Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 24 6月, 2019 2 次提交
    • F
      x86/umwait: Initialize umwait control values · bd688c69
      由 Fenghua Yu 提交于 
      umwait or tpause allows the processor to enter a light-weight
power/performance optimized state (C0.1 state) or an improved
power/performance optimized state (C0.2 state) for a period specified by
the instruction or until the system time limit or until a store to the
monitored address range in umwait.

IA32_UMWAIT_CONTROL MSR register allows the OS to enable/disable C0.2 on
the processor and to set the maximum time the processor can reside in C0.1
or C0.2.

By default C0.2 is enabled so the user wait instructions can enter the
C0.2 state to save more power with slower wakeup time.

Andy Lutomirski proposed to set the maximum umwait time to 100000 cycles by
default. A quote from Andy:

  "What I want to avoid is the case where it works dramatically differently
   on NO_HZ_FULL systems as compared to everything else. Also, UMWAIT may
   behave a bit differently if the max timeout is hit, and I'd like that
   path to get exercised widely by making it happen even on default
   configs."

A sysfs interface to adjust the time and the C0.2 enablement is provided in
a follow up change.

[ tglx: Renamed MSR_IA32_UMWAIT_CONTROL_MAX_TIME to
  	MSR_IA32_UMWAIT_CONTROL_TIME_MASK because the constant is used as
  	mask throughout the code.
	Massaged comments and changelog ]
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAshok Raj <ashok.raj@intel.com>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Link: https://lkml.kernel.org/r/1560994438-235698-3-git-send-email-fenghua.yu@intel.com
      bd688c69
    • F
      x86/cpufeatures: Enumerate user wait instructions · 6dbbf5ec
      由 Fenghua Yu 提交于 
      umonitor, umwait, and tpause are a set of user wait instructions.

umonitor arms address monitoring hardware using an address. The
address range is determined by using CPUID.0x5. A store to
an address within the specified address range triggers the
monitoring hardware to wake up the processor waiting in umwait.

umwait instructs the processor to enter an implementation-dependent
optimized state while monitoring a range of addresses. The optimized
state may be either a light-weight power/performance optimized state
(C0.1 state) or an improved power/performance optimized state
(C0.2 state).

tpause instructs the processor to enter an implementation-dependent
optimized state C0.1 or C0.2 state and wake up when time-stamp counter
reaches specified timeout.

The three instructions may be executed at any privilege level.

The instructions provide power saving method while waiting in
user space. Additionally, they can allow a sibling hyperthread to
make faster progress while this thread is waiting. One example of an
application usage of umwait is when waiting for input data from another
application, such as a user level multi-threaded packet processing
engine.

Availability of the user wait instructions is indicated by the presence
of the CPUID feature flag WAITPKG CPUID.0x07.0x0:ECX[5].

Detailed information on the instructions and CPUID feature WAITPKG flag
can be found in the latest Intel Architecture Instruction Set Extensions
and Future Features Programming Reference and Intel 64 and IA-32
Architectures Software Developer's Manual.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAshok Raj <ashok.raj@intel.com>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Link: https://lkml.kernel.org/r/1560994438-235698-2-git-send-email-fenghua.yu@intel.com
      6dbbf5ec
  3. 22 6月, 2019 6 次提交
  5. 20 6月, 2019 2 次提交
    • F
      x86/cpufeatures: Enumerate the new AVX512 BFLOAT16 instructions · b302e4b1
      由 Fenghua Yu 提交于 
      AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point
format (BF16) for deep learning optimization.

BF16 is a short version of 32-bit single-precision floating-point
format (FP32) and has several advantages over 16-bit half-precision
floating-point format (FP16). BF16 keeps FP32 accumulation after
multiplication without loss of precision, offers more than enough
range for deep learning training tasks, and doesn't need to handle
hardware exception.

AVX512 BFLOAT16 instructions are enumerated in CPUID.7.1:EAX[bit 5]
AVX512_BF16.

CPUID.7.1:EAX contains only feature bits. Reuse the currently empty
word 12 as a pure features word to hold the feature bits including
AVX512_BF16.

Detailed information of the CPUID bit and AVX512 BFLOAT16 instructions
can be found in the latest Intel Architecture Instruction Set Extensions
and Future Features Programming Reference.

 [ bp: Check CPUID(7) subleaf validity before accessing subleaf 1. ]
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-3-git-send-email-fenghua.yu@intel.com
      b302e4b1
    • F
      x86/cpufeatures: Combine word 11 and 12 into a new scattered features word · acec0ce0
      由 Fenghua Yu 提交于 
      It's a waste for the four X86_FEATURE_CQM_* feature bits to occupy two
whole feature bits words. To better utilize feature words, re-define
word 11 to host scattered features and move the four X86_FEATURE_CQM_*
features into Linux defined word 11. More scattered features can be
added in word 11 in the future.

Rename leaf 11 in cpuid_leafs to CPUID_LNX_4 to reflect it's a
Linux-defined leaf.

Rename leaf 12 as CPUID_DUMMY which will be replaced by a meaningful
name in the next patch when CPUID.7.1:EAX occupies world 12.

Maximum number of RMID and cache occupancy scale are retrieved from
CPUID.0xf.1 after scattered CQM features are enumerated. Carve out the
code into a separate function.

KVM doesn't support resctrl now. So it's safe to move the
X86_FEATURE_CQM_* features to scattered features word 11 for KVM.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Babu Moger <babu.moger@amd.com>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-2-git-send-email-fenghua.yu@intel.com
      acec0ce0
  7. 14 6月, 2019 2 次提交
    • A
      x86/cpufeatures: Add FDP_EXCPTN_ONLY and ZERO_FCS_FDS · cbb99c0f
      由 Aaron Lewis 提交于 
      Add the CPUID enumeration for Intel's de-feature bits to accommodate
passing these de-features through to kvm guests.

These de-features are (from SDM vol 1, section 8.1.8):
 - X86_FEATURE_FDP_EXCPTN_ONLY: If CPUID.(EAX=07H,ECX=0H):EBX[bit 6] = 1, the
   data pointer (FDP) is updated only for the x87 non-control instructions that
   incur unmasked x87 exceptions.
 - X86_FEATURE_ZERO_FCS_FDS: If CPUID.(EAX=07H,ECX=0H):EBX[bit 13] = 1, the
   processor deprecates FCS and FDS; it saves each as 0000H.
Signed-off-by: NAaron Lewis <aaronlewis@google.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NJim Mattson <jmattson@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: marcorr@google.com
Cc: Peter Feiner <pfeiner@google.com>
Cc: pshier@google.com
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190605220252.103406-1-aaronlewis@google.com
      cbb99c0f
    • R
      x86/cpu: Add Ice Lake NNPI to Intel family · e32d045c
      由 Rajneesh Bhardwaj 提交于 
      Add the CPUID model number of Ice Lake Neural Network Processor for Deep
Learning Inference (ICL-NNPI) to the Intel family list. Ice Lake NNPI uses
model number 0x9D and this will be documented in a future version of Intel
Software Development Manual.
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190606012419.13250-1-rajneesh.bhardwaj@linux.intel.com
      e32d045c
  9. 05 6月, 2019 6 次提交
  11. 31 5月, 2019 7 次提交
  13. 24 5月, 2019 2 次提交
  15. 21 5月, 2019 1 次提交
    • T
      treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 · 1ccea77e
      由 Thomas Gleixner 提交于 
      Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NJilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: NSteve Winslow <swinslow@gmail.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1ccea77e
  17. 15 5月, 2019 2 次提交
  19. 13 5月, 2019 1 次提交
  21. 11 5月, 2019 3 次提交
  23. 09 5月, 2019 2 次提交
    • D
      x86/mpx, mm/core: Fix recursive munmap() corruption · 5a28fc94
      由 Dave Hansen 提交于 
      This is a bit of a mess, to put it mildly.  But, it's a bug
that only seems to have showed up in 4.20 but wasn't noticed
until now, because nobody uses MPX.

MPX has the arch_unmap() hook inside of munmap() because MPX
uses bounds tables that protect other areas of memory.  When
memory is unmapped, there is also a need to unmap the MPX
bounds tables.  Barring this, unused bounds tables can eat 80%
of the address space.

But, the recursive do_munmap() that gets called vi arch_unmap()
wreaks havoc with __do_munmap()'s state.  It can result in
freeing populated page tables, accessing bogus VMA state,
double-freed VMAs and more.

See the "long story" further below for the gory details.

To fix this, call arch_unmap() before __do_unmap() has a chance
to do anything meaningful.  Also, remove the 'vma' argument
and force the MPX code to do its own, independent VMA lookup.

== UML / unicore32 impact ==

Remove unused 'vma' argument to arch_unmap().  No functional
change.

I compile tested this on UML but not unicore32.

== powerpc impact ==

powerpc uses arch_unmap() well to watch for munmap() on the
VDSO and zeroes out 'current->mm->context.vdso_base'.  Moving
arch_unmap() makes this happen earlier in __do_munmap().  But,
'vdso_base' seems to only be used in perf and in the signal
delivery that happens near the return to userspace.  I can not
find any likely impact to powerpc, other than the zeroing
happening a little earlier.

powerpc does not use the 'vma' argument and is unaffected by
its removal.

I compile-tested a 64-bit powerpc defconfig.

== x86 impact ==

For the common success case this is functionally identical to
what was there before.  For the munmap() failure case, it's
possible that some MPX tables will be zapped for memory that
continues to be in use.  But, this is an extraordinarily
unlikely scenario and the harm would be that MPX provides no
protection since the bounds table got reset (zeroed).

I can't imagine anyone doing this:

	ptr = mmap();
	// use ptr
	ret = munmap(ptr);
	if (ret)
		// oh, there was an error, I'll
		// keep using ptr.

Because if you're doing munmap(), you are *done* with the
memory.  There's probably no good data in there _anyway_.

This passes the original reproducer from Richard Biener as
well as the existing mpx selftests/.

The long story:

munmap() has a couple of pieces:

 1. Find the affected VMA(s)
 2. Split the start/end one(s) if neceesary
 3. Pull the VMAs out of the rbtree
 4. Actually zap the memory via unmap_region(), including
    freeing page tables (or queueing them to be freed).
 5. Fix up some of the accounting (like fput()) and actually
    free the VMA itself.

This specific ordering was actually introduced by:

  dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap")

during the 4.20 merge window.  The previous __do_munmap() code
was actually safe because the only thing after arch_unmap() was
remove_vma_list().  arch_unmap() could not see 'vma' in the
rbtree because it was detached, so it is not even capable of
doing operations unsafe for remove_vma_list()'s use of 'vma'.

Richard Biener reported a test that shows this in dmesg:

  [1216548.787498] BUG: Bad rss-counter state mm:0000000017ce560b idx:1 val:551
  [1216548.787500] BUG: non-zero pgtables_bytes on freeing mm: 24576

What triggered this was the recursive do_munmap() called via
arch_unmap().  It was freeing page tables that has not been
properly zapped.

But, the problem was bigger than this.  For one, arch_unmap()
can free VMAs.  But, the calling __do_munmap() has variables
that *point* to VMAs and obviously can't handle them just
getting freed while the pointer is still in use.

I tried a couple of things here.  First, I tried to fix the page
table freeing problem in isolation, but I then found the VMA
issue.  I also tried having the MPX code return a flag if it
modified the rbtree which would force __do_munmap() to re-walk
to restart.  That spiralled out of control in complexity pretty
fast.

Just moving arch_unmap() and accepting that the bonkers failure
case might eat some bounds tables seems like the simplest viable
fix.

This was also reported in the following kernel bugzilla entry:

  https://bugzilla.kernel.org/show_bug.cgi?id=203123

There are some reports that this commit triggered this bug:

  dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap")

While that commit certainly made the issues easier to hit, I believe
the fundamental issue has been with us as long as MPX itself, thus
the Fixes: tag below is for one of the original MPX commits.

[ mingo: Minor edits to the changelog and the patch. ]
Reported-by: NRichard Biener <rguenther@suse.de>
Reported-by: NH.J. Lu <hjl.tools@gmail.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-um@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: stable@vger.kernel.org
Fixes: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap")
Link: http://lkml.kernel.org/r/20190419194747.5E1AD6DC@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      5a28fc94
    • P
      x86_64: Allow breakpoints to emulate call instructions · 4b33dadf
      由 Peter Zijlstra 提交于 
      In order to allow breakpoints to emulate call instructions, they need to push
the return address onto the stack. The x86_64 int3 handler adds a small gap
to allow the stack to grow some. Use this gap to add the return address to
be able to emulate a call instruction at the breakpoint location.

These helper functions are added:

  int3_emulate_jmp(): changes the location of the regs->ip to return there.

 (The next two are only for x86_64)
  int3_emulate_push(): to push the address onto the gap in the stack
  int3_emulate_call(): push the return address and change regs->ip

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
[ Modified to only work for x86_64 and added comment to int3_emulate_push() ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      4b33dadf
  25. 08 5月, 2019 1 次提交
  27. 01 5月, 2019 3 次提交
    • K
      kvm, x86: Properly check whether a pfn is an MMIO or not · 0c55671f
      由 KarimAllah Ahmed 提交于 
      pfn_valid check is not sufficient because it only checks if a page has a struct
page or not, if "mem=" was passed to the kernel some valid pages won't have a
struct page. This means that if guests were assigned valid memory that lies
after the mem= boundary it will be passed uncached to the guest no matter what
the guest caching attributes are for this memory.

Introduce a new function e820__mapped_raw_any which is equivalent to
e820__mapped_any but uses the original e820 unmodified and use it to
identify real *RAM*.
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      0c55671f
    • B
      x86/kvm: Implement HWCR support · 191c8137
      由 Borislav Petkov 提交于 
      The hardware configuration register has some useful bits which can be
used by guests. Implement McStatusWrEn which can be used by guests when
injecting MCEs with the in-kernel mce-inject module.

For that, we need to set bit 18 - McStatusWrEn - first, before writing
the MCi_STATUS registers (otherwise we #GP).

Add the required machinery to do so.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: KVM <kvm@vger.kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      191c8137
    • S
      KVM: lapic: Refactor ->set_hv_timer to use an explicit expired param · f9927982
      由 Sean Christopherson 提交于 
      Refactor kvm_x86_ops->set_hv_timer to use an explicit parameter for
stating that the timer has expired.  Overloading the return value is
unnecessarily clever, e.g. can lead to confusion over the proper return
value from start_hv_timer() when r==1.

Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f9927982