- 03 7月, 2011 40 次提交
-
-
由 Dan Williams 提交于
* Rename scic_sds_stp_request to isci_stp_request * Remove the unused fields and union indirection Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
the dma_pool interface is optimized for object_size << page_size which is not the case with isci_request objects and the dma_pool routines show up in the top of the profile. The old io_request_table which tracked whether tci slots were in-flight or not is replaced with an IREQ_ACTIVE flag per request. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Combine three bools into one unsigned long 'flags'. Doesn't increase the request size due to packing. (to do: optimize the structure layout). Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The tci_pool tracks our outstanding command slots which are also the 'index' portion of our tags. Grabbing the tag early in ->lldd_execute_task let's us drop the isci_host_can_queue() and ->was_tag_assigned_by_user infrastructure. ->was_tag_assigned_by_user required the task context to be duplicated in request-local buffer. With the tci established early we can build the task_context directly into its final location and skip a memcpy. With the task context buffer at a known address at request construction we have the opportunity/obligation to also fix sgl handling. This rework feels like it belongs in another patch but the sgl handling and task_context are too intertwined. 1/ fix the 'ab' pair embedded in the task context to point to the 'cd' pair in the task context (previously we were prematurely linking to the staging buffer). 2/ fix the broken iteration of pio sgls that assumes all sgls are relative to the request, and does a dangerous looking reverse lookup of physical address to virtual address. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jeff Skirvin 提交于
When the remote device transitions to a not-ready state because of an NCQ error condition, all outstanding requests to that device are terminated and completed to libsas on the normal path. The device then waits for a READ LOG EXT command to issue on the task management path. Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Instead of duplicating the smp request buffer reuse the one provided by libsas. This future proofs the driver to support arbitrarily large smp requests, and shrinks the request structure size by ~700 bytes. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
One bug and a cleanup: 1/ Fix cases where we were unmapping invalid addresses (smp requests were being unmapped) [ 604.662770] ------------[ cut here ]------------ [ 604.668026] WARNING: at lib/dma-debug.c:800 check_unmap+0x418/0x740() [ 604.675315] Hardware name: SandyBridge Platform [ 604.680465] isci 0000:03:00.0: DMA-API: device driver tries to free an invalid DMA memory address 2/ The unmap routine is too large to be an inline function, and isci_request_io_request_get_next_sge is unused. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Due to a typo we currently copy way too much when copying over the response data, but since a request is likely backed by a full page allocation we don't corrupt live data. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Now that we have upleveled device reassignment protection to the isci_remote_device reference count we no longer need this level of self-defense. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
We have unsafe references to remote devices that are notified to disappear at lldd_dev_gone. In order to clean this up we need a single canonical source for device lookups and stable references once a lookup succeeds. Towards that end guarantee that domain_device.lldd_dev is NULL as soon as we start the process of stopping a device. Any code path that wants to safely lookup a remote device must do so through task->dev->lldd_dev (isci_lookup_device()). For in-flight references outside of scic_lock we need reference counting to ensure that the device is not recycled before we are done with it. Simplify device back references to just scic_sds_request.target_device which is now the only permissible internal reference that is maintained relative to the reference count. There were two occasions where we wanted new i/o's to be treated as SAS_TASK_UNDELIVERED but where the domain_dev->lldd_dev link is still intact. Introduce a 'gone' flag to prevent i/o while waiting for libsas to take action on the port down event. One 'core' leftover is that we currently call scic_remote_device_destruct() from isci_remote_device_deconstruct() which is called when the 'core' says the device is stopped. It would be more natural for the final put to trigger isci_remote_device_deconstruct() but this implementation is deferred as it requires other changes. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Rather than return an error code and update a pointer that was passed by reference just return the request object directly (or null if allocation failed). Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
A tag is a 16 bit number where the upper four bits is a sequence number and the remainder is the task context index (tci). Sanitize the macro names and shave 256-bytes out of scic_sds_controller by reducing the size of io_request_sequence. scic_sds_io_tag_construct --> ISCI_TAG scic_sds_io_tag_get_sequence --> ISCI_TAG_SEQ scic_sds_io_tag_get_index() --> ISCI_TAG_TCI scic_sds_io_sequence_increment() [delete / open code] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jeff Skirvin 提交于
In the situation where a termination of an I/O times-out, make sure that the linkage from the request to the task is severed completely. Also make sure that the selection of tasks to terminate occurs under scic_lock. Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jeff Skirvin 提交于
Requests that fail at start because of a reset pending condition must be set to complete in order to allow for later cleanup. Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jeff Skirvin 提交于
There are situations with slow expanders in which a first attempt to execute an SMP request will fail with a timeout. Immediate subsequent retries will generally succeed. This change makes sure SMP I/O failures are immediately failed to libsas so that retries happen with no discovery process timeout delay. Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Edmund Nadolski 提交于
Additional state machine cleanups: o Remove static functions sci_state_machine_exit_state() and sci_state_machine_enter_state() o Combines sci_base_state_machine_construct() and sci_base_state_machine_start() into a single function, sci_init_sm() o Remove sci_base_state_machine_stop() which is unused. o Kill state_machine.[ch] Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com> [fixed too large to inline functions] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Edmund Nadolski 提交于
This cleans up several areas of the state machine mechanism: o Rename sci_base_state_machine_change_state to sci_change_state o Remove sci_base_state_machine_get_state function o Rename 'state_machine' struct member to 'sm' in client structs o Shorten the name of request states o Shorten state machine state names as follows: SCI_BASE_CONTROLLER_STATE_xxx to SCIC_xxx SCI_BASE_PHY_STATE_xxx to SCI_PHY_xxx SCIC_SDS_PHY_STARTING_SUBSTATE_xxx to SCI_PHY_SUB_xxx SCI_BASE_PORT_STATE_xxx to SCI_PORT_xxx and SCIC_SDS_PORT_READY_SUBSTATE_xxx to SCI_PORT_SUB_xxx SCI_BASE_REMOTE_DEVICE_STATE_xxx to SCI_DEV_xxx SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_STP_DEV_xxx SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_SMP_DEV_xxx SCIC_SDS_REMOTE_NODE_CONTEXT_xxx_STATE to SCI_RNC_xxx Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dave Jiang 提交于
Newer gcc's are better at identifying "set, but not used" variables. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dave Jiang 提交于
It doesn't look like there is any reason to do a kmalloc. We can do the byte swap in place and avoid the allocation. This allow us to remove a kmalloc and a memcpy. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Now that any given object type only has one state_machine we can use container_of() to get back to the given state machine owner. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
With these handlers gone the rest of the state handler infrastructure is removed. Added some WARN_ONCEs where previously we would cause NULL pointer dereferences or silently run handlers from a previous state. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Unlike the other conversions this only updates scic_sds_io_request_tc_completion() to call the old state handlers directly (with less verbose names). This was done for future patch readability, the implementations have only minor differences for different completion codes. Without a reference to the function name it would be difficult to dicern which state is being updated. Considered changing the order to look up the completion code before the state but that was not a clean conversion either. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Unify the implementation in scic_sds_io_request_frame_handler and kill the state handler. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Piotr Sawicki 提交于
Unify the implementation in scic_sds_request_start and kill the state handler. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com> [remove scic_sds_request_constructed_state_start_handler] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Unify the implementation in scic_sds_io_request_terminate and kill the state handler. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Remove usage of the request substate machine for stp requests, and kill the request substate infrastructure. Similar to the previous conversions this adds the substates to the primary state machine and arranges for the 'started' state to transition to the proper stp substate. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Remove usage of the request substate machine for smp requests identified by: task->task_proto == SAS_PROTOCOL_SMP While merging over the smp_request infrastructure noticed that all the assign buffer implementations are now equal, so moved it to scic_sds_general_request_construct. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Remove usage of the request substate machine for ssp task management requests identified by: ireq->ttype == tmf_task && dev->dev_type == SAS_END_DEV; The only routine that checks the base 'started' state is scic_sds_io_request_tc_completion which calls the substate machine handler if we are not in the 'started' state or we are 'started' and no substate machine is defined. This routine requires no conversion because we have transitioned out of 'started' and the substate routine will be called naturally as a result. There are also no side effects of this conversion on exiting the 'started', state because it only stops the substate machine, which is no longer relevant for this transaction type. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
* Move port configuration agent implementation * Merge core/scic_sds_port.[ch] into port.[ch] Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
* Consolidate tiny header files * Move files out of core/ (drop core/scic_sds_ prefix) * Merge core/scic_sds_request.[ch] into request.[ch] * Cleanup request.c namespace (clean forward declarations and global namespace pollution) Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Now that the data structures are unified unify the implementation in host.[ch] and cleanup namespace pollution. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
cross driver constants are spread out over multiple header files, consolidate them into isci.h, and push some includes out to the source files that need them. TODO: remove SCI_MODE_SIZE infrastructure. TODO: task.h is full of inlines that are too large Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Make scic_sds_request a proper member of isci_request. Also let's us get rid of the dma pool object size tracking since we now know that all requests are sizeof(isci_request). While cleaning up the construct routine incidentally replaced SCI_FIELD_OFFSET with offsetof. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Final elimination of the anonymous data at the end of the request structure. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Towards unifying request objects we need all members to be defined in the object and not carved out of anonymous buffer space. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dave Jiang 提交于
No need for wrappers, just access sas_task directly. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Artur Wojcik 提交于
Make it explicit that isci_host and scic_sds_controller are one in the same object. Signed-off-by: NArtur Wojcik <artur.wojcik@intel.com> [removed ->ihost back pointer] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dave Jiang 提交于
The struct smp_request data structure has be fixed up for Linux consumption. This probably should go to scsi/sas.h eventually. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dave Jiang 提交于
Fixup of SSP command IU and SSP task IU to something that looks like Linux Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Maciej Patelczyk 提交于
The 'struct sci_base_object' was removed from the struct scic_sds_request and was replaced by a pointer to struct isci_request. Signed-off-by: NMaciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-