- 13 11月, 2005 3 次提交
-
-
由 Jeff Garzik 提交于
Based largely on the GPL'd Marvell vendor driver.
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
-
- 12 11月, 2005 34 次提交
-
-
由 Jeff Garzik 提交于
- clear SError and EDMA irq cause registers, after re-init'ing the phy - move enums with type suffix 'U' to their own enum
-
由 Jeff Garzik 提交于
Although according to the documentation this largely only affects desktop LED control, let's make sure we set the ATAPI bit when we have an ATAPI device attached to the port.
-
由 Jeff Garzik 提交于
Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
-
由 Linus Torvalds 提交于
As per the new release rules: two weeks of merging, and then an -rc1 and calming down for the next release.
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Neil Horman 提交于
Also introduces a sysctl option to configure the receive buffer accounting policy to be either at socket or association level. Default is all the associations on the same socket share the receive buffer. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
On ia64, it is possible to get NaT Consumption Fault and a kernel panic when initializing sctp sideeffect commands arguments. The union sctp_arg_t contains different sized elements and when loading a smaller sized element (32 or 16 bits), it is possible for a speculative load to fail and result in a NaT bit set which causes a kernel crash. The easy way to get around it is to load the largerst member of the union. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
The socket level timeout values are maintained in sctp_sock and association level timeouts are in sctp_association. So there is no need for ep->timeouts. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
It is possible to get to sctp_v4_get_saddr() without a valid association. This happens when processing OOTB packets and the cached route entry is no longer valid. However, when responding to OOTB packets we already properly set the source address based on the information in the OOTB packet. So, if we we get to sctp_v4_get_saddr() without an association we can simply return. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based mostly upon a patch from Olaf Kirch <okir@suse.de> When initialization fails in inet6_init(), we should unregister the PF_INET6 socket ops. Also, check sock_register()'s return value for errors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Christie 提交于
scsi_wait_req does not exist any more in the SCSI layer. This patch makes it so libata can compile again. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
After the last merge of the new unified 'powerpc' architecture, ppc64 no longer compiles cleanly as a standalone architecture. Some bits and pieces still exist as files under the old ppc64 hierarchy, but the old "ARCH=ppc64" is dead. So if "uname" says ppc64, that now implies that the default architecture should be "powerpc". Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Update the ixp2000 defconfigs to 2.6.14-git13. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David S. Miller 提交于
Noticed by Tom 'spot' Callaway. Even on uniprocessor we always reported the number of physical cpus in the system via /proc/cpuinfo. But when this got changed to use num_possible_cpus() it always reads as "1" on uniprocessor. This change was unintentional. So scan the firmware device tree and count the number of cpu nodes, and report that, as we always did. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick Caulfield 提交于
Currently recvmsg generates SIGPIPE whereas sendmsg does not; for the other stacks it seems to be the other way round! It also fixes the bug where reading from a socket whose peer has shutdown returned -EINVAL rather than 0. Signed-off-by: NPatrick Caulfield <patrick@tykepenguin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Maule 提交于
Fix default VGA console on SN platforms. Since SN firmware does not pass enough ACPI information to identify VGA cards and the associated legacy IO/MEM addresses, we rely on the EFI PCDP table. Since the linux pcdp driver is optional (and overridden if console= directives are used) SN duplicates a portion of the pcdp scan code to identify if there is a usable console VGA adapter. Additionally, dup necessary pcdp related structs to avoid dragging drivers/pcdp.h into a more public location. Signed-off-by: NMark Maule <maule@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Robin Holt 提交于
This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range. It also introduces a config option (setting the default to 3 levels). The config option prevents having 4 level page tables with 64k base page size. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Hironobu Ishii 提交于
Part of a patch was accidentally reverted, this corrects an inconsistent spinlock use in the IPMI message handler. Signed-off-by: NHironobu Ishii <hishii@soft.fujitsu.com> Signed-off-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Jeff Garzik 提交于
Recent TCP changes broke the build. Signed-off-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 3 次提交
-
-
由 Ralf Baechle 提交于
As part of the ISO C9x conversion gcc deprecates concatenation with __FUNCTION__ because __FUNCTION__ is not a preprocessor macro. Signed-off-by: NClemens Buchacher <drizzd@aon.at> Signed-off-by: NMaximilian Attems <janitor@sternwelten.at> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Pete Popov 提交于
The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Ralf Baechle 提交于
o Try to work around some of the undocumented "features" of the SAA9730 o Use netdev_priv() instead of the previous broken mechanism to allocate the private data structure. o Try to make sure we don't leak resources on exit. o No more need to call SET_MODULE_OWNER in 2.6. o Use pci_free_consistent instead of homegrown architecture-specific allocation. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 531 +++++++++++++++++++++++--------------------------- 1 files changed, 249 insertions(+), 282 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-