Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 3月, 2019 1 次提交
    • A
      kasan: fix kasan_check_read/write definitions · bcf6f55a
      由 Arnd Bergmann 提交于 
      Building little-endian allmodconfig kernels on arm64 started failing
with the generated atomic.h implementation, since we now try to call
kasan helpers from the EFI stub:

  aarch64-linux-gnu-ld: drivers/firmware/efi/libstub/arm-stub.stub.o: in function `atomic_set':
  include/generated/atomic-instrumented.h:44: undefined reference to `__efistub_kasan_check_write'

I suspect that we get similar problems in other files that explicitly
disable KASAN for some reason but call atomic_t based helper functions.

We can fix this by checking the predefined __SANITIZE_ADDRESS__ macro
that the compiler sets instead of checking CONFIG_KASAN, but this in
turn requires a small hack in mm/kasan/common.c so we do see the extern
declaration there instead of the inline function.

Link: http://lkml.kernel.org/r/20181211133453.2835077-1-arnd@arndb.de
Fixes: b1864b828644 ("locking/atomics: build atomic headers as required")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NAnders Roxell <anders.roxell@linaro.org>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bcf6f55a
  3. 22 2月, 2019 1 次提交
  5. 09 1月, 2019 2 次提交
  7. 29 12月, 2018 7 次提交
    • A
      kasan: add SPDX-License-Identifier mark to source files · e886bf9d
      由 Andrey Konovalov 提交于 
      This patch adds a "SPDX-License-Identifier: GPL-2.0" mark to all source
files under mm/kasan.

Link: http://lkml.kernel.org/r/bce2d1e618afa5142e81961ab8fa4b4165337380.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e886bf9d
    • A
      kasan: add __must_check annotations to kasan hooks · 66afc7f1
      由 Andrey Konovalov 提交于 
      This patch adds __must_check annotations to kasan hooks that return a
pointer to make sure that a tagged pointer always gets propagated.

Link: http://lkml.kernel.org/r/03b269c5e453945f724bfca3159d4e1333a8fb1c.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Suggested-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      66afc7f1
    • A
      kasan, mm, arm64: tag non slab memory allocated via pagealloc · 2813b9c0
      由 Andrey Konovalov 提交于 
      Tag-based KASAN doesn't check memory accesses through pointers tagged with
0xff.  When page_address is used to get pointer to memory that corresponds
to some page, the tag of the resulting pointer gets set to 0xff, even
though the allocated memory might have been tagged differently.

For slab pages it's impossible to recover the correct tag to return from
page_address, since the page might contain multiple slab objects tagged
with different values, and we can't know in advance which one of them is
going to get accessed.  For non slab pages however, we can recover the tag
in page_address, since the whole page was marked with the same tag.

This patch adds tagging to non slab memory allocated with pagealloc.  To
set the tag of the pointer returned from page_address, the tag gets stored
to page->flags when the memory gets allocated.

Link: http://lkml.kernel.org/r/d758ddcef46a5abc9970182b9137e2fbee202a2c.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2813b9c0
    • A
      kasan: add hooks implementation for tag-based mode · 7f94ffbc
      由 Andrey Konovalov 提交于 
      This commit adds tag-based KASAN specific hooks implementation and
adjusts common generic and tag-based KASAN ones.

1. When a new slab cache is created, tag-based KASAN rounds up the size of
   the objects in this cache to KASAN_SHADOW_SCALE_SIZE (== 16).

2. On each kmalloc tag-based KASAN generates a random tag, sets the shadow
   memory, that corresponds to this object to this tag, and embeds this
   tag value into the top byte of the returned pointer.

3. On each kfree tag-based KASAN poisons the shadow memory with a random
   tag to allow detection of use-after-free bugs.

The rest of the logic of the hook implementation is very much similar to
the one provided by generic KASAN. Tag-based KASAN saves allocation and
free stack metadata to the slab object the same way generic KASAN does.

Link: http://lkml.kernel.org/r/bda78069e3b8422039794050ddcb2d53d053ed41.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7f94ffbc
    • A
      kasan: initialize shadow to 0xff for tag-based mode · 080eb83f
      由 Andrey Konovalov 提交于 
      A tag-based KASAN shadow memory cell contains a memory tag, that
corresponds to the tag in the top byte of the pointer, that points to that
memory.  The native top byte value of kernel pointers is 0xff, so with
tag-based KASAN we need to initialize shadow memory to 0xff.

[cai@lca.pw: arm64: skip kmemleak for KASAN again\
  Link: http://lkml.kernel.org/r/20181226020550.63712-1-cai@lca.pw
Link: http://lkml.kernel.org/r/5cc1b789aad7c99cf4f3ec5b328b147ad53edb40.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      080eb83f
    • A
      kasan: move common generic and tag-based code to common.c · bffa986c
      由 Andrey Konovalov 提交于 
      Tag-based KASAN reuses a significant part of the generic KASAN code, so
move the common parts to common.c without any functional changes.

Link: http://lkml.kernel.org/r/114064d002356e03bb8cc91f7835e20dc61b51d9.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bffa986c
    • A
      kasan, mm: change hooks signatures · 0116523c
      由 Andrey Konovalov 提交于 
      Patch series "kasan: add software tag-based mode for arm64", v13.

This patchset adds a new software tag-based mode to KASAN [1].  (Initially
this mode was called KHWASAN, but it got renamed, see the naming rationale
at the end of this section).

The plan is to implement HWASan [2] for the kernel with the incentive,
that it's going to have comparable to KASAN performance, but in the same
time consume much less memory, trading that off for somewhat imprecise bug
detection and being supported only for arm64.

The underlying ideas of the approach used by software tag-based KASAN are:

1. By using the Top Byte Ignore (TBI) arm64 CPU feature, we can store
   pointer tags in the top byte of each kernel pointer.

2. Using shadow memory, we can store memory tags for each chunk of kernel
   memory.

3. On each memory allocation, we can generate a random tag, embed it into
   the returned pointer and set the memory tags that correspond to this
   chunk of memory to the same value.

4. By using compiler instrumentation, before each memory access we can add
   a check that the pointer tag matches the tag of the memory that is being
   accessed.

5. On a tag mismatch we report an error.

With this patchset the existing KASAN mode gets renamed to generic KASAN,
with the word "generic" meaning that the implementation can be supported
by any architecture as it is purely software.

The new mode this patchset adds is called software tag-based KASAN.  The
word "tag-based" refers to the fact that this mode uses tags embedded into
the top byte of kernel pointers and the TBI arm64 CPU feature that allows
to dereference such pointers.  The word "software" here means that shadow
memory manipulation and tag checking on pointer dereference is done in
software.  As it is the only tag-based implementation right now, "software
tag-based" KASAN is sometimes referred to as simply "tag-based" in this
patchset.

A potential expansion of this mode is a hardware tag-based mode, which
would use hardware memory tagging support (announced by Arm [3]) instead
of compiler instrumentation and manual shadow memory manipulation.

Same as generic KASAN, software tag-based KASAN is strictly a debugging
feature.

[1] https://www.kernel.org/doc/html/latest/dev-tools/kasan.html

[2] http://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html

[3] https://community.arm.com/processors/b/blog/posts/arm-a-profile-architecture-2018-developments-armv85a

====== Rationale

On mobile devices generic KASAN's memory usage is significant problem.
One of the main reasons to have tag-based KASAN is to be able to perform a
similar set of checks as the generic one does, but with lower memory
requirements.

Comment from Vishwath Mohan <vishwath@google.com>:

I don't have data on-hand, but anecdotally both ASAN and KASAN have proven
problematic to enable for environments that don't tolerate the increased
memory pressure well.  This includes

(a) Low-memory form factors - Wear, TV, Things, lower-tier phones like Go,
(c) Connected components like Pixel's visual core [1].

These are both places I'd love to have a low(er) memory footprint option at
my disposal.

Comment from Evgenii Stepanov <eugenis@google.com>:

Looking at a live Android device under load, slab (according to
/proc/meminfo) + kernel stack take 8-10% available RAM (~350MB).  KASAN's
overhead of 2x - 3x on top of it is not insignificant.

Not having this overhead enables near-production use - ex.  running
KASAN/KHWASAN kernel on a personal, daily-use device to catch bugs that do
not reproduce in test configuration.  These are the ones that often cost
the most engineering time to track down.

CPU overhead is bad, but generally tolerable.  RAM is critical, in our
experience.  Once it gets low enough, OOM-killer makes your life
miserable.

[1] https://www.blog.google/products/pixel/pixel-visual-core-image-processing-and-machine-learning-pixel-2/

====== Technical details

Software tag-based KASAN mode is implemented in a very similar way to the
generic one. This patchset essentially does the following:

1. TCR_TBI1 is set to enable Top Byte Ignore.

2. Shadow memory is used (with a different scale, 1:16, so each shadow
   byte corresponds to 16 bytes of kernel memory) to store memory tags.

3. All slab objects are aligned to shadow scale, which is 16 bytes.

4. All pointers returned from the slab allocator are tagged with a random
   tag and the corresponding shadow memory is poisoned with the same value.

5. Compiler instrumentation is used to insert tag checks. Either by
   calling callbacks or by inlining them (CONFIG_KASAN_OUTLINE and
   CONFIG_KASAN_INLINE flags are reused).

6. When a tag mismatch is detected in callback instrumentation mode
   KASAN simply prints a bug report. In case of inline instrumentation,
   clang inserts a brk instruction, and KASAN has it's own brk handler,
   which reports the bug.

7. The memory in between slab objects is marked with a reserved tag, and
   acts as a redzone.

8. When a slab object is freed it's marked with a reserved tag.

Bug detection is imprecise for two reasons:

1. We won't catch some small out-of-bounds accesses, that fall into the
   same shadow cell, as the last byte of a slab object.

2. We only have 1 byte to store tags, which means we have a 1/256
   probability of a tag match for an incorrect access (actually even
   slightly less due to reserved tag values).

Despite that there's a particular type of bugs that tag-based KASAN can
detect compared to generic KASAN: use-after-free after the object has been
allocated by someone else.

====== Testing

Some kernel developers voiced a concern that changing the top byte of
kernel pointers may lead to subtle bugs that are difficult to discover.
To address this concern deliberate testing has been performed.

It doesn't seem feasible to do some kind of static checking to find
potential issues with pointer tagging, so a dynamic approach was taken.
All pointer comparisons/subtractions have been instrumented in an LLVM
compiler pass and a kernel module that would print a bug report whenever
two pointers with different tags are being compared/subtracted (ignoring
comparisons with NULL pointers and with pointers obtained by casting an
error code to a pointer type) has been used.  Then the kernel has been
booted in QEMU and on an Odroid C2 board and syzkaller has been run.

This yielded the following results.

The two places that look interesting are:

is_vmalloc_addr in include/linux/mm.h
is_kernel_rodata in mm/util.c

Here we compare a pointer with some fixed untagged values to make sure
that the pointer lies in a particular part of the kernel address space.
Since tag-based KASAN doesn't add tags to pointers that belong to rodata
or vmalloc regions, this should work as is.  To make sure debug checks to
those two functions that check that the result doesn't change whether we
operate on pointers with or without untagging has been added.

A few other cases that don't look that interesting:

Comparing pointers to achieve unique sorting order of pointee objects
(e.g. sorting locks addresses before performing a double lock):

tty_ldisc_lock_pair_timeout in drivers/tty/tty_ldisc.c
pipe_double_lock in fs/pipe.c
unix_state_double_lock in net/unix/af_unix.c
lock_two_nondirectories in fs/inode.c
mutex_lock_double in kernel/events/core.c

ep_cmp_ffd in fs/eventpoll.c
fsnotify_compare_groups fs/notify/mark.c

Nothing needs to be done here, since the tags embedded into pointers
don't change, so the sorting order would still be unique.

Checks that a pointer belongs to some particular allocation:

is_sibling_entry in lib/radix-tree.c
object_is_on_stack in include/linux/sched/task_stack.h

Nothing needs to be done here either, since two pointers can only belong
to the same allocation if they have the same tag.

Overall, since the kernel boots and works, there are no critical bugs.
As for the rest, the traditional kernel testing way (use until fails) is
the only one that looks feasible.

Another point here is that tag-based KASAN is available under a separate
config option that needs to be deliberately enabled. Even though it might
be used in a "near-production" environment to find bugs that are not found
during fuzzing or running tests, it is still a debug tool.

====== Benchmarks

The following numbers were collected on Odroid C2 board. Both generic and
tag-based KASAN were used in inline instrumentation mode.

Boot time [1]:
* ~1.7 sec for clean kernel
* ~5.0 sec for generic KASAN
* ~5.0 sec for tag-based KASAN

Network performance [2]:
* 8.33 Gbits/sec for clean kernel
* 3.17 Gbits/sec for generic KASAN
* 2.85 Gbits/sec for tag-based KASAN

Slab memory usage after boot [3]:
* ~40 kb for clean kernel
* ~105 kb (~260% overhead) for generic KASAN
* ~47 kb (~20% overhead) for tag-based KASAN

KASAN memory overhead consists of three main parts:
1. Increased slab memory usage due to redzones.
2. Shadow memory (the whole reserved once during boot).
3. Quaratine (grows gradually until some preset limit; the more the limit,
   the more the chance to detect a use-after-free).

Comparing tag-based vs generic KASAN for each of these points:
1. 20% vs 260% overhead.
2. 1/16th vs 1/8th of physical memory.
3. Tag-based KASAN doesn't require quarantine.

[1] Time before the ext4 driver is initialized.
[2] Measured as `iperf -s & iperf -c 127.0.0.1 -t 30`.
[3] Measured as `cat /proc/meminfo | grep Slab`.

====== Some notes

A few notes:

1. The patchset can be found here:
   https://github.com/xairy/kasan-prototype/tree/khwasan

2. Building requires a recent Clang version (7.0.0 or later).

3. Stack instrumentation is not supported yet and will be added later.

This patch (of 25):

Tag-based KASAN changes the value of the top byte of pointers returned
from the kernel allocation functions (such as kmalloc).  This patch
updates KASAN hooks signatures and their usage in SLAB and SLUB code to
reflect that.

Link: http://lkml.kernel.org/r/aec2b5e3973781ff8a6bb6760f8543643202c451.1544099024.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0116523c
  9. 04 7月, 2018 1 次提交
  11. 26 5月, 2018 3 次提交
  13. 06 4月, 2018 2 次提交
  15. 07 2月, 2018 8 次提交
  17. 16 11月, 2017 1 次提交
  19. 26 7月, 2017 1 次提交
  21. 11 7月, 2017 3 次提交
  23. 09 5月, 2017 1 次提交
  25. 04 5月, 2017 1 次提交
  27. 19 4月, 2017 1 次提交
    • P
      mm: Rename SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU · 5f0d5a3a
      由 Paul E. McKenney 提交于 
      A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section.  Of course, that is not the
case.  Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.

However, there is a phrase for this, namely "type safety".  This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
  Dumazet, in order to help people familiar with the old name find
  the new one. ]
Acked-by: NDavid Rientjes <rientjes@google.com>
      5f0d5a3a
  29. 02 3月, 2017 2 次提交
    • I
      sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h> · 68db0cf1
      由 Ingo Molnar 提交于 
      We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      68db0cf1
    • I
      kasan, sched/headers: Uninline kasan_enable/disable_current() · af8601ad
      由 Ingo Molnar 提交于 
      <linux/kasan.h> is a low level header that is included early
in affected kernel headers. But it includes <linux/sched.h>
which complicates the cleanup of sched.h dependencies.

But kasan.h has almost no need for sched.h: its only use of
scheduler functionality is in two inline functions which are
not used very frequently - so uninline kasan_enable_current()
and kasan_disable_current().

Also add a <linux/sched.h> dependency to a .c file that depended
on kasan.h including it.

This paves the way to remove the <linux/sched.h> include from kasan.h.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      af8601ad
  31. 25 2月, 2017 1 次提交
    • G
      kasan: drain quarantine of memcg slab objects · f9fa1d91
      由 Greg Thelen 提交于 
      Per memcg slab accounting and kasan have a problem with kmem_cache
destruction.
 - kmem_cache_create() allocates a kmem_cache, which is used for
   allocations from processes running in root (top) memcg.
 - Processes running in non root memcg and allocating with either
   __GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg
   kmem_cache.
 - Kasan catches use-after-free by having kfree() and kmem_cache_free()
   defer freeing of objects. Objects are placed in a quarantine.
 - kmem_cache_destroy() destroys root and non root kmem_caches. It takes
   care to drain the quarantine of objects from the root memcg's
   kmem_cache, but ignores objects associated with non root memcg. This
   causes leaks because quarantined per memcg objects refer to per memcg
   kmem cache being destroyed.

To see the problem:

 1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,)
 2) from non root memcg, allocate and free a few objects from cache
 3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy()
    will trigger a "Slab cache still has objects" warning indicating
    that the per memcg kmem_cache structure was leaked.

Fix the leak by draining kasan quarantined objects allocated from non
root memcg.

Racing memcg deletion is tricky, but handled.  kmem_cache_destroy() =>
shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache()
flushes per memcg quarantined objects, even if that memcg has been
rmdir'd and gone through memcg_deactivate_kmem_caches().

This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is
enabled.  So I don't think it's worth patching stable kernels.

Link: http://lkml.kernel.org/r/1482257462-36948-1-git-send-email-gthelen@google.comSigned-off-by: NGreg Thelen <gthelen@google.com>
Reviewed-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f9fa1d91
  33. 06 12月, 2016 1 次提交
    • J
      x86/suspend: fix false positive KASAN warning on suspend/resume · b53f40db
      由 Josh Poimboeuf 提交于 
      Resuming from a suspend operation is showing a KASAN false positive
warning:

  BUG: KASAN: stack-out-of-bounds in unwind_get_return_address+0x11d/0x130 at addr ffff8803867d7878
  Read of size 8 by task pm-suspend/7774
  page:ffffea000e19f5c0 count:0 mapcount:0 mapping:          (null) index:0x0
  flags: 0x2ffff0000000000()
  page dumped because: kasan: bad access detected
  CPU: 0 PID: 7774 Comm: pm-suspend Tainted: G    B           4.9.0-rc7+ #8
  Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016
  Call Trace:
    dump_stack+0x63/0x82
    kasan_report_error+0x4b4/0x4e0
    ? acpi_hw_read_port+0xd0/0x1ea
    ? kfree_const+0x22/0x30
    ? acpi_hw_validate_io_request+0x1a6/0x1a6
    __asan_report_load8_noabort+0x61/0x70
    ? unwind_get_return_address+0x11d/0x130
    unwind_get_return_address+0x11d/0x130
    ? unwind_next_frame+0x97/0xf0
    __save_stack_trace+0x92/0x100
    save_stack_trace+0x1b/0x20
    save_stack+0x46/0xd0
    ? save_stack_trace+0x1b/0x20
    ? save_stack+0x46/0xd0
    ? kasan_kmalloc+0xad/0xe0
    ? kasan_slab_alloc+0x12/0x20
    ? acpi_hw_read+0x2b6/0x3aa
    ? acpi_hw_validate_register+0x20b/0x20b
    ? acpi_hw_write_port+0x72/0xc7
    ? acpi_hw_write+0x11f/0x15f
    ? acpi_hw_read_multiple+0x19f/0x19f
    ? memcpy+0x45/0x50
    ? acpi_hw_write_port+0x72/0xc7
    ? acpi_hw_write+0x11f/0x15f
    ? acpi_hw_read_multiple+0x19f/0x19f
    ? kasan_unpoison_shadow+0x36/0x50
    kasan_kmalloc+0xad/0xe0
    kasan_slab_alloc+0x12/0x20
    kmem_cache_alloc_trace+0xbc/0x1e0
    ? acpi_get_sleep_type_data+0x9a/0x578
    acpi_get_sleep_type_data+0x9a/0x578
    acpi_hw_legacy_wake_prep+0x88/0x22c
    ? acpi_hw_legacy_sleep+0x3c7/0x3c7
    ? acpi_write_bit_register+0x28d/0x2d3
    ? acpi_read_bit_register+0x19b/0x19b
    acpi_hw_sleep_dispatch+0xb5/0xba
    acpi_leave_sleep_state_prep+0x17/0x19
    acpi_suspend_enter+0x154/0x1e0
    ? trace_suspend_resume+0xe8/0xe8
    suspend_devices_and_enter+0xb09/0xdb0
    ? printk+0xa8/0xd8
    ? arch_suspend_enable_irqs+0x20/0x20
    ? try_to_freeze_tasks+0x295/0x600
    pm_suspend+0x6c9/0x780
    ? finish_wait+0x1f0/0x1f0
    ? suspend_devices_and_enter+0xdb0/0xdb0
    state_store+0xa2/0x120
    ? kobj_attr_show+0x60/0x60
    kobj_attr_store+0x36/0x70
    sysfs_kf_write+0x131/0x200
    kernfs_fop_write+0x295/0x3f0
    __vfs_write+0xef/0x760
    ? handle_mm_fault+0x1346/0x35e0
    ? do_iter_readv_writev+0x660/0x660
    ? __pmd_alloc+0x310/0x310
    ? do_lock_file_wait+0x1e0/0x1e0
    ? apparmor_file_permission+0x18/0x20
    ? security_file_permission+0x73/0x1c0
    ? rw_verify_area+0xbd/0x2b0
    vfs_write+0x149/0x4a0
    SyS_write+0xd9/0x1c0
    ? SyS_read+0x1c0/0x1c0
    entry_SYSCALL_64_fastpath+0x1e/0xad
  Memory state around the buggy address:
   ffff8803867d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffff8803867d7780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >ffff8803867d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f4
                                                                  ^
   ffff8803867d7880: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
   ffff8803867d7900: 00 00 00 f1 f1 f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00

KASAN instrumentation poisons the stack when entering a function and
unpoisons it when exiting the function.  However, in the suspend path,
some functions never return, so their stack never gets unpoisoned,
resulting in stale KASAN shadow data which can cause later false
positive warnings like the one above.
Reported-by: NScott Bauer <scott.bauer@intel.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      b53f40db
  35. 01 12月, 2016 1 次提交
  37. 16 10月, 2016 1 次提交
    • D
      kprobes: Unpoison stack in jprobe_return() for KASAN · 9f7d416c
      由 Dmitry Vyukov 提交于 
      I observed false KSAN positives in the sctp code, when
sctp uses jprobe_return() in jsctp_sf_eat_sack().

The stray 0xf4 in shadow memory are stack redzones:

[     ] ==================================================================
[     ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480
[     ] Read of size 1 by task syz-executor/18535
[     ] page:ffffea00017923c0 count:0 mapcount:0 mapping:          (null) index:0x0
[     ] flags: 0x1fffc0000000000()
[     ] page dumped because: kasan: bad access detected
[     ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28
[     ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[     ]  ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8
[     ]  ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000
[     ]  ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370
[     ] Call Trace:
[     ]  [<ffffffff82d2b849>] dump_stack+0x12e/0x185
[     ]  [<ffffffff817d3169>] kasan_report+0x489/0x4b0
[     ]  [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20
[     ]  [<ffffffff82d49529>] memcmp+0xe9/0x150
[     ]  [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0
[     ]  [<ffffffff817d2031>] save_stack+0xb1/0xd0
[     ]  [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0
[     ]  [<ffffffff817d05b8>] kfree+0xc8/0x2a0
[     ]  [<ffffffff85b03f19>] skb_free_head+0x79/0xb0
[     ]  [<ffffffff85b0900a>] skb_release_data+0x37a/0x420
[     ]  [<ffffffff85b090ff>] skb_release_all+0x4f/0x60
[     ]  [<ffffffff85b11348>] consume_skb+0x138/0x370
[     ]  [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180
[     ]  [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70
[     ]  [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0
[     ]  [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0
[     ]  [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190
[     ]  [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20
[ ... ]
[     ] Memory state around the buggy address:
[     ]  ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[     ]  ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[     ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[     ]                    ^
[     ]  ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[     ]  ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[     ] ==================================================================

KASAN stack instrumentation poisons stack redzones on function entry
and unpoisons them on function exit. If a function exits abnormally
(e.g. with a longjmp like jprobe_return()), stack redzones are left
poisoned. Later this leads to random KASAN false reports.

Unpoison stack redzones in the frames we are going to jump over
before doing actual longjmp in jprobe_return().
Signed-off-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: kasan-dev@googlegroups.com
Cc: surovegin@google.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      9f7d416c
  39. 03 8月, 2016 1 次提交