- 20 9月, 2006 22 次提交
-
-
由 Martin Schwidefsky 提交于
Avoid using #undef in unistd.h. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If do_signal() gets called several times before returning to user space and no signal is pending (e.g. cancelled by a debugger) syscall restart handling could be done several times. This would change the user space PSW to an address prior to the syscall instruction. Fix this by making sure that syscall restart handling is only done once. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use do { } while (0) constructs instead of empty defines to avoid subtle compile bugs. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
It is now possible to specify a ccw/fcp dump device which is used to automatically create a system dump in case of a kernel panic. The dump device can be configured under /sys/firmware/dump. In addition it is now possible to specify a ccw/fcp device which is used for the next reboot of Linux. The reipl device can be configured under /sys/firmware/reipl. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Add casts to avoid compiler warnings. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Correct some comments in the hypervisor filesystem. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Move initrd if the bitmap of the bootmem allocator would overwrite it. In addition this patch sets the default size and address of the initrd to 0. Therefore all boot loaders must set the initrd size and address correctly. This is especially relevant for ftp boot via HMC/SE, where this change requires a special patch file entry in the .ins file which sets these two values contained at address 0x10408 and 0x10410. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Grundy 提交于
Signed-off-by: NMichael Grundy <grundym@us.ibm.com> Signed-off-by: NDavid Wilder <dwilder@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ralph Wuerthner 提交于
Allow the user space to send extended cprb messages directly to the PCIXCC / CEX2C cards. This allows the CCA library to construct special crypto requests that use "secure" keys that are stored on the card. Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The Makefile and Kconfig changes should be obvious. The monolithic build option is there to create an old-style z90crypt module for backward compatability to older distributions. Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The user space interface of the zcrypt device driver implements the old user space interface as defined by the old z90crypt driver. Everything is there, the /dev/z90crypt misc character device, all the lovely ioctls and the /proc file. Even writing to the z90crypt proc file to configure the crypto device still works. It stands to reason to remove the proc write function someday since a much cleaner configuration via the sysfs is now available. The ap bus device drivers register crypto cards to the zcrypt user space interface. The request router of the user space interface picks one of the registered cards based on the predicted latency for the request and calls the driver via a callback found in the zcrypt_ops of the device. The request router only knows which operations the card can do and the minimum / maximum number of bits a request can have. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add a bus for the adjunct processor interface. Up to 64 devices can be connect to the ap bus interface, each device with 16 domains. That makes 1024 message queues. The interface is asynchronous, the answer to a message sent to a queue needs to be received at some later point in time. Unfortunately the interface does not provide interrupts when a message reply is pending. So the ap bus needs to implement some fancy polling, each active queue is polled once per 1/HZ second or continuously if an idle cpus exsists and the poll thread is activ (see poll_thread parameter). The ap bus uses the sysfs path /sys/bus/ap and has two bus attributes, ap_domain and config_time. The ap_domain selects one of the 16 domains to be used for this system. This limits the maximum number of ap devices to 64. The config_time attribute contains the number of seconds between two ap bus scans to find new devices. The ap bus uses the modalias entries of the form "ap:tN" to autoload the ap driver for hardware type N. Currently known types are: 3 - PCICC, 4 - PCICA, 5 - PCIXCC, 6 - CEX2A and 7 - CEX2C. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The z90crypt driver has served its term. It is replaced by the shiny new zcrypt device driver. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add EX_TABLE helper macro to simplify creation of inline assembly exception table entries. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Linus Torvalds 提交于
Ahoy, all land-lubbers, test me out right smartly! Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4] fib_trie: missing ntohl() when calling fib_semantic_match() [NETFILTER]: xt_quota: add missing module aliases [ATM]: [he] don't hold the device lock when upcalling
-
由 Al Viro 提交于
fib_trie.c::check_leaf() passes host-endian where fib_semantic_match() expects (and stores into) net-endian. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add missing aliases for ipt_quota and ip6t_quota to make autoload work. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
This can create a deadlock/lock ordering problem with other layers that want to use the transmit (or other) path of the card at that time. Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/pub/linux/nfs-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6: NFS: Fix nfs_page use after free issues in fs/nfs/write.c NFSv4: Fix incorrect semaphore release in _nfs4_do_open() NFS: Fix Oopsable condition in nfs_readpage_sync()
-
- 19 9月, 2006 14 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Linus Torvalds 提交于
This reverts commits 11012d41 and 40dd2d20, which allowed us to use the MMIO accesses for PCI config cycles even without the area being marked reserved in the e820 memory tables. Those changes were needed for EFI-environment Intel macs, but broke some newer Intel 965 boards, so for now it's better to revert to our old 2.6.17 behaviour and at least avoid introducing any new breakage. Andi Kleen has a set of patches that work with both EFI and the broken Intel 965 boards, which will be applied once they get wider testing. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: [MTD] Use SEEK_{SET,CUR,END} instead of hardcoded values in mtdchar lseek() MTD: Fix bug in fixup_convert_atmel_pri [JFFS2][SUMMARY] Fix a summary collecting bug. [PATCH] [MTD] DEVICES: Fill more device IDs in the structure of m25p80 MTD: Add lock/unlock operations for Atmel AT49BV6416 MTD: Convert Atmel PRI information to AMD format fs/jffs2/xattr.c: remove dead code [PATCH] [MTD] Maps: Add dependency on alternate probe methods to physmap [PATCH] MTD: Add Macronix MX29F040 to JEDEC [MTD] Fixes of performance and stability issues in CFI driver. block2mtd.c: Make kernel boot command line arguments work (try 4) [MTD NAND] Fix lookup error in nand_get_flash_type() remove #error on !PCI from pmc551.c MTD: [NAND] Fix the sharpsl driver after breakage from a core conversion [MTD] NAND: OOB buffer offset fixups make fs/jffs2/nodelist.c:jffs2_obsolete_node_frag() static [PATCH] [MTD] NAND: fix dead URL in Kconfig
-
由 Dave Kleikamp 提交于
Fix a performance degradation introduced in 2.6.17. (30% degradation running dbench with 16 threads) Commit 21730eed, which claims to make EXT2_DEBUG work again, moves the taking of the kernel lock out of debug-only code in ext2_count_free_inodes and ext2_count_free_blocks and into ext2_statfs. The same problem was fixed in ext3 by removing the lock completely (commit 5b116879) Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matthew Wilcox 提交于
Remove definitions of PAGE_* from the user view Delete unnecessary comments referring to the size of pages Only include <asm-generic> if we're in __KERNEL__ Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Geert Uytterhoeven 提交于
Fix 'make headers_check' on m68k Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
(And reset it on new thread creation) It turns out that eflags is important to save and restore not just because of iopl, but due to the magic bits like the NT bit, which we don't want leaking between different threads. Tested-by: NMike Galbraith <efault@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ATM] CLIP: Do not refer freed skbuff in clip_mkip(). [NET]: Drop tx lock in dev_watchdog_up [PACKET]: Don't truncate non-linear skbs with mmaped IO [NET]: Mark frame diverter for future removal. [NETFILTER]: Add secmark headers to header-y [ATM]: linux-atm-general mailing list is subscribers only [ATM]: [he] when transmit fails, unmap the dma regions [TCP] tcp-lp: update information to MAINTAINERS [TCP] tcp-lp: bug fix for oops in 2.6.18-rc6 [BRIDGE]: random extra bytes on STP TCN packet [IPV6]: Accept -1 for IPV6_TCLASS [IPV6]: Fix tclass setting for raw sockets. [IPVS]: remove the debug option go ip_vs_ftp [IPVS]: Make sure ip_vs_ftp ports are valid [IPVS]: auto-help for ip_vs_ftp [IPVS]: Document the ports option to ip_vs_ftp in kernel-parameters.txt [TCP]: Turn ABC off. [NEIGH]: neigh_table_clear() doesn't free stats
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Fix regression in sys_getdomainname() [OPENPROMIO]: Handle current_node being NULL correctly.
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3815/1: headers_install support for ARM [ARM] 3794/1: S3C24XX: do not defined set_irq_wake when no CONFIG_PM [ARM] 3793/1: S3C2412: fix wrong serial info struct [ARM] 3780/1: Fix iop321 cpuid [ARM] 3786/1: pnx4008: update defconfig [ARM] 3785/1: S3C2412: Fix idle code as default uses wrong clocks [ARM] 3784/1: S3C2413: fix config for MACH_S3C2413/MACH_SMDK2413
-
- 18 9月, 2006 4 次提交
-
-
由 Ralph Siemsen 提交于
Move kernel-only #includes into #ifdef __KERNEL__, so that headers_install target can be used on ARM. Signed-off-by: NRalph Siemsen <ralphs@netwinder.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andy Walker 提交于
This patch corrects the buffer length checking in the sys_getdomainname() implementation for sparc/sparc64. Signed-off-by: NAndy Walker <andy@puszczka.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
In clip_mkip(), skb->dev is dereferenced after clip_push(), which frees up skb. Advisory: AD_LAB-06009 (<adlab@venustech.com.cn>). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Do not define set_irq_wake as a real function if the CONFIG_PM option is not set. Fixes bug reported by Thomas Gleixner. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-