So we can catch if the driver sets an incorrect dma_mask.
Reviewed-by: NGrant Grundler <grundler@google.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This allows us to find out what DMA mask is used for each PCI device at boot
time; useful for debugging.

After the patch:
ehci_hcd 0000:00:02.1: using 31bit consistent DMA mask
e1000 0000:0b:01.0: using 64bit DMA mask
e1000 0000:0b:01.0: using 64bit consistent DMA mask
e1000e 0000:04:00.0: using 64bit DMA mask
e1000e 0000:04:00.0: using 64bit consistent DMA mask
ixgb 0000:0c:01.0: using 64bit DMA mask
ixgb 0000:0c:01.0: using 64bit consistent DMA mask
aacraid 0000:86:00.0: using 32bit DMA mask
aacraid 0000:86:00.0: using 32bit consistent DMA mask
aacraid 0000:86:00.0: using 64bit DMA mask
aacraid 0000:86:00.0: using 64bit consistent DMA mask
qla2xxx 0000:0c:02.0: using 64bit consistent DMA mask
qla2xxx 0000:0c:02.1: using 64bit consistent DMA mask
lpfc 0000:06:00.0: using 64bit DMA mask
lpfc 0000:06:00.1: using 64bit DMA mask
pata_amd 0000:00:06.0: using 32bit DMA mask
pata_amd 0000:00:06.0: using 32bit consistent DMA mask
mptsas 0000:0c:04.0: using 64bit DMA mask
mptsas 0000:0c:04.0: using 64bit consistent DMA mask

forcedeth 0000:00:08.0: using 39bit DMA mask
forcedeth 0000:00:08.0: using 39bit consistent DMA mask
niu 0000:02:00.0: using 44bit DMA mask
niu 0000:02:00.0: using 44bit consistent DMA mask
sata_nv 0000:00:05.0: using 32bit DMA mask
sata_nv 0000:00:05.0: using 32bit consistent DMA mask
ib_mthca 0000:03:00.0: using 64bit DMA mask
ib_mthca 0000:03:00.0: using 64bit consistent DMA mask
Reviewed-by: NGrant Grundler <grundler@google.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

If we stop the kthread, we may end up up'ing the sem twice, which seems
unintended.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch factors out the search for an MMCONFIG region, which was
previously implemented in both mmconfig_32 and mmconfig_64.  No functional
change.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

No functional change; just tidy up printks and make them more consistent
with the rest of PCI.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This is only used internally now, but eventually will be used in the
hot-remove path to remove the MMCONFIG region associated with a host bridge.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This changes pci_mmcfg_region from a table to a list, to make it easier
to add and remove MMCONFIG regions for PCI host bridge hotplug.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This replaces "typeof(pci_mmcfg_config[0])" with the actual type because
I plan to convert pci_mmcfg_config to a list, and then "pci_mmcfg_config[0]"
won't mean anything.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The virtual address is only used for x86_64, but it's so much simpler
to manage it as part of the pci_mmcfg_region that I think it's worth
wasting a pointer per MMCONFIG region on x86_32.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Since pci_mmcfg_region contains the struct resource, no need to pass the
pci_mmcfg_region *and* the resource start/size.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch adds a resource and corresponding name to the MMCONFIG
structure.  This makes allocation simpler (we can allocate the
resource and name at the same time we allocate the pci_mmcfg_region),
and gives us a way to hang onto the resource after inserting it.
This will be needed so we can release and free it when hot-removing
a host bridge.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

No functional change, but simplifies a future patch to convert the table
to a list.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This only renames the struct pci_mmcfg_region members; no functional change.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This adds a struct pci_mmcfg_region with a little more information
than the struct acpi_mcfg_allocation used previously.  The acpi_mcfg
structure is defined by the spec, so we can't change it.

To begin with, struct pci_mmcfg_region is basically the same as the
ACPI MCFG version, but future patches will add more information.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This factors out the common "bus << 20" expression used when computing the
MMCONFIG address.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Since all MMCONFIG regions go through pci_mmconfig_add(), we can test the
address once there.  If the caller supplies an address of zero, we never
insert it in the pci_mmcfg_config[] table, so no need to test it elsewhere.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We never set pci_mmcfg_config unless we increment pci_mmcfg_config_num,
so there's no need to test both pci_mmcfg_config_num and pci_mmcfg_config.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch encapsulate pci_mmcfg_config[] updates.  All alloc/free is now
done in pci_mmconfig_add() and free_all_mcfg(), so all updates to
pci_mmcfg_config[] and pci_mmcfg_config_num are in those two functions.

This replaces the previous sequence of extend_mmcfg(), fill_one_mmcfg()
with the single pci_mmconfig_add() interface.  This interface is currently
static but will eventually be used in the host bridge hot-add path.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Step through the ACPI MCFG table, not pci_mmcfg_config[].  No functional
change, but simplifies future patches that encapsulate pci_mmcfg_config[].
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use a local variable, not pci_mmcfg_config_num, to count MCFG entries.
No functional change, but simplifies future changes.
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Those functions are used by intel_bus.c so seperate them to another file. and
make amd_bus a bit smaller.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

commit db635adc turned -DDEBUG for x86/pci on when CONFIG_PCI_DEBUG
is set. In general, I agree with that change.

However, it exposes a bunch of very low level PCI debugging in the
early x86 path, such as:

	0 reading 2 from a: ffff
	1 reading 2 from a: ffff
	2 reading 2 from a: ffff
	3 reading 2 from a: 300
	3 reading 2 from 0: 1002
	3 reading 2 from 2: 515e

These statements add a lot of noise to the boot and aren't likely to
be necessary even when handling random upstream bug reports.

[In contrast, statements such as these:

	pci 0000:02:04.0: found [14e4:164a] class 000200 header type 00
	pci 0000:02:04.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
	pci 0000:02:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]

are indeed useful when remote debugging users' machines]

Remove the noisy printks and save electrons everywhere.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Enabling power fault detected event notification in current pciehp
might cause power fault interrupt storm on some machines. On those
machines. On those machines, power fault detected bit in the slot
status register was set again immediately when it is cleared in the
interrupt service routine, and next power fault detected interrupt was
notified again. Therefore, disable power fault detected event
notification for now.

This patch also removes unnecessary handling for power fault cleared
event because this event is not supported by PCIe spec.
Tested-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Change for PCI hotplug to use pci_is_pcie() instead of checking
pci_dev->is_pcie.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Changes for PCIe AER driver to use pci_is_pcie() instead of checking
pci_dev->is_pcie.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Change for PCIe ASPM driver to use pci_is_pcie() instead of checking
pci_dev->is_pcie.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Change for PCI core to use pci_is_pcie() instead of checking
pci_dev->is_pcie.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Introduce pci_is_pcie() which returns true if the specified PCI device
is PCI Express capable, false otherwise.

The purpose of pci_is_pcie() is removing 'is_pcie' flag in the struct
pci_dev, which is not needed because we can check it using 'pcie_cap'
field. To remove 'is_pcie', we need to update user of 'is_pcie' to use
pci_is_pcie() instead first.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in pciehp driver. This avoids unnecessary search in PCI
configuration space. This patch also removes 'cap_base' field in
struct controller, that was used to hold PCIe capability offset by
pciehp itself.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCI hotplug core. This avoids unnecessary search in PCI
configuration space.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCIe ASPM driver. This avoids unnecessary search in PCI
configuration space.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCI Express Port Bus driver. This avoids unnecessary serarch
in PCI configuration space.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCIe AER driver. This avoids unnecessary search in PCI
configuration space.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCI core code. This avoids unnecessary search in PCI
configuration space.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Introduce pci_pcie_cap() API that returns saved PCIe capability offset
(currently it is saved in 'pcie_cap' field in the struct PCI dev).
Using pci_pcie_cap() instead of pci_find_capability() avoids
unnecessary search in PCI configuration space.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

I'm not entirely sure it needs to go into 32, but it's probably the right
thing to do. Another way of explaining the patch is:

 - we currently pick the _first_ exactly matching bus resource entry, but
   the _last_ inexactly matching one. Normally first/last shouldn't
   matter, but bus resource entries aren't actually all created equal: in
   a transparent bus, the last resources will be the parent resources,
   which we should generally try to avoid unless we have no choice. So
   "first matching" is the thing we should always aim for.

 - the patch is a bit bigger than it needs to be, because I simplified the
   logic at the same time. It used to be a fairly incomprehensible

	if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH))
		best = r;       /* Approximating prefetchable by non-prefetchable */

   and technically, all the patch did was to make that complex choice be
   even more complex (it basically added a "&& !best" to say that if we
   already gound a non-prefetchable window for the prefetchable resource,
   then we won't override an earlier one with that later one: remember
   "first matching").

 - So instead of that complex one with three separate conditionals in one,
   I split it up a bit, and am taking advantage of the fact that we
   already handled the exact case, so if 'res->flags' has the PREFETCH
   bit, then we already know that 'r->flags' will _not_ have it. So the
   simplified code drops the redundant test, and does the new '!best' test
   separately. It also uses 'continue' as a way to ignore the bus
   resource we know doesn't work (ie a prefetchable bus resource is _not_
   acceptable for anything but an exact match), so it turns into:

	/* We can't insert a non-prefetch resource inside a prefetchable parent .. */
	if (r->flags & IORESOURCE_PREFETCH)
		continue;
	/* .. but we can put a prefetchable resource inside a non-prefetchable one */
	if (!best)
		best = r;

   instead. With the comments, it's now six lines instead of two, but it's
   conceptually simpler, and I _could_ have written it as two lines:

	if ((res->flags & IORESOURCE_PREFETCH) && !best)
		best = r;	/* Approximating prefetchable by non-prefetchable */

   but I thought that was too damn subtle.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead.

Make the lock static while at it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch fixes the following compilation error introduced by a PCI related
features.

The change set of 5dd1af9f84c79bedd589db89e71ca733f3bf0ebd moves some
xen related definitions from the arch header file
(x86/include/asm/xen/hypervisor.h) to the common header file
(include/xen/xen.h).  So ia64/xen also follows it.

In file included from linux-next/include/xen/grant_table.h:41,
                 from linux-next/drivers/block/xen-blkfront.c:48:
linux-next/arch/ia64/include/asm/xen/hypervisor.h:43: error: nested redefinition of 'enum xen_domain_type'
linux-next/arch/ia64/include/asm/xen/hypervisor.h:43: error: redeclaration of 'enum xen_domain_type'
linux-next/arch/ia64/include/asm/xen/hypervisor.h:44: error: redeclaration of enumerator 'XEN_NATIVE'
linux-next/include/xen/xen.h:5: error: previous definition of 'XEN_NATIVE' was here
linux-next/arch/ia64/include/asm/xen/hypervisor.h:45: error: redeclaration of enumerator 'XEN_PV_DOMAIN'
linux-next/include/xen/xen.h:6: error: previous definition of 'XEN_PV_DOMAIN' was here
linux-next/arch/ia64/include/asm/xen/hypervisor.h:46: error: redeclaration of enumerator 'XEN_HVM_DOMAIN'
linux-next/include/xen/xen.h:7: error: previous definition of 'XEN_HVM_DOMAIN' was here
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>