This patch fixes some sign issues which were accidentally introduced
into the quota & statfs code during the endianess annotation process.
Also included is a general clean up which moves all of the _host
structures out of gfs2_ondisk.h (where they should not have been to
start with) and into the places where they are actually used (often only
one place). Also those _host structures which are not required any more
are removed entirely (which is the eventual plan for all of them).

The conversion routines from ondisk.c are also moved into the places
where they are actually used, which for almost every one, was just one
single place, so all those are now static functions. This also cleans up
the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__.

The net result is a reduction of about 100 lines of code, many functions
now marked static plus the bug fixes as mentioned above. For good
measure I ran the code through sparse after making these changes to
check that there are no warnings generated.

This fixes Red Hat bz #239686
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch cleans up the inode number handling code. The main difference
is that instead of looking up the inodes using a struct gfs2_inum_host
we now use just the no_addr member of this structure. The tests relating
to no_formal_ino can then be done by the calling code. This has
advantages in that we want to do different things in different code
paths if the no_formal_ino doesn't match. In the NFS patch we want to
return -ESTALE, but in the ->lookup() path, its a bug in the fs if the
no_formal_ino doesn't match and thus we can withdraw in this case.

In order to later fix bz #201012, we need to be able to look up an inode
without knowing no_formal_ino, as the only information that is known to
us is the on-disk location of the inode in question.

This patch will also help us to fix bz #236099 at a later date by
cleaning up a lot of the code in that area.

There are no user visible changes as a result of this patch and there
are no changes to the on-disk format either.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The following patch fixes Red Hat bz 229831. Without this patch its
possible for the wrong inode to be returned in certain cases. It is a
pretty unusual event, so that its taken some time to track down. Thanks
and due to Josef Whiter who did a lot of the testing required to thrack
this down and fix it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

ok, the following is the minimum changes to get NFSD going before we
settle down this issue .. would appreciate this in the tree so other NFS
related works can get done in parallel.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Move the glock acquisition to outside of the transactions.

Lock odering must be preserved in order to prevent ABBA
deadlocks. The current gfs2_change_nlink code would tries
to grab the glock after having started a transaction and thus is holding
the log lock. This is inconsistent with other code paths in
gfs that grab the resource group glock prior to staring
a tranactions.

One problem with this fix is that the resource group
lock is always grabbed now even if the inode still has
ref count and can not be marked for unlink.
Signed-off-by: NRussell Cattelan <cattelan@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

In certain cases, its possible for NFS to call the lookup code while
holding the glock (when doing a readdirplus operation) so we need to
check for that and not try and lock the glock twice. This also fixes a
typo in a previous NFS related GFS2 patch.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

I was looking something else up and came across this...

I don't honestly have a good reason to change it other than to make it
like every other Linux filesystem in this regard.  ;-)  It doesn't
functionally change anything, but makes some lines shorter. :)

I'm also curious; why does gfs2 have 64-bits of on-disk timestamps, but
not in timespec_t format, and only stores second resolutions?  Seems like
you're halfway to sub-second resolutions already.

I suppose if that gets implemented then all of the below should
instead be CURRENT_TIME not CURRENT_TIME_SEC.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

On Thu, Jan 11, 2007 at 10:26:27PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc3-mm1:
>...
>  git-gfs2-nmw.patch
>...
>  git trees
>...

This patch makes the needlessly globlal gfs2_change_nlink_i() static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Second round of gfs2_rename lock re-ordering to allow Anaconda adding
root partition on top of gfs2. Previous to this patch the recursive
lock detector in glock.c can be triggered due to attempting to lock
the rgrp twice. This fixes it by checking to see whether the rgrp
is already locked.

This fixes Red Hat bugzilla #221237
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Update the quilt header comments to match the
code changes.

Change gfs2_lookup_simple to return an error in the case
of a NULL inode.
The callers of gfs2_lookup_simple do not check for NULL
in the no entry case and such would end up dereferencing a NULL ptr.

This fixes:
http://projects.info-pull.com/mokb/MOKB-15-11-2006.htmlSigned-off-by: NRussell Cattelan <cattelan@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Bugzilla 215088

Fix deadlock in gfs2_change_nlink() while installing RHEL5 into GFS2
partition. The gfs2_rename() apparently needs block allocation for the
new name (into the directory) where it requires rg locks. At the same
time, while updating the nlink count for the replaced file,
gfs2_change_nlink() tries to return the inode meta-data back to resource
group where it needs rg locks too. Our logic doesn't allow process to
acquire these locks recursively by the same process  (RHEL installer)
that results a BUG call. This only happens within rename code path and
only if the destination file exists before the rename operation.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The lock order here should be parent -> child rather than
numeric order.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The gfs2_glock_nq_m_atime function is unused in so far as its only
ever called with num_gh = 1, and this falls through to the
gfs2_glock_nq_atime function, so we might as well call that directly.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This function wasn't really doing the right thing. There was no need
to update the inode size at this point and the updating of the
i_blocks field has now been moved to the places where di_blocks is
updated. A result of this patch and some those preceeding it is that
unlocking a glock is now a much more efficient process, since there
is no longer any requirement to copy data from the gfs2 inode into
the vfs inode at this point.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Since the inode number is constant, we don't need to keep updating
it everytime we refresh the other inode fields.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We were setting the inode flags from GFS2's flags far too often, even when they
couldn't possibly have changed. This patch reduces the amount of flag
setting going on so that we do it only when the inode is read in or
when the flags have changed. The create case is covered by the "when
the inode is read in" case.

This also fixes a bug where we didn't set S_SYNC correctly.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We don't need to use endian conversions for 0 initialisations
when creating a new on-disk inode.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This shrinks the size of the gfs2_inode by 8 bytes by
replacing the version counter with a one bit valid/invalid
flag.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is almost never used. Its there for backward
compatibility with GFS1. It doesn't need its own
field since it can always be calculated from the
inode mode & flags. This saves a bit more space
in the gfs2_inode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Remove the di_[amc]time fields and use inode->i_[amc]time
fields instead. This saves 24 bytes from the gfs2_inode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Remove the di_nlink field in favour of inode->i_nlink and
update the nlink handling to use the proper macros. This
saves 4 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Remove duplicate di_uid/di_gid fields in favour of using
inode->i_uid/inode->i_gid instead. This saves 8 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This removes the duplicate di_mode field in favour of using the
inode->i_mode field. This saves 4 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This removes the device numbers from this structure by using
inode->i_rdev instead. It also cleans up the code in gfs2_mknod.
It results in shrinking the gfs2_inode by 8 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The metadata header doesn't need to be stored in the incore
struct gfs2_inode since its constant, and this patch removes it.
Also, there is already a field for the inode's number in the
struct gfs2_inode, so we don't need one in struct gfs2_dinode_host
as well.

This saves 28 bytes of space in the struct gfs2_inode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Change argument for gfs2_dinode_print in order to prepare
for removal of duplicate fields between struct inode and
struct gfs2_dinode_host.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

gfs2_dinode_in() is only ever called from one place, so move it
to that place (in inode.c) and make it static.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is a preliminary patch to enable the removal of fields
in gfs2_dinode_host which are duplicated in struct inode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Everywhere this was called, a struct gfs2_inode was available,
but despite that, it was always called with a struct gfs2_dinode
as an argument. By making this change it paves the way to start
eliminating fields duplicated between the kernel's struct inode
and the struct gfs2_dinode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The latter is used as part of gfs2-private part of struct inode.
It actually stores a lot of fields differently; for now the
declaration is just cloned, inode field is swtiched and changes
propagated.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix the OOM error handling in inode.c where it was possible for
a NULL pointer to be dereferenced.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch has gfs2_security_init declared as a static function, which
is correct. As a result, the declaration of this function in inode.h is
removed (and thus inode.h is unchanged). Also removed #include eaops.h,
which is not needed.
Signed-Off-By: NRyan O'Hara <rohara@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This does nothing atm, but will be required for later support of
r/o bind mounts.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

In many places GFS2 was calling the endian conversion routines
for an inode even when only a single field, or a few fields might
have changed. As a result we were copying lots of data needlessly.

This patch replaces those calls with conversion of just the
required fields in each case. This should be faster and easier
to understand. There are still other places which suffer from this
problem, but this is a start in the right direction.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86.  (It would be more on an x86_64 system).  This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).

This patch:

The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer.  Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer.  This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

As per Andrew Morton's request, removed trailing whitespace.

Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>