- 29 1月, 2014 1 次提交
-
-
由 Ding Tianhong 提交于
The commit 1d3ee88a (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2014 24 次提交
-
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so lp_interval would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so resend_igmp would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so all_slaves_active would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so active_slave would use the new bonding option API. Also some trivial/style fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so use_carrier would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so primary_reselect would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so primary would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so miimon would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so num_peer_notif would use the new bonding option API. When the auto-sysfs generation is done an alias should be added for this option as there're currently 2 entries in sysfs for it. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so ad_select would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so min_links would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so lacp_rate would use the new bonding option API. Also some trivial/style error fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so updelay would use the new bonding option API. Also some trivial style fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so downdelay would use the new bonding option API. Also some trivial style fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_ip_target would use the new bonding option API. This option is an exception because of the way it's currently implemented that's why its netlink code is a bit different from the other options to keep the functionality as before and at the same time to have a single set function. This patch also fixes a few stylistic errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_interval would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so fail_over_mac would use the new bonding option API. Also fixes a trivial copy/paste error in bond_check_params where the wrong variable was used for the error msg. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_all_targets would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so xmit_hash_policy would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so packets_per_slave would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch makes the bond's mode setting use the new option API and adds support for dependency printing which relies on having an entry for the mode option in the bond_opts[] array. Also add the ability to print the mode name when mode dependency fails and fix some trivial/style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 1月, 2014 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a95 resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zipReported-by: NJakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2014 2 次提交
-
-
If link is IFF_SLAVE, extend link dev netlink attributes to include slave attributes with new IFLA_SLAVE nest. Add netlink notification (RTM_NEWLINK) when slave status changes from backup to active, or visa-versa. Adds new ndo_get_slave op to net_device_ops to fill skb with IFLA_SLAVE attributes. Currently only used by bonding driver, but could be used by other aggregating devices with slaves. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2014 2 次提交
-
-
Add IFLA_BOND_AD_SELECT to allow get/set of bonding parameter ad_select via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_AD_LACP_RATE to allow get/set of bonding parameter lacp_rate via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 2 次提交
-
-
由 stephen hemminger 提交于
More functions in bonding that can be declared static because they are only used in one file. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The return value for bond_dev_queue_xmit() will not be used anymore, so remove the return value. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2013 1 次提交
-
-
由 stephen hemminger 提交于
bond_xmit_slave_id is only used in main. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2013 5 次提交
-
-
Add IFLA_BOND_PACKETS_PER_SLAVE to allow get/set of bonding parameter packets_per_slave via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_LP_INTERVAL to allow get/set of bonding parameter lp_interval via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_MIN_LINKS to allow get/set of bonding parameter min_links via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_ALL_SLAVES_ACTIVE to allow get/set of bonding parameter all_slaves_active via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_NUM_PEER_NOTIF to allow get/set of bonding parameter num_grat_arp via netlink. Bonding parameter num_unsol_na is synonymous with num_grat_arp, so add only one netlink attribute to represent both bonding parameters. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 2 次提交
-
-
Add IFLA_BOND_RESEND_IGMP to allow get/set of bonding parameter resend_igmp via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_XMIT_HASH_POLICY to allow get/set of bonding parameter xmit_hash_policy via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-