- 09 5月, 2009 6 次提交
-
-
由 H. Peter Anvin 提交于
Use the BP_scratch symbol from asm-offsets.h instead of hard-coding the location. [ Impact: cleanup ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
When generating the compression suffix in arch/x86/boot/compressed/Makefile, follow standard Kbuild conventions, that is: - Use a dash not underscore before y/m/n endings - Use := whenever possible. Requested-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Simplify the arch/x86/boot/compressed/Makefile, by using the new capability of specifying multiple inputs to a compressor, and the CONFIG_X86_NEED_RELOCS Kconfig symbol. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Acked-by: NSam Ravnborg <sam@ravnborg.org>
-
由 H. Peter Anvin 提交于
We only need to build relocations when we are building a 32-bit relocatable kernel. Rather than unnecessarily complicating the Makefiles, make an explicit Kbuild symbol for this. [ Impact: permits future cleanup ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Sam Ravnborg <sam@ravnborg.org>
-
由 H. Peter Anvin 提交于
Allow the compression commands in Kbuild (i.e. gzip, bzip2, lzma) to take multiple input files and emit the concatenated compressed output. This avoids an intermediate step when a kernel image is built from multiple components, such as the relocatable x86-32 kernel. Sam Ravnborg integrated the bin_size script into the Makefile. [ Impact: new build feature, not yet used ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Acked-by: NSam Ravnborg <sam@ravnborg.org>
-
由 H. Peter Anvin 提交于
Aligning the .bss section makes it trivial to use large operation sizes for moving the initialized sections and clearing the .bss. The alignment chosen (L1 cache) is somewhat arbitrary, but should be large enough to avoid all known performance traps and small enough to not cause troubles. [ Impact: trivial performance enhancement, future patch prep ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 30 4月, 2009 1 次提交
-
-
由 Sam Ravnborg 提交于
Jesper reported that he saw following build issue: > ld:arch/x86/boot/compressed/vmlinux.lds:9: syntax error > make[2]: *** [arch/x86/boot/compressed/vmlinux] Error 1 > make[1]: *** [arch/x86/boot/compressed/vmlinux] Error 2 > make: *** [bzImage] Error 2 CPP defines the symbol "i386" to "1". Undefine this to fix it. [ Impact: build fix with certain tool chains ] Reported-by: NJesper Dangaard Brouer <jdb@comx.dk> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <alpine.LFD.2.00.0904260958190.3101@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 4月, 2009 15 次提交
-
-
由 Ingo Molnar 提交于
__init_begin/_end symbols should be inside sections as well, otherwise the relocatable kernel gets confused when freeing init sections in the wrong place. [ Impact: fix bootup crash ] Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090429105056.GA28720@uranus.ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Acked-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-2-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
32 bit: - explicit page align .bss - move ALING() out of .brk output section - discard *(.eh_frame) 64 bit: - move ALIGN() out of .bss output section - move ALIGN() out of .brk output section - use a dedicated section to define _end [ Impact: unify and fix section alignments in linker script ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-13-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
32 bit: - move __init_end outside the .bss output section It really did not belong in there [ Impact: 64-bit: cleanup, 32-bit: refactor linker script ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-12-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
[ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-11-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
32 bit: - increase alignment from 4 to 8 for .parainstructions - increase alignment from 4 to 8 for .altinstructions 64 bit: - move ALIGN() outside output section for .altinstructions None of the above should result in any functional change. [ Impact: refactor and unify linker script ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-10-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
32-bit: - Move definition of __init_begin outside output_section because it covers more than one section - Move ALIGN() for end-of-section inside .smp_locks output section. Same effect but the intent is better documented that we need both start and end aligned. 64-bit: - Move ALIGN() outside output section in .init.setup - Deleted unused __smp_alt_* symbols None of the above should result in any functional change. [ Impact: refactor and unify linker script ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-9-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
[ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-8-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
For 64 bit the following functional changes are introduced: - .data.page_aligned has moved - .data.cacheline_aligned has moved - .data.read_mostly has moved - ALIGN() moved out of output section for .data.cacheline_aligned - ALIGN() moved out of output section for .data.page_aligned Notice that 32 bit and 64 bit has different location of _edata. .data_nosave is 32 bit only as 64 bit is special due to PERCPU. [ Impact: 32-bit: cleanup, 64-bit: use 32-bit linker script ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-7-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
[ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-6-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
32 bit x86 had a dedicated .text.head output section, whereas 64 bit had it all in a single output section. In the unified version the dedicated .text.head output section was kept to have full control over the head code. 32 bit: - Moved definition of _stext to the linker script. The definition is located _after_ .text.page_aligned as this is what 32 bit did before. The ALIGN(8) was introduced so we hit the exact same address (on the tested config) before and after the move. I assume that it is a bug that _stext did not cover the .text.page_aligned section - if this is true it can be fixed in a follow-up patch (and the ugly ALIGN() can be dropped). [ Impact: 64-bit: cleanup, 32-bit: use the 64-bit linker script ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-5-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
[ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-4-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
PHDRS are not equal for the two - so use ifdefs to cover up for that. On the assumption that they may become equal the ifdef is inside the PHDRS definiton. [ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-3-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Merge everything except PHDRS and SECTIONS into vmlinux.lds.S. [ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-2-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Beautify vmlinux_32.lds.S: - Use tabs for indent - Located curly braces like in C code - Rearranged a few comments To see actual differences use "git diff -b" which ignore 'whitespace' changes. The beautification is done to prepare a unification of the _32 and _64 variants of the linker scripts. [ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1240991249-27117-1-git-send-email-sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 4月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
Look at the: diff -u arch/x86/boot/compressed/vmlinux_*.lds output and realize that they're basially exactly the same except for trivial naming differences, and the fact that the 64-bit version has a "pgtable" thing. So unify them. There's some trivial cleanup there (make the output format a Kconfig thing rather than doing #ifdef's for it, and unify both 32-bit and 64-bit BSS end to "_ebss", where 32-bit used to use the traditional "_end"), but other than that it's really very mindless and straigt conversion. For example, I think we should aim to remove "startup_32" vs "startup_64", and just call it "startup", and get rid of one more difference. I didn't do that. Also, notice the comment in the unified vmlinux.lds.S talks about "head_64" and "startup_32" which is an odd and incorrect mix, but that was actually what the old 64-bit only lds file had, so the confusion isn't new, and now that mixing is arguably more accurate thanks to the vmlinux.lds.S file being shared between the two cases ;) [ Impact: cleanup, unification ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Beautify vmlinux_64.lds.S: - Use tabs for indent - Located curly braces like in C code - Rearranged a few comments There is no functional changes in this patch The beautification is done to prepare a unification of the _32 and the _64 variants of the linker scripts. [ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090426210742.GA3464@uranus.ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 4月, 2009 1 次提交
-
-
由 Sam Ravnborg 提交于
Introducing this Kbuild file allow us to: make arch/x86/ And thus building all the core part of x86. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 4月, 2009 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix the cmd cache keys for amp verbs ALSA: add missing definitions(letters) to HD-Audio.txt ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883 [ALSA] intel8x0: add one retry to the ac97_clock measurement routine [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine ALSA: hda - Avoid call of snd_jack_report at release ALSA: add private_data to struct snd_jack ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes ALSA: snd-usb-caiaq: clean up header includes ALSA: sound/pci: use memdup_user() ALSA: sound/usb: use memdup_user() ALSA: sound/isa: use memdup_user() ALSA: sound/core: use memdup_user() [ALSA] intel8x0: do not use zero value from PICB register [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies [ALSA] hda_intel: fix unexpected ring buffer positions ASoC: Disable S3C64xx support in Kconfig ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Use DEFINE_SPINLOCK GFS2: cleanup file_operations mess GFS2: Move umount flush rwsem GFS2: Fix symlink creation race GFS2: Make quotad's waiting interruptible
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (28 commits) cfq-iosched: add close cooperator code cfq-iosched: log responsible 'cfqq' in idle timer arm cfq-iosched: tweak kick logic a bit more cfq-iosched: no need to save interrupts in cfq_kick_queue() brd: fix cacheflushing brd: support barriers swap: Remove code handling bio_alloc failure with __GFP_WAIT gfs2: Remove code handling bio_alloc failure with __GFP_WAIT ext4: Remove code handling bio_alloc failure with __GFP_WAIT dio: Remove code handling bio_alloc failure with __GFP_WAIT block: Remove code handling bio_alloc failure with __GFP_WAIT bio: add documentation to bio_alloc() splice: add helpers for locking pipe inode splice: remove generic_file_splice_write_nolock() ocfs2: fix i_mutex locking in ocfs2_splice_to_file() splice: fix i_mutex locking in generic_splice_write() splice: remove i_mutex locking in splice_from_pipe() splice: split up __splice_from_pipe() block: fix SG_IO to return a proper error value cfq-iosched: don't delay queue kick for a merged request ...
-
- 15 4月, 2009 12 次提交
-
-
由 Takashi Iwai 提交于
* topic/hda: ALSA: hda - Fix the cmd cache keys for amp verbs ALSA: add missing definitions(letters) to HD-Audio.txt
-
由 Takashi Iwai 提交于
Fix the key value generation for get/set amp verbs. The upper bits of the parameter have to be combined with the verb value to be unique for each direction/index of amp access. This fixes the resume problem on some hardwares like Macbook after the channel mode is changed. Tested-by: NJohannes Berg <johannes@sipsolutions.net> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: pseries/dtl.c should include asm/firmware.h powerpc: Fix data-corrupting bug in __futex_atomic_op powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset() powerpc: Allow 256kB pages with SHMEM powerpc: Document new FSL I2C bindings and cleanup powerpc/mm: Fix compile warning powerpc/85xx: TQM8548: update defconfig powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3 powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes powerpc: Add support for early tlbilx opcode powerpc: Fix tlbilx opcode
-
由 Linus Torvalds 提交于
It turns out that 'smp_call_function_many()' doesn't work at all like 'smp_call_function_single()', and my change to Andrew's patch to use it rather than a loop over all CPU's acpi-cpufreq doesn't work. My bad. 'smp_call_function_many()' has two "features" (aka "documented bugs"): (a) it needs to be called with preemption disabled, because it uses smp_processor_id() without guarding the CPU lookup with 'get_cpu()' and 'put_cpu()' like the 'single' variant does. (b) even if the current CPU is part of the CPU mask, it won't do the call on that CPU. Still, we're better off trying to use 'smp_call_function_many()' than looping over CPU's, since it at least in theory allows us to use a broadcast IPI and do it all in parallel. So let's just work around the silly semantic bugs in that function. Reported-and-tested-by: NAli Gholami Rudi <ali@rudi.ir> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jens Axboe 提交于
If we have processes that are working in close proximity to each other on disk, we don't want to idle wait. Instead allow the close process to issue a request, getting better aggregate bandwidth. The anticipatory scheduler has similar checks, noop and deadline do not need it since they don't care about process <-> io mappings. The code for CFQ is a little more involved though, since we split request queues into per-process contexts. This fixes a performance problem with eg dump(8), since it uses several processes in some silly attempt to speed IO up. Even if dump(8) isn't really a valid case (it should be fixed by using CLONE_IO), there are other cases where we see close processes and where idling ends up hurting performance. Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the initial implementation. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Makes it easier to read the traces. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We only kick the dispatch for an idling queue, if we think it's a (somewhat) fully merged request. Also allow a kick if we have other busy queues in the system, since we don't want to risk waiting for a potential merge in that case. It's better to get some work done and proceed. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
It's called from the workqueue handlers from process context, so we always have irqs enabled when entered. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nick Piggin 提交于
brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the pagecache's responsibility to flush user virtual aliases (the driver of course should flush kernel virtual mappings)... but anyway, there already exists cache flushing for one direction of transfer, so we should add the other. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nick Piggin 提交于
brd is always ordered (not that it matters, as it is defined not to survive when the system goes down). So tell the block layer it is ordered, which might be of help with testing filesystems. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. GFP_NOFS implies __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-