Some function prototypes and body for Thermal Assist Units were not in
sync. Update the function definition to match the existing function
declaration found in `setup-common.c`, changing an `int` return type to a
`u32` return type. Move the prototypes to a header file. Fix the following
warnings, treated as error with W=1:

  arch/powerpc/kernel/tau_6xx.c:257:5: error: no previous prototype for ‘cpu_temp_both’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:262:5: error: no previous prototype for ‘cpu_temp’ [-Werror=missing-prototypes]
  arch/powerpc/kernel/tau_6xx.c:267:5: error: no previous prototype for ‘tau_interrupts’ [-Werror=missing-prototypes]

Compile tested with CONFIG_TAU_INT.
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add one missing prototype for function rh_dump_blk. Fix warning treated as
error in W=1:

  arch/powerpc/lib/rheap.c:740:6: error: no previous prototype for ‘rh_dump_blk’ [-Werror=missing-prototypes]
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The function prototypes were declared within a `#ifdef CONFIG_PPC_LITE5200`
block which would prevent them from being visible when compiling
`mpc52xx_pm.c`. Move the prototypes outside of the `#ifdef` block to fix
the following warnings treated as errors with W=1:

  arch/powerpc/platforms/52xx/mpc52xx_pm.c:58:5: error: no previous prototype for ‘mpc52xx_pm_prepare’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/52xx/mpc52xx_pm.c:113:5: error: no previous prototype for ‘mpc52xx_pm_enter’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/52xx/mpc52xx_pm.c:181:6: error: no previous prototype for ‘mpc52xx_pm_finish’ [-Werror=missing-prototypes]
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a missing prototype for function `note_bootable_part` to silence a
warning treated as error with W=1:

  arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes]
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pmac_pfunc_base_install prototype was declared in powermac/smp.c since
function was used there, move it to pmac_pfunc.h header to be visible in
pfunc_base.c. Fix a warning treated as error with W=1:

  arch/powerpc/platforms/powermac/pfunc_base.c:330:12: error: no previous prototype for ‘pmac_pfunc_base_install’ [-Werror=missing-prototypes]
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/pci.c:34:5: error: no previous prototype for ‘gg2_read_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:61:5: error: no previous prototype for ‘gg2_write_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:97:5: error: no previous prototype for ‘rtas_read_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:112:5: error: no previous prototype for ‘rtas_write_config’ [-Werror=missing-prototypes]
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since the value of x is never intended to be read, declare it with gcc
attribute as unused. Fix warning treated as error with W=1:

  arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable]
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Remove variable declaration idu_size and associated code since not used.

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/setup.c:97:6: error: no previous prototype for ‘chrp_show_cpuinfo’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:302:13: error: no previous prototype for ‘chrp_setup_arch’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:385:16: error: variable ‘idu_size’ set but not used [-Werror=unused-but-set-variable]
  arch/powerpc/platforms/chrp/setup.c:526:13: error: no previous prototype for ‘chrp_init_IRQ’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:559:1: error: no previous prototype for ‘chrp_init2’ [-Werror=missing-prototypes]
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The function hlwd_pic_init can be made static, so do it. Fix the following
warning treated as error (W=1):

../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:158:20: error: no previous prototype for ‘hlwd_pic_init’ [-Werror=missing-prototypes]
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit 7a22d632 ("powerpc/mm/radix: Update command line parsing for
disable_radix") an `if` statement was added for a possible empty body
(prom_debug).

Fix the following warning, treated as error with W=1:

  arch/powerpc/kernel/prom_init.c:656:46: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body]
Suggested-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Trivial fix to remove the following sparse warnings:

  arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer
  arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer

Also use `--fix` command line option from `script/checkpatch --strict` to
remove the following:

  CHECK: Comparison to NULL could be written "!dispDeviceBase"
  #72: FILE: arch/powerpc/kernel/btext.c:160:
  +	if (dispDeviceBase == NULL)

  CHECK: Comparison to NULL could be written "!vbase"
  #80: FILE: arch/powerpc/kernel/btext.c:167:
  +	if (vbase == NULL)

  CHECK: Comparison to NULL could be written "!base"
  #89: FILE: arch/powerpc/kernel/btext.c:274:
  +	if (base == NULL)

  CHECK: Comparison to NULL could be written "!dispDeviceBase"
  #98: FILE: arch/powerpc/kernel/btext.c:285:
  +	if (dispDeviceBase == NULL)

  CHECK: Comparison to NULL could be written "strstr"
  #117: FILE: arch/powerpc/kernel/module_32.c:117:
  +		if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL)

  CHECK: Comparison to NULL could be written "!Hash"
  #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170:
  +	if (Hash == NULL)

  CHECK: Comparison to NULL could be written "Hash"
  #143: FILE: arch/powerpc/mm/tlb_hash32.c:44:
  +	if (Hash != NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #152: FILE: arch/powerpc/mm/tlb_hash32.c:57:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #161: FILE: arch/powerpc/mm/tlb_hash32.c:87:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #170: FILE: arch/powerpc/mm/tlb_hash32.c:127:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #179: FILE: arch/powerpc/mm/tlb_hash32.c:148:
  +	if (Hash == NULL) {

  ERROR: space required after that ';' (ctx:VxV)
  #192: FILE: arch/powerpc/platforms/powermac/pci.c:65:
  +	for (; node != NULL;node = node->sibling) {

  CHECK: Comparison to NULL could be written "node"
  #192: FILE: arch/powerpc/platforms/powermac/pci.c:65:
  +	for (; node != NULL;node = node->sibling) {

  CHECK: Comparison to NULL could be written "!region"
  #201: FILE: arch/powerpc/platforms/powermac/pci.c:1227:
  +	if (region == NULL)

  CHECK: Comparison to NULL could be written "of_get_property"
  #214: FILE: arch/powerpc/platforms/powermac/setup.c:155:
  +		if (of_get_property(np, "cache-unified", NULL) != NULL && dc) {

  CHECK: Comparison to NULL could be written "!np"
  #223: FILE: arch/powerpc/platforms/powermac/setup.c:247:
  +		if (np == NULL)

  CHECK: Comparison to NULL could be written "np"
  #226: FILE: arch/powerpc/platforms/powermac/setup.c:249:
  +		if (np != NULL) {

  CHECK: Comparison to NULL could be written "l2cr"
  #230: FILE: arch/powerpc/platforms/powermac/setup.c:252:
  +			if (l2cr != NULL) {

  CHECK: Comparison to NULL could be written "via"
  #243: FILE: drivers/macintosh/via-pmu.c:277:
  +	if (via != NULL)

  CHECK: Comparison to NULL could be written "current_req"
  #252: FILE: drivers/macintosh/via-pmu.c:1155:
  +	if (current_req != NULL) {

  CHECK: Comparison to NULL could be written "!req"
  #261: FILE: drivers/macintosh/via-pmu.c:1230:
  +	if (req == NULL || pmu_state != idle

  CHECK: Comparison to NULL could be written "!req"
  #270: FILE: drivers/macintosh/via-pmu.c:1385:
  +			if (req == NULL) {

  CHECK: Comparison to NULL could be written "!pp"
  #288: FILE: drivers/macintosh/via-pmu.c:2084:
  +	if (pp == NULL)

  CHECK: Comparison to NULL could be written "!pp"
  #297: FILE: drivers/macintosh/via-pmu.c:2110:
  +	if (count < 1 || pp == NULL)

  CHECK: Comparison to NULL could be written "!pp"
  #306: FILE: drivers/macintosh/via-pmu.c:2167:
  +	if (pp == NULL)

  CHECK: Comparison to NULL could be written "pp"
  #315: FILE: drivers/macintosh/via-pmu.c:2183:
  +	if (pp != NULL) {

Link: https://github.com/linuxppc/linux/issues/37Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Some functions prototypes were missing for the non-altivec code. Add the
missing prototypes in a new header file, fix warnings treated as errors
with W=1:

  arch/powerpc/lib/xor_vmx_glue.c:18:6: error: no previous prototype for ‘xor_altivec_2’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:29:6: error: no previous prototype for ‘xor_altivec_3’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:40:6: error: no previous prototype for ‘xor_altivec_4’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:52:6: error: no previous prototype for ‘xor_altivec_5’ [-Werror=missing-prototypes]

The prototypes were already present in <asm/xor.h> but this header file is
meant to be included after <include/linux/raid/xor.h>. Trying to re-use
<asm/xor.h> directly would lead to warnings such as:

  arch/powerpc/include/asm/xor.h:39:15: error: variable ‘xor_block_altivec’ has initializer but incomplete type

Trying to re-use <asm/xor.h> after <include/linux/raid/xor.h> in
xor_vmx_glue.c would in turn trigger the following warnings:

  include/asm-generic/xor.h:688:34: error: ‘xor_block_32regs’ defined but not used [-Werror=unused-variable]
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

__printf is useful to verify format and arguments. Fix arg mismatch
reported by gcc, remove the following warnings (with W=1):

  arch/powerpc/kernel/prom_init.c:1467:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1471:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1504:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1505:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1506:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1507:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1508:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1509:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1975:39: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’
  arch/powerpc/kernel/prom_init.c:1986:27: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2567:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2567:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2569:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2569:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’

The patch also include arg mismatch fix for case with #define DEBUG_PROM
(warning not listed here).

This patch fix also the following warnings revealed by checkpatch:

  WARNING: Prefer using '"%s...", __func__' to using 'alloc_up', this function's name, in a string
  #101: FILE: arch/powerpc/kernel/prom_init.c:1235:
  + prom_debug("alloc_up(%lx, %lx)\n", size, align);

and

  WARNING: Prefer using '"%s...", __func__' to using 'alloc_down', this function's name, in a string
  #138: FILE: arch/powerpc/kernel/prom_init.c:1278:
  + prom_debug("alloc_down(%lx, %lx, %s)\n", size, align,
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The set of paca fields we dump in xmon has gotten somewhat out of
date. Update to add some recently added fields.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We've added some fields with longer names since we originally wrote
this, so the fields are no longer lined up. Adjust the widths to make
it all look nice again, eg:

  0:mon> dp
  paca for cpu 0x0 @ c000000001fa0000:
   possible                  = yes
   ...
   slb_shadow            [0] = 0xc000000008000000 0x400ea1b217000500
   slb_shadow            [1] = 0xd000000008000001 0x400d43642f000510
   ...
   rfi_flush_fallback_area   = c0000000fff80000   (0xcc8)
   ...
   accounting.starttime_user = 0x51582f07         (0xae8)
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This allows the compiler to verify the format strings vs the types of
the arguments.

Update the other prototype declarations in asm/xmon.h.

Silence warnings (triggered at W=1) by adding relevant __printf
attribute. Move #define at bottom of the file to prevent conflict with
gcc attribute.

Solves the original warning:

  arch/powerpc/xmon/nonstdio.c:178:2: error: function might be
  possible candidate for ‘gnu_printf’ format attribute

In turn this uncovered many formatting errors in xmon.c, all fixed in
this patch.
Signed-off-by: NMathieu Malaterre <malat@debian.org>
[mpe: Always use px not p, fixup the 44x specific code, tweak change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In dump_one_paca() the DUMP macro unconditionally prepends '#' to the
printf format specifier. In most cases we're using either 'x' or 'lx'
etc. and that is OK. But for 'p' and other formats using '#' is
actually undefined, and once we enable printf() checking for
xmon_printf() we will get warnings from the compiler.

So just have each usage specify the full format, that way we can omit
'#' when it's inappropriate.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NMathieu Malaterre <malat@debian.org>

When single-stepping kernel code from xmon without a debug hook
enabled the kernel crashes. This can happen when kernel starts with
xmon on crash disabled but xmon is entered using sysrq.

Call force_enable_xmon when single-stepping in xmon to install the
xmon debug hooks.

Fixes: e1368d0c ("powerpc/xmon: Setup debugger hooks when first break-point is set")
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Reviewed-by: NVaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

New binutils generate the following warning

  AS      arch/powerpc/kernel/head_8xx.o
arch/powerpc/kernel/head_8xx.S: Assembler messages:
arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression

This patch fixes it.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and
PPC_PTRACE_SETHWDEBUG.  This test was use to find the bugs fixed by
these recent commits:

  4f7c06e2 powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
  cd6ef7ee powerpc/ptrace: Fix enforcement of DAWR constraints
Signed-off-by: NMichael Neuling <mikey@neuling.org>
[mpe: Add SPDX tag, clang format it]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit a7a9dcd8 ("powerpc: Avoid taking a data miss on every
userspace instruction miss") has shown that limiting the read of
faulting instruction to likely cases improves performance.

This patch goes further into this direction by limiting the read
of the faulting instruction to the only cases where it is likely
needed.

On an MPC885, with the same benchmark app as in the commit referred
above, we see a reduction of about 3900 dTLB misses (approx 3%):

Before the patch:
 Performance counter stats for './fault 500' (10 runs):

         683033312      cpu-cycles                                                    ( +-  0.03% )
            134538      dTLB-load-misses                                              ( +-  0.03% )
             46099      iTLB-load-misses                                              ( +-  0.02% )
             19681      faults                                                        ( +-  0.02% )

       5.389747878 seconds time elapsed                                          ( +-  0.06% )

With the patch:

 Performance counter stats for './fault 500' (10 runs):

         682112862      cpu-cycles                                                    ( +-  0.03% )
            130619      dTLB-load-misses                                              ( +-  0.03% )
             46073      iTLB-load-misses                                              ( +-  0.05% )
             19681      faults                                                        ( +-  0.01% )

       5.381342641 seconds time elapsed                                          ( +-  0.07% )

The proper work of the huge stack expansion was tested with the
following app:

int main(int argc, char **argv)
{
	char buf[1024 * 1025];

	sprintf(buf, "Hello world !\n");
	printf(buf);

	exit(0);
}
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Add include of pagemap.h to fix build errors]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use symbolic names defined in asm/ppc-opcode.h
instead of hardcoded values.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch exports the accumulated power numbers of each power
sensor maintained by OCC.
Signed-off-by: NShilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The firmware has supported for reading sensor values of size u32.
This patch adds support to use newer firmware functions which allows
to read the sensors of size u64.
Signed-off-by: NShilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds support to read 64-bit sensor values. This method is
used to read energy sensors and counters which are of type u64.
Signed-off-by: NShilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Paste on POWER9 only works on accelerators and no longer on real
memory. Hence this test is broken so remove it.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The sanctioned compatible is "nxp,pca9547".
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit e2a800be ("powerpc/hw_brk: Fix off by one error when
validating DAWR region end") we fixed setting the DAWR end point to
its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke
PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint.

PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to
zero (memset() in hw_breakpoint_init()). This worked with
arch_validate_hwbkpt_settings() before the above patch was applied but
is now broken if the breakpoint is 512byte aligned.

This sets the length of the breakpoint to 8 bytes when using
PTRACE_SET_DEBUGREG.

Fixes: e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end")
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Back when we first introduced the DAWR, in commit 4ae7ebe9
("powerpc: Change hardware breakpoint to allow longer ranges"), we
screwed up the constraint making it a 1024 byte boundary rather than a
512. This makes the check overly permissive. Fortunately GDB is the
only real user and it always did they right thing, so we never
noticed.

This fixes the constraint to 512 bytes.

Fixes: 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This allows us to squash some sparse warnings and also avoids having
to do explicity endian conversions in the code.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>

This allows us to squash some sparse warnings and also avoids having
to do explicity endian conversions in the code.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>

Add byte-swapping versions of __raw_writeq() and __raw_rm_writeq().

This allows us to avoid sparse warnings caused by passing __be64 to
__raw_writeq(), which takes unsigned long:

  arch/powerpc/platforms/powernv/pci-ioda.c:1981:38:
  warning: incorrect type in argument 1 (different base types)
      expected unsigned long [unsigned] v
      got restricted __be64 [usertype] <noident>

It's also generally preferable to use a byte-swapping accessor rather
than doing it by hand in the code, which is more bug prone.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>

Currently memory is allocated for core-imc based on cpu_present_mask,
which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads
per core) as the array index to access the memory.

Under some circumstances firmware marks a CPU as GUARDed CPU and boot the
system, until cleared of errors, these CPU's are unavailable for all
subsequent boots. GUARDed CPUs are possible but not present from linux
view, so it blows a hole when we assume the max length of our allocation
is driven by our max present cpus, where as one of the cpus might be online
and be beyond the max present cpus, due to the hole.
So (cpu number / threads per core) value bounds the array index and leads
to memory overflow.

Call trace observed during a guard test:

Faulting instruction address: 0xc000000000149f1c
cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420]
    pc:c000000000149f1c: prefetch_freepointer+0x14/0x30
    lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac
    sp:c000003fea3036a0
   msr:9000000000009033
   dar:c9c54b2c91dbf6b7
  current = 0xc000003fea2c0000
  paca    = 0xc00000000fddd880	 softe: 3	 irq_happened: 0x01
    pid   = 1, comm = swapper/104
Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0
(Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018
enter ? for help
call trace:
	 __kmalloc+0x1a8/0x1ac
	 (unreliable)
	 init_imc_pmu+0x7f4/0xbf0
	 opal_imc_counters_probe+0x3fc/0x43c
	 platform_drv_probe+0x48/0x80
	 driver_probe_device+0x22c/0x308
	 __driver_attach+0xa0/0xd8
	 bus_for_each_dev+0x88/0xb4
	 driver_attach+0x2c/0x40
	 bus_add_driver+0x1e8/0x228
	 driver_register+0xd0/0x114
	 __platform_driver_register+0x50/0x64
	 opal_imc_driver_init+0x24/0x38
	 do_one_initcall+0x150/0x15c
	 kernel_init_freeable+0x250/0x254
	 kernel_init+0x1c/0x150
	 ret_from_kernel_thread+0x5c/0xc8

Allocating memory for core-imc based on cpu_possible_mask, which has
bit 'cpu' set iff cpu is populatable, will fix this issue.
Reported-by: NPridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: NBalbir Singh <bsingharora@gmail.com>
Tested-by: NPridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Fixes: 39a846db ("powerpc/perf: Add core IMC PMU support")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Trivial fix to spelling mistake in battery_charging array.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

My powerpc-linux-gnu-gcc v4.4.5 compiler can't build a 32-bit kernel
any more:

arch/powerpc/lib/sstep.c: In function 'do_popcnt':
arch/powerpc/lib/sstep.c:1068: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1070: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1079: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c: In function 'do_prty':
arch/powerpc/lib/sstep.c:1117: error: integer constant is too large for 'long' type

This file gets compiled with -std=gnu89 which means a constant can be
given the type 'long' even if it won't fit. Fix the errors with a 'ULL'
suffix on the relevant constants.

Fixes: 2c979c48 ("powerpc/lib/sstep: Add prty instruction emulation")
Fixes: dcbd19b4 ("powerpc/lib/sstep: Add popcnt instruction emulation")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

A kernel crash in process context that calls emergency_restart from
panic will end up calling opal_event_shutdown with interrupts disabled
but not in interrupt. This causes a sleeping function to be called
which gives the following warning with sysrq+c:

    Rebooting in 10 seconds..
    BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
    in_atomic(): 0, irqs_disabled(): 1, pid: 7669, name: bash
    CPU: 20 PID: 7669 Comm: bash Tainted: G      D W         4.17.0-rc5+ #3
    Call Trace:
    dump_stack+0xb0/0xf4 (unreliable)
    ___might_sleep+0x174/0x1a0
    mutex_lock+0x38/0xb0
    __free_irq+0x68/0x460
    free_irq+0x70/0xc0
    opal_event_shutdown+0xb4/0xf0
    opal_shutdown+0x24/0xa0
    pnv_shutdown+0x28/0x40
    machine_shutdown+0x44/0x60
    machine_restart+0x28/0x80
    emergency_restart+0x30/0x50
    panic+0x2a0/0x328
    oops_end+0x1ec/0x1f0
    bad_page_fault+0xe8/0x154
    handle_page_fault+0x34/0x38
    --- interrupt: 300 at sysrq_handle_crash+0x44/0x60
    LR = __handle_sysrq+0xfc/0x260
    flag_spec.62335+0x12b844/0x1e8db4 (unreliable)
    __handle_sysrq+0xfc/0x260
    write_sysrq_trigger+0xa8/0xb0
    proc_reg_write+0xac/0x110
    __vfs_write+0x6c/0x240
    vfs_write+0xd0/0x240
    ksys_write+0x6c/0x110

Fixes: 9f0fd049 ("powerpc/powernv: Add a virtual irqchip for opal events")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

arch/powerpc/Makefile activates -mmultiple on BE PPC32 configs
in order to use multiple word instructions in functions entry/exit.

The patch does the same for the asm parts, for consistency.

On processors like the 8xx on which insn fetching is pretty slow,
this speeds up registers save/restore.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[mpe: PPC32 is BE only, so drop the endian checks]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Doing the test at exit of the function avoids an unnecessary
test and branch inside longjmp().

Semantics are unchanged.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This reverts commit 6ad966d7.

That commit was pointless, because csum_add() sums two 32 bits
values, so the sum is 0x1fffffffe at the maximum.
And then when adding upper part (1) and lower part (0xfffffffe),
the result is 0xffffffff which doesn't carry.
Any lower value will not carry either.

And behind the fact that this commit is useless, it also kills the
whole purpose of having an arch specific inline csum_add()
because the resulting code gets even worse than what is obtained
with the generic implementation of csum_add()

0000000000000240 <.csum_add>:
 240:	38 00 ff ff 	li      r0,-1
 244:	7c 84 1a 14 	add     r4,r4,r3
 248:	78 00 00 20 	clrldi  r0,r0,32
 24c:	78 89 00 22 	rldicl  r9,r4,32,32
 250:	7c 80 00 38 	and     r0,r4,r0
 254:	7c 09 02 14 	add     r0,r9,r0
 258:	78 09 00 22 	rldicl  r9,r0,32,32
 25c:	7c 00 4a 14 	add     r0,r0,r9
 260:	78 03 00 20 	clrldi  r3,r0,32
 264:	4e 80 00 20 	blr

In comparison, the generic implementation of csum_add() gives:

0000000000000290 <.csum_add>:
 290:	7c 63 22 14 	add     r3,r3,r4
 294:	7f 83 20 40 	cmplw   cr7,r3,r4
 298:	7c 10 10 26 	mfocrf  r0,1
 29c:	54 00 ef fe 	rlwinm  r0,r0,29,31,31
 2a0:	7c 60 1a 14 	add     r3,r0,r3
 2a4:	78 63 00 20 	clrldi  r3,r3,32
 2a8:	4e 80 00 20 	blr

And the reverted implementation for PPC64 gives:

0000000000000240 <.csum_add>:
 240:	7c 84 1a 14 	add     r4,r4,r3
 244:	78 80 00 22 	rldicl  r0,r4,32,32
 248:	7c 80 22 14 	add     r4,r0,r4
 24c:	78 83 00 20 	clrldi  r3,r4,32
 250:	4e 80 00 20 	blr

Fixes: 6ad966d7 ("powerpc/64: Fix checksum folding in csum_add()")
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>