The codes related use_dma_api is useless which should be removed.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.

Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add specific states for qm and qp, every state change under critical region
to prevent from race condition. Meanwhile, qp state change will also depend
on qm state.

Due to the introduction of these states, it is necessary to pay attention
to the calls of public logic, such as concurrent scenarios resetting and
releasing queue will call hisi_qm_stop, which needs to add additional
status to distinguish and process.
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

put q_num_set similar code into qm to reduce the redundancy.
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Misc fixes on coding style:
1.Merge QM initialization code into a function
2.Merge QM's PF and VF initialization into a function
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Misc fixes on coding style:
1.Merge pre-initialization and initialization of QM
2.Package the initialization of QM's PF and VF into a function
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adjust the position of SMMU status check and
SEC queue initialization in SEC probe
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sec_dfx_regs is never changed and can therefore be made const.

This allows the compiler to put it in the text section instead of the
data section.

Before:
   text    data     bss     dec     hex filename
  17982    7312     480   25774    64ae drivers/crypto/hisilicon/sec2/sec_main.o

After:
   text    data     bss     dec     hex filename
  18366    6928     480   25774    64ae drivers/crypto/hisilicon/sec2/sec_main.o
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

hzip_dfx_regs is never changed and can be made const.

This allows the compiler to put it in the text section instead of the
data section.

Before:
   text    data     bss     dec     hex filename
  15236    6160     480   21876    5574 drivers/crypto/hisilicon/zip/zip_main.o

After:
   text    data     bss     dec     hex filename
  15620    5776     480   21876    5574 drivers/crypto/hisilicon/zip/zip_main.o
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

hpre_cluster_dfx_regs and hpre_com_dfx_regs are never changed and can
therefore be made const.

This allows the compiler to put it in the text section instead of the
data section.

Before:
   text    data     bss     dec     hex filename
  16455    6288     480   23223    5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o

After:
   text    data     bss     dec     hex filename
  16839    5904     480   23223    5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

pid_cd_regs and debug_regs are never changed and can therefore be made
const.

This allows the compiler to put it in the text section instead of the
data section.

Before:
   text    data     bss     dec     hex filename
   2871    2320      64    5255    1487 drivers/crypto/ccree/cc_debugfs.o

After:
   text    data     bss     dec     hex filename
   3255    1936      64    5255    1487 drivers/crypto/ccree/cc_debugfs.o
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When building for ARMv7-M, clang-9 or higher tries to unroll some loops,
which ends up confusing the register allocator to the point of generating
rather bad code and using more than the warning limit for stack frames:

warning: stack frame size of 1200 bytes in function 'blake2b_compress' [-Wframe-larger-than=]

Forcing it to not unroll the final loop avoids this problem.

Fixes: 91d68933 ("crypto: blake2b - add blake2b generic implementation")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This reverts commit 85fc78b8 as
a different fix has already been applied in the sound-asoc tree
and this patch is no longer required.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reported-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1).  This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.

Remove this header and fold it into <crypto/sha.h> which already
contains constants and functions for SHA-1 (along with SHA-2).
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1).  This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.

Most files that include this header don't actually need it.  So in
preparation for removing it, remove all these unneeded includes of it.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The library implementation of the SHA-1 compression function is
confusingly called just "sha_transform()".  Alongside it are some "SHA_"
constants and "sha_init()".  Presumably these are left over from a time
when SHA just meant SHA-1.  But now there are also SHA-2 and SHA-3, and
moreover SHA-1 is now considered insecure and thus shouldn't be used.

Therefore, rename these functions and constants to make it very clear
that they are for SHA-1.  Also add a comment to make it clear that these
shouldn't be used.

For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to
SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that
it matches the same definition in <crypto/sha.h>.  This prepares for
merging <linux/cryptohash.h> into <crypto/sha.h>.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Prefix the s390 SHA-1 functions with "s390_sha1_" rather than "sha1_".
This allows us to rename the library function sha_init() to sha1_init()
without causing a naming collision.

Cc: linux-s390@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Prefix the PowerPC SHA-1 functions with "powerpc_sha1_" rather than
"sha1_".  This allows us to rename the library function sha_init() to
sha1_init() without causing a naming collision.

Cc: linuxppc-dev@lists.ozlabs.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The PowerPC implementation of SHA-1 doesn't actually use the 16-word
temporary array that's passed to the assembly code.  This was probably
meant to correspond to the 'W' array that lib/sha1.c uses.  However, in
sha1-powerpc-asm.S these values are actually stored in GPRs 16-31.

Referencing SHA_WORKSPACE_WORDS from this code also isn't appropriate,
since it's an implementation detail of lib/sha1.c.

Therefore, just remove this unneeded array.

Tested with:

	export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
	make mpc85xx_defconfig
	cat >> .config << EOF
	# CONFIG_MODULES is not set
	# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
	CONFIG_DEBUG_KERNEL=y
	CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
	CONFIG_CRYPTO_SHA1_PPC=y
	EOF
	make olddefconfig
	make -j32
	qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
		-kernel arch/powerpc/boot/zImage \
		-append "cryptomgr.fuzz_iterations=1000 cryptomgr.panic_on_fail=1"

Cc: linuxppc-dev@lists.ozlabs.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In preparation for naming the SHA-1 stuff in <linux/cryptohash.h>
properly and moving it to a more appropriate header, fix the HMAC-SHA256
code in mptcp_crypto_hmac_sha() to use SHA256_BLOCK_SIZE instead of
"SHA_MESSAGE_BYTES" which is actually the SHA-1 block size.
(Fortunately these are both 64 bytes, so this wasn't a "real" bug...)

Cc: Paolo Abeni <pabeni@redhat.com>
Cc: mptcp@lists.01.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: keyrings@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: linux-sctp@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: linux-mtd@lists.infradead.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: linux-nfs@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: ecryptfs@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Kamil Konieczny <k.konieczny@samsung.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.

Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Lars Persson <lars.persson@axis.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently the simplest use of the shash API is to use
crypto_shash_digest() to digest a whole buffer.  However, this still
requires allocating a hash descriptor (struct shash_desc).  Many users
don't really want to preallocate one and instead just use a one-off
descriptor on the stack like the following:

	{
		SHASH_DESC_ON_STACK(desc, tfm);
		int err;

		desc->tfm = tfm;

		err = crypto_shash_digest(desc, data, len, out);

		shash_desc_zero(desc);
	}

Wrap this in a new helper function crypto_shash_tfm_digest() that can be
used instead of the above.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>