For creation, as soon as the umem_odp is created the notifier can be
called, however the underlying MR may not have been setup yet. This would
cause problems if mlx5_ib_invalidate_range() runs. There is some
confusing/ulocked/racy code that might by trying to solve this, but
without locks it isn't going to work right.

Instead trivially solve the problem by short-circuiting the invalidation
if there are not yet any DMA mapped pages. By definition there is nothing
to invalidate in this case.

The create code will have the umem fully setup before anything is DMA
mapped, and npages is fully locked by the umem_mutex.

For destroy, invalidate the entire MR at the HW to stop DMA then DMA unmap
the pages before destroying the MR. This drives npages to zero and
prevents similar racing with invalidate while the MR is undergoing
destruction.

Arguably it would be better if the umem was created after the MR and
destroyed before, but that would require a big rework of the MR code.

Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191009160934.3143-15-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

These mkeys are entirely internal and are never used by the HW for
page fault. They should also never be used by userspace for prefetch.
Simplify & optimize things by not including them in the xarray.

Since the prefetch path can now never see a child mkey there is no need
for the second synchronize_srcu() during imr destroy.

Link: https://lore.kernel.org/r/20191009160934.3143-14-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use SRCU in a sensible way by removing all MRs in the implicit tree from
the two xarrays (the update operation), then a synchronize, followed by a
normal single threaded teardown.

This is only a little unusual from the normal pattern as there can still
be some work pending in the unbound wq that may also require a workqueue
flush. This is tracked with a single atomic, consolidating the redundant
existing atomics and wait queue.

For understand-ability the entire ODP implicit create/destroy flow now
largely exists in a single pair of functions within odp.c, with a few
support functions for tearing down an unused child.

Link: https://lore.kernel.org/r/20191009160934.3143-13-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that the locking is simplified combine pagefault_implicit_mr() with
implicit_mr_get_data() so that we sweep over the idx range only once,
and do the single xlt update at the end, after the child umems are
setup.

This avoids double iteration/xa_loads plus the sketchy failure path if the
xa_load() fails.

Link: https://lore.kernel.org/r/20191009160934.3143-12-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that the child MRs are stored in an xarray we can rely on the SRCU
lock to protect the xa_load and use xa_cmpxchg on the slow allocation path
to resolve races with concurrent page fault.

This reduces the scope of the critical section of umem_mutex for implicit
MRs to only cover mlx5_ib_update_xlt, and avoids taking a lock at all if
the child MR is already in the xarray. This makes it consistent with the
normal ODP MR critical section for umem_lock, and the locking approach
used for destroying an unusued implicit child MR.

The MLX5_IB_UPD_XLT_ATOMIC is no longer needed in implicit_get_child_mr()
since it is no longer called with any locks.

Link: https://lore.kernel.org/r/20191009160934.3143-11-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently the child leaves are stored in the shared interval tree and
every lookup for a child must be done under the interval tree rwsem.

This is further complicated by dropping the rwsem during iteration (ie the
odp_lookup(), odp_next() pattern), which requires a very tricky an
difficult to understand locking scheme with SRCU.

Instead reserve the interval tree for the exclusive use of the mmu
notifier related code in umem_odp.c and give each implicit MR a xarray
containing all the child MRs.

Since the size of each child is 1GB of VA, a 1 level xarray will index 64G
of VA, and a 2 level will index 2TB, making xarray a much better
data structure choice than an interval tree.

The locking properties of xarray will be used in the next patches to
rework the implicit ODP locking scheme into something simpler.

At this point, the xarray is locked by the implicit MR's umem_mutex, and
read can also be locked by the odp_srcu.

Link: https://lore.kernel.org/r/20191009160934.3143-10-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The single routine has a very confusing scheme to advance to the next
child MR when working on an implicit parent. This scheme can only be used
when working with an implicit parent and must not be triggered when
working on a normal MR.

Re-arrange things by directly putting all the single-MR stuff into one
function and calling it in a loop for the implicit case. Simplify some of
the error handling in the new pagefault_real_mr() to remove unneeded gotos.

Link: https://lore.kernel.org/r/20191009160934.3143-9-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of rewriting all the IOVA's to 0 as things progress down the tree
make the IOVA of the children equal to placement in the tree. This makes
things easier to understand by keeping mmkey.iova == HW configuration.

Link: https://lore.kernel.org/r/20191009160934.3143-8-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This makes the routines easier to understand, particularly with respect
the locking requirements of the entire sequence. The implicit_mr_alloc()
had a lot of ifs specializing it to each of the callers, and only a very
small amount of code was actually shared.

Following patches will cause the flow in the two functions to diverge
further.

Link: https://lore.kernel.org/r/20191009160934.3143-7-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This function is intended to loop across each MTT chunk in the implicit
parent that intersects the range [io_virt, io_virt+bnct).  But it is has a
confusing construction, so:

- Consistently use imr and odp_imr to refer to the implicit parent
  to avoid confusion with the normal mr and odp of the child
- Directly compute the inclusive start/end indexes by shifting. This is
  clearer to understand the intent and avoids any errors from unaligned
  values of addr
- Iterate directly over the range of MTT indexes, do not make a loop
  out of goto
- Follow 'success oriented flow', with goto error unwind
- Directly calculate the range of idx's that need update_xlt
- Ensure that any leaf MR added to the interval tree always results in an
  update to the XLT

Link: https://lore.kernel.org/r/20191009160934.3143-6-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

No users are left, delete it.

Link: https://lore.kernel.org/r/20191009160934.3143-5-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is a per device xarray storing mkeys that is used to store every
mkey in the system. However, this xarray is now only read by ODP for
certain ODP designated MRs (ODP, implicit ODP, MW, DEVX_INDIRECT).

Create an xarray only for use by ODP, that only contains ODP related
MKeys. This xarray is protected by SRCU and all erases are protected by a
synchronize.

This improves performance:

 - All MRs in the odp_mkeys xarray are ODP MRs, so some tests for is_odp()
   can be deleted. The xarray will also consume fewer nodes.

 - normal MR's are never mixed with ODP MRs in a SRCU data structure so
   performance sucking synchronize_srcu() on every MR destruction is not
   needed.

 - No smp_load_acquire(live) and xa_load() double barrier on read

Due to the SRCU locking scheme care must be taken with the placement of
the xa_store(). Once it completes the MR is immediately visible to other
threads and only through a xa_erase() & synchronize_srcu() cycle could it
be destroyed.

Link: https://lore.kernel.org/r/20191009160934.3143-4-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The locking model for signature is completely different than ODP, do not
share the same xarray that relies on SRCU locking to support ODP.

Simply store the active mlx5_core_sig_ctx's in an xarray when signature
MRs are created and rely on trivial xarray locking to serialize
everything.

The overhead of storing only a handful of SIG related MRs is going to be
much less than an xarray full of every mkey.

Link: https://lore.kernel.org/r/20191009160934.3143-3-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When working with SRCU protected xarrays the xarray itself should be the
SRCU 'update' point. Instead prefetch is using live as the SRCU update
point and this prevents switching the locking design to use the xarray
instead.

To solve this the prefetch must only read from the xarray once, and hold
on to the actual MR pointer for the duration of the async
operation. Incrementing num_pending_prefetch delays destruction of the MR,
so it is suitable.

Prefetch calls directly to the pagefault_mr using the MR pointer and only
does a single xarray lookup.

All the testing if a MR is prefetchable or not is now done only in the
prefetch code and removed from the pagefault critical path.

Link: https://lore.kernel.org/r/20191009160934.3143-2-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This change allows the RDMA stack to use physical resource numbers if they
are passed up from the device. This is accomplished by separating the
concept of the QP number from the QP handle. Previously, the two were the
same, as the QP number was exposed to the guest and also used to reference
a virtual QP in the device backend.

With physical resource numbers exposed, the QP number given to the guest
is the number assigned from the physical HCA's QP, while the QP handle is
still the internal handle used to reference a virtual QP. Regardless of
whether the device is exposing physical ids, the driver will still try to
pick up the QP handle from the backend if possible. The MR keys exposed to
the guest will also be the MR keys created by the physical HCA, instead of
virtual MR keys. The distinction between handle and keys is already
present for MRs so there is no need to do anything special here.

A new version of the create QP response has been added to the device API
to pass up the QP number and handle. The driver will also report these to
userspace in the udata response if userspace supports it or not create the
queuepair if not. I also had to do a refactor of the destroy qp code to
reuse it if we fail to copy to userspace.

Link: https://lore.kernel.org/r/20191028181444.19448-1-aditr@vmware.comReviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Query speed/width from corresponding netdev.

Link: https://lore.kernel.org/r/1572001022-4533-1-git-send-email-bharat@chelsio.comSigned-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

User QPs pbl's weren't freed properly.
MR pbls weren't freed properly.

Fixes: e0290cce ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20191027200451.28187-5-michal.kalderon@marvell.comSigned-off-by: NAriel Elior <ariel.elior@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Re-design of the iWARP CM related objects reference counting and
synchronization methods, to ensure operations are synchronized correctly
and that memory allocated for "ep" is properly released. Also makes sure
QP memory is not released before ep is finished accessing it.

Where as the QP object is created/destroyed by external operations, the ep
is created/destroyed by internal operations and represents the tcp
connection associated with the QP.

QP destruction flow:
- needs to wait for ep establishment to complete (either successfully or
  with error)
- needs to wait for ep disconnect to be fully posted to avoid a race
  condition of disconnect being called after reset.
- both the operations above don't always happen, so we use atomic flags to
  indicate whether the qp destruction flow needs to wait for these
  completions or not, if the destroy is called before these operations
  began, the flows will check the flags and not execute them ( connect /
  disconnect).

We use completion structure for waiting for the completions mentioned
above.

The QP refcnt was modified to kref object.  The EP has a kref added to it
to handle additional worker thread accessing it.

Memory Leaks - https://www.spinics.net/lists/linux-rdma/msg83762.html

Concurrency not managed correctly -
https://www.spinics.net/lists/linux-rdma/msg67949.html

Fixes: de0089e6 ("RDMA/qedr: Add iWARP connection management qp related callbacks")
Link: https://lore.kernel.org/r/20191027200451.28187-4-michal.kalderon@marvell.comReported-by: NChuck Lever <chuck.lever@oracle.com>
Reported-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NAriel Elior <ariel.elior@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The qpids xarray isn't accessed from irq context and therefore there
is no need to use the xa_XXX_irq version of the apis.
Remove the _irq.

Fixes: b6014f9e ("qedr: Convert qpidr to XArray")
Link: https://lore.kernel.org/r/20191027200451.28187-3-michal.kalderon@marvell.comSigned-off-by: NAriel Elior <ariel.elior@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There was a missing initialization for the srqs xarray.
SRQs xarray can also be called from irq context when searching
for an element and uses the xa_XXX_irq apis, therefore should
be initialized with IRQ flags.

Fixes: 9fd15987 ("qedr: Convert srqidr to XArray")
Link: https://lore.kernel.org/r/20191027200451.28187-2-michal.kalderon@marvell.comSigned-off-by: NAriel Elior <ariel.elior@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the error return path when the call to function
dev->dfx->query_cqc_info fails will leak object 'context'. Fix this by
making the error return path via 'err' return return codes rather than
-EMSGSIZE, set ret appropriately for all error return paths and for the
memory leak now return via 'err' rather than just returning without
freeing context.

Link: https://lore.kernel.org/r/20191024131034.19989-1-colin.king@canonical.com
Addresses-Coverity: ("Resource leak")
Fixes: e1c9a0dc ("RDMA/hns: Dump detailed driver-specific CQ")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

qpc/cqc timer entry size needs one page, but currently they are fixedly
configured to 4096, which is not appropriate in 64K page scenarios. So
they should be modified to PAGE_SIZE.

Fixes: 0e40dc2f ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1571908917-16220-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

SRQ's page size configuration of BA and buffer should depend on current
PAGE_SHIFT, or it can't work in scenario of 64K page.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1571908917-16220-2-git-send-email-liweihang@hisilicon.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HNS redefined available in bits.h define and didn't use it, we can safely
delete it.

Link: https://lore.kernel.org/r/20191023054239.31648-1-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The "ucmd->log_sq_bb_count" variable is a user controlled variable in the
0-255 range.  If we shift more than then number of bits in an int then
it's undefined behavior (it shift wraps), and potentially the int could
become negative.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20190608092514.GC28890@mwandaReported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>

There is little value in keeping separate function for one flag, provide
it directly like any other mlx5 define.

Link: https://lore.kernel.org/r/20191020064400.8344-2-leon@kernel.orgSigned-off-by: NMichael Guralnik <michaelgur@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

mlx5_ib_dc_atomic_is_supported function is not used anywhere. Remove the
dead code.

Fixes: a60109dc ("IB/mlx5: Add support for extended atomic operations")
Link: https://lore.kernel.org/r/20191020064454.8551-1-leon@kernel.orgSigned-off-by: NRan Rozenstein <ranro@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add RDMA nldev netlink interface for dumping MR statistics information.

Output example:

$ ./ibv_rc_pingpong -o -P -s 500000000
  local address:  LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID ::

$ rdma stat show mr
dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0

Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.orgSigned-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Provide an ODP explicit/implicit type as part of 'rdma -dd resource show
mr' dump.

For example:

$ rdma -dd resource show mr
dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000
pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit

For non-ODP MRs, we won't print "drv_odp ..." at all.

Link: https://lore.kernel.org/r/20191016062308.11886-4-leon@kernel.orgSigned-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce ODP diagnostic counters and count the following
per MR within IB/mlx5 driver:
 1) Page faults:
	Total number of faulted pages.
 2) Page invalidations:
	Total number of pages invalidated by the OS during all
	invalidation events. The translations can be no longer
	valid due to either non-present pages or mapping changes.

Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.orgSigned-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Allows the IB device to provide a value of maximum scatter gather entries
per RDMA READ.

In certain cases it may be preferable for a device to perform UMR memory
registration rather than have many scatter entries in a single RDMA READ.
This provides a significant performance increase in devices capable of
using different memory registration schemes based on the number of scatter
gather entries. This general capability allows each device vendor to fine
tune when it is better to use memory registration.

Link: https://lore.kernel.org/r/20191007135933.12483-4-leon@kernel.orgSigned-off-by: NYamin Friedman <yaminf@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Even if no response from hardware, we should make sure that qp related
resources are released to avoid memory leaks.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1570584110-3659-1-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

HNS_ROCE_ALOGN_UP should be HNS_ROCE_ALIGN_UP, this patch fix it.
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-6-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

The restrack function return EINVAL instead of EMSGSIZE when the driver
operation fails.

Fixes: 4b42d05d ("RDMA/hns: Remove unnecessary kzalloc")
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-5-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

The name of vlan and vlan_tag is not clear enough, it's actually means
vlan id.
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-4-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

The parameters npages used to initial mtt of srq->idx_que shouldn't be
same with srq's. And page_shift should be calculated from idx_buf_pg_sz.
This patch fixes above issues and use field named npage and page_shift
in hns_roce_buf instead of two temporary variables to let us use them
anywhere.

Fixes: 18df508c ("RDMA/hns: Remove if-else judgment statements for creating srq")
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Type of ah->av.vlan is u16, there will be a problem using le16_to_cpu
on it.

Fixes: 82e620d9 ("RDMA/hns: Modify the data structure of hns_roce_av")
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-2-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Introduce and use set_mkc_access_pd_addr_fields() which sets mkey
context's access rights, PD, address fields.  Thereby avoid the code
duplication.

Link: https://lore.kernel.org/r/20191006155443.31068-1-leon@kernel.orgSigned-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Broadcom's 575xx adapter series has support for SRIOV VFs.  Making changes
to enable SRIOV VF support. There are two major area where changes are
done:

 - Added new DB location for control-path and data-path DB ring

 - New devices do not need to issue the sriov-config slow-path command
   thus, skipping to call that firmware command.

For now enabling support for 64 RoCE VFs.

Link: https://lore.kernel.org/r/1570081715-14301-1-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

While MR uses live as the SRCU 'update', the MW case uses the xarray
directly, xa_erase() causes the MW to become inaccessible to the pagefault
thread.

Thus whenever a MW is removed from the xarray we must synchronize_srcu()
before freeing it.

This must be done before freeing the mkey as re-use of the mkey while the
pagefault thread is using the stale mkey is undesirable.

Add the missing synchronizes to MW and DEVX indirect mkey and delete the
bogus protection against double destroy in mlx5_core_destroy_mkey()

Fixes: 534fd7aa ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.caReviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>