This will shorten the length of code lines. All GISA related
static inline functions are local to interrupt.c.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-7-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Interruption types that are not represented in GISA shall
use pending_irqs_no_gisa() to test pending interruptions.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-6-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The change helps to reduce line length and
increases code readability.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-5-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The vcpu idle_mask state is used by but not specific
to the emulated floating interruptions. The state is
relevant to gisa related interruptions as well.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Acked-by: NHalil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-4-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use a consistent bitmap declaration throughout the code.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-3-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The explicit else path specified in set_intercept_indicators_io
is not required as the function returns in case the first branch
is taken anyway.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-2-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Since swait basically implemented exclusive waits only, make sure
the API reflects that.

  $ git grep -l -e "\<swake_up\>"
		-e "\<swait_event[^ (]*"
		-e "\<prepare_to_swait\>" | while read file;
    do
	sed -i -e 's/\<swake_up\>/&_one/g'
	       -e 's/\<swait_event[^ (]*/&_exclusive/g'
	       -e 's/\<prepare_to_swait\>/&_exclusive/g' $file;
    done

With a few manual touch-ups.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: bigeasy@linutronix.de
Cc: oleg@redhat.com
Cc: paulmck@linux.vnet.ibm.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180612083909.261946548@infradead.org

In KVM code we use masks to test/set control registers.

Let's define the ones we use in arch/s390/include/asm/ctl_reg.h and
replace all occurrences in KVM code.

As we will be needing the define for Clock-comparator sign control soon,
let's also add it.
Suggested-by: NCollin L. Walling <walling@linux.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NJanosch Frank <frankja@linux.ibm.com>
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

For testing the exitless interrupt support it turned out useful to
have separate counters for inject and delivery of I/O interrupt.
While at it do the same for all interrupt types. For timer
related interrupts (clock comparator and cpu timer) we even had
no delivery counters. Fix this as well. On this way some counters
are being renamed to have a similar name.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>

This counter can be used for administration, debug or test purposes.
Suggested-by: NVladislav Mironov <mironov@de.ibm.com>
Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Missed when enabling the Multiple-epoch facility. If the facility is
installed and the control is set, a sign based comaprison has to be
performed.

Right now we would inject wrong interrupts and ignore interrupt
conditions. Also the sleep time is calculated in a wrong way.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-2-david@redhat.com>
Fixes: 8fa1696e ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Just like for the interception handlers, let's also use a switch-case
in our interrupt delivery code.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180206141743.24497-1-david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If GISA is available, we do not have to kick CPUs out of SIE to deliver
interrupts. The hardware can deliver such interrupts while running.

Cc: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

For interrupt injection of floating interrupts we queue the interrupt
either in the GISA or in the floating  interrupt list. The first CPU
that looks at these data structures - either in KVM code or hardware
will then deliver that interrupt. To minimize latency we also:
-a: choose a VCPU to deliver that interrupt. We prefer idle CPUs
-b: we wake up the host thread that runs the VCPU
-c: set an I/O intervention bit for that CPU so that it exits guest
    context as soon as the PSW I/O mask is enabled
This will make sure that this CPU will execute the interrupt delivery
code of KVM very soon.

We can now optimize the injection case if we have exitless interrupts.
The wakeup is still necessary in case the target CPU sleeps. We can
avoid the I/O intervention request bit though. Whenever this
intervention request would be handled, the hardware could also directly
inject the interrupt on that CPU, no need to go through the interrupt
injection loop of KVM.

Cc: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The patch modifies the previously defined GISA data structure to be
able to store two GISA formats, format-0 and format-1. Additionally,
it verifies the availability of the GISA format facility and enables
the use of a format-1 GISA in the SIE control block accordingly.

A format-1 can do everything that format-0 can and we will need it
for real HW passthrough. As there are systems with only format-0
we keep both variants.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If the AIV facility is available, a GISA will be used to manage emulated
adapter interrupts.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The function returns a pending I/O interrupt with the highest
priority defined by its ISC.

Together with AIV activation, pending adapter interrupts are
managed by the GISA IPM. Thus kvm_s390_get_io_int() needs to
inspect the IPM as well when the interrupt with the highest
priority has to be identified.

In case classic and adapter interrupts with the same ISC are
pending, the classic interrupt will be returned first.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Pending interrupts marked in the GISA IPM are required to
become part of the answer of ioctl KVM_DEV_FLIC_GET_ALL_IRQS.

The ioctl KVM_DEV_FLIC_ENQUEUE is already capable to enqueue
adapter interrupts when a GISA is present.

With ioctl KVM_DEV_FLIC_CLEAR_IRQS the GISA IPM wil be cleared
now as well.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The function isc_to_int_word() allows the generation of interruption
words for adapter interrupts.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.

This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.

To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.

Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.

Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).

The code will be activated with a follow-up patch.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The patch implements routines to access the GISA to test and modify
its Interruption Pending Mask (IPM) from the host side.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch prepares a simplification of bit operations between the irq
pending mask for emulated interrupts and the Interruption Pending Mask
(IPM) which is part of the Guest Interruption State Area (GISA), a feature
that allows interrupt delivery to guests by means of the SIE instruction.

Without that change, a bit-wise *or* operation on parts of these two masks
would either require a look-up table of size 256 bytes to map the IPM
to the emulated irq pending mask bit orientation (all bits mirrored at half
byte) or a sequence of up to 8 condidional branches to perform tests of
single bit positions. Both options are to be rejected either by performance
or space utilization reasons.

Beyond that this change will be transparent.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it just like kvm_s390_set_cpuflags().
Suggested-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it in all places where we set cpuflags.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-3-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

No need to make this function special. Move it to a header right away.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-2-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

"wq" is not used at all. "cpuflags" can be access directly via the vcpu,
just as "float_int" via vcpu->kvm.
While at it, reuse _set_cpuflag() to make the code look nicer.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180108193747.10818-1-david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

It is not required to take to a lock to protect access to the cpuflags
of the local interrupt structure of a vcpu as the performed operation
is an atomic_or.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner.  So the extra GPL
text wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

There is a chance to delete not yet delivered I/O interrupts if an
exploiter uses the subsystem identification word 0x0000 while
processing a KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl. -EINVAL will be returned
now instead in that case.

Classic interrupts will always have bit 0x10000 set in the schid while
adapter interrupts have a zero schid. The clear_io_irq interface is
only useful for classic interrupts (as adapter interrupts belong to
many devices). Let's make this interface more strict and forbid a schid
of 0.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The abstraction of the conversion between an isc value and an irq_type
by means of functions isc_to_irq_type() and irq_type_to_isc() allows
to clarify the respective operations where used.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

swait_active does not enforce any ordering and it can therefore trigger
some subtle races when the CPU moves the read for the check before a
previous store and that store is then used on another CPU that is
preparing the swait.

On s390 there is a call to swait_active in kvm_s390_vcpu_wakeup. The
good thing is, on s390 all potential races cannot happen because all
callers of kvm_s390_vcpu_wakeup do not store (no race) or use an atomic
operation, which handles memory ordering. Since this is not guaranteed
by the Linux semantics (but by the implementation on s390) let's add
smp_mb_after_atomic to make this obvious and document the ordering.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The nmi.h header has some constant defines for control register bits.
These definitions should really be located in ctl_reg.h. Move and
rename the defines.
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Move the real logic that always has to be executed out of the
WARN_ON_ONCE.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-3-david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If the exit flag of SIE indicates that a machine check has happened
during guest's running and needs to be injected, inject it to the guest
accordingly.
But some machine checks, e.g. Channel Report Pending (CRW), refer to
host conditions only (the guest's channel devices are not managed by
the kernel directly) and are therefore not injected into the guest.
External Damage (ED) is also not reinjected into the guest because ETR
conditions are gone in Linux and STP conditions are not enabled in the
guest, and ED contains only these 8 ETR and STP conditions.
In general, instruction-processing damage, system recovery,
storage error, service-processor damage and channel subsystem damage
will be reinjected into the guest, and the remain (System damage,
timing-facility damage, warning, ED and CRW) will be handled on the host.
Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In some cases, userspace needs to get or set all ais states for example
migration. So we introduce a new group KVM_DEV_FLIC_AISM_ALL to provide
interfaces to get or set the adapter-interruption-suppression mode for
all ISCs. The corresponding documentation is updated.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If ais is disabled via cpumodel, we must act accordingly, even if
KVM_CAP_S390_AIS was enabled.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com>

When delivering a machine check the CPU state is "loaded", which
means that some registers are already in the host registers.
Before writing the register content into the machine check
save area, we must make sure that we save the content of the
registers into the data structures that are used for delivering
the machine check.
We already do the right thing for access, vector/floating point
registers, let's do the same for guarded storage.

Fixes: 4e0b1ab7 ("KVM: s390: gs support for kvm guests")
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Inject adapter interrupts on a specified adapter which allows to
retrieve the adapter flags, e.g. if the adapter is subject to AIS
facility or not. And add documentation for this interface.

For adapters subject to AIS, handle the airq injection suppression
for a given ISC according to the interruption mode:
- before injection, if NO-Interruptions Mode, just return 0 and
  suppress, otherwise, allow the injection.
- after injection, if SINGLE-Interruption Mode, change it to
  NO-Interruptions Mode to suppress the following interrupts.

Besides, add tracepoint for suppressed airq and AIS mode transitions.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: NFei Li <sherrylf@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>