drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf'
can be reduced. [variableScope]
drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a
value that is never used. [unreadVariable]
drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in
rsp_els already zeroes out memory, so memset is not needed
drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in
els_cmd_map already zeroes out memory, so memset is not needed

[mkp: added newline after variable declaration]

Link: https://lore.kernel.org/r/20200403084018.30766-2-njavali@marvell.comReported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NNilesh Javali <njavali@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When transitioning from loop to N2N, stale NPort ID is not
re-assigned. Stale ID can collide with remote device.  This patch will
re-assign NPort ID on N2N is detected.

Link: https://lore.kernel.org/r/20200226224022.24518-18-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NPIV re-enable code was blocked after FW had been initialized.  The
blocking check was too broad. Reduce the check to make sure if FW is
initialized or not.

Link: https://lore.kernel.org/r/20200226224022.24518-14-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For single port 28XX adapter, the second core can still run in the
background.  The flash semaphore can be held by the non-active core.
This patch tell MPI FW to check for this case and clear the semaphore
from the non-active core.

Link: https://lore.kernel.org/r/20200226224022.24518-12-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

commit e4e3a2ce ("scsi: qla2xxx: Add ability to autodetect SFP
type") takes a heavy handed approach to BPM (Buffer Plus Management)
enablement:

1) During hardware initialization, if an LR-capable transceiver is
   recognized, the driver schedules a disruptive post-initialization
   chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the
   firmware.  This chip-reset will result in (short-term) path-loss to
   all fc-rports and their attached SCSI devices.

2) LR-detection is triggered during any link-up event, resulting in a
   refresh and potential chip-reset

Based on firmware-team guidance, upon LR-capable transceiver
recognition, the driver's hardware initialization code will now
re-execute firmware with the new BPM settings, then continue on with
driver initialization.  To address the second issue, the driver
performs LR-capable detection upon the driver receiving a
transceiver-insertion asynchronous event from firmware.  No short-term
path loss is needed with this new semantic.

Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NAndrew Vasquez <andrewv@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch improved message for Secure Flash support.  No
functionality has been changed.

Link: https://lore.kernel.org/r/20200226224022.24518-6-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMichael Hernandez <mhernandez@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch allows sparse to verify the endianness of the arguments passed
to make_handle().

Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes the following sparse warnings:

drivers/scsi/qla2xxx/qla_mbx.c:120:21: warning: restricted pci_channel_state_t degrades to integer
drivers/scsi/qla2xxx/qla_mbx.c:120:37: warning: restricted pci_channel_state_t degrades to integer

>From include/linux/pci.h:

enum pci_channel_state {
	/* I/O channel is in normal state */
	pci_channel_io_normal = (__force pci_channel_state_t) 1,

	/* I/O to channel is blocked */
	pci_channel_io_frozen = (__force pci_channel_state_t) 2,

	/* PCI card is dead */
	pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};

Link: https://lore.kernel.org/r/20200220043441.20504-4-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes:

- qla2x00_issue_iocb_timeout will now return if chip is down

- only check for sp->qpair in abort handling

Link: https://lore.kernel.org/r/20200212214436.25532-24-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Ths patch fixes MBX in-direction for setting right bits for
qla2x00_echo_test()

Link: https://lore.kernel.org/r/20200212214436.25532-19-hmadhani@marvell.comSigned-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During Link up phase and Data rate MBX command response, print message
indicating FCE is enabled.

Link: https://lore.kernel.org/r/20200212214436.25532-11-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds RDP command support in the driver. With the help of new
ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command
to switch and will be able to receive various diagnostic data.

Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.comSigned-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch prepares code for implementing Vendor specific extended FDMI/RDP
commands. It also addes support for MBC_GET_PORT_DATABASE and
MBC_GET_RNID_PARAMS commands.

Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.comSigned-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch provides an interface to do the following (using MBC 0x3B):

 - Displays (in hex) the LED config words for all three LEDs.

 - Programs the config words for one LED or for all three LEDs.

The sysfs node defined is named beacon_config.

First, to allow driver to gain LED control, do this:
 # echo 1 > /sys/class/scsi_host/host#/beacon

Then, to display config words for all three LEDs do this:
 # cat /sys/class/scsi_host/host#/beacon_config

To set config words for all three LEDs do this:
 # echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config

Or, to set config word for a specific single LED n do this:
 # echo n xxxx > /sys/class/scsi_host/host#/beacon_config
  where n is the LED number (0, 1, 2)

Finally, to restore LED control back to firmware, do this:
 # echo 0 > /sys/class/scsi_host/host#/beacon

Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.comSigned-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

MTCP dump failed due to MB Reg 10 was picking garbage data from stack
memory.

Fixes: 81178772 ("[SCSI] qla2xxx: Implemetation of mctp.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

PORT UPDATE asynchronous event is generated on the host that issues PLOGI
ELS (in the case of higher WWPN). In that case, the event shouldn't be
handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that
trigger link flap.

Ignore the event if the host has higher WWPN, but handle otherwise.

Cc: Quinn Tran <qutran@marvell.com>
Link: https://lore.kernel.org/r/20191125165702.1013-13-r.bolshakov@yadro.comAcked-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Tested-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NRoman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

when GPSC/GPDB switch command fails, driver just returns without doing a
proper cleanup. This patch fixes this memory leak by calling sp->free() in
the error path.

Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.comReviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes issue with Gen7 adapter in a blade environment where one
of the ports will not be detected by driver. Firmware expects mailbox 11 to
be set or cleared by driver for newer ISP.

Following message is seen in the log file:

[   18.810892] qla2xxx [0000:d8:00.0]-1820:1: **** Failed=102 mb[0]=4005 mb[1]=37 mb[2]=20 mb[3]=8
[   18.819596]  cmd=2 ****

[mkp: typos]

Link: https://lore.kernel.org/r/20191022193643.7076-2-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same
WWN.  The driver now offers a user option by way of NVRAM parameter to
allow users to choose, on a per port basis, the kind of FC-4 type they
would like to prioritize for login.

Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.comSigned-off-by: NMichael Hernandez <mhernandez@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During link up/bounce, qla driver would do command flush as part of
cleanup.  In this case, the flush can intefere with FW state.  This patch
allows FW to be in control of link up.

Link: https://lore.kernel.org/r/20190912180918.6436-7-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix stalled link recovery for N2N with FC-NVMe connection.

Link: https://lore.kernel.org/r/20190912180918.6436-6-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

HINT_MBX_INT_PENDING is not guaranteed to be cleared by firmware. Remove
check that prevent driver load with ISP82XX.
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20190830222402.23688-4-hmadhani@marvell.comSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since all pointers passed to the srb_t.done() and srb_t.free() functions
have type srb_t, change the type of the first argument of these functions
from void * into struct srb *. This allows the compiler to verify the
argument types for these functions. This patch does not change any
functionality.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Tested-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It is helpful when debugging this driver to have the firmware status code
available if a mailbox command fails. Hence report that firmware status
code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Tested-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It is important to know why a firmware command failed. Hence log 'rval'
together with the values of the mailbox registers if a firwmare command
fails.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Improve source code readability by inserting spaces where these are
required according to the coding standard. This patch only inserts
whitespace and does not make any other changes.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch improves readability of the qla2xxx source code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently the FC-NVMe driver is leverating the SCSI FC transport class to
access the remote ports. Which means that all FC-NVMe remote ports will be
visible to the fc transport layer, but due to missing definitions the port
roles will always be 'unknown'.  This patch adds the missing definitions to
the fc transport class to that the port roles are correctly displayed.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NGiridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds support for Secure flash update with ISP28xx.
Signed-off-by: NMichael Hernandez <mhernandez@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does following:

 - Clean up NVRAM code.
 - Optimizes reading of primary/secondary flash image validation.
 - Remove 0xff mask and make correct width in FLT structure.
 - Use endian macros to assign static fields in fwdump header.
 - Correct fdwt checksum calculation.
 - Simplify ql_dump_buffer() interface usage.
 - Add endianizers to 27xx firmware image validator.
 - fixes compiler warnings for big endian architecture.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes reported speed for min_link and max_supported speed. Also
rename sysfs nodes link_speed and max_supported to be consistent with
{min|max}_suuported_speed.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NMike Hernandez <mhernandez@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds sysfs node for serdes_version and also cleans up port_speed
display.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds PCI device ID ISP28XX for Gen7 support.  Also signature
determination for primary/secondary flash image for ISP27XX/28XX is aded as
part of Gen7 support.
Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Current code hard codes marker request to use request and response queue
0. This patch make use of the qpair as the path to access the
request/response queues.  It allows marker to be place on any hardware
queue.
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds sysfs node

1. There is a new sysfs node port_speed
2. The possible values are 2(Auto neg), 8, 16, 32
3. A value outside of the above defaults to Auto neg
4. Any update to the setting causes a link toggle
5. This feature is currently only for ISP27xx
Signed-off-by: NAnil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add Support for First Burst for FC-NVMe protocol. This feature requires
First Burst support in the firmware.
Signed-off-by: NDarren Trapp <darren.trapp@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For eh_bus_reset, driver is supposed to reset the link.  Current option to
reset the link is applicable to Loop only. This patch updates current FW
option with the one that is applicable to all topologies.
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds new BIT detection to enable FC-NVMe feature in the driver.

[mkp: fixed Giridhar's SoB]
Signed-off-by: NGiridhar Malavali <gmalavali@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch avoids that complaints about kernel-doc headers are reported
when building with W=1.

Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns when a variable is assigned to itself.

drivers/scsi/qla2xxx/qla_mbx.c:1514:4: warning: explicitly assigning
value of variable of type 'uint64_t' (aka 'unsigned long long') to
itself [-Wself-assign]
        l = l;
        ~ ^ ~
1 warning generated.

This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010 ("Raise the minimum required gcc version to 4.6").
Just remove this line to silence Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/83Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>