driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch adds more information for reset DFX. Also, adds some
cleanups to reset info, move reset_fail_cnt into struct
hclge_rst_stats, and modifies some print formats.

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nshenjian <shenjian15@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Since hclge_get_reset_level may return HNAE3_NONE_RESET,
so hdev->reset_level can not be assigned with the return
value in the hclge_reset(), otherwise, it will cause
the use of hdev->reset_level in hclge_reset_event get
into error.

Fixes: 012fcb52 ("net: hns3: activate reset timer when calling reset_event")

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch deletes unnecessary blank line, adds {} for some
else if branchs as the first if branch has {}, for cleanup.

Feature or Bugfix:Bugfix
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: Nshenjian <shenjian15@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

In original codes, the VF index used incorrectly in function
hclge_set_vlan_rx_offload_cfg() and hclge_set_vlan_rx_offload_cfg().
When VF id is greater than 8, for example 9, it will set the
same bit with VF id 1.

This patch fixes it by using  vport->vport_id % HCLGE_VF_NUM_PER_CMD /
HCLGE_VF_NUM_PER_BYTE as the array index, intead of vport->vport_id /
HCLGE_VF_NUM_PER_CMD.

Fixes: 052ece6d ("net: hns3: add ethtool related offload command")

Feature or Bugfix:Bugfix
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

The printed data pfc_en and pfc_map need to be displayed in
hexadecimal notation, and the end of printed string needs to
be add "\n", this patch fixes them.

Feature or Bugfix:Bugfix
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

There is a redundant code assignment in hclge_main.c, this patch
fix it.

Feature or Bugfix:Bugfix
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nhuangguangbin2 <huangguangbin2@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

The variable qos in function hclge_restore_vlan_table is never used,
so this patch deletes it.

Feature or Bugfix:Bugfix
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Functions is used only in the declared file.
So we need to add a keyword static for them to Reduce coupling.
Those functions inclding as below:
hclge_func_reset_sync_vf().

This patch as a supplement to patch 26380194.
Fix tag: 26380194 (" some functions can be static ")

Feature or Bugfix:Bugfix
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch fixes some incorrect type in assignment reported by sparse.
Those sparse warning as below:
- warning : restricted __le16 degrades to integer
- warning : cast from restricted __le32
- warning : expected restricted __le32
- warning : cast from restricted __be32
- warning : cast from restricted __be16
- warning : cast to restricted __le16

Feature or Bugfix:Bugfix
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

When doing loopback test, it should set HCLGE_SWITCH_ALW_LPBK_B
intead of HCLGE_SWITCH_ALW_LCL_LPBK_B, which may cause loopback
test fail.

Feature or Bugfix:Bugfix
Signed-off-by: Nshenjian (K) <shenjian15@huawei.com>
Reviewed-by: Nhuangdaode <huangdaode@hisilicon.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch adds support for spoof check configuration for VFs.
When it is enabled, "spoof checking" is done for both mac address
and VLAN. For each VF, the HW ensures that the source MAC address
(or VLAN) of every outgoing packet exists in the MAC-list (or
VLAN-list) configured for RX filtering for that VF. If not,
the packet is dropped.

Feature or Bugfix:Bugfix
Signed-off-by: Nshenjian (K) <shenjian15@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

HNS3 driver use unsigned int to calculate the shaper parameter,
when the configured bandwidth is small, like 1M, the actual result
is 1.28M in the chip side. This bug only appears when the bandwidth
is less than 20M.

This patch plus the ir_s one more time when the calculated result
is equals to the configured bandwidth, so that can get a value
closer to the configured bandwidth.

Feature or Bugfix:Bugfix
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Some Chinese comments in kcompat.h, change them to English.

Feature or Bugfix:Bugfix
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

If the selftest and reset are performed at the same time, the loopback
setting may be still in the enable state after the reset. As a result,
packets cannot be sent out.

This patch fixes this issue by disabling loopback in hclge_mac_init.

Feature or Bugfix:Bugfix
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Functions is used only in the declared file.
So we need to add a keyword static for them to Reduce coupling.
Those functions inclding as below:
hclge_dbg_get_m7_stats_info()
hclge_reset_done()
hclge_handle_imp_error()

Feature or Bugfix:Bugfix
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded

Fix tag: fdbf549b ("add supports for arfs")

Feature or Bugfix:Bugfix
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

In function hns3_nic_bd_numa(), return type as Unsigned,
however the return value as Signed.
It would cause unexcept errors in some case.
This patch modify return statement to ensuring the return
value match.

Fix tag: d6a78e3c ("unify maybe_stop_tx for TSO and non-TSO case")

Feature or Bugfix:Bugfix
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

To be compatible with futher firmware version, use "0xFE", instead
of "0x0E", so does other macroes here.

Feature or Bugfix:Bugfix
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

According to user manual, there are several independent  parameters
for switch parameter configure command. If they are configured
in two thread concurrently, we may encounter RMW issue.

Now this command is refreshed, adding a new parameter "mask", then
we can tell firmware only to change the specified parameter without
affecting others.

This patch refactors the switch parameter configure function to
support the new command.

Feature or Bugfix:Bugfix
Signed-off-by: Nshenjian (K) <shenjian15@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

ARRAY_SIZE was defined as :
(sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)).
It would detect validity of input parameters.
So using ARRAY_SIZE() macro insteand sizeof(arr)/sizeof((arr)[0])
could improves the code readability.

Feature or Bugfix:Bugfix
Signed-off-by: Nliaoguojia <liaoguojia@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch adds the function of setting VF status independently. The
options are auto, enable, and disable. Even if the PF is down, the
communication between VFs will be normal if the VFs are set to enable.
The commands are as follows:

'ip link set <pf> vf <vf_id> state <auto|enable|disable>'
set the vf status

'ip link show'
view the setting status

Feature or Bugfix:Bugfix
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch clean the problems of static check detect problems.
Reported-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NWeiwei <dengweiwei@huawei.com>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Reviewed-by: Ngaoxun <gaoxun3@huawei.com>
Reviewed-by: NShengzui You <youshengzui@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NZhaohui Zhong <zhongzhaohui@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

add hns3 cae drivers to kernel.
Signed-off-by: NWeiwei <dengweiwei@huawei.com>
Reviewed-by: Ngaoxun <gaoxun3@huawei.com>
Reviewed-by: NShengzui You <youshengzui@huawei.com>
Reviewed-by: NZhaohui Zhong <zhongzhaohui@huawei.com>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Tested-by: Junxin Chen <chenjunxin1@huawei.com>i
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Acked-by: NHanjun Guo <guohanjun@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch adds ethtool_ops.set_channels support for HNS3 VF driver,
and updates related tqp information and RSS information, to support
modification of VF tqp number.

Feature or Bugfix:Bugfix
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

For revision 0x21, interrupt clear register is writing 0 clear
register, it means write 0 will clear the bit, write 1 make no
sence. So should just write 0 to the interrupt bit, other bits
keep 1.

For revision 0x20, this interrupt clear register is a read & write
register, for the bit has not interrupt, can not write 1, otherwise
it will be 1.

So this patch adds a compatible handler for revision 0x20.

Fixes: a8a77dda7665 ("net: hns3: fix interrupt clearing error for VF")
Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Since the mapping can be overwritten, when fail to get
the chain between vector and ring, we should go on to
deal with the remaining options. For debugging, this
patch adds log info for this failure.

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

MAC TNL interrupt is used to collect statistics info about
link status changing suddenly when netdev running.

But when stopping netdev, there also be a MAC TNL interrupt
which is unnecessary, and may add some noise to the statistics
info. So this patch disables it before stopping MAC.

Fixes: a6345787 ("net: hns3: Add handling of MAC tunnel interruption")

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Before PF asserting function reset, it should make sure that all
its VFs have been ready, otherwise, it will cause some hardware errors.

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch add the call to phy_attached_info() to the hns3 driver
to identify which exact PHY drivers and models is in use.

Feature or Bugfix:Bugfix
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Nlinyunsheng <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Some commands are not supported on DCB-unsupported ports. This patch
distinguishes these commands and does not query unsupported commands
in debugfs.

This patch also fixes an error in the dump reg pcb command in debugfs.

Feature or Bugfix:Bugfix
Signed-off-by: NYufengMo <moyufeng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Currently, the reset interrupt will be cleared firstly, so when
reset fails, if interrupt status register has reset interrupt,
it means there is a new coming reset.

Fixes: 764a6254ce5c ("net: hns3: clear reset interrupt status in hclge_irq_handle()")

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Feature or Bugfix:Bugfix
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Reviewed-by: NWeiwei Deng <dengweiwei@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

The current loopback mode is to add 0x1F to the SMAC address
as the DMAC address and enable the promiscuous mode.
However, if the VF address is the same as the DMAC address,
the loopback test fails.

Loopback can be enabled in three places: SSU, MAC, and serdes.
By default, SSU loopback is enabled, so if the SMAC and the DMAC
are the same, the packets are looped back in the SSU. If SSU loopback
is disabled, packets can reach MAC even if SMAC is the same as DMAC.

Therefore, this patch disable the SSU loopback before the loopback
test. In this way, the SMAC and DMAC can be the same, and the
promiscuous mode does not need to be enabled. And this is not
valid in version 0x20.

This patch also modifies a spelling mistake in a macro definition.

Feature or Bugfix:Bugfix
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Currently, the dump fd tcam mode in debugfs is to query all fd tcams,
including empty rules, which is unnecessary. This patch modify to
find the position of useful rules before dump fd tcam, so that it does
not need to query empty rules.

This patch also modifies some help information in debugfs.

Feature or Bugfix:Bugfix
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

When calling hclge_reset_event() within HCLGE_RESET_INTERVAL,
it returns directly now. If no one call it again, then the
error which needs a reset to fix it can not be fixed.

So this patch activates the reset timer for this case.

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch adds tx_vlan_err, tx_l4_proto_err, tx_l2l3l4_err
and tx_tso_err counter to tx process, in order to
better debug the desc filling error.

This patch also adds a missing u64_stats_update_* around
ring->stats.sw_err_cnt and adds hns3_rl_err to limit the
error printing in the IO patch.

Feature or Bugfix:Bugfix
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NWeiwei Deng <dengweiwei@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Hardware supports up to 8 tx bd for non-tso skb and 63 tx
bd for tso skb. Currently hns3 driver does not check the max
bd num that required by a skb before filling desc, which may
cause the hardware to issue a RAS error throug PCIe AER.

This patch adds the max bd num check before filling desc,
if the bd num is not within the hardware limit, it will
record the error by ring->stats.sw_err_cnt counter and
free the skb.

This patch also cleans up the hns3_nic_bd_num function by
changing the return type and removing an unnecessary check.

Feature or Bugfix:Bugfix
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NWeiwei Deng <dengweiwei@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch adds a new function hclge(vf)_reset_handshake() to deal with
the reset handshake issue.

Also rename HCLGE(VF)_NIC_CMQ_ENABLE to HCLGE(VF)_NIC_SW_RST_RDY
which represents this register bit more accurately.

Fixes: 2c00f0431bf8 ("net: hns3: fix some reset handshake issue")

Feature or Bugfix:Bugfix
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

Currently we use hclge_task_schedule() to handle link change
event when receive a link change msg. It's neccessary to remove
the HCLGE_STATE_LINK_CHANGE_REPORT_EN checking in the function
hclge_ae_stop(), because it set the HCLGE_STATE_DOWN bit at the
beginning, which will stop the hdev->service_task being scheduled.

Feature or Bugfix:Bugfix
Signed-off-by: Nshenjian (K) <shenjian15@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

driver inclusion
category: bugfix
bugzilla: NA
CVE: NA

This patch refactors the hns3_fill_desc_vtags function
by avoiding passing too many parameter, reducing indent
level and some other clean up.

This patch also add the hns3_fill_skb_desc function to
fill the first desc of a skb.

Feature or Bugfix:Bugfix
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Nlipeng <lipeng321@huawei.com>
Reviewed-by: NWeiwei Deng <dengweiwei@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>