- 17 3月, 2012 3 次提交
-
-
由 Mattias Nilsson 提交于
This patch updates the AB8500 driver to make use of the I2C read-modify-write service in the PRCMU firmware. Signed-off-by: NMattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Bengt Jonsson 提交于
This builds upon the changes done to support AB9540 so as also to support the AB8505 derivative of the AB8500 circuit. Signed-off-by: NBengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Rabin Vincent 提交于
This disadvantage of having it interruptible is that it would appear to work OK in most situations, but in the rare case that this call does fail, it can lead to misconfiguration of the AB, such as a regulator not being turned off and leading to a platform power consumption increase. There's no real benefit to having this interruptible. Make it a plain mutex_lock. The non-interruptability matches other low-level I/O functions such as SPI and I2C. Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 07 3月, 2012 4 次提交
-
-
由 Linus Walleij 提交于
The AB9540 variant of the AB8500 is basically close enough to use the same driver. This adds the new registers and deviations for this new chip variant. Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMaxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: NAlex Macro <alex.macro@stericsson.com> Signed-off-by: NMichel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Walleij 提交于
This makes the AB8500 state struct contain the IRQ mask and register offsets previously hard-coded so as to make room for more AB8500 variants. Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMaxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: NAlex Macro <alex.macro@stericsson.com> Signed-off-by: NMichel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Walleij 提交于
There are currently four different versions of the AB8500 around: AB8500, AB8505, AB9540 and AB8540. Unfortunately: - Some of the chips (AB8500, AB8505, AB9540) cannot read the AB8500_REV_REG register but return errors - Some of them have the same ID value in the hardware register AB8500_REV_REV, for example the first versions of AB8505 and AB9540 have 0xFF in this register - just like the AB8500. So we need to be able to enforce a certain version from the platform. We do this by using the id of the platform device that provides the read/write functions. Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMaxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: NAlex Macro <alex.macro@stericsson.com> Signed-off-by: NMichel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Walleij 提交于
We were not freeing the irq properly in the error path in the AB8500 driver. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMaxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: NAlex Macro <alex.macro@stericsson.com> Signed-off-by: NMichel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 09 1月, 2012 1 次提交
-
-
由 Linus Walleij 提交于
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 21 12月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Fix below build warning if CONFIG_DEBUG_FS is disabled. CC drivers/mfd/ab8500-core.o drivers/mfd/ab8500-core.c:623: warning: 'ab8500_debug_resources' defined but not used Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 24 10月, 2011 4 次提交
-
-
由 Andrew Lynn 提交于
Expose TurnOnStatus (Power key, RTC alarm, Vbus detect, etc) in sysfs. This magic value can be read by system users to determine what caused the platform to turn on last (this) time. Signed-off-by: NAndrew Lynn <andrew.lynn@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch removes the early drop version of ab8500 which have the really bad version nr 0x0. This chip should not be found in the wild and only exist as ST-Ericsson scrap equipment. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch adds support for ab8500 cut 3, MetalFix 3 or v3.3. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Virupax Sadashivpetimath 提交于
Add the missing interrupt disable hook in the irq_chip callbacks for ab8500. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NPhilippe Langlais <philippe.langlais@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 01 8月, 2011 2 次提交
-
-
由 Linus Walleij 提交于
This synchronize the subdevice entries for the AB8500 MFD driver with the latest development of subdrivers for things like battery charging and temperature monitoring. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Robert Rosengren 提交于
Internal MFD device structs are marked as __devinitdata since the kernel will allocate memory for the same when calling mfd_add_devices. Signed-off-by: NRobert Rosengren <robert.rosengren@stericsson.com> Reviewed-by: NMattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: NJohan Palsson <johan.palsson@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 27 5月, 2011 1 次提交
-
-
由 Linus Walleij 提交于
Since functionality in MFD cells may need to be adjusted according to chip revision, let's enumerate them and keep track of them. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 28 3月, 2011 1 次提交
-
-
由 Bibek Basu 提交于
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: NBibek Basu <bibek.basu@stericsson.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 27 3月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Converted with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 23 3月, 2011 2 次提交
-
-
由 Mattias Wallin 提交于
This patch adds a sysfs file with the ab8500 switch off status. The switch off status contains information of what caused the ab8500 chip to power off. A print during boot is also added. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch adds support for ab8500 chip revision cut 3.0. Also rephrased from Changes to Author in the header. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 14 1月, 2011 6 次提交
-
-
由 Mattias Wallin 提交于
This patch adds support for chip version 2.0 or cut 2.0. One new interrupt latch register - latch 12 - is introduced. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
The genirq core is being converted to supply struct irq_data to chips rather than the interrupt number. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch adds the ioresources used by subdrivers to retrieve their interrupt. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch makes the system wake up from suspend when an ab8500 interrupt occur. This can for example be USB cable insert or an RTC alarm. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch adds a file into sysfs for reading out chip id. It has been requested for modem silent reboot. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NLudovic Barre <ludovic.barre@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
We check for dev before dereferencing it. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 22 12月, 2010 1 次提交
-
-
由 Mattias Wallin 提交于
We want to find the first set bit on value, not status. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 29 10月, 2010 3 次提交
-
-
由 Mattias Wallin 提交于
This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Arun Murthy 提交于
This patch adds a Pulse Width Modulation driver for Analog Baseband Chip AB8500. Signed-off-by: NArun Murthy <arun.murthy@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Acked-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 06 9月, 2010 1 次提交
-
-
由 Sundar R Iyer 提交于
Add the PowerOn (PonKey) button support to detect power on/off events. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NSundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 11 8月, 2010 1 次提交
-
-
由 Sundar R Iyer 提交于
Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Acked-By: NMattias Wallin <mattias.wallin@stericsson.com> Acked-By: NBengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: NSundar R Iyer <sundar.iyer@stericsson.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 28 5月, 2010 1 次提交
-
-
由 Rabin Vincent 提交于
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Acked-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-