This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used
on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards
are producing the following runtime errors only on the multi_v7_defconfig [2]:

kern.err: deviceless supply vdd_arm not found, using dummy regulator
kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500
kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22

I reviewed the exynos_defconfig, which does not produce these runtime
errors. It was obvious that the exynos_defconfig has the PMIC drivers
enabled, whereas the multi_v7_defconfig does not. This patch has been tested
on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors.
Therefore, I purpose we enabled these drivers in the multi_v7_defconfig.

[1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824
[2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.htmlSigned-off-by: NTyler Baker <tyler.baker@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig

Pull "First batch of defconfigs for AT91 / 3.19:" from Nicolas Ferre:

- use NEON for all C-A5, neon code handles the !NEON case
- add new XDMA driver
- add some useful drivers as we only have a single defconfig for all
  AT91SAM9/RM9200

* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/defconfig: add DM9000 to at91_dt
  ARM: at91/defconfig: add QT1070 to at91_dt
  ARM: at91/defconfig: add TCB PWM driver selection
  ARM: at91/defconfig: add the XDMA driver
  ARM: at91: sama5: update defconfig
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This chip is present on at91sam9261ek board: add it to the at91_dt_defconfig.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

As this touch button driver is used on at91sam9x5ek, it's better to enable it.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This is the selection of the new PWM driver using TC Blocks. This driver is
useful so we enable it in both sama5 and at91_dt defconfig files.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the Atmel eXtended DMA Controller driver option. This driver is first used
on SAMA5D4 SoCs and only relevant in sama5_defconfig file.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add neon support for sama5d4 and large blocks/files support.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This is a squash of several imx_v6_v7_defconfig update patches.

 - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board)
 - Enable DS1307 rtc and gpio fan by default (TBS2910 board)
 - Select thermal related drivers
 - Add SNVS power off driver
Signed-off-by: NDmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: NSoeren Moch <smoch@web.de>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NRobin Gong <b38343@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-3.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig

Pull "ARM: tegra: Default configuration changes for v3.19" from Thierry Reding:

This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.

* tag 'tegra-for-3.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Regenerate default configuration
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull "mvebu defconfig changes for v3.19 (round 2)" from Jason Cooper:

 - mvebu
    - Add SDHCI, i2c, and MTD_BLOCK

* tag 'mvebu-defconfig-3.19-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig
  ARM: mvebu: enable i2c device in mvebu_v7_defconfig
  ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfig
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Tested on hix5hd2 platform with mmc, usb, network, reboot etc.
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

16 minors per MMC block device are required to boot Rinato (Gear 2)
board because up to 15 partitions are used.

With default 8 minors booting failed with:
[    1.329092] mmcblk0: mmc0:0001 F5X5MA 3.64 GiB
[    1.329448] mmcblk0boot0: mmc0:0001 F5X5MA partition 1 4.00 MiB
[    1.329627] mmcblk0boot1: mmc0:0001 F5X5MA partition 2 4.00 MiB
[    1.329808] mmcblk0rpmb: mmc0:0001 F5X5MA partition 3 512 KiB
[    1.335717]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    1.436553] Waiting for root device /dev/mmcblk0p15...

while the correct list of partitions on mmcblk0 for Gear 2 is:
[    1.436651]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since many (most?) mvebu platforms have NAND or SPI flashes, it makes
sense to have CONFIG_MTD_BLOCK=y in mvebu_v7_defconfig. The vast
majority of the other ARM defconfigs have it enabled, including
mvebu_v5_defconfig.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1415873489-22446-1-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

This commit enables user-space access to I2C bus using char device.
Signed-off-by: NMarcin Wojtas <mw@semihalf.com>
Reviewed-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1415980652-7429-6-git-send-email-mw@semihalf.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

In the recent update of mvebu_v7_defconfig a config that enables sdhci-pxav3
driver, that supports SDHCI interface of Armada 38x SoC, disappeared.

This commit enables CONFIG_MMC_SDHCI_PXAV3 back.
Signed-off-by: NMarcin Wojtas <mw@semihalf.com>
Reviewed-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Fixes fc9fa871 ("ARM: mvebu: update v7 defconfig with useful options")
Link: https://lkml.kernel.org/r/1415980652-7429-2-git-send-email-mw@semihalf.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

This patch was generated by running 'make tegra_defconfig' followed by
'make savedefconfig' with the v3.18-rc1 tag checked out. Two values go
away: CONFIG_SCSI is selected by CONFIG_ATA and CONFIG_SCSI_MULTI_LUN
was removed.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Merge tag 'sti-defconfig-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/defconfig

Pull "STi defconfig updates for v3.19" from Maxime Coquelin:

Highlights:
-----------
 - Enable ST EHCI and OHCI USB drivers
 - Enable STiH416 and STiH415 USB2 PHY driver

* tag 'sti-defconfig-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: multi_v7_defconfig: Enable stih415/6 usb2 phy driver.
  ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This allows booting the kernel with systemd-based root file systems.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig

Pull "Keystone config updates for 3.19" from Santosh Shilimkar:

	- Enable PCIE controller and related options
	- Enable MDIO and ethernet phy options
	- Enable DSP IRQCHIP option

* tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: keystone: defconfig: add options to enable PCI controller
  ARM: keystone: add pcie related options
  ARM: keystone_defconfig: enable mdio and marvell eth phys
  ARM: keystone_defconfig: enable dsp irq and gpio support
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable Broadcom Cygnus platform support in multi_v7_defconfig
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

remove menu "Broadcom Mobile SoC Selection"
This requires:
- selecting ARCH_BCM_MOBILE based on SoC selections
- fixup multi_v7_defconfig to work with new menu levels of mach-bcm.
Signed-off-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull "mvebu defconfig changes for v3.19" from Jason Cooper"

 - Add options for DLink DIR665
 - Add Armada 370 simple-card audio option
 - Add mv88E6171 switch driver option

* tag 'mvebu-defconfig-3.19' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: defconfig: Enable the mv88E6171 switch driver
  ARM: mvebu: update mvebu_v7_defconfig for Armada 370 audio
  ARM: config: Add DLINK DIR665 options to multi_v5_defconfig
  ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfig
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull "ARM: HiX5HD2: config update for 3.19" from Wei Xu:

- Enable GMAC, GPIO, Reset, USB, MMC and SATA on HiX5HD2

* tag 'hix5hd2-config-for-3.19' of git://github.com/hisilicon/linux-hisi:
  ARM: hisi_defconfig: add driver support for hix5hd2
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-defconfig-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Pull "Renesas ARM Based SoC Defconfig Updates for v3.19" from Simon Horman:

* Enable AK4642, Audo DMAC peri peri and R-Car DMAC in shmobile defconrig
* Enable PM Runtime in ape6evm defconfig

* tag 'renesas-defconfig-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: multiplatform: add AK4642 support on defconfig
  ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig
  ARM: shmobile: multiplatform: add R-Car DMAC support on defconfig
  ARM: shmobile: ape6evm: Enable PM Runtime in defconfig
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This driver is used by the ehci / ohci usb controllers on stih415/6 SoCs.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

Enable the ehci and ohci drivers in the multi_v7_defconfig so that
the USB controllers on stih41x work by default.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

This switch is used by the 370-rd. Enable it and support for
fixed-link phy configuration.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1415214121-29286-4-git-send-email-andrew@lunn.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>

Now that the Armada 370 DB audio complex is represented fully in
Device Tree using the simple-card DT binding, this commit updates
mvebu_v7_defconfig to no longer select the Armada 370 DB audio machine
driver, and instead select the appropriate audio controller and codec
drivers.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1414512524-24466-7-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by: NJason Cooper <jason@lakedaemon.net>

AK4642 is well used audio codec on Renesas reference board
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This patch enables PCI controller driver for Keystone SoCs by
default.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

Now that Keystone PCI controller is merged, add pcie related options
by default for keystone architecture so that driver can be enabled in
the build.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

Enable MDIO support for Keystone 2 SoCs and also
enable Marvell Ethernet PHYs support for Keystone 2 K2H EVM
which has two 1G Marvell 88E1111-B2 PHYs installed.

For more information see:
- http://www.advantech.com/Support/TI-EVM/EVMK2HX.aspxSigned-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

Enable DSP IRQ controller and GPIOs support for Keystone 2.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

This is consistent with other shmobile defconfigs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable building of the switch chip driver and the wireless driver
needed by the DLINK DIR665
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Cc: arm@kernel.org
Link: https://lkml.kernel.org/r/1414793613-11798-5-git-send-email-andrew@lunn.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>

Enable building of the switch chip driver and the wireless driver
needed by the DLINK DIR665
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1414793613-11798-4-git-send-email-andrew@lunn.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>