Now that all boards have been converted to DT and all the support code
lives in mach-mvebu, we can remove mach-kirkwood.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>

Add information about the APQ8084 debug UART physical and virtual
addresses in the DEBUG_QCOM_UARTDM Kconfig help section.
Signed-off-by: NGeorgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This removes the need for mach/-headers in the debug macro.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Using the lowlevel debug uart is a corner case - even more so in a
multiplatform environment. So it seems reasonable to simply let the
developer set the appropriate uart type for the debugged SoC.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Separate Qualcomm low-level debugging UART to two options.

DEBUG_MSM_UART is used in earlier non-multi platform arches,
like MSM7X00A, QSD8X50 and MSM7X30.

DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have
embedded data mover.

Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by
Kconfig menu.
Signed-off-by: NIvan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Enable low-level debug support for i.MX6 SoloX by adding the debug
port definitions for the SoC.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Add choice for low-level debug UART. Similar to i.MX6, there is a
numeric configuration, valid choices are 0 to 3.
Note that the kernel assumes that the boot loader initialized clock
properly.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

efm32 has no mach/uncompress.h, but we can trivially use
the fallback to the ll_debug code by just allowing this
option in Kconfig.

Found during randconfig testing.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NUwe Kleine-König <kernel@pengutronix.de>

The tnetv107x support does not compile, and seems to have been broken
for a while with nobody caring to fix it. So far everyone I asked
said it's probably dead and completely unused and will never again
be needed in a future kernel release, so let's delete it.

If someone finds a use for this code later and is able to get it
to work again, we can always revert the removal.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NKevin Hilman <khilman@linaro.org>

Low-level debugging using the Broadcom Kona UART only makes sense on the
ARCH_BCM_MOBILE platform and would otherwise prevent ARCH_BCM_63XX from
picking up the right UART implementation by default.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NTim Kryger <tim.kryger@linaro.org>
Signed-off-by: NMatt Porter <mporter@linaro.org>

All Samsung platforms, not only Exynos, use the custom uncompress.h
simply to setup the uart for the initial debug output. This can also
be done using the generic uncompress.h.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This adds support for early debugging of BCM5301X SoC.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristian Daudt <bcm@fixthebug.org>
Signed-off-by: NMatt Porter <mporter@linaro.org>

As a pre-requisite step towards enabling multi-platform support
for Exynos, enable it to use generic uncompress.h instead of the
one provided in machine code.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Introduce a new mach-qcom that will support SoCs that intend to be
multiplatform compatible while keeping mach-msm to legacy SoC/board
support that will not transition over to multiplatform.

As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
to mach-qcom.
Signed-off-by: NKumar Gala <galak@codeaurora.org>

This patch adds low level debug uart support to Broadcom mobile based
SOCs.
Signed-off-by: NChristian Daudt <bcm@fixthebug.org>
Tested-by: NMarkus Mayer <markus.mayer@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Tested-by: NMatt Porter <mporter@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds UART0 as found on Marvell 88DE3xxx SoCs, e.g. Armada 1500
to the list of possible lowlevel debug options.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: NJason Cooper <jason@lakedaemon.net>
Reviewed-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

Now that all the page setting infrastructure is in place,
Add the DEBUG_SET_MODULE_RONX to the ARM debugging Kconfig.
When turned on, data sections for modules will be marked as NX
and read only sections will be marked as such.
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch allows the kernel page tables to be dumped via a debugfs file,
allowing kernel developers to check the layout of the kernel page tables
and the verify the various permissions and type settings.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add appropriate UART address definitions and support defines for using the
UARTs of the Freescale IMX50 SoC as debug ports.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add debug uart support for MSM8974. This patch adds a Kconfig
entry and the base address for the debug uart.
Signed-off-by: NRohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Create the hidden config DEBUG_MSM_UART and clean-up
the default selection for CONFIG_DEBUG_LL_INCLUDE.
Acked-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NRohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This implements output of debug messages on efm32 SoCs.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add low-level debug support for vybrid, so that earlyprintk can be
enabled for debugging early boot issue.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Support UART0 debug ll on Hisilicon Hi3620 SoC & Hi3716 SoC.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Section entries are 2MB on LPAE, so the DEBUG_LL virtual address must
have the same offset in the 2MB section as the physical address. This
fixes async external aborts when DEBUG_LL is enabled on Midway.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

DEBUG_UNCOMPRESS was previously disallowed for Tegra due to tegra.S's
use of global data that was not linked into the decompressor. Solve this
by declaring this symbol in tegra.S when it is being built into the
decompressor. For the kernel proper, leave the declaration in
mach-tegra/common.c as explained in the comment.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The SPEAr debug code is a copy of the PL01x debugging code, so rather
than have this pointless code duplication, lets just use the standard
implementation instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Davinci's debugging is just a copy of the old 8250_32 code with a
different base address.  Incorporate this into the generic 8250
debug code.
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Keystone's debugging is just a copy of the old 8250_32 code with a
different base address.  Incorporate this into the generic 8250
debug code.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Provide generic option choices for 8250 and PL01x UART ports; these can
now be selected by UART type rather than asking about the platform.
This means that a kernel configuration user can manually choose the
various parameters of the debug UART without resorting to the platform
having to encode the possible settings.

These two generic options are preferred over further debug entries for
these ports; the existing options which refer back to the 8250 and PL01x
ports are now considered deprecated.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that the PL01X debug include can mostly stand alone without
requiring platforms to provide any macros, move it into the debug
directory so it can be directly included.  This allows us to get rid of
a lot of debug-macros include files.

The autodetect case for Versatile Express and the ux500 are left alone;
these are more complicated implementations.
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NRyan Mallon <rmallon@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the definition of the UART register addresses out of the platform
specific header files into the Kconfig files.
Acked-by: NRyan Mallon <rmallon@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add 32-bit word access support to debug/8250.S and convert Picoxcell
and SoCFPGA to this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that the 8250 debug include can stand alone without requiring
platforms to provide any macros, move it into the debug directory
so it can be directly included.  This allows us to get rid of a lot
of debug-macros include files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the definition of the UART register addresses out of the platform
specific header file into the Kconfig files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the definition of the UART register shift out of the platform
specific header file into the Kconfig files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the definition out of the machine class debug-macro.S header
into the Kconfig files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>