- 14 12月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Tested-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 12月, 2017 1 次提交
-
-
由 Christoph Paasch 提交于
The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f972 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: NChristoph Paasch <cpaasch@apple.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2017 3 次提交
-
-
由 Xin Long 提交于
Now in sctp_setsockopt_reset_streams, it only does the check optlen < sizeof(*params) for optlen. But it's not enough, as params->srs_number_streams should also match optlen. If the streams in params->srs_stream_list are less than stream nums in params->srs_number_streams, later when dereferencing the stream list, it could cause a slab-out-of-bounds crash, as reported by syzbot. This patch is to fix it by also checking the stream numbers in sctp_setsockopt_reset_streams to make sure at least it's not greater than the streams in the list. Fixes: 7f9d68ac ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mohamed Ghannam 提交于
inet->hdrincl is racy, and could lead to uninitialized stack pointer usage, so its value should be read only once. Fixes: c008ba5b ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt") Signed-off-by: NMohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kevin Cernekee 提交于
Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by: NKevin Cernekee <cernekee@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2017 1 次提交
-
-
由 Johannes Berg 提交于
Due to overlap between commit 12811037 ("mac80211: Simplify locking in ieee80211_sta_tear_down_BA_sessions()") and the way that Luca modified commit 72e2c343 ("mac80211: tear down RX aggregations first") when sending it upstream from Intel's internal tree, we get the following warning: WARNING: CPU: 0 PID: 5472 at net/mac80211/agg-tx.c:315 ___ieee80211_stop_tx_ba_session+0x158/0x1f0 since there's no appropriate locking around the call to ___ieee80211_stop_tx_ba_session; Sara's original just had a call to the locked __ieee80211_stop_tx_ba_session (one less underscore) but it looks like Luca modified both of the calls when fixing it up for upstream, leading to the problem at hand. Move the locking appropriately to fix this problem. Reported-by: NKalle Valo <kvalo@codeaurora.org> Reported-by: NPavel Machek <pavel@ucw.cz> Tested-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 09 12月, 2017 7 次提交
-
-
由 Yuchung Cheng 提交于
RACK skips an ACK unless it advances the most recently delivered TX timestamp (rack.mstamp). Since RACK also uses the most recent RTT to decide if a packet is lost, RACK should still run the loss detection whenever the most recent RTT changes. For example, an ACK that does not advance the timestamp but triggers the cwnd undo due to reordering, would then use the most recent (higher) RTT measurement to detect further losses. Signed-off-by: NYuchung Cheng <ycheng@google.com> Reviewed-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NPriyaranjan Jha <priyarjha@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
RACK should mark a packet lost when remaining wait time is zero. Signed-off-by: NYuchung Cheng <ycheng@google.com> Reviewed-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NPriyaranjan Jha <priyarjha@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
When sender detects spurious retransmission, all packets marked lost are remarked to be in-flight. However some may be considered lost based on its timestamps in RACK. This patch forces RACK to re-evaluate, which may be skipped previously if the ACK does not advance RACK timestamp. Signed-off-by: NYuchung Cheng <ycheng@google.com> Reviewed-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NPriyaranjan Jha <priyarjha@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
RACK does not test the loss recovery state correctly to compute the reordering window. It assumes if lost_out is zero then TCP is not in loss recovery. But it can be zero during recovery before calling tcp_rack_detect_loss(): when an ACK acknowledges all packets marked lost before receiving this ACK, but has not yet to discover new ones by tcp_rack_detect_loss(). The fix is to simply test the congestion state directly. Signed-off-by: NYuchung Cheng <ycheng@google.com> Reviewed-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NPriyaranjan Jha <priyarjha@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Fix BBR so that upon notification of a loss recovery undo BBR resets long-term bandwidth sampling. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this can cause BBR to spuriously estimate that we are seeing loss rates high enough to trigger long-term bandwidth estimation. To avoid that problem, this commit resets long-term bandwidth sampling on loss recovery undo events. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NYuchung Cheng <ycheng@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Fix BBR so that upon notification of a loss recovery undo BBR resets the full pipe detection (STARTUP exit) state machine. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this could previously cause BBR to spuriously estimate that the pipe is full. Since spurious loss recovery means that our overall sending will have slowed down spuriously, this commit gives a flow more time to probe robustly for bandwidth and decide the pipe is really full. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NYuchung Cheng <ycheng@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
This commit records the "full bw reached" decision in a new full_bw_reached bit. This is a pure refactor that does not change the current behavior, but enables subsequent fixes and improvements. In particular, this enables simple and clean fixes because the full_bw and full_bw_cnt can be unconditionally zeroed without worrying about forgetting that we estimated we filled the pipe in Startup. And it enables future improvements because multiple code paths can be used for estimating that we filled the pipe in Startup; any new code paths only need to set this bit when they think the pipe is full. Note that this fix intentionally reduces the width of the full_bw_cnt counter, since we have never used the most significant bit. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NYuchung Cheng <ycheng@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2017 3 次提交
-
-
由 Yousuk Seung 提交于
Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: NYousuk Seung <ysseung@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NPriyaranjan Jha <priyarjha@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When I switched rcv_rtt_est to high resolution timestamps, I forgot that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust() Using an old timestamp leads to autotuning lags. Fixes: 645f4c6f ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikita V. Shirokov 提交于
commit 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: NNikita V. Shirokov <tehnerd@fb.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2017 2 次提交
-
-
由 Håkon Bugge 提交于
This is a fix for syzkaller719569, where memory registration was attempted without any underlying transport being loaded. Analysis of the case reveals that it is the setsockopt() RDS_GET_MR (2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable. Here is an example stack trace when the bug is hit: BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 IP: __rds_rdma_map+0x36/0x440 [rds] PGD 2f93d03067 P4D 2f93d03067 PUD 2f93d02067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror dm_region_hash dm_log dm_mod CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 task: ffff882f9190db00 task.stack: ffffc9002b994000 RIP: 0010:__rds_rdma_map+0x36/0x440 [rds] RSP: 0018:ffffc9002b997df0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff882fa2182580 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc9002b997e40 RDI: ffff882fa2182580 RBP: ffffc9002b997e30 R08: 0000000000000000 R09: 0000000000000002 R10: ffff885fb29e3838 R11: 0000000000000000 R12: ffff882fa2182580 R13: ffff882fa2182580 R14: 0000000000000002 R15: 0000000020000ffc FS: 00007fbffa20b700(0000) GS:ffff882fbfb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000002f98a66006 CR4: 00000000001606e0 Call Trace: rds_get_mr+0x56/0x80 [rds] rds_setsockopt+0x172/0x340 [rds] ? __fget_light+0x25/0x60 ? __fdget+0x13/0x20 SyS_setsockopt+0x80/0xe0 do_syscall_64+0x67/0x1b0 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fbff9b117f9 RSP: 002b:00007fbffa20aed8 EFLAGS: 00000293 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000000c84a4 RCX: 00007fbff9b117f9 RDX: 0000000000000002 RSI: 0000400000000114 RDI: 000000000000109b RBP: 00007fbffa20af10 R08: 0000000000000020 R09: 00007fbff9dd7860 R10: 0000000020000ffc R11: 0000000000000293 R12: 0000000000000000 R13: 00007fbffa20b9c0 R14: 00007fbffa20b700 R15: 0000000000000021 Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48 89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48> 83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08 The fix is to check the existence of an underlying transport in __rds_rdma_map(). Signed-off-by: NHåkon Bugge <haakon.bugge@oracle.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Dion 提交于
Macvlan devices are similar to vlans and do not update their own trans_start. In order for arp monitoring to work for a bond device when the slaves are macvlans, obtain its real device. Signed-off-by: NChris Dion <christopher.dion@dell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2017 12 次提交
-
-
由 Johannes Berg 提交于
Change the scripting inside the shipped/extra certs C code generation to not write the file when there are any failures. That way, if the build aborts due to failures, we don't get into a situation where a dummy file has been created and the next build succeeds, but not with the desired output. Fixes: 90a53e44 ("cfg80211: implement regdb signature checking") Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Since od/sed are in posix, hopefully there's a better chance people will have them, over hexdump. Fixes: 90a53e44 ("cfg80211: implement regdb signature checking") Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Al Viro 提交于
This changes calling conventions (and simplifies the hell out the callers). New rules: once struct socket had been passed to sock_alloc_file(), it's been consumed either by struct file or by sock_release() done by sock_alloc_file(). Either way the caller should not do sock_release() after that point. Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
simplifies failure exits considerably... Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
1) it's fput() or sock_release(), not both 2) don't do fd_install() until the last failure exit. 3) not a bug per se, but... don't attach socket to struct file until it's set up. Take reserving descriptor into the caller, move fd_install() to the caller, sanitize failure exits and calling conventions. Cc: stable@vger.kernel.org # v4.6+ Acked-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mohamed Ghannam 提交于
Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL. Signed-off-by: NMohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
Since commit 3b4477d2 ("VSOCK: use TCP state constants for sk_state") VSOCK has used TCP_* constants for sk_state. Commit b4562ca7 ("hv_sock: add locking in the open/close/release code paths") reintroduced the SS_DISCONNECTING constant. This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING constant. CC: Dexuan Cui <decui@microsoft.com> CC: Cathy Avery <cavery@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NJorgen Hansen <jhansen@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
When the function tipc_accept_from_sock() fails to create an instance of struct tipc_subscriber it omits to free the already created instance of struct tipc_conn instance before it returns. We fix that with this commit. Reported-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
In tipc_topsrv_kern_subscr() when s->tipc_conn_new() fails we call tipc_close_conn() to clean up, but in this case calling conn_put() is just enough. This fixes the folllowing crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 3085 Comm: syzkaller064164 Not tainted 4.15.0-rc1+ #137 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: 00000000c24413a5 task.stack: 000000005e8160b5 RIP: 0010:__lock_acquire+0xd55/0x47f0 kernel/locking/lockdep.c:3378 RSP: 0018:ffff8801cb5474a8 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff85ecb400 RBP: ffff8801cb547830 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff87489d60 R12: ffff8801cd2980c0 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000020 FS: 00000000014ee880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffee2426e40 CR3: 00000001cb85a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:4004 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:320 [inline] tipc_subscrb_subscrp_delete+0x8f/0x470 net/tipc/subscr.c:201 tipc_subscrb_delete net/tipc/subscr.c:238 [inline] tipc_subscrb_release_cb+0x17/0x30 net/tipc/subscr.c:316 tipc_close_conn+0x171/0x270 net/tipc/server.c:204 tipc_topsrv_kern_subscr+0x724/0x810 net/tipc/server.c:514 tipc_group_create+0x702/0x9c0 net/tipc/group.c:184 tipc_sk_join net/tipc/socket.c:2747 [inline] tipc_setsockopt+0x249/0xc10 net/tipc/socket.c:2861 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 14c04493 ("tipc: add ability to order and receive topology events in driver") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Check the qmin & qmax values doesn't overflow for the given Wlog value. Check that qmin <= qmax. Fixes: a7834745 ("[PKT_SCHED]: Generic RED layer") Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This reverts commit d6f295e9; some userspace (in the case we noticed it's wpa_supplicant), is relying on the current error code to determine that a fixed name interface already exists. Reported-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We had to disable BH _before_ calling __inet_twsk_hashdance() in commit cfac7f83 ("tcp/dccp: block bh before arming time_wait timer"). This means we can revert 614bdd4d ("tcp: must block bh in __inet_twsk_hashdance()"). Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NJames Morris <james.l.morris@oracle.com> Tested-by: NJames Morris <james.l.morris@oracle.com> Tested-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2017 1 次提交
-
-
由 David Howells 提交于
In rxrpc_release_sock() there may be no rx->local value to access, so we can't unconditionally follow it to the rxrpc network namespace information to poke the connection reapers. Instead, use the socket's namespace pointer to find the namespace. This unfixed code causes the following static checker warning: net/rxrpc/af_rxrpc.c:898 rxrpc_release_sock() error: we previously assumed 'rx->local' could be null (see line 887) Fixes: 3d18cbb7 ("rxrpc: Fix conn expiry timers") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2017 5 次提交
-
-
由 Tommi Rantala 提交于
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just checked that the bearer is not up, and calling tipc_rcv() with a bearer that is not up leads to a TIPC div-by-zero crash in tipc_node_calculate_timer(). The crash is rare in practice, but can happen like this: We're enabling a bearer, but it's not yet up and fully initialized. At the same time we receive a discovery packet, and in tipc_udp_recv() we end up calling tipc_rcv() with the not-yet-initialized bearer, causing later the div-by-zero crash in tipc_node_calculate_timer(). Jon Maloy explains the impact of removing the second tipc_rcv() call: "link setup in the worst case will be delayed until the next arriving discovery messages, 1 sec later, and this is an acceptable delay." As the tipc_rcv() call is removed, just leave the function via the rcu_out label, so that we will kfree_skb(). [ 12.590450] Own node address <1.1.1>, network identity 1 [ 12.668088] divide error: 0000 [#1] SMP [ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1 [ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000 [ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] [ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246 [ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000 [ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600 [ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001 [ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8 [ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800 [ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000 [ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0 [ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 12.712627] Call Trace: [ 12.713390] <IRQ> [ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc] [ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc] [ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc] [ 12.717396] ? minmax_running_min+0x2f/0x60 [ 12.718248] ? dst_alloc+0x4c/0xa0 [ 12.718964] ? tcp_ack+0xaf1/0x10b0 [ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc] [ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc] [ 12.721459] ? dst_alloc+0x4c/0xa0 [ 12.722130] udp_queue_rcv_skb+0x264/0x490 [ 12.722924] __udp4_lib_rcv+0x21e/0x990 [ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0 [ 12.724442] ? tcp_v4_rcv+0x958/0xa40 [ 12.725039] udp_rcv+0x1a/0x20 [ 12.725587] ip_local_deliver_finish+0x97/0x1d0 [ 12.726323] ip_local_deliver+0xaf/0xc0 [ 12.726959] ? ip_route_input_noref+0x19/0x20 [ 12.727689] ip_rcv_finish+0xdd/0x3b0 [ 12.728307] ip_rcv+0x2ac/0x360 [ 12.728839] __netif_receive_skb_core+0x6fb/0xa90 [ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0 [ 12.730274] __netif_receive_skb+0x1d/0x60 [ 12.730953] ? __netif_receive_skb+0x1d/0x60 [ 12.731637] netif_receive_skb_internal+0x37/0xd0 [ 12.732371] napi_gro_receive+0xc7/0xf0 [ 12.732920] receive_buf+0x3c3/0xd40 [ 12.733441] virtnet_poll+0xb1/0x250 [ 12.733944] net_rx_action+0x23e/0x370 [ 12.734476] __do_softirq+0xc5/0x2f8 [ 12.734922] irq_exit+0xfa/0x100 [ 12.735315] do_IRQ+0x4f/0xd0 [ 12.735680] common_interrupt+0xa2/0xa2 [ 12.736126] </IRQ> [ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10 [ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d [ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000 [ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88 [ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000 [ 12.741831] default_idle+0x2a/0x100 [ 12.742323] arch_cpu_idle+0xf/0x20 [ 12.742796] default_idle_call+0x28/0x40 [ 12.743312] do_idle+0x179/0x1f0 [ 12.743761] cpu_startup_entry+0x1d/0x20 [ 12.744291] start_secondary+0x112/0x120 [ 12.744816] secondary_startup_64+0xa5/0xa5 [ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00 00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48 89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f [ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0 [ 12.748555] ---[ end trace 1399ab83390650fd ]--- [ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt [ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 12.751215] Rebooting in 60 seconds.. Fixes: c9b64d49 ("tipc: add replicast peer discovery") Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Maciej Żenczykowski reported some panics in tcp_twsk_destructor() that might be caused by the following bug. timewait timer is pinned to the cpu, because we want to transition timwewait refcount from 0 to 4 in one go, once everything has been initialized. At the time commit ed2e9239 ("tcp/dccp: fix timewait races in timer handling") was merged, TCP was always running from BH habdler. After commit 5413d1ba ("net: do not block BH while processing socket backlog") we definitely can run tcp_time_wait() from process context. We need to block BH in the critical section so that the pinned timer has still its purpose. This bug is more likely to happen under stress and when very small RTO are used in datacenter flows. Fixes: 5413d1ba ("net: do not block BH while processing socket backlog") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMaciej Żenczykowski <maze@google.com> Acked-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now for the abandoned chunks in unsent outq, it would just free the chunks. Because no tsn is assigned to them yet, there's no need to send fwd tsn to peer, unlike for the abandoned chunks in sent outq. The problem is when parts of the msg have been sent and the other frags are still in unsent outq, if they are abandoned/dropped, the peer would never get this msg reassembled. So these frags in unsent outq can't be dropped if this msg already has outstanding frags. This patch does the check in sctp_chunk_abandoned and sctp_prsctp_prune_unsent. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
As rfc3758#section-3.1 demands: A3) When a TSN is "abandoned", if it is part of a fragmented message, all other TSN's within that fragmented message MUST be abandoned at the same time. Besides, if it couldn't handle this, the rest frags would never get assembled in peer side. This patch supports it by adding abandoned flag in sctp_datamsg, when one chunk is being abandoned, set chunk->msg->abandoned as well. Next time when checking for abandoned, go checking chunk->msg->abandoned first. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now outstanding_bytes is only increased when appending chunks into one packet and sending it at 1st time, while decreased when it is about to move into retransmit queue. It means outstanding_bytes value is already decreased for all chunks in retransmit queue. However sctp_prsctp_prune_sent is a common function to check the chunks in both transmitted and retransmit queue, it decrease outstanding_bytes when moving a chunk into abandoned queue from either of them. It could cause outstanding_bytes underflow, as it also decreases it's value for the chunks in retransmit queue. This patch fixes it by only updating outstanding_bytes for transmitted queue when pruning queues for prsctp prio policy, the same fix is also needed in sctp_check_transmitted. Fixes: 8dbdf1f5 ("sctp: implement prsctp PRIO policy") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2017 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 30 11月, 2017 2 次提交
-
-
由 Hangbin Liu 提交于
After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by: NJianlin Shi <jishi@redhat.com> Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as used in TCP stack. MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus TCP_SKB_CB(skb)->header.h6 This patch probably fixes RST packets sent on behalf of a timewait md5 ipv6 socket. Before Florian patch, tcp_v6_restore_cb() was needed before jumping to no_tcp_socket label. Fixes: 271c3b9b ("tcp: honour SO_BINDTODEVICE for TW_RST case too") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-