The TIF_USEDFPU bit is always 0 for s390 and it is not tested anywhere.
Remove the bit. At the same time remove the calls to clear_used_math()
as well. The PF_USED_MATH bit is never set for s390 either.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g
s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g

The syscall enter/exit tracing is no longer specific to just ftrace, so
they now have names that reflect their tie to tracepoints instead.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Pull the initial preempt_count value into a single
definition site.

Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.

The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.

Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

System call tracer support for s390.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Enable secure computing on s390 as well.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Currently the storage of the machine flags is a globally exported unsigned
long long variable. By moving the storage location into the lowcore struct we
allow assembler code to check machine_flags directly even without needing a
register. Addtionally the lowcore and therefore the machine flags too will be
in cache most of the time.
Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The unit of the cputime accouting values that are stored per process is
currently a microsecond. The CPU timer has a maximum granularity of
2**-12 microseconds. There is no benefit in storing the per process values
in the lesser precision and there is the disadvantage that the backend
has to do the rounding to microseconds. The better solution is to use
the maximum granularity of the CPU timer as cputime unit.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We got a stack overflow with a small stack configuration on a 32 bit
system. It just looks like as 4kb isn't enough and too dangerous.
So lets get rid of 4kb stacks on 32 bit.

But one thing I completely dislike about the call trace below is that
just for debugging or tracing purposes sprintf gets called (cio_start_key):

	/* process condition code */
	sprintf(dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT(4, dbf_txt);

But maybe its just me who thinks that this could be done better.

    <4>Kernel stack overflow.
    <4>Modules linked in: dm_multipath sunrpc bonding qeth_l2 dm_mod qeth ccwgroup vmur
    <4>CPU: 1 Not tainted 2.6.27-30.x.20081015-s390default #1
    <4>Process httpd (pid: 3807, task: 20ae2df8, ksp: 1666fb78)
    <4>Krnl PSW : 040c0000 8027098a (number+0xe/0x348)
    <4>           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0
    <4>Krnl GPRS: 00d43318 0027097c 1666f277 9666f270
    <4>           00000000 00000000 0000000a ffffffff
    <4>           9666f270 1666f228 1666f277 1666f098
    <4>           00000002 80270982 80271016 1666f098
    <4>Krnl Code: 8027097e: f0340dd0a7f1	srp	3536(4,%r0),2033(%r10),4
    <4>           80270984: 0f00		clcl	%r0,%r0
    <4>           80270986: a7840001		brc	8,80270988
    <4>          >8027098a: 18ef		lr	%r14,%r15
    <4>           8027098c: a7faff68		ahi	%r15,-152
    <4>           80270990: 18bf		lr	%r11,%r15
    <4>           80270992: 18a2		lr	%r10,%r2
    <4>           80270994: 1893		lr	%r9,%r3

Modified calltrace with annotated stackframe size of each function:

stackframe size
    |
 0 304 vsnprintf+850 [0x271016]
 1  72 sprintf+74 [0x271522]
 2  56 cio_start_key+262 [0x2d4c16]
 3  56 ccw_device_start_key+222 [0x2dfe92]
 4  56 ccw_device_start+40 [0x2dff28]
 5  48 raw3215_start_io+104 [0x30b0f8]
 6  56 raw3215_write+494 [0x30ba0a]
 7  40 con3215_write+68 [0x30bafc]
 8  40 __call_console_drivers+146 [0x12b0fa]
 9  32 _call_console_drivers+102 [0x12b192]
10  64 release_console_sem+268 [0x12b614]
11 168 vprintk+462 [0x12bca6]
12  72 printk+68 [0x12bfd0]
13 256 __print_symbol+50 [0x15a882]
14  56 __show_trace+162 [0x103d06]
15  32 show_trace+224 [0x103e70]
16  48 show_stack+152 [0x103f20]
17  56 dump_stack+126 [0x104612]
18  96 __alloc_pages_internal+592 [0x175004]
19  80 cache_alloc_refill+776 [0x196f3c]
20  40 __kmalloc+258 [0x1972ae]
21  40 __alloc_skb+94 [0x328086]
22  32 pskb_copy+50 [0x328252]
23  32 skb_realloc_headroom+110 [0x328a72]
24 104 qeth_l2_hard_start_xmit+378 [0x7803bfde]
25  56 dev_hard_start_xmit+450 [0x32ef6e]
26  56 __qdisc_run+390 [0x3425d6]
27  48 dev_queue_xmit+410 [0x331e06]
28  40 ip_finish_output+308 [0x354ac8]
29  56 ip_output+218 [0x355b6e]
30  24 ip_local_out+56 [0x354584]
31 120 ip_queue_xmit+300 [0x355cec]
32  96 tcp_transmit_skb+812 [0x367da8]
33  40 tcp_push_one+158 [0x369fda]
34 112 tcp_sendmsg+852 [0x35d5a0]
35 240 sock_sendmsg+164 [0x32035c]
36  56 kernel_sendmsg+86 [0x32064a]
37  88 sock_no_sendpage+98 [0x322b22]
38 104 tcp_sendpage+70 [0x35cc1e]
39  48 sock_sendpage+74 [0x31eb66]
40  64 pipe_to_sendpage+102 [0x1c4b2e]
41  64 __splice_from_pipe+120 [0x1c5340]
42  72 splice_from_pipe+90 [0x1c57e6]
43  56 generic_splice_sendpage+38 [0x1c5832]
44  48 do_splice_from+104 [0x1c4c38]
45  48 direct_splice_actor+52 [0x1c4c88]
46  80 splice_direct_to_actor+180 [0x1c4f80]
47  72 do_splice_direct+70 [0x1c5112]
48  64 do_sendfile+360 [0x19de18]
49  72 sys_sendfile64+126 [0x19df32]
50 336 sysc_do_restart+18 [0x111a1a]
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch series introduces a cgroup subsystem that utilizes the swsusp
freezer to freeze a group of tasks.  It's immediately useful for batch job
management scripts.  It should also be useful in the future for
implementing container checkpoint/restart.

The freezer subsystem in the container filesystem defines a cgroup file
named freezer.state.  Reading freezer.state will return the current state
of the cgroup.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This patch:

The first step in making the refrigerator() available to all
architectures, even for those without power management.

The purpose of such a change is to be able to use the refrigerator() in a
new control group subsystem which will implement a control group freezer.

[akpm@linux-foundation.org: fix sparc]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NPavel Machek <pavel@suse.cz>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@tuxonice.net>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* System call parameter and result access functions
* Add tracehook calls
* Split syscall_trace into two functions do_syscall_trace_enter and
  do_syscall_trace_exit
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We duplicate alloc/free_thread_info defines on many platforms (the
majority uses __get_free_pages/free_pages).  This patch defines common
defines and removes these duplicated defines.
__HAVE_ARCH_THREAD_INFO_ALLOCATOR is introduced for platforms that do
something different.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks.  Those low
bits are scarce, and are all used up now.  Renumber TIF_RESTORE_SIGMASK to
free one up.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The preempt_count in the thread_info structure must be initialized to 1.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add support for the new *at, pselect6 and ppoll system calls.  This includes
adding required support for TIF_RESTORE_SIGMASK.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

{get,put}_thread_info() were introduced in 2.5.4 and never
had been called by anything in the tree.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Improved machine check handling.  Kernel is now able to receive machine checks
while in kernel mode (system call, interrupt and program check handling).
Also register validation is now performed.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The preempt_count member of struct thread_info is currently either defined
as int, unsigned int or __s32 depending on arch.  This patch makes the type
of preempt_count an int on all archs.

Having preempt_count be an unsigned type prevents the catching of
preempt_count < 0 bugs, and using int on some archs and __s32 on others is
not exactely "neat" - much nicer when it's just int all over.

A previous version of this patch was already ACK'ed by Robert Love, and the
only change in this version of the patch compared to the one he ACK'ed is
that this one also makes sure the preempt_count member is consistently
commented.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!