Use lowercase names of quota functions instead of old uppercase ones.
Signed-off-by: NJan Kara <jack@suse.cz>

Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJames Morris <jmorris@namei.org>

I case we failed to allocate memory for inode when creating it, we did not
properly free block already allocated for this inode. Move memory allocation
before the block allocation which fixes this issue (thanks for the idea go to
Ingo Oeser <ioe-lkml@rameria.de>). Also remove a few superfluous
initializations already done in udf_alloc_inode().
Reviewed-by: NIngo Oeser <ioe-lkml@rameria.de>
Signed-off-by: NJan Kara <jack@suse.cz>

A memory allocation inside alloc_mutex must not recurse back into the
filesystem itself because that leads to lock inversion between iprune_mutex and
alloc_mutex (and thus to deadlocks - see traces below). alloc_mutex is actually
needed only to update allocation statistics in the superblock so we can drop it
before we start allocating memory for the inode.

tar           D ffff81015b9c8c90     0  6614   6612
 ffff8100d5a21a20 0000000000000086 0000000000000000 00000000ffff0000
 ffff81015b9c8c90 ffff81015b8f0cd0 ffff81015b9c8ee0 0000000000000000
 0000000000000003 0000000000000000 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
 [<ffffffff803c1bef>] mutex_lock+0xa/0xb
 [<ffffffff8027f8c2>] shrink_icache_memory+0x38/0x200
 [<ffffffff80257742>] shrink_slab+0xe3/0x15b
 [<ffffffff802579db>] try_to_free_pages+0x221/0x30d
 [<ffffffff8025657e>] isolate_pages_global+0x0/0x31
 [<ffffffff8025324b>] __alloc_pages_internal+0x252/0x3ab
 [<ffffffff8026b08b>] cache_alloc_refill+0x22e/0x47b
 [<ffffffff8026ae37>] kmem_cache_alloc+0x3b/0x61
 [<ffffffff8026b15b>] cache_alloc_refill+0x2fe/0x47b
 [<ffffffff8026b34e>] __kmalloc+0x76/0x9c
 [<ffffffffa00751f2>] :udf:udf_new_inode+0x202/0x2e2
 [<ffffffffa007ae5e>] :udf:udf_create+0x2f/0x16d
 [<ffffffffa0078f27>] :udf:udf_lookup+0xa6/0xad
...
kswapd0       D ffff81015b9d9270     0   125      2
 ffff81015b903c28 0000000000000046 ffffffff8028cbb0 00000000fffffffb
 ffff81015b9d9270 ffff81015b8f0cd0 ffff81015b9d94c0 000000000271b490
 ffffe2000271b458 ffffe2000271b420 ffffe20002728dc8 ffffe20002728d90
Call Trace:
 [<ffffffff8028cbb0>] __set_page_dirty+0xeb/0xf5
 [<ffffffff8025403a>] get_dirty_limits+0x1d/0x22f
 [<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
 [<ffffffff803c1bef>] mutex_lock+0xa/0xb
 [<ffffffffa0073f58>] :udf:udf_bitmap_free_blocks+0x47/0x1eb
 [<ffffffffa007df31>] :udf:udf_discard_prealloc+0xc6/0x172
 [<ffffffffa007875a>] :udf:udf_clear_inode+0x1e/0x48
 [<ffffffff8027f121>] clear_inode+0x6d/0xc4
 [<ffffffff8027f7f2>] dispose_list+0x56/0xee
 [<ffffffff8027fa5a>] shrink_icache_memory+0x1d0/0x200
 [<ffffffff80257742>] shrink_slab+0xe3/0x15b
 [<ffffffff80257e93>] kswapd+0x346/0x447
...
Reported-by: NTibor Tajti <tibor.tajti@gmail.com>
Reviewed-by: NIngo Oeser <ioe-lkml@rameria.de>
Signed-off-by: NJan Kara <jack@suse.cz>

replace all:
	little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) +
	                                    expression_in_cpu_byteorder);
with:
	leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder);
sparse didn't generate any new warning with this patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com
Signed-off-by: NJan Kara <jack@suse.cz>

There's really no reason to keep udf headers in include/linux as they're
not used by anything but fs/udf/.

This patch merges most of include/linux/udf_fs_i.h into fs/udf/udf_i.h,
include/linux/udf_fs_sb.h into fs/udf/udf_sb.h and
include/linux/udf_fs.h into fs/udf/udfdecl.h.

The only thing remaining in include/linux/ is a stub of udf_fs_i.h
defining the four user-visible udf ioctls.  It's also moved from
unifdef-y to headers-y because it can be included unconditionally now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

cache UDF_I(struct inode *) return values when there are
at least 2 uses in one function
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix coding style errors found by checkpatch:
- assignments in if conditions
- braces {} around single statement blocks
- no spaces after commas
- printks without KERN_*
- lines longer than 80 characters
- spaces between "type *" and variable name

before: 192 errors, 561 warnings, 8987 lines checked
after: 1 errors, 38 warnings, 9468 lines checked
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remove macros:
- UDF_SB_PARTMAPS
- UDF_SB_PARTTYPE
- UDF_SB_PARTROOT
- UDF_SB_PARTLEN
- UDF_SB_PARTVSN
- UDF_SB_PARTNUM
- UDF_SB_TYPESPAR
- UDF_SB_TYPEVIRT
- UDF_SB_PARTFUNC
- UDF_SB_PARTFLAGS
- UDF_SB_VOLIDENT
- UDF_SB_NUMPARTS
- UDF_SB_PARTITION
- UDF_SB_SESSION
- UDF_SB_ANCHOR
- UDF_SB_LASTBLOCK
- UDF_SB_LVIDBH
- UDF_SB_LVID
- UDF_SB_UMASK
- UDF_SB_GID
- UDF_SB_UID
- UDF_SB_RECORDTIME
- UDF_SB_SERIALNUM
- UDF_SB_UDFREV
- UDF_SB_FLAGS
- UDF_SB_VAT
- UDF_UPDATE_UDFREV
- UDF_SB_FREE
and open code them

convert UDF_SB_LVIDIU macro to udf_sb_lvidiu function

rename some struct udf_sb_info fields:
- s_volident to s_volume_ident
- s_lastblock to s_last_block
- s_lvidbh to s_lvid_bh
- s_recordtime to s_record_time
- s_serialnum to s_serial_number;
- s_vat to s_vat_inode;
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu>
Cc: Jan Kara <jack@suse.cz>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes up sources after conversion by Lindent.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch converts UDF coding style to kernel coding style using Lindent.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add checking for granted memory for inode data at the moment of its
creation.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversions from kmalloc+memset to kzalloc.
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I saw an oops down this path when trying to create a new file on a UDF
filesystem which was internally marked as readonly, but mounted rw:

udf_create
        udf_new_inode
                new_inode
                        alloc_inode
                        	udf_alloc_inode
                udf_new_block
                        returns EIO due to readonlyness
                iput (on error)
                        udf_put_inode
                                udf_discard_prealloc
                                        udf_next_aext
                                                udf_current_aext
                                                        udf_get_fileshortad
                                                                OOPS

the udf_discard_prealloc() path was examining uninitialized fields of the
udf inode.

udf_discard_prealloc() already has this code to short-circuit the discard
path if no extents are preallocated:

        if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ||
                inode->i_size == UDF_I_LENEXTENTS(inode))
        {
                return;
        }

so if we initialize UDF_I_LENEXTENTS(inode) = 0 earlier in udf_new_inode,
we won't try to free the (not) preallocated blocks, since this will match
the i_size = 0 set when the inode was initialized.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes pointers to the defunct UDF mailing list.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!