Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 14 1月, 2018 1 次提交
    • E
      x86/mm/pkeys: Fix fill_sig_info_pkey · beacd6f7
      由 Eric W. Biederman 提交于 
      SEGV_PKUERR is a signal specific si_code which happens to have the same
numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF,
TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe
to just test the si_code the signal number must also be tested to prevent a
false positive in fill_sig_info_pkey.

This error was by inspection, and BUS_MCEERR_AR appears to be a real
candidate for confusion.  So pass in si_signo and check for SIG_SEGV to
verify that it is actually a SEGV_PKUERR

Fixes: 019132ff ("x86/mm/pkeys: Fill in pkey field in siginfo")
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180112203135.4669-2-ebiederm@xmission.com
      beacd6f7
  3. 20 12月, 2017 1 次提交
  5. 06 12月, 2017 1 次提交
  7. 16 11月, 2017 1 次提交
  9. 02 11月, 2017 2 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
    • R
      x86/mm: Relocate page fault error codes to traps.h · 1067f030
      由 Ricardo Neri 提交于 
      Up to this point, only fault.c used the definitions of the page fault error
codes. Thus, it made sense to keep them within such file. Other portions of
code might be interested in those definitions too. For instance, the User-
Mode Instruction Prevention emulation code will use such definitions to
emulate a page fault when it is unable to successfully copy the results
of the emulated instructions to user space.

While relocating the error code enumeration, the prefix X86_ is used to
make it consistent with the rest of the definitions in traps.h. Of course,
code using the enumeration had to be updated as well. No functional changes
were performed.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: ricardo.neri@intel.com
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/1509135945-13762-2-git-send-email-ricardo.neri-calderon@linux.intel.com
      1067f030
  11. 01 11月, 2017 1 次提交
    • V
      x86/mm: fix use-after-free of vma during userfaultfd fault · cb0631fd
      由 Vlastimil Babka 提交于 
      Syzkaller with KASAN has reported a use-after-free of vma->vm_flags in
__do_page_fault() with the following reproducer:

  mmap(&(0x7f0000000000/0xfff000)=nil, 0xfff000, 0x3, 0x32, 0xffffffffffffffff, 0x0)
  mmap(&(0x7f0000011000/0x3000)=nil, 0x3000, 0x1, 0x32, 0xffffffffffffffff, 0x0)
  r0 = userfaultfd(0x0)
  ioctl$UFFDIO_API(r0, 0xc018aa3f, &(0x7f0000002000-0x18)={0xaa, 0x0, 0x0})
  ioctl$UFFDIO_REGISTER(r0, 0xc020aa00, &(0x7f0000019000)={{&(0x7f0000012000/0x2000)=nil, 0x2000}, 0x1, 0x0})
  r1 = gettid()
  syz_open_dev$evdev(&(0x7f0000013000-0x12)="2f6465762f696e7075742f6576656e742300", 0x0, 0x0)
  tkill(r1, 0x7)

The vma should be pinned by mmap_sem, but handle_userfault() might (in a
return to userspace scenario) release it and then acquire again, so when
we return to __do_page_fault() (with other result than VM_FAULT_RETRY),
the vma might be gone.

Specifically, per Andrea the scenario is
 "A return to userland to repeat the page fault later with a
  VM_FAULT_NOPAGE retval (potentially after handling any pending signal
  during the return to userland). The return to userland is identified
  whenever FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in
  vmf->flags"

However, since commit a3c4fb7c ("x86/mm: Fix fault error path using
unsafe vma pointer") there is a vma_pkey() read of vma->vm_flags after
that point, which can thus become use-after-free.  Fix this by moving
the read before calling handle_mm_fault().
Reported-by: Nsyzbot <bot+6a5269ce759a7bb12754ed9622076dc93f65a1f6@syzkaller.appspotmail.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Suggested-by: NKirill A. Shutemov <kirill@shutemov.name>
Fixes: 3c4fb7c9c2e ("x86/mm: Fix fault error path using unsafe vma pointer")
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cb0631fd
  13. 25 9月, 2017 1 次提交
    • L
      x86/mm: Fix fault error path using unsafe vma pointer · a3c4fb7c
      由 Laurent Dufour 提交于 
      commit 7b2d0dba ("x86/mm/pkeys: Pass VMA down in to fault signal
generation code") passes down a vma pointer to the error path, but that is
done once the mmap_sem is released when calling mm_fault_error() from
__do_page_fault().

This is dangerous as the vma structure is no more safe to be used once the
mmap_sem has been released. As only the protection key value is required in
the error processing, we could just pass down this value.

Fix it by passing a pointer to a protection key value down to the fault
signal generation code. The use of a pointer allows to keep the check
generating a warning message in fill_sig_info_pkey() when the vma was not
known. If the pointer is valid, the protection value can be accessed by
deferencing the pointer.

[ tglx: Made *pkey u32 as that's the type which is passed in siginfo ]

Fixes: 7b2d0dba ("x86/mm/pkeys: Pass VMA down in to fault signal generation code")
Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1504513935-12742-1-git-send-email-ldufour@linux.vnet.ibm.com
      a3c4fb7c
  15. 23 9月, 2017 1 次提交
    • J
      x86/asm: Fix inline asm call constraints for Clang · f5caf621
      由 Josh Poimboeuf 提交于 
      For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:

  static inline void foo()
  {
	register void *__sp asm(_ASM_SP);
	asm("call bar" : "+r" (__sp))
  }

Unfortunately, that pattern causes Clang to corrupt the stack pointer.

The fix is easy: convert the stack pointer register variable to a global
variable.

It should be noted that the end result is different based on the GCC
version.  With GCC 6.4, this patch has exactly the same result as
before:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9820389		9491555		8816046		8516940
 after	9820389		9491555		8816046		8516940

With GCC 7.2, however, GCC's behavior has changed.  It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm.  (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.)  It's a bit
overkill, but the performance impact should be negligible.  And in fact,
there's a nice improvement with frame pointers disabled:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9796316		9468236		9076191		8790305
 after	9796957		9464267		9076381		8785949

So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      f5caf621
  17. 31 8月, 2017 1 次提交
  19. 29 8月, 2017 2 次提交
  21. 13 6月, 2017 1 次提交
  23. 14 3月, 2017 2 次提交
  25. 02 3月, 2017 1 次提交
  27. 15 12月, 2016 1 次提交
  29. 26 10月, 2016 1 次提交
    • J
      x86/dumpstack: Remove kernel text addresses from stack dump · bb5e5ce5
      由 Josh Poimboeuf 提交于 
      Printing kernel text addresses in stack dumps is of questionable value,
especially now that address randomization is becoming common.

It can be a security issue because it leaks kernel addresses.  It also
affects the usefulness of the stack dump.  Linus says:

  "I actually spend time cleaning up commit messages in logs, because
  useless data that isn't actually information (random hex numbers) is
  actively detrimental.

  It makes commit logs less legible.

  It also makes it harder to parse dumps.

  It's not useful. That makes it actively bad.

  I probably look at more oops reports than most people. I have not
  found the hex numbers useful for the last five years, because they are
  just randomized crap.

  The stack content thing just makes code scroll off the screen etc, for
  example."

The only real downside to removing these addresses is that they can be
used to disambiguate duplicate symbol names.  However such cases are
rare, and the context of the stack dump should be enough to be able to
figure it out.

There's now a 'faddr2line' script which can be used to convert a
function address to a file name and line:

  $ ./scripts/faddr2line ~/k/vmlinux write_sysrq_trigger+0x51/0x60
  write_sysrq_trigger+0x51/0x60:
  write_sysrq_trigger at drivers/tty/sysrq.c:1098

Or gdb can be used:

  $ echo "list *write_sysrq_trigger+0x51" |gdb ~/k/vmlinux |grep "is in"
  (gdb) 0xffffffff815b5d83 is in driver_probe_device (/home/jpoimboe/git/linux/drivers/base/dd.c:378).

(But note that when there are duplicate symbol names, gdb will only show
the first symbol it finds.  faddr2line is recommended over gdb because
it handles duplicates and it also does function size checking.)

Here's an example of what a stack dump looks like after this change:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: sysrq_handle_crash+0x45/0x80
  PGD 36bfa067 [   29.650644] PUD 7aca3067
  Oops: 0002 [#1] PREEMPT SMP
  Modules linked in: ...
  CPU: 1 PID: 786 Comm: bash Tainted: G            E   4.9.0-rc1+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
  task: ffff880078582a40 task.stack: ffffc90000ba8000
  RIP: 0010:sysrq_handle_crash+0x45/0x80
  RSP: 0018:ffffc90000babdc8 EFLAGS: 00010296
  RAX: ffff880078582a40 RBX: 0000000000000063 RCX: 0000000000000001
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000292
  RBP: ffffc90000babdc8 R08: 0000000b31866061 R09: 0000000000000000
  R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
  R13: 0000000000000007 R14: ffffffff81ee8680 R15: 0000000000000000
  FS:  00007ffb43869700(0000) GS:ffff88007d400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 000000007a3e9000 CR4: 00000000001406e0
  Stack:
   ffffc90000babe00 ffffffff81572d08 ffffffff81572bd5 0000000000000002
   0000000000000000 ffff880079606600 00007ffb4386e000 ffffc90000babe20
   ffffffff81573201 ffff880036a3fd00 fffffffffffffffb ffffc90000babe40
  Call Trace:
   __handle_sysrq+0x138/0x220
   ? __handle_sysrq+0x5/0x220
   write_sysrq_trigger+0x51/0x60
   proc_reg_write+0x42/0x70
   __vfs_write+0x37/0x140
   ? preempt_count_sub+0xa1/0x100
   ? __sb_start_write+0xf5/0x210
   ? vfs_write+0x183/0x1a0
   vfs_write+0xb8/0x1a0
   SyS_write+0x58/0xc0
   entry_SYSCALL_64_fastpath+0x1f/0xc2
  RIP: 0033:0x7ffb42f55940
  RSP: 002b:00007ffd33bb6b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000046 RCX: 00007ffb42f55940
  RDX: 0000000000000002 RSI: 00007ffb4386e000 RDI: 0000000000000001
  RBP: 0000000000000011 R08: 00007ffb4321ea40 R09: 00007ffb43869700
  R10: 00007ffb43869700 R11: 0000000000000246 R12: 0000000000778a10
  R13: 00007ffd33bb5c00 R14: 0000000000000007 R15: 0000000000000010
  Code: 34 e8 d0 34 bc ff 48 c7 c2 3b 2b 57 81 be 01 00 00 00 48 c7 c7 e0 dd e5 81 e8 a8 55 ba ff c7 05 0e 3f de 00 01 00 00 00 0f ae f8 <c6> 04 25 00 00 00 00 01 5d c3 e8 4c 49 bc ff 84 c0 75 c3 48 c7
  RIP: sysrq_handle_crash+0x45/0x80 RSP: ffffc90000babdc8
  CR2: 0000000000000000
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/69329cb29b8f324bb5fcea14d61d224807fb6488.1477405374.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      bb5e5ce5
  31. 28 9月, 2016 1 次提交
  33. 20 9月, 2016 1 次提交
  35. 09 9月, 2016 1 次提交
  37. 08 9月, 2016 1 次提交
  39. 27 7月, 2016 1 次提交
  41. 15 7月, 2016 3 次提交
  43. 20 5月, 2016 1 次提交
  45. 03 3月, 2016 1 次提交
    • D
      x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA · e2155543
      由 Dave Hansen 提交于 
      Andrey Wagin reported that a simple test case was broken by:

	2b5f7d013fc ("mm/core, x86/mm/pkeys: Add execute-only protection keys support")

This test case creates an unreadable VMA and my patch assumed
that all writes must be to readable VMAs.

The simplest fix for this is to remove the pkey-related bits
in access_error().  For execute-only support, I believe the
existing version is sufficient because the permissions we
are trying to enforce are entirely expressed in vma->vm_flags.
We just depend on pkeys to get *an* exception, it does not
matter that PF_PK was set, or even what state PKRU is in.

I will re-add the necessary bits with the full pkeys
implementation that includes the new syscalls.

The three cases that matter are:

1. If a write to an execute-only VMA occurs, we will see PF_WRITE
   set, but !VM_WRITE on the VMA, and return 1.  All execute-only
   VMAs have VM_WRITE clear by definition.
2. If a read occurs on a present PTE, we will fall in to the "read,
   present" case and return 1.
3. If a read occurs to a non-present PTE, we will miss the "read,
   not present" case, because the execute-only VMA will have
   VM_EXEC set, and we will properly return 0 allowing the PTE to
   be populated.

Test program:

 int main()
 {
	int *p;
	p = mmap(NULL, 4096, PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
	p[0] = 1;

	return 0;
 }

Reported-by: Andrey Wagin <avagin@gmail.com>,
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: linux-next@vger.kernel.org
Fixes: 62b5f7d0 ("mm/core, x86/mm/pkeys: Add execute-only protection keys support")
Link: http://lkml.kernel.org/r/20160301194133.65D0110C@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      e2155543
  47. 19 2月, 2016 3 次提交
    • D
      mm/core, x86/mm/pkeys: Add execute-only protection keys support · 62b5f7d0
      由 Dave Hansen 提交于 
      Protection keys provide new page-based protection in hardware.
But, they have an interesting attribute: they only affect data
accesses and never affect instruction fetches.  That means that
if we set up some memory which is set as "access-disabled" via
protection keys, we can still execute from it.

This patch uses protection keys to set up mappings to do just that.
If a user calls:

	mmap(..., PROT_EXEC);
or
	mprotect(ptr, sz, PROT_EXEC);

(note PROT_EXEC-only without PROT_READ/WRITE), the kernel will
notice this, and set a special protection key on the memory.  It
also sets the appropriate bits in the Protection Keys User Rights
(PKRU) register so that the memory becomes unreadable and
unwritable.

I haven't found any userspace that does this today.  With this
facility in place, we expect userspace to move to use it
eventually.  Userspace _could_ start doing this today.  Any
PROT_EXEC calls get converted to PROT_READ inside the kernel, and
would transparently be upgraded to "true" PROT_EXEC with this
code.  IOW, userspace never has to do any PROT_EXEC runtime
detection.

This feature provides enhanced protection against leaking
executable memory contents.  This helps thwart attacks which are
attempting to find ROP gadgets on the fly.

But, the security provided by this approach is not comprehensive.
The PKRU register which controls access permissions is a normal
user register writable from unprivileged userspace.  An attacker
who can execute the 'wrpkru' instruction can easily disable the
protection provided by this feature.

The protection key that is used for execute-only support is
permanently dedicated at compile time.  This is fine for now
because there is currently no API to set a protection key other
than this one.

Despite there being a constant PKRU value across the entire
system, we do not set it unless this feature is in use in a
process.  That is to preserve the PKRU XSAVE 'init state',
which can lead to faster context switches.

PKRU *is* a user register and the kernel is modifying it.  That
means that code doing:

	pkru = rdpkru()
	pkru |= 0x100;
	mmap(..., PROT_EXEC);
	wrpkru(pkru);

could lose the bits in PKRU that enforce execute-only
permissions.  To avoid this, we suggest avoiding ever calling
mmap() or mprotect() when the PKRU value is expected to be
unstable.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Piotr Kwapulinski <kwapulinski.piotr@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: keescook@google.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210240.CB4BB5CA@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      62b5f7d0
    • D
      mm/core, x86/mm/pkeys: Differentiate instruction fetches · d61172b4
      由 Dave Hansen 提交于 
      As discussed earlier, we attempt to enforce protection keys in
software.

However, the code checks all faults to ensure that they are not
violating protection key permissions.  It was assumed that all
faults are either write faults where we check PKRU[key].WD (write
disable) or read faults where we check the AD (access disable)
bit.

But, there is a third category of faults for protection keys:
instruction faults.  Instruction faults never run afoul of
protection keys because they do not affect instruction fetches.

So, plumb the PF_INSTR bit down in to the
arch_vma_access_permitted() function where we do the protection
key checks.

We also add a new FAULT_FLAG_INSTRUCTION.  This is because
handle_mm_fault() is not passed the architecture-specific
error_code where we keep PF_INSTR, so we need to encode the
instruction fetch information in to the arch-generic fault
flags.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210224.96928009@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      d61172b4
    • D
      x86/mm/pkeys: Optimize fault handling in access_error() · 07f146f5
      由 Dave Hansen 提交于 
      We might not strictly have to make modifictions to
access_error() to check the VMA here.

If we do not, we will do this:

 1. app sets VMA pkey to K
 2. app touches a !present page
 3. do_page_fault(), allocates and maps page, sets pte.pkey=K
 4. return to userspace
 5. touch instruction reexecutes, but triggers PF_PK
 6. do PKEY signal

What happens with this patch applied:

 1. app sets VMA pkey to K
 2. app touches a !present page
 3. do_page_fault() notices that K is inaccessible
 4. do PKEY signal

We basically skip the fault that does an allocation.

So what this lets us do is protect areas from even being
*populated* unless it is accessible according to protection
keys.  That seems handy to me and makes protection keys work
more like an mprotect()'d mapping.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210222.EBB63D8C@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      07f146f5
  49. 18 2月, 2016 6 次提交
    • D
      mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys · 33a709b2
      由 Dave Hansen 提交于 
      Today, for normal faults and page table walks, we check the VMA
and/or PTE to ensure that it is compatible with the action.  For
instance, if we get a write fault on a non-writeable VMA, we
SIGSEGV.

We try to do the same thing for protection keys.  Basically, we
try to make sure that if a user does this:

	mprotect(ptr, size, PROT_NONE);
	*ptr = foo;

they see the same effects with protection keys when they do this:

	mprotect(ptr, size, PROT_READ|PROT_WRITE);
	set_pkey(ptr, size, 4);
	wrpkru(0xffffff3f); // access disable pkey 4
	*ptr = foo;

The state to do that checking is in the VMA, but we also
sometimes have to do it on the page tables only, like when doing
a get_user_pages_fast() where we have no VMA.

We add two functions and expose them to generic code:

	arch_pte_access_permitted(pte_flags, write)
	arch_vma_access_permitted(vma, write)

These are, of course, backed up in x86 arch code with checks
against the PTE or VMA's protection key.

But, there are also cases where we do not want to respect
protection keys.  When we ptrace(), for instance, we do not want
to apply the tracer's PKRU permissions to the PTEs from the
process being traced.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Dominik Vogt <vogt@linux.vnet.ibm.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      33a709b2
    • D
      x86/mm/pkeys: Fill in pkey field in siginfo · 019132ff
      由 Dave Hansen 提交于 
      This fills in the new siginfo field: si_pkey to indicate to
userspace which protection key was set on the PTE that we faulted
on.

Note though that *ALL* protection key faults have to be generated
by a valid, present PTE at some point.  But this code does no PTE
lookups which seeds odd.  The reason is that we take advantage of
the way we generate PTEs from VMAs.  All PTEs under a VMA share
some attributes.  For instance, they are _all_ either PROT_READ
*OR* PROT_NONE.  They also always share a protection key, so we
never have to walk the page tables; we just use the VMA.

Note that _pkey is a 64-bit value.  The current hardware only
supports 4-bit protection keys.  We do this because there is
_plenty_ of space in _sigfault and it is possible that future
processors would support more than 4 bits of protection keys.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210213.ABC488FA@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      019132ff
    • D
      x86/mm/pkeys: Pass VMA down in to fault signal generation code · 7b2d0dba
      由 Dave Hansen 提交于 
      During a page fault, we look up the VMA to ensure that the fault
is in a region with a valid mapping.  But, in the top-level page
fault code we don't need the VMA for much else.  Once we have
decided that an access is bad, we are going to send a signal no
matter what and do not need the VMA any more.  So we do not pass
it down in to the signal generation code.

But, for protection keys, we need the VMA.  It tells us *which*
protection key we violated if we get a PF_PK.  So, we need to
pass the VMA down and fill in siginfo->si_pkey.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210211.AD3B36A3@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7b2d0dba
    • D
      x86/mm/pkeys: Add new 'PF_PK' page fault error code bit · b3ecd515
      由 Dave Hansen 提交于 
      Note: "PK" is how the Intel SDM refers to this bit, so we also
use that nomenclature.

This only defines the bit, it does not plumb it anywhere to be
handled.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210207.DA7B43E6@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      b3ecd515
    • T
      x86/mm: Expand the exception table logic to allow new handling options · 548acf19
      由 Tony Luck 提交于 
      Huge amounts of help from  Andy Lutomirski and Borislav Petkov to
produce this. Andy provided the inspiration to add classes to the
exception table with a clever bit-squeezing trick, Boris pointed
out how much cleaner it would all be if we just had a new field.

Linus Torvalds blessed the expansion with:

  ' I'd rather not be clever in order to save just a tiny amount of space
    in the exception table, which isn't really criticial for anybody. '

The third field is another relative function pointer, this one to a
handler that executes the actions.

We start out with three handlers:

 1: Legacy - just jumps the to fixup IP
 2: Fault - provide the trap number in %ax to the fixup code
 3: Cleaned up legacy for the uaccess error hack
Signed-off-by: NTony Luck <tony.luck@intel.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f6af78fcbd348cf4939875cfda9c19689b5e50b8.1455732970.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      548acf19
    • T
      x86/mm: Fix vmalloc_fault() to handle large pages properly · f4eafd8b
      由 Toshi Kani 提交于 
      A kernel page fault oops with the callstack below was observed
when a read syscall was made to a pmem device after a huge amount
(>512GB) of vmalloc ranges was allocated by ioremap() on a x86_64
system:

     BUG: unable to handle kernel paging request at ffff880840000ff8
     IP: vmalloc_fault+0x1be/0x300
     PGD c7f03a067 PUD 0
     Oops: 0000 [#1] SM
     Call Trace:
        __do_page_fault+0x285/0x3e0
        do_page_fault+0x2f/0x80
        ? put_prev_entity+0x35/0x7a0
        page_fault+0x28/0x30
        ? memcpy_erms+0x6/0x10
        ? schedule+0x35/0x80
        ? pmem_rw_bytes+0x6a/0x190 [nd_pmem]
        ? schedule_timeout+0x183/0x240
        btt_log_read+0x63/0x140 [nd_btt]
         :
        ? __symbol_put+0x60/0x60
        ? kernel_read+0x50/0x80
        SyS_finit_module+0xb9/0xf0
        entry_SYSCALL_64_fastpath+0x1a/0xa4

Since v4.1, ioremap() supports large page (pud/pmd) mappings in
x86_64 and PAE.  vmalloc_fault() however assumes that the vmalloc
range is limited to pte mappings.

vmalloc faults do not normally happen in ioremap'd ranges since
ioremap() sets up the kernel page tables, which are shared by
user processes.  pgd_ctor() sets the kernel's PGD entries to
user's during fork().  When allocation of the vmalloc ranges
crosses a 512GB boundary, ioremap() allocates a new pud table
and updates the kernel PGD entry to point it.  If user process's
PGD entry does not have this update yet, a read/write syscall
to the range will cause a vmalloc fault, which hits the Oops
above as it does not handle a large page properly.

Following changes are made to vmalloc_fault().

64-bit:

 - No change for the PGD sync operation as it handles large
   pages already.
 - Add pud_huge() and pmd_huge() to the validation code to
   handle large pages.
 - Change pud_page_vaddr() to pud_pfn() since an ioremap range
   is not directly mapped (while the if-statement still works
   with a bogus addr).
 - Change pmd_page() to pmd_pfn() since an ioremap range is not
   backed by struct page (while the if-statement still works
   with a bogus addr).

32-bit:
 - No change for the sync operation since the index3 PGD entry
   covers the entire vmalloc range, which is always valid.
   (A separate change to sync PGD entry is necessary if this
    memory layout is changed regardless of the page size.)
 - Add pmd_huge() to the validation code to handle large pages.
   This is for completeness since vmalloc_fault() won't happen
   in ioremap'd ranges as its PGD entry is always valid.
Reported-by: NHenning Schild <henning.schild@siemens.com>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: <stable@vger.kernel.org> # 4.1+
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/1455758214-24623-1-git-send-email-toshi.kani@hpe.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      f4eafd8b
  51. 31 7月, 2015 2 次提交
  53. 19 5月, 2015 1 次提交
    • D
      mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler · 70ffdb93
      由 David Hildenbrand 提交于 
      Introduce faulthandler_disabled() and use it to check for irq context and
disabled pagefaults (via pagefault_disable()) in the pagefault handlers.

Please note that we keep the in_atomic() checks in place - to detect
whether in irq context (in which case preemption is always properly
disabled).

In contrast, preempt_disable() should never be used to disable pagefaults.
With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt
counter, and therefore the result of in_atomic() differs.
We validate that condition by using might_fault() checks when calling
might_sleep().

Therefore, add a comment to faulthandler_disabled(), describing why this
is needed.

faulthandler_disabled() and pagefault_disable() are defined in
linux/uaccess.h, so let's properly add that include to all relevant files.

This patch is based on a patch from Thomas Gleixner.
Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      70ffdb93