Replace the specification of two data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of data structures by references to
a local variable as the parameter for the operator "sizeof"
to make the corresponding size determination a bit safer.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of two data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "kmalloc_array".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data structure by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written …

Thus fix the affected source code places.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the specification of two data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "devm_kmalloc_array".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data type by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bonding driver changes the skb->dev to the bonding-master before
passing the packet to stack for further processing. This, however
does not make sense for the link-local packets and it loses "the
link info" once its skb->dev is changed to bonding-master.  This
patch changes this behavior for link-local packets by not changing
the skb->dev to the bonding-master and maintaining it as it is,
i.e. the link on which the packet arrived.
Signed-off-by: NChonggang Li <chonggangli@google.com>
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse
for doit functions that call it directly.

This is the first step to using extended error reporting in rtnetlink.
>From here individual subsystems can be updated to set netlink_ext_ack as
needed.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The netvsc device supports full duplex by default.
This warnings in log from bonding device which did not like
seeing UNKNOWN duplex.
Signed-off-by: NSimon Xiao <sixiao@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The statistics functionis called with RTNL held during probe
but with RCU held during access from /proc and elsewhere.
This is safe so update the lockdep annotation.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a copy and paste buglet.  We meant to test for ->write_mmd but
we test for ->read_mmd.

Fixes: 1ee6b9bc ("net: phy: make phy_(read|write)_mmd() generic MMD accessors")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recently, suspend/resume and WOL support are added into mvneta driver.
If we enable WOL, then we get some error as below on Marvell BG4CT
platforms during suspend:

[  184.149723] dpm_run_callback(): mdio_bus_suspend+0x0/0x50 returns -16
[  184.149727] PM: Device f7b62004.mdio-mi:00 failed to suspend: error -16

-16 means -EBUSY, phy_suspend() will return -EBUSY if it finds the
device has WOL enabled.

We fix this issue by properly setting the netdev's power.can_wakeup
and power.wakeup, i.e

1. in mvneta_mdio_probe(), call device_set_wakeup_capable() to set
power.can_wakeup if the phy support WOL.

2. in mvneta_ethtool_set_wol(), call device_set_wakeup_enable() to
set power.wakeup if WOL has been successfully enabled in phy.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the loop in phy_supported_speeds().
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phylib has some undesirable behaviour when forcing a link mode through
ethtool.  phylib uses this code:

	idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
			features);

to find an index in the settings table.  phy_find_setting() starts at
index 0, and scans upwards looking for an exact speed and duplex match.
When it doesn't find it, it returns MAX_NUM_SETTINGS - 1, which is
10baseT-Half duplex.

phy_find_valid() then scans from the point (and effectively only checks
one entry) before bailing out, returning MAX_NUM_SETTINGS - 1.

phy_sanitize_settings() then sets ->speed to SPEED_10 and ->duplex to
DUPLEX_HALF whether or not 10baseT-Half is supported or not.  This goes
against all the comments against these functions, and 10baseT-Half may
not even be supported by the hardware.

Rework these functions, introducing a new method of scanning the table.
There are two modes of lookup that phylib wants: exact, and inexact.

- in exact mode, we return either an exact match or failure
- in inexact mode, we return an exact match if it exists, a match at
  the highest speed that is not greater than the requested speed
  (ignoring duplex), or failing that, the lowest supported speed, or
  failure.

The biggest difference is that we always check whether the entry is
supported before further consideration, so all unsupported entries are
not considered as candidates.

This results in arguably saner behaviour, better matches the comments,
and is probably what users would expect.

This becomes important as ethernet speeds increase, PHYs exist which do
not support the 10Mbit speeds, and half-duplex is likely to become
obsolete - it's already not even an option on 10Gbit and faster links.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for aRFS for TCP and UDP
protocols with IPv4/IPv6.
Signed-off-by: NManish Chopra <manish.chopra@cavium.com>
Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds necessary APIs to interface with
qede aRFS support in successive patch.

It also reserves separate PTT entry for aRFS,
[as being in fastpath flow] for hardware access instead of
trying to acquire it at run time from the ptt pool.
Signed-off-by: NManish Chopra <manish.chopra@cavium.com>
Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This chip is used by a lot of embedded devices and also by the Raspberry
Pi 1, 2 & 3 which were created to promote the study of computer
sciences. Students wanting to learn kernel / network device driver
programming through those devices can only rely on the Linux kernel
driver source to make their own.

This commit adds a lot of comments to the registers definition to expand
the register names.

Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NMartin Wetterwald <martin@wetterwald.eu>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NSteve Glendinning <steve.glendinning@shawell.net>
Acked-by: NWoojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add check for bit IB_QP_CREATE_NETIF_QP while creating QP.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the driver support only ethernet eswitch, and we want to
protect downstream IPoIB netdev from trying to access it in IB link.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement IPoIB RX SKB handler.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to have different RX handler per profile, fix and refactor the
current code to take the rx handler directly from the netdevice profile
rather than computing it on runtime as it was done with the switchdev
mode representor rx handler.

This will also remove the current wrong assumption in mlx5e_alloc_rq
code that mlx5e_priv->ppriv is of the type vport_rep.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement mlx5e's IPoIB SKB transmit using the helper functions provided
by mlx5e ethernet tx flow, the only difference in the code between
mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill
(UD datagram segment) in the TX descriptor (WQE) and it doesn't need to
have any vlan handling.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Break current mlx5e xmit flow into smaller blocks (helper functions)
in order to reuse them for IPoIB SKB transmission.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS
and TX HW context to perform on IPoIB traffic.

Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going
through this QP when the ULP IPoIB decides to cleanup.

Implement attach/detach mcast RDMA netdev callbacks for later RDMA
netdev use.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement open/close of IPoIB netdevice ndos using mlx5e's
channels API to manage data path resources (RQs/SQs/CQs).

Set IPoIB netdev address on dev_init ndo.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modify mlx5e tis creation function to accept underlay qp number, which
will be needed by IPoIB.

Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to
create one TIS with the IPoIB underlay qp, for IPoIB TX SQs.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering
tables, but IPoIB do not require MAC and VLAN steering tables so the
only tables we create in here are:
1. TTC Table (Traffic Type Classifier table for RSS steering)
2. ARFS Table (for accelerated RFS support)

Creation of those tables is identical to mlx5e ethernet mode, hence the
use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation,
All we do here is simply reuse the mlx5e implementation to create
direct and indirect (RSS) steering HW objects.

For that we just expose
mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h
and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile
callbacks.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c
file with empty implementation.

Downstream patches will provide the full mlx5 rdma netdevice acceleration
support for IPoIB into this new file, by using the mlx5e netdevice
profile and new mlx5_channels APIs and infrastructures.
Same as already done in mlx5e NIC netdevice and switchdev mode VF
representors.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for mlx5e RDMA net_device support, here we generalize
mlx5e_attach/detach in a way that those functions will be agnostic
to link type.  For that we move ethernet specific NIC net device logic out
of those functions into {nic,rep}_{enable/disable} mlx5e NIC and
representor profiles callbacks.

Also some of the logic was moved only to NIC profile since it is not right
to have this logic for representor net device (e.g. set port MTU).
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get the relevant capabilities if supports ipoib_enhanced_offloads and
init the flow steering table accordingly.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IB flow tables need the underlay qp to perform flow steering.
Here we change the API of the flow tables creation to accept the
underlay QP number as a parameter in order to support IB (IPoIB) flow
steering.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Azure hosts are not supporting non-TCP port numbers in vRSS hashing for
now. For example, UDP packet loss rate will be high if port numbers are
also included in vRSS hash.

So, we created this patch to use only IP numbers for hashing in non-TCP
traffic.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the outgoing skb has a RX queue mapping available, we use the queue
number directly, other than put it through Send Indirection Table.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>