Since the start of the git history of Linux, the kernel after selecting
the worst process to be oom-killed, prefer to kill its child (if the
child does not share mm with the parent).  Later it was changed to
prefer to kill a child who is worst.  If the parent is still the worst
then the parent will be killed.

This heuristic assumes that the children did less work than their parent
and by killing one of them, the work lost will be less.  However this is
very workload dependent.  If there is a workload which can benefit from
this heuristic, can use oom_score_adj to prefer children to be killed
before the parent.

The select_bad_process() has already selected the worst process in the
system/memcg.  There is no need to recheck the badness of its children
and hoping to find a worse candidate.  That's a lot of unneeded racy
work.  Also the heuristic is dangerous because it make fork bomb like
workloads to recover much later because we constantly pick and kill
processes which are not memory hogs.  So, let's remove this whole
heuristic.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190121215850.221745-2-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Link: http://lkml.kernel.org/r/20190122152151.16139-14-gregkh@linuxfoundation.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pages which use page_type must never be mapped to userspace as it would
destroy their page type.  Add an explicit check for this instead of
assuming that kernel drivers always get this right.

Link: http://lkml.kernel.org/r/20190129053830.3749-1-willy@infradead.orgSigned-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's never appropriate to map a page allocated by SLAB into userspace.
A buggy device driver might try this, or an attacker might be able to
find a way to make it happen.

Christoph said:

: Let's just fail the code.  Currently this may work with SLUB.  But SLAB
: and SLOB overlay fields with mapcount.  So you would have a corrupted page
: struct if you mapped a slab page to user space.

Link: http://lkml.kernel.org/r/20190125173827.2658-1-willy@infradead.orgSigned-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One of the vmalloc stress test case triggers the kernel BUG():

  <snip>
  [60.562151] ------------[ cut here ]------------
  [60.562154] kernel BUG at mm/vmalloc.c:512!
  [60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI
  [60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161
  [60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  [60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390
  <snip>

it can happen due to big align request resulting in overflowing of
calculated address, i.e.  it becomes 0 after ALIGN()'s fixup.

Fix it by checking if calculated address is within vstart/vend range.

Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.comSigned-off-by: NUladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memcg has a significant number of files exposed to kernfs where their
value is either exposed directly or is "max" in the case of
PAGE_COUNTER_MAX.

This patch makes this generic by providing a single function to do this
work.  In combination with the previous patch adding
mem_cgroup_from_seq, this makes all of the seq_show feeder functions
significantly more simple.

Link: http://lkml.kernel.org/r/20190124194100.GA31425@chrisdown.nameSigned-off-by: NChris Down <chris@chrisdown.name>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the start of a series of patches similar to my earlier
DEFINE_MEMCG_MAX_OR_VAL work, but with less Macro Magic(tm).

There are a bunch of places we go from seq_file to mem_cgroup, which
currently requires manually getting the css, then getting the mem_cgroup
from the css.  It's in enough places now that having mem_cgroup_from_seq
makes sense (and also makes the next patch a bit nicer).

Link: http://lkml.kernel.org/r/20190124194050.GA31341@chrisdown.nameSigned-off-by: NChris Down <chris@chrisdown.name>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cgroup has a standardized poll/notification mechanism for waking all
pollers on all fds when a filesystem node changes.  To allow polling for
custom events, add a .poll callback that can override the default.

This is in preparation for pollable cgroup pressure files which have
per-fd trigger configurations.

Link: http://lkml.kernel.org/r/20190124211518.244221-3-surenb@google.comSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NSuren Baghdasaryan <surenb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "psi: pressure stall monitors", v3.

Android is adopting psi to detect and remedy memory pressure that
results in stuttering and decreased responsiveness on mobile devices.

Psi gives us the stall information, but because we're dealing with
latencies in the millisecond range, periodically reading the pressure
files to detect stalls in a timely fashion is not feasible.  Psi also
doesn't aggregate its averages at a high enough frequency right now.

This patch series extends the psi interface such that users can
configure sensitive latency thresholds and use poll() and friends to be
notified when these are breached.

As high-frequency aggregation is costly, it implements an aggregation
method that is optimized for fast, short-interval averaging, and makes
the aggregation frequency adaptive, such that high-frequency updates
only happen while monitored stall events are actively occurring.

With these patches applied, Android can monitor for, and ward off,
mounting memory shortages before they cause problems for the user.  For
example, using memory stall monitors in userspace low memory killer
daemon (lmkd) we can detect mounting pressure and kill less important
processes before device becomes visibly sluggish.

In our memory stress testing psi memory monitors produce roughly 10x
less false positives compared to vmpressure signals.  Having ability to
specify multiple triggers for the same psi metric allows other parts of
Android framework to monitor memory state of the device and act
accordingly.

The new interface is straightforward.  The user opens one of the
pressure files for writing and writes a trigger description into the
file descriptor that defines the stall state - some or full, and the
maximum stall time over a given window of time.  E.g.:

        /* Signal when stall time exceeds 100ms of a 1s window */
        char trigger[] = "full 100000 1000000";
        fd = open("/proc/pressure/memory");
        write(fd, trigger, sizeof(trigger));
        while (poll() >= 0) {
                ...
        }
        close(fd);

When the monitored stall state is entered, psi adapts its aggregation
frequency according to what the configured time window requires in order
to emit event signals in a timely fashion.  Once the stalling subsides,
aggregation reverts back to normal.

The trigger is associated with the open file descriptor.  To stop
monitoring, the user only needs to close the file descriptor and the
trigger is discarded.

Patches 1-4 prepare the psi code for polling support.  Patch 5
implements the adaptive polling logic, the pressure growth detection
optimized for short intervals, and hooks up write() and poll() on the
pressure files.

The patches were developed in collaboration with Johannes Weiner.

This patch (of 5):

Kernfs has a standardized poll/notification mechanism for waking all
pollers on all fds when a filesystem node changes.  To allow polling for
custom events, add a .poll callback that can override the default.

This is in preparation for pollable cgroup pressure files which have
per-fd trigger configurations.

Link: http://lkml.kernel.org/r/20190124211518.244221-2-surenb@google.comSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NSuren Baghdasaryan <surenb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compaction is inherently race-prone as a suitable page freed during
compaction can be allocated by any parallel task.  This patch uses a
capture_control structure to isolate a page immediately when it is freed
by a direct compactor in the slow path of the page allocator.  The
intent is to avoid redundant scanning.

                                     5.0.0-rc1              5.0.0-rc1
                               selective-v3r17          capture-v3r19
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      2582.11 (   0.00%)     2563.68 (   0.71%)
Amean     fault-both-5      4500.26 (   0.00%)     4233.52 (   5.93%)
Amean     fault-both-7      5819.53 (   0.00%)     6333.65 (  -8.83%)
Amean     fault-both-12     9321.18 (   0.00%)     9759.38 (  -4.70%)
Amean     fault-both-18     9782.76 (   0.00%)    10338.76 (  -5.68%)
Amean     fault-both-24    15272.81 (   0.00%)    13379.55 *  12.40%*
Amean     fault-both-30    15121.34 (   0.00%)    16158.25 (  -6.86%)
Amean     fault-both-32    18466.67 (   0.00%)    18971.21 (  -2.73%)

Latency is only moderately affected but the devil is in the details.  A
closer examination indicates that base page fault latency is reduced but
latency of huge pages is increased as it takes creater care to succeed.
Part of the "problem" is that allocation success rates are close to 100%
even when under pressure and compaction gets harder

                                5.0.0-rc1              5.0.0-rc1
                          selective-v3r17          capture-v3r19
Percentage huge-3        96.70 (   0.00%)       98.23 (   1.58%)
Percentage huge-5        96.99 (   0.00%)       95.30 (  -1.75%)
Percentage huge-7        94.19 (   0.00%)       97.24 (   3.24%)
Percentage huge-12       94.95 (   0.00%)       97.35 (   2.53%)
Percentage huge-18       96.74 (   0.00%)       97.30 (   0.58%)
Percentage huge-24       97.07 (   0.00%)       97.55 (   0.50%)
Percentage huge-30       95.69 (   0.00%)       98.50 (   2.95%)
Percentage huge-32       96.70 (   0.00%)       99.27 (   2.65%)

And scan rates are reduced as expected by 6% for the migration scanner
and 29% for the free scanner indicating that there is less redundant
work.

Compaction migrate scanned    20815362    19573286
Compaction free scanned       16352612    11510663

[mgorman@techsingularity.net: remove redundant check]
  Link: http://lkml.kernel.org/r/20190201143853.GH9565@techsingularity.net
Link: http://lkml.kernel.org/r/20190118175136.31341-23-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pageblock hints are cleared when compaction restarts or kswapd makes
enough progress that it can sleep but it's over-eager in that the bit is
cleared for migration sources with no LRU pages and migration targets
with no free pages.  As pageblock skip hint flushes are relatively rare
and out-of-band with respect to kswapd, this patch makes a few more
expensive checks to see if it's appropriate to even clear the bit.
Every pageblock that is not cleared will avoid 512 pages being scanned
unnecessarily on x86-64.

The impact is variable with different workloads showing small
differences in latency, success rates and scan rates.  This is expected
as clearing the hints is not that common but doing a small amount of
work out-of-band to avoid a large amount of work in-band later is
generally a good thing.

Link: http://lkml.kernel.org/r/20190118175136.31341-22-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Signed-off-by: NQian Cai <cai@lca.pw>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
[cai@lca.pw: no stuck in __reset_isolation_pfn()]
  Link: http://lkml.kernel.org/r/20190206034732.75687-1-cai@lca.pwSigned-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Once fast searching finishes, there is a possibility that the linear
scanner is scanning full blocks found by the fast scanner earlier.  This
patch uses an adaptive stride to sample pageblocks for free pages.  The
more consecutive full pageblocks encountered, the larger the stride
until a pageblock with free pages is found.  The scanners might meet
slightly sooner but it is an acceptable risk given that the search of
the free lists may still encounter the pages and adjust the cached PFN
of the free scanner accordingly.

                                     5.0.0-rc1              5.0.0-rc1
                              roundrobin-v3r17       samplefree-v3r17
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      2752.37 (   0.00%)     2729.95 (   0.81%)
Amean     fault-both-5      4341.69 (   0.00%)     4397.80 (  -1.29%)
Amean     fault-both-7      6308.75 (   0.00%)     6097.61 (   3.35%)
Amean     fault-both-12    10241.81 (   0.00%)     9407.15 (   8.15%)
Amean     fault-both-18    13736.09 (   0.00%)    10857.63 *  20.96%*
Amean     fault-both-24    16853.95 (   0.00%)    13323.24 *  20.95%*
Amean     fault-both-30    15862.61 (   0.00%)    17345.44 (  -9.35%)
Amean     fault-both-32    18450.85 (   0.00%)    16892.00 (   8.45%)

The latency is mildly improved offseting some overhead from earlier
patches that are prerequisites for the rest of the series.  However, a
major impact is on the free scan rate with an 82% reduction.

                                5.0.0-rc1      5.0.0-rc1
                         roundrobin-v3r17 samplefree-v3r17
Compaction migrate scanned    21607271            20116887
Compaction free scanned       95336406            16668703

It's also the first time in the series where the number of pages scanned
by the migration scanner is greater than the free scanner due to the
increased search efficiency.

Link: http://lkml.kernel.org/r/20190118175136.31341-21-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As compaction proceeds and creates high-order blocks, the free list
search gets less efficient as the larger blocks are used as compaction
targets.  Eventually, the larger blocks will be behind the migration
scanner for partially migrated pageblocks and the search fails.  This
patch round-robins what orders are searched so that larger blocks can be
ignored and find smaller blocks that can be used as migration targets.

The overall impact was small on 1-socket but it avoids corner cases
where the migration/free scanners meet prematurely or situations where
many of the pageblocks encountered by the free scanner are almost full
instead of being properly packed.  Previous testing had indicated that
without this patch there were occasional large spikes in the free
scanner without this patch.

[dan.carpenter@oracle.com: fix static checker warning]
Link: http://lkml.kernel.org/r/20190118175136.31341-20-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fast isolation of free pages allows the cached PFN of the free
scanner to advance faster than necessary depending on the contents of
the free list.  The key is that fast_isolate_freepages() can update
zone->compact_cached_free_pfn via isolate_freepages_block().  When the
fast search fails, the linear scan can start from a point that has
skipped valid migration targets, particularly pageblocks with just
low-order free pages.  This can cause the migration source/target
scanners to meet prematurely causing a reset.

This patch starts by avoiding an update of the pageblock skip
information and cached PFN from isolate_freepages_block() and puts the
responsibility of updating that information in the callers.  The fast
scanner will update the cached PFN if and only if it finds a block that
is higher than the existing cached PFN and sets the skip if the
pageblock is full or nearly full.  The linear scanner will update
skipped information and the cached PFN only when a block is completely
scanned.  The total impact is that the free scanner advances more slowly
as it is primarily driven by the linear scanner instead of the fast
search.

                                     5.0.0-rc1              5.0.0-rc1
                               noresched-v3r17         slowfree-v3r17
Amean     fault-both-3      2965.68 (   0.00%)     3036.75 (  -2.40%)
Amean     fault-both-5      3995.90 (   0.00%)     4522.24 * -13.17%*
Amean     fault-both-7      5842.12 (   0.00%)     6365.35 (  -8.96%)
Amean     fault-both-12     9550.87 (   0.00%)    10340.93 (  -8.27%)
Amean     fault-both-18    13304.72 (   0.00%)    14732.46 ( -10.73%)
Amean     fault-both-24    14618.59 (   0.00%)    16288.96 ( -11.43%)
Amean     fault-both-30    16650.96 (   0.00%)    16346.21 (   1.83%)
Amean     fault-both-32    17145.15 (   0.00%)    19317.49 ( -12.67%)

The impact to latency is higher than the last version but it appears to
be due to a slight increase in the free scan rates which is a potential
side-effect of the patch.  However, this is necessary for later patches
that are more careful about how pageblocks are treated as earlier
iterations of those patches hit corner cases where the restarts were
punishing and very visible.

Link: http://lkml.kernel.org/r/20190118175136.31341-19-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Scanning on large machines can take a considerable length of time and
eventually need to be rescheduled.  This is treated as an abort event
but that's not appropriate as the attempt is likely to be retried after
making numerous checks and taking another cycle through the page
allocator.  This patch will check the need to reschedule if necessary
but continue the scanning.

The main benefit is reduced scanning when compaction is taking a long
time or the machine is over-saturated.  It also avoids an unnecessary
exit of compaction that ends up being retried by the page allocator in
the outer loop.

                                     5.0.0-rc1              5.0.0-rc1
                              synccached-v3r16        noresched-v3r17
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      2958.27 (   0.00%)     2965.68 (  -0.25%)
Amean     fault-both-5      4091.90 (   0.00%)     3995.90 (   2.35%)
Amean     fault-both-7      5803.05 (   0.00%)     5842.12 (  -0.67%)
Amean     fault-both-12     9481.06 (   0.00%)     9550.87 (  -0.74%)
Amean     fault-both-18    14141.51 (   0.00%)    13304.72 (   5.92%)
Amean     fault-both-24    16438.00 (   0.00%)    14618.59 (  11.07%)
Amean     fault-both-30    17531.72 (   0.00%)    16650.96 (   5.02%)
Amean     fault-both-32    17101.96 (   0.00%)    17145.15 (  -0.25%)

Link: http://lkml.kernel.org/r/20190118175136.31341-18-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With incremental changes, compact_should_abort no longer makes any
documented sense.  Rename to compact_check_resched and update the
associated comments.  There is no benefit other than reducing redundant
code and making the intent slightly clearer.  It could potentially be
merged with earlier patches but it just makes the review slightly
harder.

Link: http://lkml.kernel.org/r/20190118175136.31341-17-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Migrate has separate cached PFNs for ASYNC and SYNC* migration on the
basis that some migrations will fail in ASYNC mode.  However, if the
cached PFNs match at the start of scanning and pageblocks are skipped
due to having no isolation candidates, then the sync state does not
matter.  This patch keeps matching cached PFNs in sync until a pageblock
with isolation candidates is found.

The actual benefit is marginal given that the sync scanner following the
async scanner will often skip a number of pageblocks but it's useless
work.  Any benefit depends heavily on whether the scanners restarted
recently.

Link: http://lkml.kernel.org/r/20190118175136.31341-16-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When scanning for sources or targets, PageCompound is checked for huge
pages as they can be skipped quickly but it happens relatively late
after a lot of setup and checking.  This patch short-cuts the check to
make it earlier.  It might still change when the lock is acquired but
this has less overhead overall.  The free scanner advances but the
migration scanner does not.  Typically the free scanner encounters more
movable blocks that change state over the lifetime of the system and
also tends to scan more aggressively as it's actively filling its
portion of the physical address space with data.  This could change in
the future but for the moment, this worked better in practice and
incurred fewer scan restarts.

The impact on latency and allocation success rates is marginal but the
free scan rates are reduced by 15% and system CPU usage is reduced by
3.3%.  The 2-socket results are not materially different.

Link: http://lkml.kernel.org/r/20190118175136.31341-15-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Async migration aborts on spinlock contention but contention can be high
when there are multiple compaction attempts and kswapd is active.  The
consequence is that the migration scanners move forward uselessly while
still contending on locks for longer while leaving suitable migration
sources behind.

This patch will acquire the lock but track when contention occurs.  When
it does, the current pageblock will finish as compaction may succeed for
that block and then abort.  This will have a variable impact on latency
as in some cases useless scanning is avoided (reduces latency) but a
lock will be contended (increase latency) or a single contended
pageblock is scanned that would otherwise have been skipped (increase
latency).

                                     5.0.0-rc1              5.0.0-rc1
                                norescan-v3r16    finishcontend-v3r16
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      3002.07 (   0.00%)     3153.17 (  -5.03%)
Amean     fault-both-5      4684.47 (   0.00%)     4280.52 (   8.62%)
Amean     fault-both-7      6815.54 (   0.00%)     5811.50 *  14.73%*
Amean     fault-both-12    10864.02 (   0.00%)     9276.85 (  14.61%)
Amean     fault-both-18    12247.52 (   0.00%)    11032.67 (   9.92%)
Amean     fault-both-24    15683.99 (   0.00%)    14285.70 (   8.92%)
Amean     fault-both-30    18620.02 (   0.00%)    16293.76 *  12.49%*
Amean     fault-both-32    19250.28 (   0.00%)    16721.02 *  13.14%*

                                5.0.0-rc1              5.0.0-rc1
                           norescan-v3r16    finishcontend-v3r16
Percentage huge-1         0.00 (   0.00%)        0.00 (   0.00%)
Percentage huge-3        95.00 (   0.00%)       96.82 (   1.92%)
Percentage huge-5        94.22 (   0.00%)       95.40 (   1.26%)
Percentage huge-7        92.35 (   0.00%)       95.92 (   3.86%)
Percentage huge-12       91.90 (   0.00%)       96.73 (   5.25%)
Percentage huge-18       89.58 (   0.00%)       96.77 (   8.03%)
Percentage huge-24       90.03 (   0.00%)       96.05 (   6.69%)
Percentage huge-30       89.14 (   0.00%)       96.81 (   8.60%)
Percentage huge-32       90.58 (   0.00%)       97.41 (   7.54%)

There is a variable impact that is mostly good on latency while allocation
success rates are slightly higher.  System CPU usage is reduced by about
10% but scan rate impact is mixed

Compaction migrate scanned    27997659.00    20148867
Compaction free scanned      120782791.00   118324914

Migration scan rates are reduced 28% which is expected as a pageblock is
used by the async scanner instead of skipped.  The impact on the free
scanner is known to be variable.  Overall the primary justification for
this patch is that completing scanning of a pageblock is very important
for later patches.

[yuehaibing@huawei.com: fix unused variable warning]
Link: http://lkml.kernel.org/r/20190118175136.31341-14-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pageblocks are marked for skip when no pages are isolated after a scan.
However, it's possible to hit corner cases where the migration scanner
gets stuck near the boundary between the source and target scanner.  Due
to pages being migrated in blocks of COMPACT_CLUSTER_MAX, pages that are
migrated can be reallocated before the pageblock is complete.  The
pageblock is not necessarily skipped so it can be rescanned multiple
times.  Similarly, a pageblock with some dirty/writeback pages may fail
to migrate and be rescanned until writeback completes which is wasteful.

This patch tracks if a pageblock is being rescanned.  If so, then the
entire pageblock will be migrated as one operation.  This narrows the
race window during which pages can be reallocated during migration.
Secondly, if there are pages that cannot be isolated then the pageblock
will still be fully scanned and marked for skipping.  On the second
rescan, the pageblock skip is set and the migration scanner makes
progress.

                                     5.0.0-rc1              5.0.0-rc1
                                findfree-v3r16         norescan-v3r16
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      3200.68 (   0.00%)     3002.07 (   6.21%)
Amean     fault-both-5      4847.75 (   0.00%)     4684.47 (   3.37%)
Amean     fault-both-7      6658.92 (   0.00%)     6815.54 (  -2.35%)
Amean     fault-both-12    11077.62 (   0.00%)    10864.02 (   1.93%)
Amean     fault-both-18    12403.97 (   0.00%)    12247.52 (   1.26%)
Amean     fault-both-24    15607.10 (   0.00%)    15683.99 (  -0.49%)
Amean     fault-both-30    18752.27 (   0.00%)    18620.02 (   0.71%)
Amean     fault-both-32    21207.54 (   0.00%)    19250.28 *   9.23%*

                                5.0.0-rc1              5.0.0-rc1
                           findfree-v3r16         norescan-v3r16
Percentage huge-3        96.86 (   0.00%)       95.00 (  -1.91%)
Percentage huge-5        93.72 (   0.00%)       94.22 (   0.53%)
Percentage huge-7        94.31 (   0.00%)       92.35 (  -2.08%)
Percentage huge-12       92.66 (   0.00%)       91.90 (  -0.82%)
Percentage huge-18       91.51 (   0.00%)       89.58 (  -2.11%)
Percentage huge-24       90.50 (   0.00%)       90.03 (  -0.52%)
Percentage huge-30       91.57 (   0.00%)       89.14 (  -2.65%)
Percentage huge-32       91.00 (   0.00%)       90.58 (  -0.46%)

Negligible difference but this was likely a case when the specific
corner case was not hit.  A previous run of the same patch based on an
earlier iteration of the series showed large differences where migration
rates could be halved when the corner case was hit.

The specific corner case where migration scan rates go through the roof
was due to a dirty/writeback pageblock located at the boundary of the
migration/free scanner did not happen in this case.  When it does
happen, the scan rates multipled by massive margins.

Link: http://lkml.kernel.org/r/20190118175136.31341-13-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Similar to the migration scanner, this patch uses the free lists to
quickly locate a migration target.  The search is different in that
lower orders will be searched for a suitable high PFN if necessary but
the search is still bound.  This is justified on the grounds that the
free scanner typically scans linearly much more than the migration
scanner.

If a free page is found, it is isolated and compaction continues if
enough pages were isolated.  For SYNC* scanning, the full pageblock is
scanned for any remaining free pages so that is can be marked for
skipping in the near future.

1-socket thpfioscale
                                     5.0.0-rc1              5.0.0-rc1
                                 isolmig-v3r15         findfree-v3r16
Amean     fault-both-3      3024.41 (   0.00%)     3200.68 (  -5.83%)
Amean     fault-both-5      4749.30 (   0.00%)     4847.75 (  -2.07%)
Amean     fault-both-7      6454.95 (   0.00%)     6658.92 (  -3.16%)
Amean     fault-both-12    10324.83 (   0.00%)    11077.62 (  -7.29%)
Amean     fault-both-18    12896.82 (   0.00%)    12403.97 (   3.82%)
Amean     fault-both-24    13470.60 (   0.00%)    15607.10 * -15.86%*
Amean     fault-both-30    17143.99 (   0.00%)    18752.27 (  -9.38%)
Amean     fault-both-32    17743.91 (   0.00%)    21207.54 * -19.52%*

The impact on latency is variable but the search is optimistic and
sensitive to the exact system state.  Success rates are similar but the
major impact is to the rate of scanning

                                5.0.0-rc1      5.0.0-rc1
                            isolmig-v3r15 findfree-v3r16
Compaction migrate scanned    25646769          29507205
Compaction free scanned      201558184         100359571

The free scan rates are reduced by 50%.  The 2-socket reductions for the
free scanner are more dramatic which is a likely reflection that the
machine has more memory.

[dan.carpenter@oracle.com: fix static checker warning]
[vbabka@suse.cz: correct number of pages scanned for lower orders]
Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to either a fast search of the free list or a linear scan, it is
possible for multiple compaction instances to pick the same pageblock
for migration.  This is lucky for one scanner and increased scanning for
all the others.  It also allows a race between requests on which first
allocates the resulting free block.

This patch tests and updates the pageblock skip for the migration
scanner carefully.  When isolating a block, it will check and skip if
the block is already in use.  Once the zone lock is acquired, it will be
rechecked so that only one scanner can set the pageblock skip for
exclusive use.  Any scanner contending will continue with a linear scan.
The skip bit is still set if no pages can be isolated in a range.  While
this may result in redundant scanning, it avoids unnecessarily acquiring
the zone lock when there are no suitable migration sources.

1-socket thpscale
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      3390.40 (   0.00%)     3024.41 (  10.80%)
Amean     fault-both-5      5082.28 (   0.00%)     4749.30 (   6.55%)
Amean     fault-both-7      7012.51 (   0.00%)     6454.95 (   7.95%)
Amean     fault-both-12    11346.63 (   0.00%)    10324.83 (   9.01%)
Amean     fault-both-18    15324.19 (   0.00%)    12896.82 *  15.84%*
Amean     fault-both-24    16088.50 (   0.00%)    13470.60 *  16.27%*
Amean     fault-both-30    18723.42 (   0.00%)    17143.99 (   8.44%)
Amean     fault-both-32    18612.01 (   0.00%)    17743.91 (   4.66%)

                                5.0.0-rc1              5.0.0-rc1
                            findmig-v3r15          isolmig-v3r15
Percentage huge-3        89.83 (   0.00%)       92.96 (   3.48%)
Percentage huge-5        91.96 (   0.00%)       93.26 (   1.41%)
Percentage huge-7        92.85 (   0.00%)       93.63 (   0.84%)
Percentage huge-12       92.74 (   0.00%)       92.80 (   0.07%)
Percentage huge-18       91.71 (   0.00%)       91.62 (  -0.10%)
Percentage huge-24       92.13 (   0.00%)       91.50 (  -0.69%)
Percentage huge-30       93.79 (   0.00%)       92.73 (  -1.13%)
Percentage huge-32       91.27 (   0.00%)       91.94 (   0.74%)

This shows a reasonable reduction in latency as multiple compaction
scanners do not operate on the same blocks with a similar allocation
success rate.

Compaction migrate scanned    41093126    25646769

Migration scan rates are reduced by 38%.

Link: http://lkml.kernel.org/r/20190118175136.31341-11-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The migration scanner is a linear scan of a zone with a potentiall large
search space.  Furthermore, many pageblocks are unusable such as those
filled with reserved pages or partially filled with pages that cannot
migrate.  These still get scanned in the common case of allocating a THP
and the cost accumulates.

The patch uses a partial search of the free lists to locate a migration
source candidate that is marked as MOVABLE when allocating a THP.  It
prefers picking a block with a larger number of free pages already on
the basis that there are fewer pages to migrate to free the entire
block.  The lowest PFN found during searches is tracked as the basis of
the start for the linear search after the first search of the free list
fails.  After the search, the free list is shuffled so that the next
search will not encounter the same page.  If the search fails then the
subsequent searches will be shorter and the linear scanner is used.

If this search fails, or if the request is for a small or
unmovable/reclaimable allocation then the linear scanner is still used.
It is somewhat pointless to use the list search in those cases.  Small
free pages must be used for the search and there is no guarantee that
movable pages are located within that block that are contiguous.

                                     5.0.0-rc1              5.0.0-rc1
                                 noboost-v3r10          findmig-v3r15
Amean     fault-both-3      3771.41 (   0.00%)     3390.40 (  10.10%)
Amean     fault-both-5      5409.05 (   0.00%)     5082.28 (   6.04%)
Amean     fault-both-7      7040.74 (   0.00%)     7012.51 (   0.40%)
Amean     fault-both-12    11887.35 (   0.00%)    11346.63 (   4.55%)
Amean     fault-both-18    16718.19 (   0.00%)    15324.19 (   8.34%)
Amean     fault-both-24    21157.19 (   0.00%)    16088.50 *  23.96%*
Amean     fault-both-30    21175.92 (   0.00%)    18723.42 *  11.58%*
Amean     fault-both-32    21339.03 (   0.00%)    18612.01 *  12.78%*

                                5.0.0-rc1              5.0.0-rc1
                            noboost-v3r10          findmig-v3r15
Percentage huge-3        86.50 (   0.00%)       89.83 (   3.85%)
Percentage huge-5        92.52 (   0.00%)       91.96 (  -0.61%)
Percentage huge-7        92.44 (   0.00%)       92.85 (   0.44%)
Percentage huge-12       92.98 (   0.00%)       92.74 (  -0.25%)
Percentage huge-18       91.70 (   0.00%)       91.71 (   0.02%)
Percentage huge-24       91.59 (   0.00%)       92.13 (   0.60%)
Percentage huge-30       90.14 (   0.00%)       93.79 (   4.04%)
Percentage huge-32       90.03 (   0.00%)       91.27 (   1.37%)

This shows an improvement in allocation latencies with similar
allocation success rates.  While not presented, there was a 31%
reduction in migration scanning and a 8% reduction on system CPU usage.
A 2-socket machine showed similar benefits.

[mgorman@techsingularity.net: several fixes]
  Link: http://lkml.kernel.org/r/20190204120111.GL9565@techsingularity.net
[vbabka@suse.cz: migrate block that was found-fast, some optimisations]
Link: http://lkml.kernel.org/r/20190118175136.31341-10-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <Vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When pageblocks get fragmented, watermarks are artifically boosted to
reclaim pages to avoid further fragmentation events.  However,
compaction is often either fragmentation-neutral or moving movable pages
away from unmovable/reclaimable pages.  As the true watermarks are
preserved, allow compaction to ignore the boost factor.

The expected impact is very slight as the main benefit is that
compaction is slightly more likely to succeed when the system has been
fragmented very recently.  On both 1-socket and 2-socket machines for
THP-intensive allocation during fragmentation the success rate was
increased by less than 1% which is marginal.  However, detailed tracing
indicated that failure of migration due to a premature ENOMEM triggered
by watermark checks were eliminated.

Link: http://lkml.kernel.org/r/20190118175136.31341-9-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When compaction is finishing, it uses a flag to ensure the pageblock is
complete but it makes sense to always complete migration of a pageblock.
Minimally, skip information is based on a pageblock and partially
scanned pageblocks may incur more scanning in the future.  The pageblock
skip handling also becomes more strict later in the series and the hint
is more useful if a complete pageblock was always scanned.

The potentially impacts latency as more scanning is done but it's not a
consistent win or loss as the scanning is not always a high percentage
of the pageblock and sometimes it is offset by future reductions in
scanning.  Hence, the results are not presented this time due to a
misleading mix of gains/losses without any clear pattern.  However, full
scanning of the pageblock is important for later patches.

Link: http://lkml.kernel.org/r/20190118175136.31341-8-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pages with no migration handler use a fallback handler which sometimes
works and sometimes persistently retries.  A historical example was
blockdev pages but there are others such as odd refcounting when
page->private is used.  These are retried multiple times which is
wasteful during compaction so this patch will fail migration faster
unless the caller specifies MIGRATE_SYNC.

This is not expected to help THP allocation success rates but it did
reduce latencies very slightly in some cases.

1-socket thpfioscale
                                        4.20.0                 4.20.0
                              noreserved-v2r15         failfast-v2r15
Amean     fault-both-1         0.00 (   0.00%)        0.00 *   0.00%*
Amean     fault-both-3      3839.67 (   0.00%)     3833.72 (   0.15%)
Amean     fault-both-5      5177.47 (   0.00%)     4967.15 (   4.06%)
Amean     fault-both-7      7245.03 (   0.00%)     7139.19 (   1.46%)
Amean     fault-both-12    11534.89 (   0.00%)    11326.30 (   1.81%)
Amean     fault-both-18    16241.10 (   0.00%)    16270.70 (  -0.18%)
Amean     fault-both-24    19075.91 (   0.00%)    19839.65 (  -4.00%)
Amean     fault-both-30    22712.11 (   0.00%)    21707.05 (   4.43%)
Amean     fault-both-32    21692.92 (   0.00%)    21968.16 (  -1.27%)

The 2-socket results are not materially different.  Scan rates are
similar as expected.

Link: http://lkml.kernel.org/r/20190118175136.31341-7-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's non-obvious that high-order free pages are split into order-0 pages
from the function name.  Fix it.

Link: http://lkml.kernel.org/r/20190118175136.31341-6-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A zone parameter is passed into a number of top-level compaction
functions despite the fact that it's already in compact_control.  This
is harmless but it did need an audit to check if zone actually ever
changes meaningfully.  This patches removes the parameter in a number of
top-level functions.  The change could be much deeper but this was
enough to briefly clarify the flow.

No functional change.

Link: http://lkml.kernel.org/r/20190118175136.31341-5-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last_migrated_pfn field is a bit dubious as to whether it really
helps but either way, the information from it can be inferred without
increasing the size of compact_control so remove the field.

Link: http://lkml.kernel.org/r/20190118175136.31341-4-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

compact_control spans two cache lines with write-intensive lines on
both.  Rearrange so the most write-intensive fields are in the same
cache line.  This has a negligible impact on the overall performance of
compaction and is more a tidying exercise than anything.

Link: http://lkml.kernel.org/r/20190118175136.31341-3-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Increase success rates and reduce latency of compaction", v3.

This series reduces scan rates and success rates of compaction,
primarily by using the free lists to shorten scans, better controlling
of skip information and whether multiple scanners can target the same
block and capturing pageblocks before being stolen by parallel requests.
The series is based on mmotm from January 9th, 2019 with the previous
compaction series reverted.

I'm mostly using thpscale to measure the impact of the series.  The
benchmark creates a large file, maps it, faults it, punches holes in the
mapping so that the virtual address space is fragmented and then tries
to allocate THP.  It re-executes for different numbers of threads.  From
a fragmentation perspective, the workload is relatively benign but it
does stress compaction.

The overall impact on latencies for a 1-socket machine is

				      baseline		      patches
Amean     fault-both-3      3832.09 (   0.00%)     2748.56 *  28.28%*
Amean     fault-both-5      4933.06 (   0.00%)     4255.52 (  13.73%)
Amean     fault-both-7      7017.75 (   0.00%)     6586.93 (   6.14%)
Amean     fault-both-12    11610.51 (   0.00%)     9162.34 *  21.09%*
Amean     fault-both-18    17055.85 (   0.00%)    11530.06 *  32.40%*
Amean     fault-both-24    19306.27 (   0.00%)    17956.13 (   6.99%)
Amean     fault-both-30    22516.49 (   0.00%)    15686.47 *  30.33%*
Amean     fault-both-32    23442.93 (   0.00%)    16564.83 *  29.34%*

The allocation success rates are much improved

			 	 baseline		 patches
Percentage huge-3        85.99 (   0.00%)       97.96 (  13.92%)
Percentage huge-5        88.27 (   0.00%)       96.87 (   9.74%)
Percentage huge-7        85.87 (   0.00%)       94.53 (  10.09%)
Percentage huge-12       82.38 (   0.00%)       98.44 (  19.49%)
Percentage huge-18       83.29 (   0.00%)       99.14 (  19.04%)
Percentage huge-24       81.41 (   0.00%)       97.35 (  19.57%)
Percentage huge-30       80.98 (   0.00%)       98.05 (  21.08%)
Percentage huge-32       80.53 (   0.00%)       97.06 (  20.53%)

That's a nearly perfect allocation success rate.

The biggest impact is on the scan rates

Compaction migrate scanned    55893379    19341254
Compaction free scanned      474739990    11903963

The number of pages scanned for migration was reduced by 65% and the
free scanner was reduced by 97.5%.  So much less work in exchange for
lower latency and better success rates.

The series was also evaluated using a workload that heavily fragments
memory but the benefits there are also significant, albeit not
presented.

It was commented that we should be rethinking scanning entirely and to a
large extent I agree.  However, to achieve that you need a lot of this
series in place first so it's best to make the linear scanners as best
as possible before ripping them out.

This patch (of 22):

The isolate and migrate scanners should never isolate more than a
pageblock of pages so unsigned int is sufficient saving 8 bytes on a
64-bit build.

Link: http://lkml.kernel.org/r/20190118175136.31341-2-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 'end_byte' parameter of filemap_range_has_page is required to be
inclusive, so follow the rule.

Link: http://lkml.kernel.org/r/1548678679-18122-1-git-send-email-zhengbin13@huawei.com
Fixes: 6be96d3a ("fs: return if direct I/O will trigger writeback")
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hou Tao <houtao1@huawei.com>
Cc: zhangyi (F) <yi.zhang@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GFP_KERNEL is one of the most used constant but on archs like arm with
fixed length instruction some constants are more equal than the others.
Constants with tightly packed bits can be injected directly into
instruction stream:

	   0:   e3a00d33        mov     r0, #3264       ; 0xcc0

Others require multiple instructions or even loading out of instruction
stream:

	   0:   e3a000c0        mov     r0, #192        ; 0xc0
	   4:   e3400060        movt    r0, #96		; 0x60

Shuffle GFP_* flags so that GFP_KERNEL/GFP_ATOMIC + __GFP_ZERO bits are
close to each other.

Savings on arm configs are ~0.1%.

Link: http://lkml.kernel.org/r/20190109201838.GA9140@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

swap_vma_readahead()'s comment is missing, just add it.

Link: http://lkml.kernel.org/r/1546543673-108536-2-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Hugh Dickins <hughd@google.com
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Swap readahead would read in a few pages regardless if the underlying
device is busy or not.  It may incur long waiting time if the device is
congested, and it may also exacerbate the congestion.

Use inode_read_congested() to check if the underlying device is busy or
not like what file page readahead does.  Get inode from
swap_info_struct.

Although we can add inode information in swap_address_space
(address_space->host), it may lead some unexpected side effect, i.e.  it
may break mapping_cap_account_dirty().  Using inode from
swap_info_struct seems simple and good enough.

Just does the check in vma_cluster_readahead() since
swap_vma_readahead() is just used for non-rotational device which much
less likely has congestion than traditional HDD.

Although swap slots may be consecutive on swap partition, it still may
be fragmented on swap file.  This check would help to reduce excessive
stall for such case.

The test with page_fault1 of will-it-scale (sometimes tracing may just
show runtest.py that is the wrapper script of page_fault1), which
basically launches NR_CPU threads to generate 128MB anonymous pages for
each thread, on my virtual machine with congested HDD shows long tail
latency is reduced significantly.

Without the patch
 page_fault1_thr-1490  [023]   129.311706: funcgraph_entry:      #57377.796 us |  do_swap_page();
 page_fault1_thr-1490  [023]   129.369103: funcgraph_entry:        5.642us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.369119: funcgraph_entry:      #1289.592 us |  do_swap_page();
 page_fault1_thr-1490  [023]   129.370411: funcgraph_entry:        4.957us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.370419: funcgraph_entry:        1.940us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.378847: funcgraph_entry:      #1411.385 us |  do_swap_page();
 page_fault1_thr-1490  [023]   129.380262: funcgraph_entry:        3.916us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.380275: funcgraph_entry:      #4287.751 us |  do_swap_page();

With the patch
      runtest.py-1417  [020]   301.925911: funcgraph_entry:      #9870.146 us |  do_swap_page();
      runtest.py-1417  [020]   301.935785: funcgraph_entry:        9.802us   |  do_swap_page();
      runtest.py-1417  [020]   301.935799: funcgraph_entry:        3.551us   |  do_swap_page();
      runtest.py-1417  [020]   301.935806: funcgraph_entry:        2.142us   |  do_swap_page();
      runtest.py-1417  [020]   301.935853: funcgraph_entry:        6.938us   |  do_swap_page();
      runtest.py-1417  [020]   301.935864: funcgraph_entry:        3.765us   |  do_swap_page();
      runtest.py-1417  [020]   301.935871: funcgraph_entry:        3.600us   |  do_swap_page();
      runtest.py-1417  [020]   301.935878: funcgraph_entry:        7.202us   |  do_swap_page();

[akpm@linux-foundation.org: code cleanup]
[yang.shi@linux.alibaba.com: add comment]
  Link: http://lkml.kernel.org/r/bbc7bda7-62d0-df1a-23ef-d369e865bdca@linux.alibaba.com
Link: http://lkml.kernel.org/r/1546543673-108536-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NTim Chen <tim.c.chen@intel.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Hugh Dickins <hughd@google.com
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After we establish a reference on the page, we check the pointer
continues to be in the correct position in i_pages.  Checking
page->index afterwards is unnecessary; if it were to change, then the
pointer to it from the page cache would also move.  The check used to be
done before grabbing a reference on the page which was racy (see commit
9cbb4cb2 ("mm: find_get_pages_contig fixlet")), but nobody noticed
that moving the check after grabbing the reference was redundant.

Link: http://lkml.kernel.org/r/20190107200224.13260-1-willy@infradead.orgSigned-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array.  For example:

  struct foo {
      int stuff;
      void *entry[];
  };

  instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

  instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20190104183726.GA6374@embeddedorSigned-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the current implementation, there are two places to isolate a range
of page: __offline_pages() and alloc_contig_range().  During this
procedure, it will drain pages on pcp list.

Below is a brief call flow:

  __offline_pages()/alloc_contig_range()
      start_isolate_page_range()
          set_migratetype_isolate()
              drain_all_pages()
      drain_all_pages()                 <--- A

This snippet shows the current logic is isolate and drain pcp list for
each pageblock and drain pcp list again for the whole range.

start_isolate_page_range is responsible for isolating the given pfn
range.  One part of that job is to make sure that also pages that are on
the allocator pcp lists are properly isolated.  Otherwise they could be
reused and the range wouldn't be completely isolated until the memory is
freed back.  While there is no strict guarantee here because pages might
get allocated at any time before drain_all_pages is called there doesn't
seem to be any strong demand for such a guarantee.

In any case, draining is already done at the isolation level and there
is no need to do it again later by start_isolate_page_range callers
(memory hotplug and CMA allocator currently).  Therefore remove
pointless draining in existing callers to make the code more clear and
functionally correct.

[mhocko@suse.com: provide a clearer changelog for the last two paragraphs]
Link: http://lkml.kernel.org/r/20190105233141.2329-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let arm64 subscribe to the previously added framework in which
architecture can inform whether a given huge page size is supported for
migration.  This just overrides the default function
arch_hugetlb_migration_supported() and enables migration for all
possible HugeTLB page sizes on arm64.

With this, HugeTLB migration support on arm64 now covers all possible
HugeTLB options.

          CONT PTE    PMD    CONT PMD    PUD
          --------    ---    --------    ---
  4K:        64K      2M        32M      1G
  16K:        2M     32M         1G
  64K:        2M    512M        16G

Link: http://lkml.kernel.org/r/1545121450-1663-6-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NSteve Capper <steve.capper@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let arm64 subscribe to generic HugeTLB page migration framework.  Right
now this only works on the following PMD and PUD level HugeTLB page
sizes with various kernel base page size combinations.

         CONT PTE    PMD    CONT PMD    PUD
         --------    ---    --------    ---
  4K:         NA     2M         NA      1G
  16K:        NA    32M         NA
  64K:        NA   512M         NA

Link: http://lkml.kernel.org/r/1545121450-1663-5-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NSteve Capper <steve.capper@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>