1. 08 7月, 2014 7 次提交
  2. 19 6月, 2014 3 次提交
    • Y
      x86/efi: Support initrd loaded above 4G · 4bf7111f
      Yinghai Lu 提交于
      For boot efi kernel directly without bootloader.
      If the kernel support XLF_CAN_BE_LOADED_ABOVE_4G, we should
      not limit initrd under hdr->initrd_add_max.
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      4bf7111f
    • M
      x86/efi: Use early_memunmap() to squelch sparse errors · 98a716b6
      Matt Fleming 提交于
      The kbuild reports the following sparse errors,
      
      >> arch/x86/platform/efi/quirks.c:242:23: sparse: incorrect type in >> argument 1 (different address spaces)
         arch/x86/platform/efi/quirks.c:242:23:    expected void [noderef] <asn:2>*addr
         arch/x86/platform/efi/quirks.c:242:23:    got void *[assigned] tablep
      >> arch/x86/platform/efi/quirks.c:245:23: sparse: incorrect type in >> argument 1 (different address spaces)
         arch/x86/platform/efi/quirks.c:245:23:    expected void [noderef] <asn:2>*addr
         arch/x86/platform/efi/quirks.c:245:23:    got struct efi_setup_data *[assigned] data
      
      Dave Young had made previous attempts to convert the early_iounmap()
      calls to early_memunmap() but ran into merge conflicts with commit
      9e5c33d7 ("mm: create generic early_ioremap() support").
      
      Now that we've got that commit in place we can switch to using
      early_memunmap() since we're already using early_memremap() in
      efi_reuse_config().
      
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Saurabh Tangri <saurabh.tangri@intel.com>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      98a716b6
    • S
      x86/efi: Move all workarounds to a separate file quirks.c · eeb9db09
      Saurabh Tangri 提交于
      Currently, it's difficult to find all the workarounds that are
      applied when running on EFI, because they're littered throughout
      various code paths. This change moves all of them into a separate
      file with the hope that it will be come the single location for all
      our well documented quirks.
      Signed-off-by: NSaurabh Tangri <saurabh.tangri@intel.com>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      eeb9db09
  3. 16 6月, 2014 4 次提交
    • L
      Linux 3.16-rc1 · 7171511e
      Linus Torvalds 提交于
      7171511e
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · a9be2242
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
      
       1) Fix checksumming regressions, from Tom Herbert.
      
       2) Undo unintentional permissions changes for SCTP rto_alpha and
          rto_beta sysfs knobs, from Denial Borkmann.
      
       3) VXLAN, like other IP tunnels, should advertize it's encapsulation
          size using dev->needed_headroom instead of dev->hard_header_len.
          From Cong Wang.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        net: sctp: fix permissions for rto_alpha and rto_beta knobs
        vxlan: Checksum fixes
        net: add skb_pop_rcv_encapsulation
        udp: call __skb_checksum_complete when doing full checksum
        net: Fix save software checksum complete
        net: Fix GSO constants to match NETIF flags
        udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup
        vxlan: use dev->needed_headroom instead of dev->hard_header_len
        MAINTAINERS: update cxgb4 maintainer
      a9be2242
    • L
      Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux · dd1845af
      Linus Torvalds 提交于
      Pull more clock framework updates from Mike Turquette:
       "This contains the second half the of the clk changes for 3.16.
      
        They are simply fixes and code refactoring for the OMAP clock drivers.
        The sunxi clock driver changes include splitting out the one
        mega-driver into several smaller pieces and adding support for the A31
        SoC clocks"
      
      * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
        clk: sunxi: document PRCM clock compatible strings
        clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
        clk: sun6i: Protect SDRAM gating bit
        clk: sun6i: Protect CPU clock
        clk: sunxi: Rework clock protection code
        clk: sunxi: Move the GMAC clock to a file of its own
        clk: sunxi: Move the 24M oscillator to a file of its own
        clk: sunxi: Remove calls to clk_put
        clk: sunxi: document new A31 USB clock compatible
        clk: sunxi: Implement A31 USB clock
        ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies
        CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
        ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
        CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck
        CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)
        dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings
        ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock
        CLK: TI: gate: add composite interface clock to OMAP2 only build
        ARM: OMAP2: clock: add DT boot support for cpufreq_ck
        CLK: TI: OMAP2: add clock init support
        ...
      dd1845af
    • L
      Merge git://git.infradead.org/users/willy/linux-nvme · b55b3902
      Linus Torvalds 提交于
      Pull NVMe update from Matthew Wilcox:
       "Mostly bugfixes again for the NVMe driver.  I'd like to call out the
        exported tracepoint in the block layer; I believe Keith has cleared
        this with Jens.
      
        We've had a few reports from people who're really pounding on NVMe
        devices at scale, hence the timeout changes (and new module
        parameters), hotplug cpu deadlock, tracepoints, and minor performance
        tweaks"
      
      [ Jens hadn't seen that tracepoint thing, but is ok with it - it will
        end up going away when mq conversion happens ]
      
      * git://git.infradead.org/users/willy/linux-nvme: (22 commits)
        NVMe: Fix START_STOP_UNIT Scsi->NVMe translation.
        NVMe: Use Log Page constants in SCSI emulation
        NVMe: Define Log Page constants
        NVMe: Fix hot cpu notification dead lock
        NVMe: Rename io_timeout to nvme_io_timeout
        NVMe: Use last bytes of f/w rev SCSI Inquiry
        NVMe: Adhere to request queue block accounting enable/disable
        NVMe: Fix nvme get/put queue semantics
        NVMe: Delete NVME_GET_FEAT_TEMP_THRESH
        NVMe: Make admin timeout a module parameter
        NVMe: Make iod bio timeout a parameter
        NVMe: Prevent possible NULL pointer dereference
        NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD)
        NVMe: Update data structures for NVMe 1.2
        NVMe: Enable BUILD_BUG_ON checks
        NVMe: Update namespace and controller identify structures to the 1.1a spec
        NVMe: Flush with data support
        NVMe: Configure support for block flush
        NVMe: Add tracepoints
        NVMe: Protect against badly formatted CQEs
        ...
      b55b3902
  4. 15 6月, 2014 15 次提交
    • D
      net: sctp: fix permissions for rto_alpha and rto_beta knobs · b58537a1
      Daniel Borkmann 提交于
      Commit 3fd091e7 ("[SCTP]: Remove multiple levels of msecs
      to jiffies conversions.") has silently changed permissions for
      rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of
      this was to discourage users from tweaking rto_alpha and
      rto_beta knobs in production environments since they are key
      to correctly compute rtt/srtt.
      
      RFC4960 under section 6.3.1. RTO Calculation says regarding
      rto_alpha and rto_beta under rule C3 and C4:
      
        [...]
        C3)  When a new RTT measurement R' is made, set
      
             RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'|
      
             and
      
             SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R'
      
             Note: The value of SRTT used in the update to RTTVAR
             is its value before updating SRTT itself using the
             second assignment. After the computation, update
             RTO <- SRTT + 4 * RTTVAR.
      
        C4)  When data is in flight and when allowed by rule C5
             below, a new RTT measurement MUST be made each round
             trip. Furthermore, new RTT measurements SHOULD be
             made no more than once per round trip for a given
             destination transport address. There are two reasons
             for this recommendation: First, it appears that
             measuring more frequently often does not in practice
             yield any significant benefit [ALLMAN99]; second,
             if measurements are made more often, then the values
             of RTO.Alpha and RTO.Beta in rule C3 above should be
             adjusted so that SRTT and RTTVAR still adjust to
             changes at roughly the same rate (in terms of how many
             round trips it takes them to reflect new values) as
             they would if making only one measurement per
             round-trip and using RTO.Alpha and RTO.Beta as given
             in rule C3. However, the exact nature of these
             adjustments remains a research issue.
        [...]
      
      While it is discouraged to adjust rto_alpha and rto_beta
      and not further specified how to adjust them, the RFC also
      doesn't explicitly forbid it, but rather gives a RECOMMENDED
      default value (rto_alpha=3, rto_beta=2). We have a couple
      of users relying on the old permissions before they got
      changed. That said, if someone really has the urge to adjust
      them, we could allow it with a warning in the log.
      
      Fixes: 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.")
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Cc: Vlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b58537a1
    • D
      Merge branch 'csum_fixes' · e4f7ae93
      David S. Miller 提交于
      Tom Herbert says:
      
      ====================
      Fixes related to some recent checksum modifications.
      
      - Fix GSO constants to match NETIF flags
      - Fix logic in saving checksum complete in __skb_checksum_complete
      - Call __skb_checksum_complete from UDP if we are checksumming over
        whole packet in order to save checksum.
      - Fixes to VXLAN to work correctly with checksum complete
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e4f7ae93
    • T
      vxlan: Checksum fixes · f79b064c
      Tom Herbert 提交于
      Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet
      header to work properly with checksum complete.
      Signed-off-by: NTom Herbert <therbert@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f79b064c
    • T
      net: add skb_pop_rcv_encapsulation · e5eb4e30
      Tom Herbert 提交于
      This function is used by UDP encapsulation protocols in RX when
      crossing encapsulation boundary. If ip_summed is set to
      CHECKSUM_UNNECESSARY and encapsulation is not set, change to
      CHECKSUM_NONE since the checksum has not been validated within the
      encapsulation. Clears csum_valid by the same rationale.
      Signed-off-by: NTom Herbert <therbert@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e5eb4e30
    • T
      udp: call __skb_checksum_complete when doing full checksum · bbdff225
      Tom Herbert 提交于
      In __udp_lib_checksum_complete check if checksum is being done over all
      the data (len is equal to skb->len) and if it is call
      __skb_checksum_complete instead of __skb_checksum_complete_head. This
      allows checksum to be saved in checksum complete.
      Signed-off-by: NTom Herbert <therbert@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bbdff225
    • T
      net: Fix save software checksum complete · 46fb51eb
      Tom Herbert 提交于
      Geert reported issues regarding checksum complete and UDP.
      The logic introduced in commit 7e3cead5
      ("net: Save software checksum complete") is not correct.
      
      This patch:
      1) Restores code in __skb_checksum_complete_header except for setting
         CHECKSUM_UNNECESSARY. This function may be calculating checksum on
         something less than skb->len.
      2) Adds saving checksum to __skb_checksum_complete. The full packet
         checksum 0..skb->len is calculated without adding in pseudo header.
         This value is saved in skb->csum and then the pseudo header is added
         to that to derive the checksum for validation.
      3) In both __skb_checksum_complete_header and __skb_checksum_complete,
         set skb->csum_valid to whether checksum of zero was computed. This
         allows skb_csum_unnecessary to return true without changing to
         CHECKSUM_UNNECESSARY which was done previously.
      4) Copy new csum related bits in __copy_skb_header.
      Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: NTom Herbert <therbert@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      46fb51eb
    • T
      net: Fix GSO constants to match NETIF flags · 4b28252c
      Tom Herbert 提交于
      Joseph Gasparakis reported that VXLAN GSO offload stopped working with
      i40e device after recent UDP changes. The problem is that the
      SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This
      patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several
      GSO constants that were missing to avoid the problem in the future.
      Reported-by: NJoseph Gasparakis <joseph.gasparakis@intel.com>
      Signed-off-by: NTom Herbert <therbert@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4b28252c
    • L
      Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · abf04af7
      Linus Torvalds 提交于
      Pull more SCSI updates from James Bottomley:
       "This is just a couple of drivers (hpsa and lpfc) that got left out for
        further testing in linux-next.  We also have one fix to a prior
        submission (qla2xxx sparse)"
      
      * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
        qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch
        lpfc: Update lpfc version to driver version 10.2.8001.0
        lpfc: Fix ExpressLane priority setup
        lpfc: mark old devices as obsolete
        lpfc: Fix for initializing RRQ bitmap
        lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries
        lpfc: Update lpfc version to driver version 10.2.8000.0
        lpfc: Update Copyright on changed files from 8.3.45 patches
        lpfc: Update Copyright on changed files
        lpfc: Fixed locking for scsi task management commands
        lpfc: Convert runtime references to old xlane cfg param to fof cfg param
        lpfc: Fix FW dump using sysfs
        lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock
        lpfc: Fixed kernel panic in lpfc_abort_handler
        lpfc: Fix locking for postbufq when freeing
        lpfc: Fix locking for lpfc_hba_down_post
        lpfc: Fix dynamic transitions of FirstBurst from on to off
        hpsa: fix handling of hpsa_volume_offline return value
        hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id
        hpsa: remove messages about volume status VPD inquiry page not supported
        ...
      abf04af7
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs · 16d52ef7
      Linus Torvalds 提交于
      Pull more btrfs updates from Chris Mason:
       "This has a few fixes since our last pull and a new ioctl for doing
        btree searches from userland.  It's very similar to the existing
        ioctl, but lets us return larger items back down to the app"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
        btrfs: fix error handling in create_pending_snapshot
        btrfs: fix use of uninit "ret" in end_extent_writepage()
        btrfs: free ulist in qgroup_shared_accounting() error path
        Btrfs: fix qgroups sanity test crash or hang
        btrfs: prevent RCU warning when dereferencing radix tree slot
        Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting
        btrfs: new ioctl TREE_SEARCH_V2
        btrfs: tree_search, search_ioctl: direct copy to userspace
        btrfs: new function read_extent_buffer_to_user
        btrfs: tree_search, copy_to_sk: return needed size on EOVERFLOW
        btrfs: tree_search, copy_to_sk: return EOVERFLOW for too small buffer
        btrfs: tree_search, search_ioctl: accept varying buffer
        btrfs: tree_search: eliminate redundant nr_items check
      16d52ef7
    • L
      Merge git://git.kvack.org/~bcrl/aio-next · a311c480
      Linus Torvalds 提交于
      Pull aio fix and cleanups from Ben LaHaise:
       "This consists of a couple of code cleanups plus a minor bug fix"
      
      * git://git.kvack.org/~bcrl/aio-next:
        aio: cleanup: flatten kill_ioctx()
        aio: report error from io_destroy() when threads race in io_destroy()
        fs/aio.c: Remove ctx parameter in kiocb_cancel
      a311c480
    • A
      fix __swap_writepage() compile failure on old gcc versions · 05064084
      Al Viro 提交于
      Tetsuo Handa wrote:
       "Commit 62a8067a ("bio_vec-backed iov_iter") introduced an unnamed
        union inside a struct which gcc-4.4.7 cannot handle.  Name the unnamed
         union as u in order to fix build failure"
      
      Let's do this instead: there is only one place in the entire tree that
      steps into this breakage.  Anon structs and unions work in older gcc
      versions; as the matter of fact, we have those in the tree - see e.g.
      struct ieee80211_tx_info in include/net/mac80211.h
      
      What doesn't work is handling their initializers:
      
      struct {
      	int a;
      	union {
      		int b;
      		char c;
      	};
      } x[2] = {{.a = 1, .c = 'a'}, {.a = 0, .b = 1}};
      
      is the obvious syntax for initializer, perfectly fine for C11 and
      handled correctly by gcc-4.7 or later.
      
      Earlier versions, though, break on it - declaration is fine and so's
      access to fields (i.e.  x[0].c = 'a'; would produce the right code), but
      members of the anon structs and unions are not inserted into the right
      namespace.  Tellingly, those older versions will not barf on struct {int
      a; struct {int a;};}; - looks like they just have it hacked up somewhere
      around the handling of .  and -> instead of doing the right thing.
      
      The easiest way to deal with that crap is to turn initialization of
      those fields (in the only place where we have such initializer of
      iov_iter) into plain assignment.
      Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
      Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      05064084
    • L
      Merge tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi · 4a54e5e5
      Linus Torvalds 提交于
      Pull HSI build fixes from Sebastian Reichel:
       - tighten dependency between ssi-protocol and omap-ssi to fix build
         failures with randconfig.
       - use normal module refcounting in omap driver to fix build with
         disabled module support
      
      * tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
        hsi: omap_ssi_port: use normal module refcounting
        HSI: fix omap ssi driver dependency
      4a54e5e5
    • L
      Merge tag 'gpio-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · 1ad96bb0
      Linus Torvalds 提交于
      Pull GPIO fix from Linus Walleij:
       "A first GPIO fix for the v3.16 series, this was serious since it
        blocks the OMAP boot.
      
        Sending you this vital fix before leaving for a short vacation so it
        does not sit collecting dust in my tree for no good reason.
      
        Apart from this, our v3.16 cycle looks like a good start"
      
      * tag 'gpio-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: of: Fix handling for deferred probe for -gpio suffix
      1ad96bb0
    • L
      Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · c728762e
      Linus Torvalds 提交于
      Pull x86 vdso fixes from Peter Anvin:
       "Fixes for x86/vdso.
      
        One is a simple build fix for bigendian hosts, one is to make "make
        vdso_install" work again, and the rest is about working around a bug
        in Google's Go language -- two are documentation patches that improves
        the sample code that the Go coders took, modified, and broke; the
        other two implements a workaround that keeps existing Go binaries from
        segfaulting at least"
      
      * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/vdso: Fix vdso_install
        x86/vdso: Hack to keep 64-bit Go programs working
        x86/vdso: Add PUT_LE to store little-endian values
        x86/vdso/doc: Make vDSO examples more portable
        x86/vdso/doc: Rename vdso_test.c to vdso_standalone_test_x86.c
        x86, vdso: Remove one final use of htole16()
      c728762e
    • L
      Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging · 503698e1
      Linus Torvalds 提交于
      Pull hwmon updates from Guenter Roeck:
       - new driver for Sensirion SHTC1 humidity / temperature sensor
       - convert ltc4151 and vexpress drivers to use devm functions
       - drop generic chip detection from lm85 driver
       - avoid forward declarations in atxp1 driver
       - fix sign extensions in ina2xx driver
      
      * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
        hwmon: vexpress: Use devm helper for hwmon device registration
        hwmon: (atxp1) Avoid forward declaration
        hwmon: add support for Sensirion SHTC1 sensor
        hwmon: (ltc4151) Convert to devm_hwmon_device_register_with_groups
        hwmon: (lm85) Drop generic detection
        hwmon: (ina2xx) Cast to s16 on shunt and current regs
      503698e1
  5. 14 6月, 2014 11 次提交
    • E
      udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup · 63c6f81c
      Eric Dumazet 提交于
      Its too easy to add thousand of UDP sockets on a particular bucket,
      and slow down an innocent multicast receiver.
      
      Early demux is supposed to be an optimization, we should avoid spending
      too much time in it.
      
      It is interesting to note __udp4_lib_demux_lookup() only tries to
      match first socket in the chain.
      
      10 is the threshold we already have in __udp4_lib_lookup() to switch
      to secondary hash.
      
      Fixes: 421b3885 ("udp: ipv4: Add udp early demux")
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Reported-by: NDavid Held <drheld@google.com>
      Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      63c6f81c
    • C
      vxlan: use dev->needed_headroom instead of dev->hard_header_len · 2853af6a
      Cong Wang 提交于
      When we mirror packets from a vxlan tunnel to other device,
      the mirror device should see the same packets (that is, without
      outer header). Because vxlan tunnel sets dev->hard_header_len,
      tcf_mirred() resets mac header back to outer mac, the mirror device
      actually sees packets with outer headers
      
      Vxlan tunnel should set dev->needed_headroom instead of
      dev->hard_header_len, like what other ip tunnels do. This fixes
      the above problem.
      
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: stephen hemminger <stephen@networkplumber.org>
      Cc: Pravin B Shelar <pshelar@nicira.com>
      Signed-off-by: NCong Wang <cwang@twopensource.com>
      Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2853af6a
    • D
      MAINTAINERS: update cxgb4 maintainer · 56f16c74
      Dimitris Michailidis 提交于
      Hari's been doing the patch submissions for a while now and he'll be
      taking over as maintainer.
      Signed-off-by: NDimitris Michailidis <dm@chelsio.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      56f16c74
    • A
      x86/vdso: Fix vdso_install · a934fb5b
      Andy Lutomirski 提交于
      "make vdso_install" installs unstripped versions of the vdso objects
      for the benefit of the debugger.  This was broken by checkin:
      
      6f121e54 x86, vdso: Reimplement vdso.so preparation in build-time C
      
      The filenames are different now, so update the Makefile to cope.
      
      This still installs the 64-bit vdso as vdso64.so.  We believe this
      will be okay, as the only known user is a patched gdb which is known
      to use build-ids, but if it turns out to be a problem we may have to
      add a link.
      
      Inspired by a patch from Sam Ravnborg.
      Acked-by: NSam Ravnborg <sam@ravnborg.org>
      Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
      Tested-by: NJosh Boyer <jwboyer@fedoraproject.org>
      Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
      Link: http://lkml.kernel.org/r/b10299edd8ba98d17e07dafcd895b8ecf4d99eff.1402586707.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
      a934fb5b
    • D
      NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. · b8e08084
      Dan McLeran 提交于
      This patch contains several fixes for Scsi START_STOP_UNIT. The previous
      code did not account for signed vs. unsigned arithmetic which resulted
      in an invalid lowest power state caculation when the device only supports
      1 power state.
      
      The code for Power Condition == 2 (Idle) was not following the spec. The
      spec calls for setting the device to specific power states, depending
      upon Power Condition Modifier, without accounting for the number of
      power states supported by the device.
      
      The code for Power Condition == 3 (Standby) was using a hard-coded '0'
      which is replaced with the macro POWER_STATE_0.
      Signed-off-by: NDan McLeran <daniel.mcleran@intel.com>
      Reviewed-by: NVishal Verma <vishal.l.verma@linux.intel.com>
      Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
      b8e08084
    • E
      btrfs: fix error handling in create_pending_snapshot · 47a306a7
      Eric Sandeen 提交于
      fcebe456 cut and pasted some code to a later point
      in create_pending_snapshot(), but didn't switch
      to the appropriate error handling for this stage
      of the function.
      Signed-off-by: NEric Sandeen <sandeen@redhat.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      47a306a7
    • E
      btrfs: fix use of uninit "ret" in end_extent_writepage() · 3e2426bd
      Eric Sandeen 提交于
      If this condition in end_extent_writepage() is false:
      
      	if (tree->ops && tree->ops->writepage_end_io_hook)
      
      we will then test an uninitialized "ret" at:
      
      	ret = ret < 0 ? ret : -EIO;
      
      The test for ret is for the case where ->writepage_end_io_hook
      failed, and we'd choose that ret as the error; but if
      there is no ->writepage_end_io_hook, nothing sets ret.
      
      Initializing ret to 0 should be sufficient; if
      writepage_end_io_hook wasn't set, (!uptodate) means
      non-zero err was passed in, so we choose -EIO in that case.
      Signed-of-by: NEric Sandeen <sandeen@redhat.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      3e2426bd
    • E
      btrfs: free ulist in qgroup_shared_accounting() error path · d7372780
      Eric Sandeen 提交于
      If tmp = ulist_alloc(GFP_NOFS) fails, we return without
      freeing the previously allocated qgroups = ulist_alloc(GFP_NOFS)
      and cause a memory leak.
      Signed-off-by: NEric Sandeen <sandeen@redhat.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      d7372780
    • F
      Btrfs: fix qgroups sanity test crash or hang · b050f9f6
      Filipe Manana 提交于
      Often when running the qgroups sanity test, a crash or a hang happened.
      This is because the extent buffer the test uses for the root node doesn't
      have an header level explicitly set, making it have a random level value.
      This is a problem when it's not zero for the btrfs_search_slot() calls
      the test ends up doing, resulting in crashes or hangs such as the following:
      
      [ 6454.127192] Btrfs loaded, debug=on, assert=on, integrity-checker=on
      (...)
      [ 6454.127760] BTRFS: selftest: Running qgroup tests
      [ 6454.127964] BTRFS: selftest: Running test_test_no_shared_qgroup
      [ 6454.127966] BTRFS: selftest: Qgroup basic add
      [ 6480.152005] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:5383]
      [ 6480.152005] Modules linked in: btrfs(+) xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc i2c_piix4 i2c_core pcspkr evbug psmouse serio_raw e1000 [last unloaded: btrfs]
      [ 6480.152005] irq event stamp: 188448
      [ 6480.152005] hardirqs last  enabled at (188447): [<ffffffff8168ef5c>] restore_args+0x0/0x30
      [ 6480.152005] hardirqs last disabled at (188448): [<ffffffff81698e6a>] apic_timer_interrupt+0x6a/0x80
      [ 6480.152005] softirqs last  enabled at (188446): [<ffffffff810516cf>] __do_softirq+0x1cf/0x450
      [ 6480.152005] softirqs last disabled at (188441): [<ffffffff81051c25>] irq_exit+0xb5/0xc0
      [ 6480.152005] CPU: 0 PID: 5383 Comm: modprobe Not tainted 3.15.0-rc8-fdm-btrfs-next-33+ #4
      [ 6480.152005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      [ 6480.152005] task: ffff8802146125a0 ti: ffff8800d0d00000 task.ti: ffff8800d0d00000
      [ 6480.152005] RIP: 0010:[<ffffffff81349a63>]  [<ffffffff81349a63>] __write_lock_failed+0x13/0x20
      [ 6480.152005] RSP: 0018:ffff8800d0d038e8  EFLAGS: 00000287
      [ 6480.152005] RAX: 0000000000000000 RBX: ffffffff8168ef5c RCX: 000005deb8525852
      [ 6480.152005] RDX: 0000000000000000 RSI: 0000000000001d45 RDI: ffff8802105000b8
      [ 6480.152005] RBP: ffff8800d0d038e8 R08: fffffe12710f63db R09: ffffffffa03196fb
      [ 6480.152005] R10: ffff8802146125a0 R11: ffff880214612e28 R12: ffff8800d0d03858
      [ 6480.152005] R13: 0000000000000000 R14: ffff8800d0d00000 R15: ffff8802146125a0
      [ 6480.152005] FS:  00007f14ff804700(0000) GS:ffff880215e00000(0000) knlGS:0000000000000000
      [ 6480.152005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [ 6480.152005] CR2: 00007fff4df0dac8 CR3: 00000000d1796000 CR4: 00000000000006f0
      [ 6480.152005] Stack:
      [ 6480.152005]  ffff8800d0d03908 ffffffff810ae967 0000000000000001 ffff8802105000b8
      [ 6480.152005]  ffff8800d0d03938 ffffffff8168e57e ffffffffa0319c16 0000000000000007
      [ 6480.152005]  ffff880210500000 ffff880210500100 ffff8800d0d039b8 ffffffffa0319c16
      [ 6480.152005] Call Trace:
      [ 6480.152005]  [<ffffffff810ae967>] do_raw_write_lock+0x47/0xa0
      [ 6480.152005]  [<ffffffff8168e57e>] _raw_write_lock+0x5e/0x80
      [ 6480.152005]  [<ffffffffa0319c16>] ? btrfs_tree_lock+0x116/0x270 [btrfs]
      [ 6480.152005]  [<ffffffffa0319c16>] btrfs_tree_lock+0x116/0x270 [btrfs]
      [ 6480.152005]  [<ffffffffa02b2acb>] btrfs_lock_root_node+0x3b/0x50 [btrfs]
      [ 6480.152005]  [<ffffffffa02b81a6>] btrfs_search_slot+0x916/0xa20 [btrfs]
      [ 6480.152005]  [<ffffffff811a727f>] ? create_object+0x23f/0x300
      [ 6480.152005]  [<ffffffffa02b9958>] btrfs_insert_empty_items+0x78/0xd0 [btrfs]
      [ 6480.152005]  [<ffffffffa036041a>] insert_normal_tree_ref.constprop.4+0xa2/0x19a [btrfs]
      [ 6480.152005]  [<ffffffffa03605c3>] test_no_shared_qgroup+0xb1/0x1ca [btrfs]
      [ 6480.152005]  [<ffffffff8108cad6>] ? local_clock+0x16/0x30
      [ 6480.152005]  [<ffffffffa035ef8e>] btrfs_test_qgroups+0x1ae/0x1d7 [btrfs]
      [ 6480.152005]  [<ffffffffa03a69d2>] ? ftrace_define_fields_btrfs_space_reservation+0xfd/0xfd [btrfs]
      [ 6480.152005]  [<ffffffffa03a6a86>] init_btrfs_fs+0xb4/0x153 [btrfs]
      [ 6480.152005]  [<ffffffff81000352>] do_one_initcall+0x102/0x150
      [ 6480.152005]  [<ffffffff8103d223>] ? set_memory_nx+0x43/0x50
      [ 6480.152005]  [<ffffffff81682668>] ? set_section_ro_nx+0x6d/0x74
      [ 6480.152005]  [<ffffffff810d91cc>] load_module+0x1cdc/0x2630
      (...)
      
      Therefore initialize the extent buffer as an empty leaf (level 0).
      
      Issue easy to reproduce when btrfs is built as a module via:
      
          $ for ((i = 1; i <= 1000000; i++)); do rmmod btrfs; modprobe btrfs; done
      Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      b050f9f6
    • S
      btrfs: prevent RCU warning when dereferencing radix tree slot · f1e3c289
      Sasha Levin 提交于
      Mark the dereference as protected by lock. Not doing so triggers
      an RCU warning since the radix tree assumed that RCU is in use.
      Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      f1e3c289
    • W
      Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting · 5fbc7c59
      Wang Shilong 提交于
      Steps to reproduce:
      
       # mkfs.btrfs -f /dev/sd[b-f] -m raid5 -d raid5
       # mkfs.ext4 /dev/sdc --->corrupt one of btrfs device
       # mount /dev/sdb /mnt -o degraded
       # btrfs scrub start -BRd /mnt
      
      This is because readahead would skip missing device, this is not true
      for RAID5/6, because REQ_GET_READ_MIRRORS return 1 for RAID5/6 block
      mapping. If expected data locates in missing device, readahead thread
      would not call __readahead_hook() which makes event @rc->elems=0
      wait forever.
      
      Fix this problem by checking return value of btrfs_map_block(),we
      can only skip missing device safely if there are several mirrors.
      Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Signed-off-by: NChris Mason <clm@fb.com>
      5fbc7c59