- 17 5月, 2019 1 次提交
-
-
由 Herbert Xu 提交于
The opaque type rhash_lock_head should not be marked with __rcu because it can never be dereferenced. We should apply the RCU marking when we turn it into a pointer which can be dereferenced. This patch does exactly that. This fixes a number of sparse warnings as well as getting rid of some unnecessary RCU checking. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2019 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2019-05-16 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a use after free in __dev_map_entry_free(), from Eric. 2) Several sockmap related bug fixes: a splat in strparser if it was never initialized, remove duplicate ingress msg list purging which can race, fix msg->sg.size accounting upon skb to msg conversion, and last but not least fix a timeout bug in tcp_bpf_wait_data(), from John. 3) Fix LRU map to avoid messing with eviction heuristics upon syscall lookup, e.g. map walks from user space side will then lead to eviction of just recently created entries on updates as it would mark all map entries, from Daniel. 4) Don't bail out when libbpf feature probing fails. Also various smaller fixes to flow_dissector test, from Stanislav. 5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
The tcp_bpf_wait_data() routine needs to check timeo != 0 before calling sk_wait_event() otherwise we may see unexpected stalls on receiver. Arika did all the leg work here I just formatted, posted and ran a few tests. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: NArika Chen <eaglesora@gmail.com> Suggested-by: NArika Chen <eaglesora@gmail.com> Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Stanislav Fomichev 提交于
In case we are not running in a namespace (which we don't do by default), let's try to detach the bpf program that we use for eth_get_headlen tests. Fixes: 0905beec ("selftests/bpf: run flow dissector tests in skb-less mode") Signed-off-by: NStanislav Fomichev <sdf@google.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Stanislav Fomichev 提交于
Otherwise, in case of an error, everything gets mushed together. Fixes: a5cb3346 ("selftests/bpf: make flow dissector tests more extensible") Signed-off-by: NStanislav Fomichev <sdf@google.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Stanislav Fomichev 提交于
Otherwise libbpf is unusable from unprivileged process with kernel.kernel.unprivileged_bpf_disabled=1. All I get is EPERM from the probes, even if I just want to open an ELF object and look at what progs/maps it has. Instead of dying on probes, let's just pr_debug the error and try to continue. Signed-off-by: NStanislav Fomichev <sdf@google.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Eric Dumazet 提交于
It is illegal to change arbitrary fields in skb_shared_info if the skb is cloned. Before calling skb_zcopy_clear() we need to ensure this rule, therefore we need to move the test from sk_stream_alloc_skb() to sk_wmem_free_skb() Fixes: 4f661542 ("tcp: fix zerocopy and notsent_lowat issues") Signed-off-by: NEric Dumazet <edumazet@google.com> Diagnosed-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Just hook get_link to standard ethtool_op_get_link, nothing special needed at this point. Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
The fact that the Tx SG flag is fixed to 'on' is only an oversight. Non-SG mode is also supported. Fix this by allowing to turn SG off. Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
For the unlikely case of TxBD extensions (i.e. ptp) the driver tries to unmap the tx_swbd corresponding to the extension, which is bogus as it has no buffer attached. Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 5月, 2019 30 次提交
-
-
由 Pieter Jansen van Vuuren 提交于
Add rcu locks when accessing netdev when processing route request and tunnel keep alive messages received from hardware. Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload") Fixes: 856f5b13 ("nfp: flower vxlan neighbour keep-alive") Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
BUG: unable to handle kernel paging request at ffffffffa018f000 PGD 3270067 P4D 3270067 PUD 3271063 PMD 2307eb067 PTE 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 4138 Comm: modprobe Not tainted 5.1.0-rc7+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ppp_register_compressor+0x3e/0xd0 [ppp_generic] Code: 98 4a 3f e2 48 8b 15 c1 67 00 00 41 8b 0c 24 48 81 fa 40 f0 19 a0 75 0e eb 35 48 8b 12 48 81 fa 40 f0 19 a0 74 RSP: 0018:ffffc90000d93c68 EFLAGS: 00010287 RAX: ffffffffa018f000 RBX: ffffffffa01a3000 RCX: 000000000000001a RDX: ffff888230c750a0 RSI: 0000000000000000 RDI: ffffffffa019f000 RBP: ffffc90000d93c80 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0194080 R13: ffff88822ee1a700 R14: 0000000000000000 R15: ffffc90000d93e78 FS: 00007f2339557540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa018f000 CR3: 000000022bde4000 CR4: 00000000000006f0 Call Trace: ? 0xffffffffa01a3000 deflate_init+0x11/0x1000 [ppp_deflate] ? 0xffffffffa01a3000 do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If ppp_deflate fails to register in deflate_init, module initialization failed out, however ppp_deflate_draft may has been regiestred and not unregistered before return. Then the seconed modprobe will trigger crash like this. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NGuillaume Nault <gnault@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luca Ceresoli 提交于
Errors are negative numbers. Using %u shows them as very large positive numbers such as 4294967277 that don't make sense. Use the %d format instead, and get a much nicer -19. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Fixes: b48e0bab ("net: macb: Migrate to devm clock interface") Fixes: 93b31f48 ("net/macb: unify clock management") Fixes: 421d9df0 ("net/macb: merge at91_ether driver into macb driver") Fixes: aead88bd ("net: ethernet: macb: Add support for rx_clk") Fixes: f5473d1d ("net: macb: Support clock management for tsu_clk") Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Currently, nla_put_iflink() doesn't put the IFLA_LINK attribute when iflink == ifindex. In some cases, a device can be created in a different netns with the same ifindex as its parent. That device will not dump its IFLA_LINK attribute, which can confuse some userspace software that expects it. For example, if the last ifindex created in init_net and foo are both 8, these commands will trigger the issue: ip link add parent type dummy # ifindex 9 ip link add link parent netns foo type macvlan # ifindex 9 in ns foo So, in case a device puts the IFLA_LINK_NETNSID attribute in a dump, always put the IFLA_LINK attribute as well. Thanks to Dan Winship for analyzing the original OpenShift bug down to the missing netlink attribute. v2: change Fixes tag, it's been here forever, as Nicolas Dichtel said add Nicolas' ack v3: change Fixes tag fix subject typo, spotted by Edward Cree Analyzed-by: NDan Winship <danw@redhat.com> Fixes: d8a5ec67 ("[NET]: netlink support for moving devices between network namespaces.") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunjian Wang 提交于
The error print within mlx4_flow_steer_promisc_add() should be a info print. Fixes: 592e49dd ('net/mlx4: Implement promiscuous mode with device managed flow-steering') Signed-off-by: NYunjian Wang <wangyunjian@huawei.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Samuel clearly hasn't been working on this in many years and patches getting to the wireless list are just being ignored entirely now. Mark the subsystem as orphan to reflect the current state and revert back to the netdev list so at least some fixes can be picked up by Dave. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y, CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a functional state where the mock-up driver is registered. Turns out that we are not descending into drivers/net/dsa/ unconditionally, and we won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up mdio device registration. Reported-by: NJiri Pirko <jiri@resnulli.us> Fixes: 40013ff2 ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@gmail.com> Tested-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Commit c7d13c8f ("tcp: properly track retry time on passive Fast Open") sets the start of SYNACK retransmission time on passive Fast Open in "retrans_stamp". However the timestamp is not reset upon the handshake has completed. As a result, future data packet retransmission may not update it in tcp_retransmit_skb(). This may lead to socket aborting earlier unexpectedly by retransmits_timed_out() since retrans_stamp remains the SYNACK rtx time. This bug only manifests on passive TFO sender that a) suffered SYNACK timeout and then b) stalls on very first loss recovery. Any successful loss recovery would reset the timestamp to avoid this issue. Fixes: c7d13c8f ("tcp: properly track retry time on passive Fast Open") Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio updates from Michael Tsirkin: - enable packed ring support for s390 - several fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: enable packed ring virtio/s390: DMA support for virtio-ccw virtio/s390: use vring_create_virtqueue virtio/virtio_ring: do some comment fixes vhost-scsi: remove incorrect memory barrier tools/virtio/ringtest: Remove bogus definition of BUG_ON() virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed
-
由 Linus Torvalds 提交于
Commit f1b5618e ("vfs: Add a sample program for the new mount API") added sample programs that get built during the kernel build, but then cause 'git status' to worry about whether the resulting binaries should be managed by git. Tell git not to worry, and to ignore the sample binaries. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull more parisc updates from Helge Deller: "Two small enhancements, which I didn't included in the last pull request because I wanted to keep them a few more days in for-next before sending upstream: - Replace the ldcw barrier instruction by a nop instruction in the CAS code on uniprocessor machines. - Map variables read-only after init (enable ro_after_init feature)" * 'parisc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use __ro_after_init in init.c parisc: Use __ro_after_init in unwind.c parisc: Use __ro_after_init in time.c parisc: Use __ro_after_init in processor.c parisc: Use __ro_after_init in process.c parisc: Use __ro_after_init in perf_images.h parisc: Use __ro_after_init in pci.c parisc: Use __ro_after_init in inventory.c parisc: Use __ro_after_init in head.S parisc: Use __ro_after_init in firmware.c parisc: Use __ro_after_init in drivers.c parisc: Use __ro_after_init in cache.c parisc: Enable the ro_after_init feature parisc: Drop LDCW barrier in CAS code when running UP
-
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux由 Linus Torvalds 提交于
Pull kgdb updates from Daniel Thompson: "Mostly cleanups but there are also a couple of fixes for out-of-bounds accesses (including a potential write to the byte before a static buffer). The main changes are: - Fixes to those out-of-bounds access (empty string to configure test module could write the byte before a buffer, high cpu counts could read outside of per-cpu structures). - Improvements to string handling problems picked up by new compiler warnings and other static checks. Most are fixing benign issues that can't be tickled without code changes but still reduce the wtf factor a little. - Tidy up the terminal output" * tag 'kgdb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Fix bound check compiler warning kdb: do a sanity check on the cpu in kdb_per_cpu() kdb: Get rid of broken attempt to print CCVERSION in kdb summary misc: kgdbts: fix out-of-bounds access in function param_set_kgdbts_var kdb: kdb_support: replace strcpy() by strscpy() gdbstub: Replace strcpy() by strscpy() gdbstub: mark expected switch fall-throughs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull modules updates from Jessica Yu: - Use a separate table to store symbol types instead of hijacking fields in struct Elf_Sym - Trivial code cleanups * tag 'modules-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: add stubs for within_module functions kallsyms: store type information in its own array vmlinux.lds.h: drop unused __vermagic
-
由 Alexei Starovoitov 提交于
Daniel Borkmann says: ==================== This set fixes LRU map eviction in combination with map lookups out of system call side from user space. Main patch is the second one and test cases are adapted and added in the last one. Thanks! ==================== Acked-by: NAndrii Nakryiko <andriin@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
The test_lru_map is relying on marking the LRU map entry via regular BPF map lookup from system call side. This is basically for simplicity reasons. Given we fixed marking entries in that case, the test needs to be fixed as well. Here we add a small drop-in replacement to retain existing behavior for the tests by marking out of the BPF program and transferring the retrieved value out via temporary map. This also adds new test cases to track the new behavior where two elements are marked, one via system call side and one via program side, where the next update then evicts the key looked up only from system call side. # ./test_lru_map nr_cpus:8 test_lru_sanity0 (map_type:9 map_flags:0x0): Pass test_lru_sanity1 (map_type:9 map_flags:0x0): Pass test_lru_sanity2 (map_type:9 map_flags:0x0): Pass test_lru_sanity3 (map_type:9 map_flags:0x0): Pass test_lru_sanity4 (map_type:9 map_flags:0x0): Pass test_lru_sanity5 (map_type:9 map_flags:0x0): Pass test_lru_sanity7 (map_type:9 map_flags:0x0): Pass test_lru_sanity8 (map_type:9 map_flags:0x0): Pass test_lru_sanity0 (map_type:10 map_flags:0x0): Pass test_lru_sanity1 (map_type:10 map_flags:0x0): Pass test_lru_sanity2 (map_type:10 map_flags:0x0): Pass test_lru_sanity3 (map_type:10 map_flags:0x0): Pass test_lru_sanity4 (map_type:10 map_flags:0x0): Pass test_lru_sanity5 (map_type:10 map_flags:0x0): Pass test_lru_sanity7 (map_type:10 map_flags:0x0): Pass test_lru_sanity8 (map_type:10 map_flags:0x0): Pass test_lru_sanity0 (map_type:9 map_flags:0x2): Pass test_lru_sanity4 (map_type:9 map_flags:0x2): Pass test_lru_sanity6 (map_type:9 map_flags:0x2): Pass test_lru_sanity7 (map_type:9 map_flags:0x2): Pass test_lru_sanity8 (map_type:9 map_flags:0x2): Pass test_lru_sanity0 (map_type:10 map_flags:0x2): Pass test_lru_sanity4 (map_type:10 map_flags:0x2): Pass test_lru_sanity6 (map_type:10 map_flags:0x2): Pass test_lru_sanity7 (map_type:10 map_flags:0x2): Pass test_lru_sanity8 (map_type:10 map_flags:0x2): Pass Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
One of the biggest issues we face right now with picking LRU map over regular hash table is that a map walk out of user space, for example, to just dump the existing entries or to remove certain ones, will completely mess up LRU eviction heuristics and wrong entries such as just created ones will get evicted instead. The reason for this is that we mark an entry as "in use" via bpf_lru_node_set_ref() from system call lookup side as well. Thus upon walk, all entries are being marked, so information of actual least recently used ones are "lost". In case of Cilium where it can be used (besides others) as a BPF based connection tracker, this current behavior causes disruption upon control plane changes that need to walk the map from user space to evict certain entries. Discussion result from bpfconf [0] was that we should simply just remove marking from system call side as no good use case could be found where it's actually needed there. Therefore this patch removes marking for regular LRU and per-CPU flavor. If there ever should be a need in future, the behavior could be selected via map creation flag, but due to mentioned reason we avoid this here. [0] http://vger.kernel.org/bpfconf.html Fixes: 29ba732a ("bpf: Add BPF_MAP_TYPE_LRU_HASH") Fixes: 8f844938 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Add a callback map_lookup_elem_sys_only() that map implementations could use over map_lookup_elem() from system call side in case the map implementation needs to handle the latter differently than from the BPF data path. If map_lookup_elem_sys_only() is set, this will be preferred pick for map lookups out of user space. This hook is used in a follow-up fix for LRU map, but once development window opens, we can convert other map types from map_lookup_elem() (here, the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use the callback to simplify and clean up the latter. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight由 Linus Torvalds 提交于
Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
-
由 Linus Torvalds 提交于
Merge misc updates from Andrew Morton: - a few misc things and hotfixes - ocfs2 - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (139 commits) kernel/memremap.c: remove the unused device_private_entry_fault() export mm: delete find_get_entries_tag mm/huge_memory.c: make __thp_get_unmapped_area static mm/mprotect.c: fix compilation warning because of unused 'mm' variable mm/page-writeback: introduce tracepoint for wait_on_page_writeback() mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags mm/Kconfig: update "Memory Model" help text mm/vmscan.c: don't disable irq again when count pgrefill for memcg mm: memblock: make keeping memblock memory opt-in rather than opt-out hugetlbfs: always use address space in inode for resv_map pointer mm/z3fold.c: support page migration mm/z3fold.c: add structure for buddy handles mm/z3fold.c: improve compression by extending search mm/z3fold.c: introduce helper functions mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig mm/vmscan.c: simplify shrink_inactive_list() fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback xen/privcmd-buf.c: convert to use vm_map_pages_zero() xen/gntdev.c: convert to use vm_map_pages() ...
-
由 Christoph Hellwig 提交于
This export has been entirely unused since it was added more than 1 1/2 years ago. Link: http://lkml.kernel.org/r/20190429115535.12793-1-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDan Williams <dan.j.williams@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox (Oracle) 提交于
I removed the only user of this and hadn't noticed it was now unused. Link: http://lkml.kernel.org/r/20190430152929.21813-1-willy@infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: NRoss Zwisler <zwisler@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bharath Vedartham 提交于
__thp_get_unmapped_area is only used in mm/huge_memory.c. Make it static. Tested by building and booting the kernel. Link: http://lkml.kernel.org/r/20190504102353.GA22525@bharath12345-Inspiron-5559Signed-off-by: NBharath Vedartham <linux.bhar@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Since 0cbe3e26 ("mm: update ptep_modify_prot_start/commit to take vm_area_struct as arg") the only place that uses the local 'mm' variable in change_pte_range() is the call to set_pte_at(). Many architectures define set_pte_at() as macro that does not use the 'mm' parameter, which generates the following compilation warning: CC mm/mprotect.o mm/mprotect.c: In function 'change_pte_range': mm/mprotect.c:42:20: warning: unused variable 'mm' [-Wunused-variable] struct mm_struct *mm = vma->vm_mm; ^~ Fix it by passing vma->mm to set_pte_at() and dropping the local 'mm' variable in change_pte_range(). [liu.song.a23@gmail.com: fix missed conversions] Link: http://lkml.kernel.org/r/CAPhsuW6wcQgYLHNdBdw6m0YiR4RWsS4XzfpSKU7wBLLeOCTbpw@mail.gmail.comLink: http://lkml.kernel.org/r/1557305432-4940-1-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Song Liu <liu.song.a23@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yafang Shao 提交于
Recently there have been some hung tasks on our server due to wait_on_page_writeback(), and we want to know the details of this PG_writeback, i.e. this page is writing back to which device. But it is not so convenient to get the details. I think it would be better to introduce a tracepoint for diagnosing the writeback details. Link: http://lkml.kernel.org/r/1556274402-19018-1-git-send-email-laoar.shao@gmail.comSigned-off-by: NYafang Shao <laoar.shao@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yafang Shao 提交于
trace_reclaim_flags and trace_shrink_flags are almost the same. We can simplify them to avoid redundant code. Link: http://lkml.kernel.org/r/1556169203-5858-1-git-send-email-laoar.shao@gmail.comSigned-off-by: NYafang Shao <laoar.shao@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The help describing the memory model selection is outdated. It still says that SPARSEMEM is experimental and DISCONTIGMEM is a preferred over SPARSEMEM. Update the help text for the relevant options: * add a generic help for the "Memory Model" prompt * add description for FLATMEM * reduce the description of DISCONTIGMEM and add a deprecation note * prefer SPARSEMEM over DISCONTIGMEM Link: http://lkml.kernel.org/r/1556188531-20728-1-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yafang Shao 提交于
We can use __count_memcg_events() directly because this callsite is alreay protected by spin_lock_irq(). Link: http://lkml.kernel.org/r/1556093494-30798-1-git-send-email-laoar.shao@gmail.comSigned-off-by: NYafang Shao <laoar.shao@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-