Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.

Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.
Signed-off-by: NDon Mullis <dwm@meer.net>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When CONFIG_PROC_FS=n and CONFIG_PROC_SYSCTL=n but CONFIG_SYSVIPC=y, we get
this build error:

kernel/built-in.o:(.data+0xc38): undefined reference to `proc_ipc_doulongvec_minmax'
kernel/built-in.o:(.data+0xc88): undefined reference to `proc_ipc_doulongvec_minmax'
kernel/built-in.o:(.data+0xcd8): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xd28): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xd78): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xdc8): undefined reference to `proc_ipc_dointvec'
kernel/built-in.o:(.data+0xe18): undefined reference to `proc_ipc_dointvec'
make: *** [vmlinux] Error 1
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This driver is an AC97 codec according to its help text.  However, if SOUND is
disabled, the "select SND_AC97_BUS" still inserts that into the .config file:

#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_SND_AC97_BUS=m

Even if the config software followed dependency chains on selects, we should
try to limit usage of "select" to library-type code that is needed (e.g., CRC
functions) instead of bus-type support.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix ieee80211-softmac compile problem where it's using schedule_work() on a
delayed_work struct.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS
  [PATCH] i386: Fix io_apic.c warning
  [PATCH] i386: export smp_num_siblings for oprofile
  [PATCH] x86: Work around gcc 4.2 over aggressive optimizer
  [PATCH] x86: Fix boot hang due to nmi watchdog init code
  [PATCH] x86: Fix verify_quirk_intel_irqbalance()
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

Since Voyager and Visual WS already define ARCH_SETUP,
it looks like PARAVIRT shouldn't be offered for them.

In file included from arch/i386/kernel/setup.c:63:
include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin=
ed
In file included from include/asm/msr.h:5,
                 from include/asm/processor.h:17,
                 from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/capability.h:45,
                 from include/linux/sched.h:46,
                 from arch/i386/kernel/setup.c:26:
include/asm/paravirt.h:163:1: warning: this is the location of the previous=
 definition
In file included from arch/i386/kernel/setup.c:63:
include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin=
ed
In file included from include/asm/msr.h:5,
                 from include/asm/processor.h:17,
                 from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/capability.h:45,
                 from include/linux/sched.h:46,
                 from arch/i386/kernel/setup.c:26:
include/asm/paravirt.h:163:1: warning: this is the location of the previous=
 definition
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>

gcc 4.2 warns

linux/arch/i386/kernel/io_apic.c: In function ‘create_irq’:
linux/arch/i386/kernel/io_apic.c:2488: warning: ‘vector’ may be used uninitialized in this function

The warning is false, but somewhat legitimate so work around it.
Signed-off-by: NAndi Kleen <ak@suse.de>

oprofile uses smp_num_siblings without testing for CONFIG_X86_HT.
I looked at modifying oprofile, but this way is cleaner & simpler
and I didn't see a good reason not to just export it when CONFIG_SMP.

WARNING: "smp_num_siblings" [arch/i386/oprofile/oprofile.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The new PDA code uses a dummy _proxy_pda variable to describe
memory references to the PDA. It is never referenced
in inline assembly, but exists as input/output arguments.
gcc 4.2 in some cases can CSE references to this which causes
unresolved symbols.  Define it to zero to avoid this.
Signed-off-by: NAndi Kleen <ak@suse.de>

2.6.19  stopped booting (or booted based on build/config) on our x86_64
systems due to a bug introduced in 2.6.19.  check_nmi_watchdog schedules an
IPI on all cpus to  busy wait on a flag, but fails to set the busywait
flag if NMI functionality is disabled.  This causes the secondary cpus
to spin in an endless loop, causing the kernel bootup to hang.
Depending upon the build, the  busywait flag got overwritten (stack variable)
and caused  the kernel to bootup on certain builds.  Following patch fixes
the bug by setting the busywait flag before returning from check_nmi_watchdog.
I guess using a stack variable is not good here as the calling function could
potentially return while the busy wait loop is still spinning on the flag.

AK: I redid the patch significantly to be cleaner
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Fix verify_quirk_intel_irqbalance(). genapic checks should really
happen only on affected versions of the E7520/E7320/E7525 based platforms.

AK: This should akpm's Coyote SDV
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
  Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606
  drm: add flag for mapping PCI DMA buffers read-only.
  drm: fix up irqflags in drm_lock.c
  drm: i915 updates
  drm: i915: fix up irqflags arg
  drm: i915: Only return EBUSY after we've established we need to schedule a new swap.
  drm: i915: Fix 'sequence has passed' condition in i915_vblank_swap().
  drm: i915: Add SAREA fileds for determining which pipe to sync window buffer swaps to.
  drm: Make handling of dev_priv->vblank_pipe more robust.
  drm: DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead
  drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks.
  drm: Core vsync: Don't clobber target sequence number when scheduling signal.
  drm: Core vsync: Add flag DRM_VBLANK_NEXTONMISS.
  drm: Make locked tasklet handling more robust.
  drm: drm_rmdraw: Declare id and idx as signed so testing for < 0 works as intended.
  drm: Change first valid DRM drawable ID to be 1 instead of 0.
  drm: drawable locking + memory management fixes + copyright
  drm: Add support for interrupt triggered driver callback with lock held to DRM core.
  drm: Add support for tracking drawable information to core
  drm: add support for secondary vertical blank interrupt to i915
  ...

Use direct assignment rather than cmpxchg() as the latter is unavailable
and unimplementable on some platforms and is actually unnecessary.

The use of cmpxchg() was to guard against two possibilities, neither of
which can actually occur:

 (1) The pending flag may have been unset or may be cleared.  However, given
     where it's called, the pending flag is _always_ set.  I don't think it
     can be unset whilst we're in set_wq_data().

     Once the work is enqueued to be actually run, the only way off the queue
     is for it to be actually run.

     If it's a delayed work item, then the bit can't be cleared by the timer
     because we haven't started the timer yet.  Also, the pending bit can't be
     cleared by cancelling the delayed work _until_ the work item has had its
     timer started.

 (2) The workqueue pointer might change.  This can only happen in two cases:

     (a) The work item has just been queued to actually run, and so we're
         protected by the appropriate workqueue spinlock.

     (b) A delayed work item is being queued, and so the timer hasn't been
     	 started yet, and so no one else knows about the work item or can
     	 access it (the pending bit protects us).

     Besides, set_wq_data() _sets_ the workqueue pointer unconditionally, so
     it can be assigned instead.

So, replacing the set_wq_data() with a straight assignment would be okay
in most cases.

The problem is where we end up tangling with test_and_set_bit() emulated
using spinlocks, and even then it's not a problem _provided_
test_and_set_bit() doesn't attempt to modify the word if the bit was
set.

If that's a problem, then a bitops-proofed assignment will be required -
equivalent to atomic_set() vs other atomic_xxx() ops.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq
Signed-off-by: NKars de Jong <jongk@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove bogus comments about unexporting cache_{push,clear}(), as inline
dma_cache_maintenance() (used by at least bionet and pamsnet) calls them.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Atari IDE: The interrupt needs SA_SHIRQ now to get registered.
Signed-off-by: NMichael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sun3 scsi drivers compile/work again (though with way too many warnings...)

Tested on 3/50, 3/60.
Signed-off-by: NSam Creasey <sammy@sammy.net>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

General compile fixes for 2.6.16 for sun3, and some updates to make the new
bootloader work correctly.  Tested on 3/50, 3/60, 3/80.
Signed-off-by: NSam Creasey <sammy@sammy.net>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- 7990: request_irq() should have SA_SHIRQ flag set
- hplance_init() printed dev->name before register_netdev() had filled it in
Signed-off-by: NKars de Jong <jongk@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETLINK]: Put {IFA,IFLA}_{RTA,PAYLOAD} macros back for userspace.
  [NET_SCHED] sch_htb: turn intermediate classes into leaves
  [NET_SCHED] sch_cbq: deactivating when grafting, purging etc.
  [XFRM]: Fix XFRMGRP_REPORT to use correct multicast group.
  [NET]: Force a cache line split in hh_cache in SMP.
  [NETPOLL]: make arp replies through netpoll use mac address of sender
  [NETLINK]: Restore API compatibility of address and neighbour bits
  [AX.25]: Fix default address and broadcast address initialization.
  [AX.25]: Constify ax25 utility functions
  [BNX2]: Add an error check.
  [NET]: Convert hh_lock to seqlock.

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [PATCH] add STB810 support (Philips PNX8550-based)
  [MIPS] Qemu now has an ELF loader.
  [MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users
  [MIPS] Optimize csum_partial for 64bit kernel
  [MIPS] Optimize flow of csum_partial
  [MIPS] Make csum_partial more readable
  [MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines

GLIBC uses them etc.

They are guarded by ifndef __KERNEL__ so nobody will start
accidently using them in the kernel again, it's just for
userspace.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- turn intermediate classes into leaves again when their
  last child is deleted (struct htb_class changed)
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- deactivating of active classes when q.qlen drops to zero
  (cbq_drop)

- a redundant instruction removed from cbq_deactivate_class

PS: probably htb_deactivate in htb_delete and
cbq_deactivate_class in cbq_delete are also
redundant now.
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XFRMGRP_REPORT uses 0x10 which is a group that belongs
to events. The correct value is 0x20.
We should really be using xfrm_nlgroups going forward; it was tempting
to delete the definition of XFRMGRP_REPORT but it would break at
least iproute2.
Signed-off-by: NJ Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hh_lock was converted from rwlock to seqlock by Stephen.

To have a 100% benefit of this change, I suggest to place read mostly fields
of hh_cache in a separate cache line, because hh_refcnt may be changed quite
frequently on some busy machines.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Back in 2.4 arp requests that were recevied by netpoll were processed
in netconsole_receive_skb, where they were responded to using the src
mac of the request sender.  In the 2.6 kernel arp_reply is responsible
for this function, but instead of using the src mac address of the
incomming request, the stored mac address that was registered for the
netconsole application is used.  While this is usually ok, it can lead
to failures in netpoll in some situations (specifically situations
where a network may have two gateways, as arp requests from one may be
responded to using the mac address of the other).  This patch reverts
the behavior to what we had in 2.4, in which all arp requests are sent
back using the src address of the request sender.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NChris Lalancette <clalance@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Restore API compatibility due to bits moved from rtnetlink.h to
separate headers.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only the callsign but not the SSID part of an AX.25 address is ASCII
based but Linux by initializes the SSID which should be just a 4-bit
number from ASCII anyway.

Fix that and convert the code to use a shared constant for both default
addresses.  While at it, use the same style for null_ax25_address also.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a missing error check spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The hard header cache is in the main output path, so using
seqlock instead of reader/writer lock should reduce overhead.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

So nuke kludge for flat binaries.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Now that i8259A_chip uses new irq flow handler select
GENERIC_HARDIRQS_NO__DO_IRQ on some more platforms.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make csum_partial 64-bit powered.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Delete dead codes at end of the function and move small_csumcopy
there.  This makes some labels (maybe_end_cruft, small_memcpy,
end_bytes, out) needless and eliminates some branches.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Use standard o32 register name instead of T0, T1, etc, like memcpy.S.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>