Add a new driver for the ambient light/proximity sensor
device. The driver exposes three channels: light_clear
light_ir and proximity. It also supports triggered buffer,
high and low ambient light threshold event and proximity
detection events.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

chip has four 16-bit channels for red, green, blue, clear color
intensity; driver supports the TCS3x7x family of devices and was
tested with a TCS34725 chip; further information here:
http://www.ams.com/eng/Products/Light-Sensors/Color-Sensor/TCS34725

v2 (thanks to Jonathan Cameron):
* drop dynamic buffer allocation, buffer is in tcs3472_data
* limit sysfs output to PAGE_SIZE
* check val2 == 0 when writing CALIBSCALE
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Cc: Jon Brenner <jon.brenner@ams.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

At the moment the number of channels specified is dictated by the first
sensor supported by the driver. As we add support for more sensors this
is likely to vary. Instead of using the ARRAY_SIZE() of the LPS331AP's
channel specifier we'll use a new adaptable 'struct st_sensors' element
instead.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Due to the MACRO used, the task of reading, understanding and maintaining
the LPS331AP's channel descriptor is substantially difficult. This patch
is based on the view that it's better to have easy to read, maintainable
code than to save a few lines here and there. For that reason we're
expanding the array so initialisation is completed in full.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

They're currently named *_1_*, for 'Sensor 1', but the code will be much
more readable if we use the naming convention *_LPS331AP_* instead.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Saving a few lines of code.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some chips either don't support it or fail to provide adequate documentation,
so sometimes it's impossible to enable the feature even if it is supported.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

driver for the TSL4531 family of 16-bit I2C ambient light
sensors; information is here:
http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315

the chip offers simple lux output

v3 (thanks Lars-Peter Clausen):
* add mutex to when updating integration time
* fix chip ID checking
* code cleanups
v2:
* rename to tsl4351
* use INT_TIME
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Integration time is in seconds; it controls the measurement
time and influences the gain of a sensor.

There are two typical ways that scaling is implemented in a device:
1) input amplifier,
2) reference to the ADC is changed.
These both result in the accuracy of the ADC varying (by applying its
sampling over a more relevant range).

Integration time is a way of dealing with noise inherent in the analog
sensor itself.  In the case of a light sensor, a mixture of photon noise
and device specific noise.  Photon noise is dealt with by either improving
the efficiency of the sensor, (more photons actually captured) which is not
easily varied dynamically, or by integrating the measurement over a longer
time period.  Note that this can also be thought of as an averaging of a
number of individual samples and is infact sometimes implemented this way.
Altering integration time implies that the duration of a measurement changes,
a fact the device's user may be interested in.

Hence it makes sense to distinguish between integration time and simple
scale. In some devices both types of control are present and whilst they
will have similar effects on the amplitude of the reading, their effect
on the noise of the measurements will differ considerably.

Used by adjd_s311, tsl4531, tcs3472
The following drivers have similar controls (and could be adapted):
* tsl2563 (integration time is controlled via CALIBSCALE among other things)
* tsl2583 (has integration_time device_attr, but driver doesn't use channels yet)
* tsl2x7x (has integration_time attr)
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Cc: Jon Brenner <jon.brenner@ams.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'break' after return is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'break' after return is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'break' after return is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'break' after return is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Sysfs access to all channels.
Signed-off-by: NAngelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

For at91 boards, there are different IPs for adc. Different IPs has different
STARTUP & PRESCAL mask in ADC_MR.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

As use the multiple compatible string, we can remove hardware register in dt.

CC: devicetree@vger.kernel.org
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix to return -EINTR in the error handling case instead
of 0 (ret is assigned after goto, which has no effect),
as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds IIO driver for Bosch BMA180 triaxial
acceleration sensor.
http://dlnmh9ip6v2uc.cloudfront.net/datasheets/
		Sensors/Accelerometers/BST-BMA180-DS000-07_2.pdf
Signed-off-by: NOleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc and devm_request_threaded_irq makes
code simpler.
Signed-off-by: NOleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

using word reads, no need for HI/LO register #defines
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

IIO_VAL_INT_PLUS_MICRO is the default, no need to return it explicitly
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: Nsrinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add a resource managed devm_iio_trigger_alloc()/devm_iio_triger_free()
to automatically clean up triggers allocated by IIO drivers, thus
leading to simplified IIO drivers code.
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NKyunmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC,
known also as Phoenix and PhoenixLite.

The TWL6030 and TWL6032 have GPADC with 17 and 19 channels
respectively. Some channels have current source and are used for
measuring voltage drop on resistive load for detecting battery ID
resistance, or measuring voltage drop on NTC resistors for external
temperature measurements. Some channels measure voltage, (i.e. battery
voltage), and have voltage dividers, thus, capable to scale voltage.
Some channels are dedicated for measuring die temperature.

Some channels are calibrated in 2 points, having offsets from ideal
values kept in trim registers. This is used to correct measurements.

The differences between GPADC in TWL6030 and TWL6032:
- 10 bit vs 12 bit ADC;
- 17 vs 19 channels;
- channels have different purpose(i.e. battery voltage
  channel 8 vs channel 18);
- trim values are interpreted differently.

Based on the driver patched from Balaji TK, Graeme Gregory, Ambresh K,
Girish S Ghongdemath.
Signed-off-by: NBalaji T K <balajitk@ti.com>
Signed-off-by: NGraeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: NOleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Using devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Christian Strobel <christian.strobel@iis.fraunhofer.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>