- 08 12月, 2017 14 次提交
-
-
由 Russell King 提交于
Both the primary and overlay planes retire framebuffers in a similar manner; this can be consolidated by moving the retirement up to the armada_plane_work layer. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Move the overlay plane work out from under the spinlock so that both the primary and overlay planes run their work in the same context. This is necessary so that we can use frame works with the overlay plane. However, we must update the CRTC registers under the spinlock, so fix up the overlay code for that. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Clear the plane enable bit in the software state within armada_drm_plane_disable() when disabling either the primary or overlay planes. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Merge armada_drm_primary_disable() into armada_drm_crtc_plane_disable() and rename to armada_drm_plane_disable(). Use this to simplify armada_ovl_plane_disable(). Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Add our own hook to allow the primary plane to be disabled. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Wait for a second, and if we time out, cancel any pending work when disabling the primary plane. This ensures that any pending work is completed or cleaned up prior to the disable taking effect. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Add a work cancel callback, so that work items can add functionality to clean themselves up when they are cancelled. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Store the plane in the armada_plane_work structure rather than passing it around; it doesn't get used very much in the work structures, so passing it around is a needless expense. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Add and use a common frame work allocator, initialising the frame work to a sane state. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
armada_drm_plane_work_cancel()'s returned work structure is never used or referenced, so it's pointless returning it. It's also pointless because the caller doesn't have a clue what kind of work structure it is. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
We weren't correctly calculating the YUV planar offsets for subsampled chroma planes correctly - fix up the coordinates for planes 1 and 2. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Lookup the drm_format_info structure once when computing all the framebuffer plane addresses by using drm_format_info(), rather than repetitive lookups via drm_format_plane_cpp(). Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Avoid powering down the overlay SRAM banks when disabling the primary plane, thereby masking any overlay video. This feature is supposed to allow us to cut the bandwidth required while displaying full-frame overlay video. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Fix the leak of the CRTC structure in the failure paths of armada_drm_crtc_create(). Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
- 17 10月, 2017 2 次提交
-
-
由 Haneen Mohammed 提交于
This patch replace instances of drm_framebuffer_reference/unreference with *_get/put() suffixes, because get/put is shorter and consistent with the kernel use of *_get/put suffixes. This was done with the following Coccinelle script: @r1@ expression e; @@ ( -drm_framebuffer_reference(e); +drm_framebuffer_get(e); | -drm_framebuffer_unreference(e); +drm_framebuffer_put(e); ) Signed-off-by: NHaneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/e1df1b3375faa819029559b11c32e10501c5c5d6.1505932812.git.hamohammed.sa@gmail.com
-
由 Haneen Mohammed 提交于
This patch replace instances of drm_gem_object_reference/unreference with *_get/put() suffixes, because get/put is shorter and consistent with the kernel use of *_get/put() suffixes. This was done with the following Coccinelle script: @r1@ expression e; @@ ( -drm_gem_object_reference(e); +drm_gem_object_get(e); | -drm_gem_object_unreference(e); +drm_gem_object_put(e); | -drm_gem_object_unreference_unlocked(e); +drm_gem_object_put_unlocked(e); ) Signed-off-by: NHaneen Mohammed <hamohammed.sa@gmail.com> [resolved small conflict with removed armada_gem_dumb_map_offset] Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/a59ef1ed109ade897bcffcb01b33214262db8942.1505932812.git.hamohammed.sa@gmail.com
-
- 04 8月, 2017 1 次提交
-
-
由 Peter Rosin 提交于
The redundant fb helpers .gamma_set and .gamma_get are no longer used. Remove the dead code. Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NPeter Rosin <peda@axentia.se> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-6-peda@axentia.se
-
- 02 8月, 2017 1 次提交
-
-
由 Ben Widawsky 提交于
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: NBen Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Stone <daniels@collabora.com>
-
- 26 7月, 2017 1 次提交
-
-
由 Rob Herring 提交于
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: NRob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 7月, 2017 1 次提交
-
-
由 Arvind Yadav 提交于
drm_prop_enum_lists are not supposed to change at runtime. All functions working with drm_prop_enum_list provided by <drm/drm_property.h> work with const drm_prop_enum_list. So mark the non-const structs as const. File size before: text data bss dec hex filename 9629 744 0 10373 2885 drivers/gpu/drm/armada/armada_crtc.o File size After adding 'const': text data bss dec hex filename 9757 616 0 10373 2885 drivers/gpu/drm/armada/armada_crtc.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/d2344c4dc40238cfe48fa6d917767df0f053150a.1498902844.git.arvind.yadav.cs@gmail.com
-
- 21 6月, 2017 1 次提交
-
-
由 Arvind Yadav 提交于
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 8836 744 0 9580 256c drivers/gpu/drm/armada/armada_crtc.o File size after constify armada_lcd_of_match: text data bss dec hex filename 9220 328 0 9548 254c drivers/gpu/drm/armada/armada_crtc.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/ff9a9a908cf347775ab62cfadfde986de72dcf13.1497935382.git.arvind.yadav.cs@gmail.com
-
- 29 3月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
Again just going through the motions, no functional changes in here. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
-
- 08 2月, 2017 1 次提交
-
-
由 Shawn Guo 提交于
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. As the result, functions armada_drm_crtc_enable[disable]_irq() can be static, although they are moved around a bit to save forward declaration. The armada_crtc pointer array in struct armada_private is still kept in there, because armada_debugfs.c still have reference to it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-7-git-send-email-shawnguo@kernel.org
-
- 15 12月, 2016 5 次提交
-
-
由 Ville Syrjälä 提交于
Rather than compare the format u32s of two format infos, we can direclty compare the format info pointers themselves. Noramlly all the ->format pointers all point to somwehere in the big array, so this is a valid way to test for equality. Also drivers may want to point ->format at a private format info struct instead (eg. for special compressed formats with extra planes), so just comparing the pixel format values wouldn't necessaritly even work. But comparing the pointers will also take care of that case. @@ struct drm_framebuffer *a; struct drm_framebuffer *b; @@ ( - a->format->format != b->format->format + a->format != b->format | - a->format->format == b->format->format + a->format == b->format ) @@ struct drm_plane_state *a; struct drm_plane_state *b; @@ ( - a->fb->format->format != b->fb->format->format + a->fb->format != b->fb->format | - a->fb->format->format == b->fb->format->format + a->fb->format == b->fb->format ) @@ struct drm_crtc *crtc; struct drm_framebuffer *x; @@ ( - crtc->primary->fb->format->format != x->format->format + crtc->primary->fb->format != x->format | - x->format->format != crtc->primary->fb->format->format + x->format != crtc->primary->fb->format ) @@ struct drm_mode_set *set; @@ - set->fb->format->format != set->crtc->primary->fb->format->format + set->fb->format != set->crtc->primary->fb->format Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-35-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Ville Syrjälä 提交于
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Replace drm_format_plane_cpp(fb->pixel_format) with just fb->format->cpp[]. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; expression E; @@ ( - drm_format_plane_cpp(a->pixel_format, E) + a->format->cpp[E] | - drm_format_plane_cpp(b.pixel_format, E) + b.format->cpp[E] ) @@ struct drm_plane_state *a; struct drm_plane_state b; expression E; @@ ( - drm_format_plane_cpp(a->fb->pixel_format, E) + a->fb->format->cpp[E] | - drm_format_plane_cpp(b.fb->pixel_format, E) + b.fb->format->cpp[E] ) @@ struct drm_framebuffer *a; identifier T; expression E; @@ T = a->pixel_format <+... - drm_format_plane_cpp(T, E) + a->format->cpp[E] ...+> @@ struct drm_framebuffer b; identifier T; expression E; @@ T = b.pixel_format <+... - drm_format_plane_cpp(T, E) + b.format->cpp[E] ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Replace drm_format_num_planes(fb->pixel_format) with just fb->format->num_planes. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - drm_format_num_planes(a->pixel_format) + a->format->num_planes | - drm_format_num_planes(b.pixel_format) + b.format->num_planes ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - drm_format_num_planes(a->fb->pixel_format) + a->fb->format->num_planes | - drm_format_num_planes(b.fb->pixel_format) + b.fb->format->num_planes ) @@ struct drm_framebuffer *a; identifier T; @@ T = a->pixel_format <+... - drm_format_num_planes(T) + a->format->num_planes ...+> @@ struct drm_framebuffer b; identifier T; @@ T = b.pixel_format <+... - drm_format_num_planes(T) + b.format->num_planes ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com
-
- 02 11月, 2016 6 次提交
-
-
由 Russell King 提交于
Use a common helper to calculate the plane base address(es) for the framebuffer. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Move the setting of the primary plane position into armada_drm_primary_set() rather than the initialisation function. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Split out the primary plane update from the mode setting. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Move more of the Armada plane state (source size, and displayed size and position) into a state structure inside struct armada_plane. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Make armada_drm_plane_work_run() take the drm_plane pointer rather than our private pointer. This allows us to localise the conversion between these two pointers inside armada_drm_plane_work_run(), rather than at every call site. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
Add tracing support to the Armada video overlay and interrupt code. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
- 05 10月, 2016 1 次提交
-
-
由 Russell King 提交于
The DPMS handling wrt clock enables/disables was incorrect: we could end up decrementing the clock count multiple times if we transition via several low-power DPMS states, resulting in a kernel warning. Fix this by only testing to see whether we are entering or exiting the DPMS off state. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
- 12 7月, 2016 1 次提交
-
-
由 Gustavo Padovan 提交于
Remove legacy usage of drm_handle_vblank() Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-2-git-send-email-gustavo@padovan.org
-
- 07 6月, 2016 2 次提交
-
-
由 Gustavo Padovan 提交于
Replace the legacy drm_vblank_{get,put}() with the new helper functions. Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-9-git-send-email-gustavo@padovan.org
-
由 Gustavo Padovan 提交于
Replace the legacy drm_send_vblank_event() with the new helper function. Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-2-git-send-email-gustavo@padovan.org
-
- 19 5月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
After drm_gem_object_lookup() was changed along with all its callers, we have several drivers that have unused variables: drm/armada/armada_crtc.c: In function 'armada_drm_crtc_cursor_set': drm/armada/armada_crtc.c:900:21: error: unused variable 'dev' [-Werror=unused-variable] drm/nouveau/nouveau_gem.c: In function 'validate_init': drm/nouveau/nouveau_gem.c:371:21: error: unused variable 'dev' [-Werror=unused-variable] drm/nouveau/nv50_display.c: In function 'nv50_crtc_cursor_set': drm/nouveau/nv50_display.c:1308:21: error: unused variable 'dev' [-Werror=unused-variable] drm/radeon/radeon_cs.c: In function 'radeon_cs_parser_relocs': drm/radeon/radeon_cs.c:77:21: error: unused variable 'ddev' [-Werror=unused-variable] This fixes all the instances I found with ARM randconfig builds so far. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: a8ad0bd8 ("drm: Remove unused drm_device from drm_gem_object_lookup()") Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463587653-3035181-6-git-send-email-arnd@arndb.de
-
- 17 5月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-