- 17 10月, 2015 40 次提交
-
-
由 Christian Gromm 提交于
This patch fixes a couple of issues of the hdm-usb module found by checkpatch.pl. Signed-off-by: NChristian Gromm <christian.gromm@microchip.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Christian Gromm 提交于
This patch fixes the issues of HDM module i2c found by checkpatch.pl Signed-off-by: NChristian Gromm <christian.gromm@microchip.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Christian Gromm 提交于
This patch removes constants from comparisons and fixes checkpatch warnings about constants being put in the wrong place inside a comparison. Signed-off-by: NChristian Gromm <christian.gromm@microchip.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Christian Gromm 提交于
This patch fixes line-over-80-characters violation and removes the splitting of quoted strings. Signed-off-by: NChristian Gromm <christian.gromm@microchip.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
The variable mbo is already NULL tested so, check on it should be removed. Semantic patch used: @@ expression E; statement S; @@ if(E==NULL) {... return ...;} - if(E) S Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gavin Thomas Claugus 提交于
Fix 80+ character line in cdev.c to stop checkpatch from whining. Signed-off-by: NGavin Thomas Claugus <gclaugus@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aybuke Ozdemir 提交于
Problem found using checkpatch.pl CHECK: Comparison to NULL could be written "(!)dcon_device" Signed-off-by: NAybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aybuke Ozdemir 提交于
This patch "uint16_t" type instead of "u16" type was used. checkpatch.pl issue. Signed-off-by: NAybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aybuke Ozdemir 提交于
Remove multiple blank lines. Problem found using checkpatch.pl CHECK: Please don't use multiple blank lines. Signed-off-by: NAybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alison Schofield 提交于
Replace explicit NULL comparison and zero comparison test with ! operator to simplify code. Signed-off-by: NAlison Schofield <amsfield22@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
struct bd is already NULL tested so, any further NULL checks should be removed. Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
Compiler can typecast variables implicitly so, explicit type cast is not required and should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Luis de Bethencourt 提交于
Boolean tests do not need explicit comparison to true or false. Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alison Schofield 提交于
Delete unneeded tabs to indent statement block correctly at (8, 16). checkpatch.pl: WARNING: suspect code indent for conditional statements (8, 24) Signed-off-by: NAlison Schofield <amsfield22@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
Explicit type casting is not required as compiler can type cast variables implicitly. Therefore, it should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tim Sell 提交于
evdev_open_device() and evdev_close_device() (in evdev.c) already track the open count under lock, and will only call visorinput_open() on the first open and visorinput_close() on the last close. So this patch removes the unnessary logic from visorinput, and the now-unused counter from the struct. Signed-off-by: NTim Sell <timothy.sell@unisys.com> Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tim Sell 提交于
Fix the multi-line comment formatting in visorinput.c. Signed-off-by: NTim Sell <timothy.sell@unisys.com> Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tim Sell 提交于
Fix the alignment of function parameters to the parenthesis above. Signed-off-by: NTim Sell <Timothy.Sell@unisys.com> Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amitoj Kaur Chawla 提交于
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Cristina Moraru 提交于
Thus using the preferred style for multi-line coments as mentioned in Documentation/CodingStyle. It also silences 'Block comments use * on subsequent lines' and 'Block comments use a trailing */ on a separate line' checkpatch.pl warnings. Signed-off-by: NCristina Moraru <cristina.moraru09@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
Compiler can typecast variables implicitly so, explicit type cast is not required and should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
Remove explicit type conversion as it is not required. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shivani Bhardwaj 提交于
Remove explicit typecast from variables as compiler can typecast implicitly. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by: NShivani Bhardwaj <shivanib134@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Cristina Moraru 提交于
Thus use the preferred style for multi-line coments as mentioned in Documentation/CodingStyle. It also silences 'Block comments use * on subsequent lines' checkpatch.pl warnings. Signed-off-by: NCristina Moraru <cristina.moraru09@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-