Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable.  This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.

No functional change intended.
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-ppc-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

KVM PPC update for 5.7

* Add a capability for enabling secure guests under the Protected
  Execution Framework ultravisor

* Various bug fixes and cleanups.

KVM/arm updates for Linux 5.7

- GICv4.1 support
- 32bit host removal

Merge tag 'kvm-s390-next-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix for error codes

- return the proper error to userspace when a signal interrupts the
  KSM unsharing operation

If a signal is pending we might return -ENOMEM instead of -EINTR.
We should propagate the proper error during KSM unsharing.
unmerge_ksm_pages returns -ERESTARTSYS on signal_pending. This gets
translated by entry.S to -EINTR. It is important to get this error
code so that userspace can retry.

To make this clearer we also add -EINTR to the documentation of the
PV_ENABLE call, which calls unmerge_ksm_pages.

Fixes: 3ac8e380 ("s390/mm: disable KSM for storage key enabled pages")
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reported-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Merge tag 'kvm-s390-next-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: cleanups for 5.7

- mark sie control block as 512 byte aligned
- use fallthrough;

Fix a copy-paste typo in a comment and error message.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reset the LRU slot if it becomes invalid when deleting a memslot to fix
an out-of-bounds/use-after-free access when searching through memslots.

Explicitly check for there being no used slots in search_memslots(), and
in the caller of s390's approximation variant.

Fixes: 36947254 ("KVM: Dynamically size memslot array based on number of used slots")
Reported-by: NQian Cai <cai@lca.pw>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-2-sean.j.christopherson@intel.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch optimizes the virtual IPI fastpath emulation sequence:

write ICR2                          send virtual IPI
read ICR2                           write ICR2
send virtual IPI         ==>        write ICR
write ICR

We can observe ~0.67% performance improvement for IPI microbenchmark
(https://lore.kernel.org/kvm/20171219085010.4081-1-ynorov@caviumnetworks.com/)
on Skylake server.
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Message-Id: <1585189202-1708-4-git-send-email-wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Delay read msr data until we identify guest accesses ICR MSR to avoid
to penalize all other MSR writes.
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Message-Id: <1585189202-1708-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

At present, on Power systems with Protected Execution Facility
hardware and an ultravisor, a KVM guest can transition to being a
secure guest at will.  Userspace (QEMU) has no way of knowing
whether a host system is capable of running secure guests.  This
will present a problem in future when the ultravisor is capable of
migrating secure guests from one host to another, because
virtualization management software will have no way to ensure that
secure guests only run in domains where all of the hosts can
support secure guests.

This adds a VM capability which has two functions: (a) userspace
can query it to find out whether the host can support secure guests,
and (b) userspace can enable it for a guest, which allows that
guest to become a secure guest.  If userspace does not enable it,
KVM will return an error when the ultravisor does the hypercall
that indicates that the guest is starting to transition to a
secure guest.  The ultravisor will then abort the transition and
the guest will terminate.
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NRam Pai <linuxram@us.ibm.com>

Goodbye KVM/arm
Signed-off-by: NMarc Zyngier <maz@kernel.org>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

The vgic-state debugfs file could do with showing the pending state
of the HW-backed SGIs. Plug it into the low-level code.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-24-maz@kernel.org

Just like for VLPIs, it is beneficial to avoid trapping on WFI when the
vcpu is using the GICv4.1 SGIs.

Add such a check to vcpu_clear_wfx_traps().
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-23-maz@kernel.org

Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.

These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.

Of course, we only support Group-1 for now...
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org

The GICv4.1 architecture gives the hypervisor the option to let
the guest choose whether it wants the good old SGIs with an
active state, or the new, HW-based ones that do not have one.

For this, plumb the configuration of SGIs into the GICv3 MMIO
handling, present the GICD_TYPER2.nASSGIcap to the guest,
and handle the GICD_CTLR.nASSGIreq setting.

In order to be able to deal with the restore of a guest, also
apply the GICD_CTLR.nASSGIreq setting at first run so that we
can move the restored SGIs to the HW if that's what the guest
had selected in a previous life.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-21-maz@kernel.org

In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.

Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org

Most of the GICv3 emulation code that deals with SGIs now has to be
aware of the v4.1 capabilities in order to benefit from it.

Add such support, keyed on the interrupt having the hw flag set and
being a SGI.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-19-maz@kernel.org

As GICv4.1 understands the life cycle of doorbells (instead of
just randomly firing them at the most inconvenient time), just
enable them at irq_request time, and be done with it.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-18-maz@kernel.org

Now that we have HW-accelerated SGIs being delivered to VPEs, it
becomes required to map the VPEs on all ITSs instead of relying
on the lazy approach that we would use when using the ITS-list
mechanism.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-17-maz@kernel.org

Add the SGI configuration entry point for KVM to use.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-16-maz@kernel.org

Allocate per-VPE SGIs when initializing the GIC-specific part of the
VPE data structure.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-15-maz@kernel.org

In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.

This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org

Just like for vLPIs, there is some configuration information that cannot
be directly communicated through the normal irqchip API, and we have to
use our good old friend set_vcpu_affinity as a side-band communication
mechanism.

This is used to configure group and priority for a given vSGI.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-13-maz@kernel.org

To implement the get/set_irqchip_state callbacks (limited to the
PENDING state), we have to use a particular set of hacks:

- Reading the pending state is done by using a pair of new redistributor
  registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
  state to be retrieved.
- Setting the pending state is done by generating it as we'd otherwise do
  for a guest (writing to GITS_SGIR).
- Clearing the pending state is done by emitting a VSGI command with the
  "clear" bit set.

This requires some interesting locking though:
- When talking to the redistributor, we must make sure that the VPE
  affinity doesn't change, hence taking the VPE lock.
- At the same time, we must ensure that nobody accesses the same
  redistributor's GICR_VSGIR registers for a different VPE, which
  would corrupt the reading of the pending bits. We thus take the
  per-RD spinlock. Much fun.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-12-maz@kernel.org

Implement mask/unmask for virtual SGIs by calling into the
configuration helper.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-11-maz@kernel.org

The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-10-maz@kernel.org

Since GICv4.1 has the capability to inject 16 SGIs into each VPE,
and that I'm keen not to invent too many specific interfaces to
manipulate these interrupts, let's pretend that each of these SGIs
is an actual Linux interrupt.

For that matter, let's introduce a minimal irqchip and irqdomain
setup that will get fleshed up in the following patches.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Reviewed-by: NZenghui Yu <yuzenghui@huawei.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-9-maz@kernel.org

Drop the KVM/arm entries from the MAINTAINERS file.
Signed-off-by: NMarc Zyngier <maz@kernel.org>

Although we have to bounce between HYP and SVC to decompress and
relocate the kernel, we don't need to be able to use it in the
kernel itself. So let's drop the functionnality.

Since the vectors are never changed, there is no need to reset them
either, and nobody calls that stub anyway. The last function
(SOFT_RESTART) is still present in order to support kexec.
Signed-off-by: NMarc Zyngier <maz@kernel.org>

We used to use a set of macros to provide support of vgic-v3 to 32bit
without duplicating everything. We don't need it anymore, so drop it.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will@kernel.org>
Acked-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

Remove all traces of Stage-2 and HYP page table support.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will@kernel.org>
Acked-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

That's it. Remove all references to KVM itself, and document
that although it is no more, the ABI between SVC and HYP still
exists.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will@kernel.org>
Acked-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

Only one platform is building KVM by default. How crazy! Remove
it whilst nobody is watching.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will@kernel.org>
Acked-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

As we're about to drop KVM/arm on the floor, carefully unplug
it from the build system.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWill Deacon <will@kernel.org>
Acked-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

When the call to UV_REGISTER_MEM_SLOT is failing, for instance because
there is not enough free secured memory, the Hypervisor (HV) has to call
UV_RETURN to report the error to the Ultravisor (UV). Then the UV will call
H_SVM_INIT_ABORT to abort the securing phase and go back to the calling VM.

If the kvm->arch.secure_guest is not set, in the return path rfid is called
but there is no valid context to get back to the SVM since the Hcall has
been routed by the Ultravisor.

Move the setting of kvm->arch.secure_guest earlier in
kvmppc_h_svm_init_start() so in the return path, UV_RETURN will be called
instead of rfid.

Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NLaurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: NRam Pai <linuxram@us.ibm.com>
Tested-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

The Hcall named H_SVM_* are reserved to the Ultravisor. However, nothing
prevent a malicious VM or SVM to call them. This could lead to weird result
and should be filtered out.

Checking the Secure bit of the calling MSR ensure that the call is coming
from either the Ultravisor or a SVM. But any system call made from a SVM
are going through the Ultravisor, and the Ultravisor should filter out
these malicious call. This way, only the Ultravisor is able to make such a
Hcall.

Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NLaurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: NRam Pai <linuxram@us.ibnm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

kvmppc_uvmem_init checks for Ultravisor support and returns early if
it is not present. Calling kvmppc_uvmem_free at module exit will cause
an Oops:

$ modprobe -r kvm-hv

  Oops: Kernel access of bad area, sig: 11 [#1]
  <snip>
  NIP:  c000000000789e90 LR: c000000000789e8c CTR: c000000000401030
  REGS: c000003fa7bab9a0 TRAP: 0300   Not tainted  (5.6.0-rc6-00033-g6c90b86a-dirty)
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 24002282  XER: 00000000
  CFAR: c000000000dae880 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 1
  GPR00: c000000000789e8c c000003fa7babc30 c0000000016fe500 0000000000000000
  GPR04: 0000000000000000 0000000000000006 0000000000000000 c000003faf205c00
  GPR08: 0000000000000000 0000000000000001 000000008000002d c00800000ddde140
  GPR12: c000000000401030 c000003ffffd9080 0000000000000001 0000000000000000
  GPR16: 0000000000000000 0000000000000000 000000013aad0074 000000013aaac978
  GPR20: 000000013aad0070 0000000000000000 00007fffd1b37158 0000000000000000
  GPR24: 000000014fef0d58 0000000000000000 000000014fef0cf0 0000000000000001
  GPR28: 0000000000000000 0000000000000000 c0000000018b2a60 0000000000000000
  NIP [c000000000789e90] percpu_ref_kill_and_confirm+0x40/0x170
  LR [c000000000789e8c] percpu_ref_kill_and_confirm+0x3c/0x170
  Call Trace:
  [c000003fa7babc30] [c000003faf2064d4] 0xc000003faf2064d4 (unreliable)
  [c000003fa7babcb0] [c000000000400e8c] dev_pagemap_kill+0x6c/0x80
  [c000003fa7babcd0] [c000000000401064] memunmap_pages+0x34/0x2f0
  [c000003fa7babd50] [c00800000dddd548] kvmppc_uvmem_free+0x30/0x80 [kvm_hv]
  [c000003fa7babd80] [c00800000ddcef18] kvmppc_book3s_exit_hv+0x20/0x78 [kvm_hv]
  [c000003fa7babda0] [c0000000002084d0] sys_delete_module+0x1d0/0x2c0
  [c000003fa7babe20] [c00000000000b9d0] system_call+0x5c/0x68
  Instruction dump:
  3fc2001b fb81ffe0 fba1ffe8 fbe1fff8 7c7f1b78 7c9c2378 3bde4560 7fc3f378
  f8010010 f821ff81 486249a1 60000000 <e93f0008> 7c7d1b78 712a0002 40820084
  ---[ end trace 5774ef4dc2c98279 ]---

So this patch checks if kvmppc_uvmem_init actually allocated anything
before running kvmppc_uvmem_free.

Fixes: ca9f4942 ("KVM: PPC: Book3S HV: Support for running secure guests")
Cc: stable@vger.kernel.org # v5.5+
Reported-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NFabiano Rosas <farosas@linux.ibm.com>
Tested-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Gracefully handle faults on VMXON, e.g. #GP due to VMX being disabled by
BIOS, instead of letting the fault crash the system.  Now that KVM uses
cpufeatures to query support instead of reading MSR_IA32_FEAT_CTL
directly, it's possible for a bug in a different subsystem to cause KVM
to incorrectly attempt VMXON[*].  Crashing the system is especially
annoying if the system is configured such that hardware_enable() will
be triggered during boot.

Oppurtunistically rename @addr to @vmxon_pointer and use a named param
to reference it in the inline assembly.

Print 0xdeadbeef in the ultra-"rare" case that reading MSR_IA32_FEAT_CTL
also faults.

[*] https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.comSigned-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-4-sean.j.christopherson@intel.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>