- 16 4月, 2019 1 次提交
-
-
由 Varun Prakash 提交于
Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 27 2月, 2019 2 次提交
-
-
由 Varun Prakash 提交于
T6 adapters generates DDP completion message on receiving all iSCSI pdus in a sequence. Because of this, driver can not keep track of tcp sequence number for T6 adapters. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Varun Prakash 提交于
Instead of using viid to get pf number, directly get pf number from lldi->pf. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 1月, 2019 1 次提交
-
-
由 Varun Prakash 提交于
In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion(). Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 19 12月, 2018 1 次提交
-
-
由 Christoph Hellwig 提交于
The same effects can be achieved by setting the dma_boundary to PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those settings into the drivers. Note that in many cases the setting might be bogus, but this keeps the status quo. [mkp: fix myrs and myrb] Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 24 11月, 2018 1 次提交
-
-
由 Santosh Rastapur 提交于
If the fw supports returning VIN/VIVLD in FW_VI_CMD save it in port_info structure else retrieve these from viid and save them in port_info structure. Do the same for smt_idx from FW_VI_MAC_CMD Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2018 1 次提交
-
-
由 Varun Prakash 提交于
Add IEEE and CEE DCBX support for iSCSI connections. Signed-off-by: NRohit Maheshwari <rohitm@chelsio.com> Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 10 4月, 2018 1 次提交
-
-
由 Dan Carpenter 提交于
Smatch marks skb->data as untrusted so it complains that there is a potential overflow here: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:2111 t4_uld_rx_handler() error: buffer overflow 'cxgb4i_cplhandlers' 239 <= 255. In this case, skb->data comes from the hardware or firmware so it's not going to overflow unless there is a firmware bug. [mkp: fixed braces] Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 22 11月, 2017 1 次提交
-
-
由 Kees Cook 提交于
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 02 11月, 2017 1 次提交
-
-
由 Kees Cook 提交于
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Karen Xie <kxie@chelsio.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 10月, 2017 1 次提交
-
-
由 Varun Prakash 提交于
In case of connection reset Tx skb queue can have some skbs which are not transmitted so purge Tx skb queue in release_offload_resources() to avoid skb leak. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 17 8月, 2017 1 次提交
-
-
由 Varun Prakash 提交于
If nud_state is not valid then call neigh_event_send() to update MAC address. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 27 6月, 2017 1 次提交
-
-
由 Varun Prakash 提交于
Assign rxq to TCP connections in round robin mode to use all available rxqs. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 6月, 2017 1 次提交
-
-
由 Johannes Berg 提交于
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2017 1 次提交
-
-
由 Ganesh Goudar 提交于
the adapter consumes two tids for every ipv6 offload connection be it active or passive, calculate tid usage count accordingly. Also change the signatures of relevant functions to get the address family. Signed-off-by: NRizwan Ansari <rizwana@chelsio.com> Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2017 1 次提交
-
-
由 Varun Prakash 提交于
If logout response is not received and ->ep_disconnect() is called then close tcp conn by RST instead of FIN to cleanup conn resources immediately. Also move ->csk_push_tx_frames() above 'done:' to avoid calling ->csk_push_tx_frames() in error cases. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 19 4月, 2017 1 次提交
-
-
由 Varun Prakash 提交于
Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 07 2月, 2017 1 次提交
-
-
由 Christoph Hellwig 提交于
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 15 12月, 2016 4 次提交
-
-
由 Varun Prakash 提交于
Add module_put() in cxgbi_sock_act_open_req_arp_failure() to release module reference in case of arp failure, also check return value of try_module_get() before posting active open hw cmd. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Varun Prakash 提交于
T6 adapters reduce number of completions to host by generating single completion for all the directly placed(DDP) iSCSI pdus in a sequence. This patch adds new structure for completion hw cmd (struct cpl_rx_iscsi_cmp) and implements T6 completion feature. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Varun Prakash 提交于
Add T6 active open cmd to open active connections on T6 adapters. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Varun Prakash 提交于
cxgb4_tp_smt_idx() is defined in cxgb4 driver, it returns smt_idx for T4,T5,T6 adapters. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 01 12月, 2016 1 次提交
-
-
由 Quentin Lambert 提交于
Most error branches following the call to dst_neigh_lookup contain a call to neigh_release. This patch add these calls where they are missing. This issue was found with Hector. Signed-off-by: NQuentin Lambert <lambert.quentin@gmail.com> Acked-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 19 11月, 2016 1 次提交
-
-
由 Hariprasad Shenai 提交于
Allocate resources dynamically for Upper layer driver's (ULD) like cxgbit, iw_cxgb4, cxgb4i and chcr. The resources allocated include Tx queues which are allocated when ULD register with cxgb4 driver and freed while un-registering. The Tx queues which are shared by ULD shall be allocated by first registering driver and un-allocated by last unregistering driver. Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2016 1 次提交
-
-
由 Varun Prakash 提交于
If SKCBF_TX_FLAG_COMPL flag is set and unacknowledged credits are >= max credits / 2, set completion bit in work request to reclaim credits. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 19 9月, 2016 1 次提交
-
-
由 Hariprasad Shenai 提交于
Allocate resources dynamically to cxgb4's Upper layer driver's(ULD) like cxgbit, iw_cxgb4 and cxgb4i. Allocate resources when they register with cxgb4 driver and free them while unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 7月, 2016 3 次提交
-
-
由 Varun Prakash 提交于
Fix following sparse warnings warning: symbol 'cxgb3i_ofld_init' was not declared. Should it be static? warning: symbol 'cxgb4i_cplhandlers' was not declared. Should it be static? warning: symbol 'cxgb4i_ofld_init' was not declared. Should it be static? Signed-off-by: NVarun Prakash <varun@chelsio.com> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add iSCSI DDP support in cxgb4i driver using common iSCSI DDP Page Pod Manager. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Remove old ddp code from cxgb3i,cxgb4i,libcxgbi. Next two commits adds DDP support using common iSCSI DDP Page Pod Manager. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2016 1 次提交
-
-
由 Nicolas Dichtel 提交于
let's use the common definition to avoid the following warning during the compilation: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:161:0: warning: "DIV_ROUND_UP" redefined #define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) ^ In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:16: include/linux/kernel.h:67:0: note: this is the location of the previous definition #define DIV_ROUND_UP __KERNEL_DIV_ROUND_UP ^ Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2015 1 次提交
-
-
由 Karen Xie 提交于
This helps improving the latency of small packets. Signed-off-by: NRakesh Ranjan <rakesh@chelsio.com> Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2015 4 次提交
-
-
由 Karen Xie 提交于
set the initial sequence number so the 1st byte of payload is aligned on the 8-byte boundary. Signed-off-by: NKaren Xie <kxie@chelsio.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Karen Xie 提交于
Change driver version to follow the same format as other Chelsio drivers. Added missing release date back to cxgb4i and version string back to libcxgbi. Signed-off-by: NKaren Xie <kxie@chelsio.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Karen Xie 提交于
Signed-off-by: NKaren Xie <kxie@chelsio.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Karen Xie 提交于
For adapters supporting both 10G and 40G use per-connection send/recv window and calculate the size based on the link speed. Signed-off-by: NKaren Xie <kxie@chelsio.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 16 1月, 2015 1 次提交
-
-
由 Anish Bhatt 提交于
Get a reference on every ipv6 address we offload to hardware so that it cannot be prematurely cleared out before cleanup. Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2015 2 次提交
-
-
由 Hariprasad Shenai 提交于
iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 12月, 2014 2 次提交
-
-
由 Karen Xie 提交于
use cxgb4's set_wr_txq() for setting of the tx queue for a outgoing packet. remove the similar function in cxgb4i. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karen Xie 提交于
Abort the connection upon receiving of cpl_rx_data, which means the pdu cannot be recovered from the tcp stream. This generally is due to pdu header corruption. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-