- 10 3月, 2013 9 次提交
-
-
由 Joel A Fernandes 提交于
After DMA is complete, the omap_aes_finish_req function is called as a part of the done_task tasklet. During this its atomic and any calls to pm functions should not assume they wont sleep. The patch replaces a call to pm_runtime_put_sync (which can sleep) with pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during AES operation. Tested on an AM33xx SoC device (beaglebone board). To reproduce the problem, I used the tcrypt kernel module as: modprobe tcrypt sec=2 mode=500 Signed-off-by: NJoel A Fernandes <joelagnel@ti.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: NMark A. Greer <mgreer@animalcreek.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Joel A Fernandes 提交于
After DMA is complete, the omap_sham_finish_req function is called as a part of the done_task tasklet. During this its atomic and any calls to pm functions should not assume they wont sleep. The patch replaces a call to pm_runtime_put_sync (which can sleep) with pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during SHA operation. Tested on an AM33xx SoC device (beaglebone board). To reproduce the problem, used the tcrypt kernel module as: modprobe tcrypt sec=2 mode=403 Signed-off-by: NJoel A Fernandes <joelagnel@ti.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: NMark A. Greer <mgreer@animalcreek.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Syam Sidhardhan 提交于
If we define dev_dbg(), then there is a possible NULL pointer dereference. Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Mathias Krause 提交于
There is no need to modify the netlink dispatch table at runtime and making it const even makes the resulting object file slightly smaller. Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tim Chen 提交于
crypto: crc32c - Update the links to the white papers on CRC32C calculations with PCLMULQDQ instructions. Herbert, The following patch update the stale link to the CRC32C white paper that was referenced. Tim Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Royer 提交于
Updates from IP release 0x320 to 0x400: - add DMA support (previous IP revision use PDC) - add DMA double input buffer support - add SHA224 support Update from IP release 0x400 to 0x410: - add SHA384 and SHA512 support Signed-off-by: NNicolas Royer <nicolas@eukrea.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NEric Bénard <eric@eukrea.com> Tested-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Royer 提交于
Update from previous IP release (0x600): - add DMA support (previous IP release use PDC) Signed-off-by: NNicolas Royer <nicolas@eukrea.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NEric Bénard <eric@eukrea.com> Tested-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Royer 提交于
Updates from previous IP release (0x120): - add cfb64 support - add DMA double input buffer support Signed-off-by: NNicolas Royer <nicolas@eukrea.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NEric Bénard <eric@eukrea.com> Tested-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Nicolas Royer 提交于
Only AES use DMA in AT91SAM9G45 (TDES and SHA use PDC). However latest Atmel TDES and SHA IP releases use DMA instead of PDC. --> Atmel TDES and SHA drivers need DMA platform data for those IP releases. Goal of this patch is to use the same platform data structure for all Atmel crypto peripherals. This structure contains information about DMA interface. Signed-off-by: NNicolas Royer <nicolas@eukrea.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NEric Bénard <eric@eukrea.com> Tested-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 26 2月, 2013 7 次提交
-
-
由 Herbert Xu 提交于
This bool option can never be set to anything other than y. So let's just kill it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto update from Herbert Xu: "Here is the crypto update for 3.9: - Added accelerated implementation of crc32 using pclmulqdq. - Added test vector for fcrypt. - Added support for OMAP4/AM33XX cipher and hash. - Fixed loose crypto_user input checks. - Misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (43 commits) crypto: user - ensure user supplied strings are nul-terminated crypto: user - fix empty string test in report API crypto: user - fix info leaks in report API crypto: caam - Added property fsl,sec-era in SEC4.0 device tree binding. crypto: use ERR_CAST crypto: atmel-aes - adjust duplicate test crypto: crc32-pclmul - Kill warning on x86-32 crypto: x86/twofish - assembler clean-ups: use ENTRY/ENDPROC, localize jump labels crypto: x86/sha1 - assembler clean-ups: use ENTRY/ENDPROC crypto: x86/serpent - use ENTRY/ENDPROC for assember functions and localize jump targets crypto: x86/salsa20 - assembler cleanup, use ENTRY/ENDPROC for assember functions and rename ECRYPT_* to salsa20_* crypto: x86/ghash - assembler clean-up: use ENDPROC at end of assember functions crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC crypto: cast6-avx: use ENTRY()/ENDPROC() for assembler functions crypto: cast5-avx: use ENTRY()/ENDPROC() for assembler functions and localize jump targets crypto: camellia-x86_64/aes-ni: use ENTRY()/ENDPROC() for assembler functions and localize jump targets crypto: blowfish-x86_64: use ENTRY()/ENDPROC() for assembler functions and localize jump targets crypto: aesni-intel - add ENDPROC statements for assembler functions crypto: x86/aes - assembler clean-ups: use ENTRY/ENDPROC, localize jump targets crypto: testmgr - add test vector for fcrypt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 update from Tony Luck: "ia64 vm patch series that was cooking in -mm tree" * tag 'please-pull-vm_unwrapped' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: mm: use vm_unmapped_area() in hugetlbfs on ia64 architecture mm: use vm_unmapped_area() on ia64 architecture
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security subsystem fixes from James Morris: "From Mimi: Both of these patches are bug fixes for patches, which were upstreamed in this open window. The first patch addresses a merge issue. The second patch addresses a CONFIG_BLOCK dependency." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: block: fix part_pack_uuid() build error ima: "remove enforce checking duplication" merge fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest由 Linus Torvalds 提交于
Pull ktest update from Steven Rostedt: "Added ability to have all builds test warnings. Fixed failing reboot when the reboot produces a non fatal error. Config reading fixes and other cleanups" * tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Remove indexes from warnings check ktest: Ignore warnings during reboot ktest: Search for linux banner for successful reboot ktest: Add make_warnings_file and process full warnings ktest: Allow a test option to use its default option ktest: Strip off '\n' when reading which files were modified ktest: Do not require CONSOLE for build or install bisects
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
-
由 Mimi Zohar 提交于
Commit "85865c1f ima: add policy support for file system uuid" introduced a CONFIG_BLOCK dependency. This patch defines a wrapper called blk_part_pack_uuid(), which returns -EINVAL, when CONFIG_BLOCK is not defined. security/integrity/ima/ima_policy.c:538:4: error: implicit declaration of function 'part_pack_uuid' [-Werror=implicit-function-declaration] Changelog v2: - Reference commit number in patch description Changelog v1: - rename ima_part_pack_uuid() to blk_part_pack_uuid() - resolve scripts/checkpatch.pl warnings Changelog v0: - fix UUID scripts/Lindent msgs Reported-by: NRandy Dunlap <rdunlap@infradead.org> Reported-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
- 25 2月, 2013 7 次提交
-
-
由 Mimi Zohar 提交于
Commit "750943a3 ima: remove enforce checking duplication" combined the 'in IMA policy' and 'enforcing file integrity' checks. For the non-file, kernel module verification, a specific check for 'enforcing file integrity' was not added. This patch adds the check. Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media updates from Mauro Carvalho Chehab: - Some cleanups at V4L2 documentation - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor, sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging driver - Lots of missing MAINTAINERS entries added - several em28xx driver improvements, including its conversion to videobuf2 - several fixups on drivers to make them to better comply with the API - DVB core: add support for DVBv5 stats, allowing the implementation of statistics for new standards like ISDB - mb86a20s: add statistics to the driver - lots of new board additions, cleanups, and driver improvements. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits) [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff) [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F [media] em28xx: add usb id for terratec h5 rev. 3 [media] media: rc: gpio-ir-recv: add support for device tree parsing [media] mceusb: move check earlier to make smatch happy [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa [media] staging: media: Remove unnecessary OOM messages [media] sh_vou: Use vou_dev instead of vou_file wherever possible [media] sh_vou: Use video_drvdata() [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions [media] mt9t112: mt9t111 format set up differs from mt9t112 [media] sh-mobile-ceu-camera: fix SHARPNESS control default Revert "[media] fc0011: Return early, if the frequency is already tuned" [media] cx18/ivtv: fix regression: remove __init from a non-init function [media] em28xx: fix analog streaming with USB bulk transfers [media] stv0900: remove unnecessary null pointer check [media] fc0011: Return early, if the frequency is already tuned [media] fc0011: Add some sanity checks and cleanups [media] fc0011: Fix xin value clamping Revert "[media] [PATH,1/2] mxl5007 move reset to attach" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
Pull libata updates from Jeff Garzik: 1) apply, and then revert, the sysfs export of ATA host controller number. Discussion was continuing after patch application, trying to figure out how to best mesh exported data with the installers, boot-time agents and other parties that want this info. 2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing the wonderfulness of sane power management to your CD/DVD device. Includes one SCSI-subsystem patch (with appropriate ACKs), adding runtime PM support to 'sr' driver. That is the ZPODD interaction bits. Patchset went through some 13 revisions before it got here; kudos to Intel for persistence. 3) pata_samsung_cf: use devm_clk_get() 4) more ata_piix, ahci PCI IDs 5) Add SATA driver for R-Car SoC 6) Convert libata to use devm_ioremap_resource (Note: I think Greg sent this to you, also) 7) Set proper Sense Key (SK) in the SCSI simulator when ATA passthrough indicates check condition. Google and specification hawks everywhere shall rejoice. * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (22 commits) [libata] fix smatch warning for zpodd_wake_dev [libata] Set proper SK when CK_COND is set. [libata] Convert to devm_ioremap_resource() libata: add R-Car SATA driver ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add Device IDs for Intel Wellsburg PCH [SCSI] remove can_power_off flag from scsi_device [libata] scsi: no poll when ODD is powered off [SCSI] sr: support runtime pm ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs [libata] PM code cleanup for ata port [libata] pm: differentiate system and runtime pm for ata port Revert "libata: export host controller number thru /sys" libata: do not suspend port if normal ODD is attached libata: expose pm qos flags for ata device libata: handle power transition of ODD libata: check zero power ready status for ZPODD libata: move acpi notification code to zpodd libata: identify and init ZPODD devices ...
-
由 Nicolas Pitre 提交于
Commit 81732c3b ("tty vt: Fix line garbage in virtual console on command line edition") broke insert_char() in multiple ways. Then commit b1a925f4 ("tty vt: Fix a regression in command line edition") partially fixed it. However, the buffer being moved is still too large and overflowing beyond the end of the current line, corrupting existing characters on the next line. Example test case: echo -e "abc\nde\x1b[A\x1b[4h \x1b[4l\x1b[B" Expected result: ab c de Current result: ab c e Needless to say that this is very annoying when inserting words in the middle of paragraphs with certain text editors. Signed-off-by: NNicolas Pitre <nico@linaro.org> Cc: Jean-François Moine <moinejf@free.fr> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "This has two new ACPI drivers for Xen - a physical CPU offline/online and a memory hotplug. The way this works is that ACPI kicks the drivers and they make the appropiate hypercall to the hypervisor to tell it that there is a new CPU or memory. There also some changes to the Xen ARM ABIs and couple of fixes. One particularly nasty bug in the Xen PV spinlock code was fixed by Stefan Bader - and has been there since the 2.6.32! Features: - Xen ACPI memory and CPU hotplug drivers - allowing Xen hypervisor to be aware of new CPU and new DIMMs - Cleanups Bug-fixes: - Fixes a long-standing bug in the PV spinlock wherein we did not kick VCPUs that were in a tight loop. - Fixes in the error paths for the event channel machinery" Fix up a few semantic conflicts with the ACPI interface changes in drivers/xen/xen-acpi-{cpu,mem}hotplug.c. * tag 'stable/for-linus-3.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: event channel arrays are xen_ulong_t and not unsigned long xen: Send spinlock IPI to all waiters xen: introduce xen_remap, use it instead of ioremap xen: close evtchn port if binding to irq fails xen-evtchn: correct comment and error output xen/tmem: Add missing %s in the printk statement. xen/acpi: move xen_acpi_get_pxm under CONFIG_XEN_DOM0 xen/acpi: ACPI cpu hotplug xen/acpi: Move xen_acpi_get_pxm to Xen's acpi.h xen/stub: driver for CPU hotplug xen/acpi: ACPI memory hotplug xen/stub: driver for memory hotplug xen: implement updated XENMEM_add_to_physmap_range ABI xen/smp: Move the common CPU init code a bit to prep for PVH patch.
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM updates from Marcelo Tosatti: "KVM updates for the 3.9 merge window, including x86 real mode emulation fixes, stronger memory slot interface restrictions, mmu_lock spinlock hold time reduction, improved handling of large page faults on shadow, initial APICv HW acceleration support, s390 channel IO based virtio, amongst others" * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) Revert "KVM: MMU: lazily drop large spte" x86: pvclock kvm: align allocation size to page size KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr x86 emulator: fix parity calculation for AAD instruction KVM: PPC: BookE: Handle alignment interrupts booke: Added DBCR4 SPR number KVM: PPC: booke: Allow multiple exception types KVM: PPC: booke: use vcpu reference from thread_struct KVM: Remove user_alloc from struct kvm_memory_slot KVM: VMX: disable apicv by default KVM: s390: Fix handling of iscs. KVM: MMU: cleanup __direct_map KVM: MMU: remove pt_access in mmu_set_spte KVM: MMU: cleanup mapping-level KVM: MMU: lazily drop large spte KVM: VMX: cleanup vmx_set_cr0(). KVM: VMX: add missing exit names to VMX_EXIT_REASONS array KVM: VMX: disable SMEP feature when guest is in non-paging mode KVM: Remove duplicate text in api.txt Revert "KVM: MMU: split kvm_mmu_free_page" ...
-
- 24 2月, 2013 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal由 Linus Torvalds 提交于
Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
-
由 Linus Torvalds 提交于
Merge second patch-bomb from Andrew Morton: - A little DM fix - the MM queue * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (154 commits) ksm: allocate roots when needed mm: cleanup "swapcache" in do_swap_page mm,ksm: swapoff might need to copy mm,ksm: FOLL_MIGRATION do migration_entry_wait ksm: shrink 32-bit rmap_item back to 32 bytes ksm: treat unstable nid like in stable tree ksm: add some comments tmpfs: fix mempolicy object leaks tmpfs: fix use-after-free of mempolicy object mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages mm: export mmu notifier invalidates mm: accelerate mm_populate() treatment of THP pages mm: use long type for page counts in mm_populate() and get_user_pages() mm: accurately document nr_free_*_pages functions with code comments HWPOISON: change order of error_states[]'s elements HWPOISON: fix misjudgement of page_action() for errors on mlocked pages memcg: stop warning on memcg_propagate_kmem net: change type of virtio_chan->p9_max_pages vmscan: change type of vm_total_pages to unsigned long fs/nfsd: change type of max_delegations, nfsd_drc_max_mem and nfsd_drc_mem_used ...
-
由 Hugh Dickins 提交于
It is a pity to have MAX_NUMNODES+MAX_NUMNODES tree roots statically allocated, particularly when very few users will ever actually tune merge_across_nodes 0 to use more than 1+1 of those trees. Not a big deal (only 16kB wasted on each machine with CONFIG_MAXSMP), but a pity. Start off with 1+1 statically allocated, then if merge_across_nodes is ever tuned, allocate for nr_node_ids+nr_node_ids. Do not attempt to free up the extra if it's tuned back, that would be a waste of effort. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
I dislike the way in which "swapcache" gets used in do_swap_page(): there is always a page from swapcache there (even if maybe uncached by the time we lock it), but tests are made according to "swapcache". Rework that with "page != swapcache", as has been done in unuse_pte(). Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Before establishing that KSM page migration was the cause of my WARN_ON_ONCE(page_mapped(page))s, I suspected that they came from the lack of a ksm_might_need_to_copy() in swapoff's unuse_pte() - which in many respects is equivalent to faulting in a page. In fact I've never caught that as the cause: but in theory it does at least need the KSM_RUN_UNMERGE check in ksm_might_need_to_copy(), to avoid bringing a KSM page back in when it's not supposed to be. I intended to copy how it's done in do_swap_page(), but have a strong aversion to how "swapcache" ends up being used there: rework it with "page != swapcache". Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
In "ksm: remove old stable nodes more thoroughly" I said that I'd never seen its WARN_ON_ONCE(page_mapped(page)). True at the time of writing, but it soon appeared once I tried fuller tests on the whole series. It turned out to be due to the KSM page migration itself: unmerge_and_ remove_all_rmap_items() failed to locate and replace all the KSM pages, because of that hiatus in page migration when old pte has been replaced by migration entry, but not yet by new pte. follow_page() finds no page at that instant, but a KSM page reappears shortly after, without a fault. Add FOLL_MIGRATION flag, so follow_page() can do migration_entry_wait() for KSM's break_cow(). I'd have preferred to avoid another flag, and do it every time, in case someone else makes the same easy mistake; but did not find another transgressor (the common get_user_pages() is of course safe), and cannot be sure that every follow_page() caller is prepared to sleep - ia64's xencomm_vtop()? Now, THP's wait_split_huge_page() can already sleep there, since anon_vma locking was changed to mutex, but maybe that's somehow excluded. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Think of struct rmap_item as an extension of struct page (restricted to MADV_MERGEABLE areas): there may be a lot of them, we need to keep them small, especially on 32-bit architectures of limited lowmem. Siting "int nid" after "unsigned int checksum" works nicely on 64-bit, making no change to its 64-byte struct rmap_item; but bloats the 32-bit struct rmap_item from (nicely cache-aligned) 32 bytes to 36 bytes, which rounds up to 40 bytes once allocated from slab. We'd better avoid that. Hey, I only just remembered that the anon_vma pointer in struct rmap_item has no purpose until the rmap_item is hung from a stable tree node (which has its own nid field); and rmap_item's nid field no purpose than to say which tree root to tell rb_erase() when unlinking from an unstable tree. Double them up in a union. There's just one place where we set anon_vma early (when we already hold mmap_sem): now we must remove tree_rmap_item from its unstable tree there, before overwriting nid. No need to spatter BUG()s around: we'd be seeing oopses if this were wrong. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
An inconsistency emerged in reviewing the NUMA node changes to KSM: when meeting a page from the wrong NUMA node in a stable tree, we say that it's okay for comparisons, but not as a leaf for merging; whereas when meeting a page from the wrong NUMA node in an unstable tree, we bail out immediately. Now, it might be that a wrong NUMA node in an unstable tree is more likely to correlate with instablility (different content, with rbnode now misplaced) than page migration; but even so, we are accustomed to instablility in the unstable tree. Without strong evidence for which strategy is generally better, I'd rather be consistent with what's done in the stable tree: accept a page from the wrong NUMA node for comparison, but not as a leaf for merging. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Added slightly more detail to the Documentation of merge_across_nodes, a few comments in areas indicated by review, and renamed get_ksm_page()'s argument from "locked" to "lock_it". No functional change. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Thelen 提交于
Fix several mempolicy leaks in the tmpfs mount logic. These leaks are slow - on the order of one object leaked per mount attempt. Leak 1 (umount doesn't free mpol allocated in mount): while true; do mount -t tmpfs -o mpol=interleave,size=100M nodev /mnt umount /mnt done Leak 2 (errors parsing remount options will leak mpol): mount -t tmpfs -o size=100M nodev /mnt while true; do mount -o remount,mpol=interleave,size=x /mnt 2> /dev/null done umount /mnt Leak 3 (multiple mpol per mount leak mpol): while true; do mount -t tmpfs -o mpol=interleave,mpol=interleave,size=100M nodev /mnt umount /mnt done This patch fixes all of the above. I could have broken the patch into three pieces but is seemed easier to review as one. [akpm@linux-foundation.org: fix handling of mpol_parse_str() errors, per Hugh] Signed-off-by: NGreg Thelen <gthelen@google.com> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Thelen 提交于
The tmpfs remount logic preserves filesystem mempolicy if the mpol=M option is not specified in the remount request. A new policy can be specified if mpol=M is given. Before this patch remounting an mpol bound tmpfs without specifying mpol= mount option in the remount request would set the filesystem's mempolicy object to a freed mempolicy object. To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run: # mkdir /tmp/x # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0 # mount -o remount,size=200M nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0 # note ? garbage in mpol=... output above # dd if=/dev/zero of=/tmp/x/f count=1 # panic here Panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Oops: 0010 [#1] SMP DEBUG_PAGEALLOC Call Trace: mpol_shared_policy_init+0xa5/0x160 shmem_get_inode+0x209/0x270 shmem_mknod+0x3e/0xf0 shmem_create+0x18/0x20 vfs_create+0xb5/0x130 do_last+0x9a1/0xea0 path_openat+0xb3/0x4d0 do_filp_open+0x42/0xa0 do_sys_open+0xfe/0x1e0 compat_sys_open+0x1b/0x20 cstar_dispatch+0x7/0x1f Non-debug kernels will not crash immediately because referencing the dangling mpol will not cause a fault. Instead the filesystem will reference a freed mempolicy object, which will cause unpredictable behavior. The problem boils down to a dropped mpol reference below if shmem_parse_options() does not allocate a new mpol: config = *sbinfo shmem_parse_options(data, &config, true) mpol_put(sbinfo->mpol) sbinfo->mpol = config.mpol /* BUG: saves unreferenced mpol */ This patch avoids the crash by not releasing the mempolicy if shmem_parse_options() doesn't create a new mpol. How far back does this issue go? I see it in both 2.6.36 and 3.3. I did not look back further. Signed-off-by: NGreg Thelen <gthelen@google.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Rob van der Heij reported the following (paraphrased) on private mail. The scenario is that I want to avoid backups to fill up the page cache and purge stuff that is more likely to be used again (this is with s390x Linux on z/VM, so I don't give it as much memory that we don't care anymore). So I have something with LD_PRELOAD that intercepts the close() call (from tar, in this case) and issues a posix_fadvise() just before closing the file. This mostly works, except for small files (less than 14 pages) that remains in page cache after the face. Unfortunately Rob has not had a chance to test this exact patch but the test program below should be reproducing the problem he described. The issue is the per-cpu pagevecs for LRU additions. If the pages are added by one CPU but fadvise() is called on another then the pages remain resident as the invalidate_mapping_pages() only drains the local pagevecs via its call to pagevec_release(). The user-visible effect is that a program that uses fadvise() properly is not obeyed. A possible fix for this is to put the necessary smarts into invalidate_mapping_pages() to globally drain the LRU pagevecs if a pagevec page could not be discarded. The downside with this is that an inode cache shrink would send a global IPI and memory pressure potentially causing global IPI storms is very undesirable. Instead, this patch adds a check during fadvise(POSIX_FADV_DONTNEED) to check if invalidate_mapping_pages() discarded all the requested pages. If a subset of pages are discarded it drains the LRU pagevecs and tries again. If the second attempt fails, it assumes it is due to the pages being mapped, locked or dirty and does not care. With this patch, an application using fadvise() correctly will be obeyed but there is a downside that a malicious application can force the kernel to send global IPIs and increase overhead. If accepted, I would like this to be considered as a -stable candidate. It's not an urgent issue but it's a system call that is not working as advertised which is weak. The following test program demonstrates the problem. It should never report that pages are still resident but will without this patch. It assumes that CPU 0 and 1 exist. int main() { int fd; int pagesize = getpagesize(); ssize_t written = 0, expected; char *buf; unsigned char *vec; int resident, i; cpu_set_t set; /* Prepare a buffer for writing */ expected = FILESIZE_PAGES * pagesize; buf = malloc(expected + 1); if (buf == NULL) { printf("ENOMEM\n"); exit(EXIT_FAILURE); } buf[expected] = 0; memset(buf, 'a', expected); /* Prepare the mincore vec */ vec = malloc(FILESIZE_PAGES); if (vec == NULL) { printf("ENOMEM\n"); exit(EXIT_FAILURE); } /* Bind ourselves to CPU 0 */ CPU_ZERO(&set); CPU_SET(0, &set); if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) { perror("sched_setaffinity"); exit(EXIT_FAILURE); } /* open file, unlink and write buffer */ fd = open("fadvise-test-file", O_CREAT|O_EXCL|O_RDWR); if (fd == -1) { perror("open"); exit(EXIT_FAILURE); } unlink("fadvise-test-file"); while (written < expected) { ssize_t this_write; this_write = write(fd, buf + written, expected - written); if (this_write == -1) { perror("write"); exit(EXIT_FAILURE); } written += this_write; } free(buf); /* * Force ourselves to another CPU. If fadvise only flushes the local * CPUs pagevecs then the fadvise will fail to discard all file pages */ CPU_ZERO(&set); CPU_SET(1, &set); if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) { perror("sched_setaffinity"); exit(EXIT_FAILURE); } /* sync and fadvise to discard the page cache */ fsync(fd); if (posix_fadvise(fd, 0, expected, POSIX_FADV_DONTNEED) == -1) { perror("posix_fadvise"); exit(EXIT_FAILURE); } /* map the file and use mincore to see which parts of it are resident */ buf = mmap(NULL, expected, PROT_READ, MAP_SHARED, fd, 0); if (buf == NULL) { perror("mmap"); exit(EXIT_FAILURE); } if (mincore(buf, expected, vec) == -1) { perror("mincore"); exit(EXIT_FAILURE); } /* Check residency */ for (i = 0, resident = 0; i < FILESIZE_PAGES; i++) { if (vec[i]) resident++; } if (resident != 0) { printf("Nr unexpected pages resident: %d\n", resident); exit(EXIT_FAILURE); } munmap(buf, expected); close(fd); free(vec); exit(EXIT_SUCCESS); } Signed-off-by: NMel Gorman <mgorman@suse.de> Reported-by: NRob van der Heij <rvdheij@gmail.com> Tested-by: NRob van der Heij <rvdheij@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cliff Wickman 提交于
We at SGI have a need to address some very high physical address ranges with our GRU (global reference unit), sometimes across partitioned machine boundaries and sometimes with larger addresses than the cpu supports. We do this with the aid of our own 'extended vma' module which mimics the vma. When something (either unmap or exit) frees an 'extended vma' we use the mmu notifiers to clean them up. We had been able to mimic the functions __mmu_notifier_invalidate_range_start() and __mmu_notifier_invalidate_range_end() by locking the per-mm lock and walking the per-mm notifier list. But with the change to a global srcu lock (static in mmu_notifier.c) we can no longer do that. Our module has no access to that lock. So we request that these two functions be exported. Signed-off-by: NCliff Wickman <cpw@sgi.com> Acked-by: NRobin Holt <holt@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
This change adds a follow_page_mask function which is equivalent to follow_page, but with an extra page_mask argument. follow_page_mask sets *page_mask to HPAGE_PMD_NR - 1 when it encounters a THP page, and to 0 in other cases. __get_user_pages() makes use of this in order to accelerate populating THP ranges - that is, when both the pages and vmas arrays are NULL, we don't need to iterate HPAGE_PMD_NR times to cover a single THP page (and we also avoid taking mm->page_table_lock that many times). Signed-off-by: NMichel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
Use long type for page counts in mm_populate() so as to avoid integer overflow when running the following test code: int main(void) { void *p = mmap(NULL, 0x100000000000, PROT_READ, MAP_PRIVATE | MAP_ANON, -1, 0); printf("p: %p\n", p); mlockall(MCL_CURRENT); printf("done\n"); return 0; } Signed-off-by: NMichel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
nr_free_zone_pages(), nr_free_buffer_pages() and nr_free_pagecache_pages() are horribly badly named, so accurately document them with code comments in case of the misuse of them. [akpm@linux-foundation.org: tweak comments] Reviewed-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
error_states[] has two separate states "unevictable LRU page" and "mlocked LRU page", and the former one has the higher priority now. But because of that the latter one is rarely chosen because pages with PageMlocked highly likely have PG_unevictable set. On the other hand, PG_unevictable without PageMlocked is common for ramfs or SHM_LOCKed shared memory, so reversing the priority of these two states helps us clearly distinguish them. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-