7b2/0x9d0 [i915]()
   WARN_ON(wm_lp != 1)
   Modules linked in: i915 drm_kms_helper drm bluetooth fuse iTCO_wdt iTCO_vendor_support syscopyarea sysfillrect sysimgblt fb_sys_fops tpm_tis mei_me e1000e snd_hda_codec_hdmi pcspkr tpm mei i2c_i801 lpc_ich snd_hda_codec snd_hda_core
   CPU: 1 PID: 25405 Comm: kms_universal_p Tainted: G     U  W       4.5.0-rc6apollolake+ #462
   Hardware name:                  /DH67GD, BIOS BLH6710H.86A.0160.2012.1204.1156 12/04/2012
    0000000000000000 ffff88009d42b918 ffffffff8143cfab ffff88009d42b960
    ffffffffa0363580 ffff88009d42b950 ffffffff81082746 ffff8800b9a24928
    ffff88009d42ba00 ffff88009d4a0000 0000000000000000 ffff88009d42ba6c
   Call Trace:
    [<ffffffff8143cfab>] dump_stack+0x4d/0x72
    [<ffffffff81082746>] warn_slowpath_common+0x86/0xc0
    [<ffffffff810827cc>] warn_slowpath_fmt+0x4c/0x50
    [<ffffffffa0292862>] ilk_program_watermarks+0x7b2/0x9d0 [i915]
    [<ffffffffa0292cb7>] ilk_initial_watermarks+0x107/0x120 [i915]
    [<ffffffffa02feffa>] intel_pre_plane_update+0x12a/0x190 [i915]
    [<ffffffffa02ffb36>] intel_atomic_commit+0x546/0xd50 [i915]
    [<ffffffffa012c9e7>] drm_atomic_commit+0x37/0x60 [drm]
    [<ffffffffa0217361>] drm_atomic_helper_disable_plane+0xb1/0xf0 [drm_kms_helper]
    [<ffffffffa011cdb4>] __setplane_internal+0x184/0x280 [drm]
    [<ffffffffa012b57a>] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm]
    [<ffffffffa012010f>] drm_mode_setplane+0x13f/0x1c0 [drm]
    [<ffffffffa0111b52>] drm_ioctl+0x142/0x590 [drm]
    [<ffffffffa011ffd0>] ? drm_plane_check_pixel_format+0x50/0x50 [drm]
    [<ffffffff811f2744>] ? mntput+0x24/0x40
    [<ffffffff811d28d4>] ? __fput+0x194/0x200
    [<ffffffffa012dec3>] drm_compat_ioctl+0x33/0x40 [drm]
    [<ffffffffa029e1c2>] i915_compat_ioctl+0x32/0x40 [i915]
    [<ffffffff81228d72>] compat_SyS_ioctl+0xc2/0x330
    [<ffffffff810021d5>] ? exit_to_usermode_loop+0x95/0xb0
    [<ffffffff81002d2e>] do_fast_syscall_32+0x9e/0x210
    [<ffffffff8197faf2>] entry_SYSENTER_compat+0x52/0x70

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Testcase: kms_universal_plane
Fixes: d81f04c5 ("drm/i915: Allow preservation of watermarks, v2.")
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56DEA1FC.8080703@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

In commit 1e657ad7 we moved the last step of firmware initialization to
skl_display_core_init(), where it will be run only during system resume,
but not during driver loading. Since this init step needs to be done
whenever we program the firmware fix this by moving the initialization
to the end of intel_csr_load_program().

While at it simplify a bit csr_load_work_fn().

This issue prevented DC5/6 transitions, this change will re-enable those.

v2:
- remove debugging left-over and redundant comment in csr_load_work_fn()

Fixes: 1e657ad7 ("drm/i915/gen9: Write dc state debugmask bits only once")
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457121461-16729-1-git-send-email-imre.deak@intel.com

Generalize rawclk handling by storing it in dev_priv.

Presumably our hrawclk readout works at least for CTG and ELK
since we've been using it for DP AUX on those platforms. There
are no real docs anymore after configdb vanished, so the only
reference is the public CTG GMCH spec. What bits are listed in
that doc match our code. The ELK GMCH spec have no relevant
details unfortunately.

The PNV situation is less clear. Starting from
commit aa17cdb4 ("drm/i915: initialize backlight max from VBT")
we assume that the CTG/ELK hrawclk readout works for PNV as well.
At least the results *seem* reasonable for one PNV machine (Lenovo
Ideapad S10-3t). Sadly the PNV GMCH spec doesn't have the goods on
the relevant register either.

So let's keep assuming it works for PNV,ELK,CTG and read it out on
those platforms. G33 also has hrawclk according to some notes
in BSpec, but we don't actually need it for anything, so let's not
even try to read it out there.

v2: Rebase due to IS_VALLYVIEW vs. IS_CHERRYVIEW split
    Use KHz() all over, and kill off a few useless temp variables
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Currently the wait_for_atomic_us only allows for a jiffie
timeout granularity which is not nice towards callers
requesting small micro-second timeouts.

Re-implement it so micro-second timeout granularity is really
supported and not just in the name of the macro.

This has another beneficial side effect that it improves
"gem_latency -n 100" results by approximately 2.5% (throughput
and latencies) and 3% (CPU usage). (Note this improvement is
relative to not yet merged execlist lock uncontention patch
which moves the CSB MMIO outside this lock.)

It also shrinks some hot functions like fw_domains_get by a
tiny 3%.

v2:
  * Warn when used from non-atomic context (if possible).
  * Warn on too long atomic waits.

v3:
  * Added comment explaining CONFIG_PREEMPT_COUNT.
  * Fixed pre-processor indentation.
  (Chris Wilson)

v4:
 * Commit msg update (gem_latency) and rebase.

v5:
 * Commit message re-wording.
 * Added comment about no need for double cond check. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

This is for callers who want micro-second precision but are not
waiting from the atomic context.

v2:
  * Fix atomic waits. (Dave Gordon)
  * Use USEC_PER_SEC and USEC_PER_MSEC. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Only planes that are part of the state should be used for recalculating
watermarks. For planes not part of the state the previous patch allows
us to re-use the old values since they're calculated even for levels
that are not actively used.

Changes since v1:
- Remove big if from intel_crtc_atomic_check.
- Remove extra newline.
- Remove memset in ilk_compute_pipe_wm.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456826842-32553-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>

Rather than assume the VGA dotclock is really the FDI based thing,
let's read out the real thing via iclkip, and after readout it'll
get to compare it with the FDI based number to make sure they're
in sync.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Currently we check if the encoder's idea of dotclock agrees with what
we calculated based on the FDI parameters. We do this in the encoder
.get_config() hooks, which isn't so nice in case the BIOS (or some other
outside party) made a mess of the state and we're just trying to take
over.

So as a prep step to being able sanitize such a bogus state, move the
the sanity check to just after we've read out the entire state. If
we then need to sanitize a bad state, it should be easier to move the
sanity check to occur after sanitation instead of before it.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Instead of repopulatin the rotation_info struct for the fb every time
we try to use the fb, we can just populate it once when creating the fb,
and later we can just copy the pre-populate struct into the gtt_view.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-10-git-send-email-ville.syrjala@linux.intel.com

Throw out a bunch of unnecessary stuff from struct intel_rotation_info,
and pull most of the remaining stuff to live under an array of
per-color plane sub-structures.

What still remains outside the sub-structure will be reorgranized later
as well, but that requires more work elsewhere so leave it be for now.

v2: Split the vma size == luma+chroma size fix to prep patch (Daniel)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-8-git-send-email-ville.syrjala@linux.intel.com

intel_compute_page_offsets() gets passed a bunch of the framebuffer
metadate sepearately. Just pass the framebuffer itself to make life
simpler for the caller, and make it less likely they would make a
mistake in the order of the arguments (as most as just unsigned ints and
such).

We still pass the pitch explicitly since for 90/270 degree rotation
the caller has to pass in the right thing.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-7-git-send-email-ville.syrjala@linux.intel.com

intel_pin_and_fence_fb_obj() only needs the framebuffer, and the desird
rotation (to find the right GTT view for it), so no need to pass all
kinds of plane stuff.

The main motivation is to get rid of the uggy NULL plane_state handling
due to fbdev.

v2: Add a note why I really want this
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Grumpily-Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-6-git-send-email-ville.syrjala@linux.intel.com

The page aligned surface address calculation needs to know which way
things are rotated. The contract now says that the caller must pass the
rotate x/y coordinates, as well as the tile_height aligned stride in
the tile_height direction. This will make it fairly simple to deal with
90/270 degree rotation on SKL+ where we have to deal with the rotated
view into the GTT.

v2: Pass rotation instead of bool even thoughwe only care about 0/180 vs. 90/270
v3: Introduce intel_tile_dims(), and don't mix up different units so much
v4: Unconfuse bytes vs. pixels even more
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In addition to calculating final watermarks, let's also pre-calculate a
set of intermediate watermark values at atomic check time.  These
intermediate watermarks are a combination of the watermarks for the old
state and the new state; they should satisfy the requirements of both
states which means they can be programmed immediately when we commit the
atomic state (without waiting for a vblank).  Once the vblank does
happen, we can then re-program watermarks to the more optimal final
value.

v2: Significant rebasing/rewriting.

v3:
 - Move 'need_postvbl_update' flag to CRTC state (Daniel)
 - Don't forget to check intermediate watermark values for validity
   (Maarten)
 - Don't due async watermark optimization; just do it at the end of the
   atomic transaction, after waiting for vblanks.  We do want it to be
   async eventually, but adding that now will cause more trouble for
   Maarten's in-progress work.  (Maarten)
 - Don't allocate space in crtc_state for intermediate watermarks on
   platforms that don't need it (gen9+).
 - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit
   now that ilk_update_wm is gone.

v4:
 - Add a wm_mutex to cover updates to intel_crtc->active and the
   need_postvbl_update flag.  Since we don't have async yet it isn't
   terribly important yet, but might as well add it now.
 - Change interface to program watermarks.  Platforms will now expose
   .initial_watermarks() and .optimize_watermarks() functions to do
   watermark programming.  These should lock wm_mutex, copy the
   appropriate state values into intel_crtc->active, and then call
   the internal program watermarks function.

v5:
 - Skip intermediate watermark calculation/check during initial hardware
   readout since we don't trust the existing HW values (and don't have
   valid values of our own yet).
 - Don't try to call .optimize_watermarks() on platforms that don't have
   atomic watermarks yet.  (Maarten)

v6:
 - Rebase

v7:
 - Further rebase

v8:
 - A few minor indentation and line length fixes

v9:
 - Yet another rebase since Maarten's patches reworked a bunch of the
   code (wm_pre, wm_post, etc.) that this was previously based on.

v10:
 - Move wm_mutex to dev_priv to protect against racing commits against
   disjoint CRTC sets. (Maarten)
 - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten)

v11:
 - Now that we've moved to atomic watermark updates, make sure we call
   the proper function to program watermarks in
   {ironlake,haswell}_crtc_enable(); the failure to do so on the
   previous patch iteration led to us not actually programming the
   watermarks before turning on the CRTC, which was the cause of the
   underruns that the CI system was seeing.
 - Fix inverted logic for determining when to optimize watermarks.  We
   were needlessly optimizing when the intermediate/optimal values were
   the same (harmless), but not actually optimizing when they differed
   (also harmless, but wasteful from a power/bandwidth perspective).

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com

Commit 791a32be ("drm/i915: Drop intel_update_sprite_watermarks")
removes the use of this variable, but forgot to remove it.
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455108583-29227-5-git-send-email-maarten.lankhorst@linux.intel.com

Currently we perform our own wait in post_plane_update,
but the atomic core performs another one in wait_for_vblanks.
This means that 2 vblanks are done when a fb is changed,
which is a bit overkill.

Merge them by creating a helper function that takes a crtc mask
for the planes to wait on.

The broadwell vblank workaround may look gone entirely but this is
not the case. pipe_config->wm_changed is set to true
when any plane is turned on, which forces a vblank wait.

Changes since v1:
- Removing the double vblank wait on broadwell moved to its own commit.
Changes since v2:
- Move out POWER_DOMAIN_MODESET handling to its own commit.
Changes since v3:
- Do not wait for vblank on legacy cursor updates. (Ville)
- Move broadwell vblank workaround comment to page_flip_finished. (Ville)
Changes since v4:
- Compile fix, legacy_cursor_flip -> *_update.
Changes since v5:
- Kill brackets.
- Add WARN_ON when wait_for_vblanks fails.
- Remove extra newlines.
- Split the checks whether vblank is needed to a separate function,
  with comments why a vblank is needed.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56CD84DA.5030507@linux.intel.comReviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>