- 03 3月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
So far, the hda_codec object kept the hda_pcm list in an array, and the codec driver was expected to assign the array. However, this makes the object life cycle management harder, because the assigned array is freed at the codec driver detach while it might be still accessed by the opened streams. In this patch, we allocate each hda_pcm object dynamically and manage it as a linked list. Each object has a kref refcount, and both the codec driver binder and the PCM open/close touches it, so that the object won't be freed while in use. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 2月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Use dev_err() and co for messages from HD-audio controller and codec drivers. The codec drivers are mostly bound with codec objects, so some helper macros, codec_err(), codec_info(), etc, are provided. They merely wrap the corresponding dev_xxx(). There are a few places still calling snd_printk() and its variants as they are called without the codec or device context. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 02 5月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 12月, 2009 1 次提交
-
-
由 Jaroslav Kysela 提交于
This set of changes add missing NID values to some static control elemenents. Also, it handles all "Capture Source" or "Input Source" controls. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 27 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Split the monolithc HD-audio driver into several pieces: - snd-hda-intel HD-audio PCI controller driver; loaded via udev - snd-hda-codec HD-audio codec bus driver - snd-hda-codec-* Specific HD-audio codec drivers When built as modules, snd-hda-codec (that is invoked by snd-hda-intel) looks up the codec vendor ID and loads the corresponding codec module automatically via request_module(). When built in a kernel, each codec drivers are statically hooked up before probing the PCI. This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module information for each driver, and driver-linking codes between codec-bus and codec drivers. TODO: - Avoid EXPORT_SYMBOL*() when built-in kernel - Restore __devinit appropriately depending on the condition Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2008 2 次提交
-
-
由 Harvey Harrison 提交于
Move the array declaration to hda_codec.c where it is used and add includes where the individual presets are declared. Fixes the following sparse warnings: sound/pci/hda/patch_realtek.c:13744:25: warning: symbol 'snd_hda_preset_realtek' was not declared. Should it be static? sound/pci/hda/patch_cmedia.c:729:25: warning: symbol 'snd_hda_preset_cmedia' was not declared. Should it be static? sound/pci/hda/patch_analog.c:3656:25: warning: symbol 'snd_hda_preset_analog' was not declared. Should it be static? sound/pci/hda/patch_sigmatel.c:3995:25: warning: symbol 'snd_hda_preset_sigmatel' was not declared. Should it be static? sound/pci/hda/patch_si3054.c:286:25: warning: symbol 'snd_hda_preset_si3054' was not declared. Should it be static? sound/pci/hda/patch_atihdmi.c:156:25: warning: symbol 'snd_hda_preset_atihdmi' was not declared. Should it be static? sound/pci/hda/patch_conexant.c:1721:25: warning: symbol 'snd_hda_preset_conexant' was not declared. Should it be static? sound/pci/hda/patch_via.c:1962:25: warning: symbol 'snd_hda_preset_via' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the current scheme, PCM device numbers are assigned incrementally in the order of codecs. This causes problems when the codec number is irregular, e.g. codec #0 for HDMI and codec #1 for analog. Then the HDMI becomes the first PCM, which is picked up as the default output device. Unfortuantely this doesn't work well with normal setups. This patch introduced the fixed device numbers for the PCM types, namely, analog, SPDIF, HDMI and modem. The PCM devices are assigned according to the corresponding PCM type. After this patch, HDMI will be always assigned to PCM #3, SPDIF to PCM #1, and the first analog to PCM #0, etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 2 次提交
-
-
由 Vasily Khoruzhick 提交于
Codec with id 11c1:1040 sitting on hda bus isn't si3054-compatible. It should be removed from patch_si3054.c id list. The detailed information http://archives.linmodems.org/26457 From: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 2 次提交
-
-
由 Takashi Iwai 提交于
So far, the driver looked the table of snd_kcontrol_new used for creating mixer elements and forces to call each of its put callbacks in PM resume code. This is too ugly and hackish. Now, the resume is simplified using the codec amp and command register caches. The driver simply restores the values that have been written in the cache table. With this simplification, most codec support codes don't require any special resume callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 20 7月, 2007 2 次提交
-
-
由 Claudio Matsuoka 提交于
Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Add VIA HDA identification to use the HDA-based Motorola modem of the Clevo m540 laptop. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 31 5月, 2007 1 次提交
-
-
由 Christian Rothlaender 提交于
This patch adds support for the ASUS A8J Series 56k Modem (Motorola SM56) Signed-off-by: NChristian Rothlaender <christian@rothlaender.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 03 5月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 12月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Some modem codec seem to fail in the initialization, and this stopped loading of the whole module although the audio is OK. Since it's usually a non-fatal issue, the driver tries to proceed to initialize now. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 07 10月, 2006 1 次提交
-
-
由 Sasha Khapyorsky 提交于
There are additional IDs for Si3054 codec based HDA modems. Most of them were discovered on discuss@linmodems.org list - Thanks to MarvS and all linmodems.org folks. Signed-off-by: NSasha Khapyorsky <sashak@alsa-project.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 9月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Added the device id for Motorola si3054-compatible modem codec on a Gateway laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 01 2月, 2006 1 次提交
-
-
由 Sasha Khapyorsky 提交于
Modules: HDA Codec driver This adds support for Agere's variant of Si3054/5 based HDA modem. Signed-off-by: NSasha Khapyorsky <sashak@alsa-project.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 1月, 2006 2 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver Remove xxx_t typedefs from the HD-Audio codec support codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mueller 提交于
Modules: HDA Codec driver The patch fixes the problem of mute onboard HDA sound output, buildin V.92 modem idendification and functionality. Signed-off-by: NDaniel Mueller <daniel.mueller@siemens.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 11月, 2005 1 次提交
-
-
由 Sasha Khapyorsky 提交于
Modules: Intel8x0-modem driver,VIA82xx-modem driver,HDA Codec driver Signed-off-by: NSasha Khapyorsky <sashakh@alsa-project.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 12 9月, 2005 2 次提交
-
-
由 Takashi Iwai 提交于
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver,HDA Intel driver,HDA generic driver Assign audio PCMs first before modem PCMs. The modem stream is assigned up to device #6, to be consistent over different models. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 8月, 2005 1 次提交
-
-
由 Sasha Khapyorsky 提交于
HDA generic driver,HDA Codec driver Support for Si3054/5 HDA modem codecs. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-