Advertise ARM64_HAS_DCPODP when both DC CVAP and DC CVADP are supported.

Even though we don't use this feature now, we provide it for consistency
with DCPOP and anticipate it being used in the future.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Allow users of dcache_by_line_op to specify cvadp as an op.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ARMv8.5 builds upon the ARMv8.2 DC CVAP instruction by introducing a DC
CVADP instruction which cleans the data cache to the point of deep
persistence. Let's expose this support via the arm64 ELF hwcaps.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The ARMv8.5 DC CVADP instruction may be trapped to EL1 via
SCTLR_EL1.UCI therefore let's provide a handler for it.

Just like the CVAP instruction we use a 'sys' instruction instead of
the 'dc' alias to avoid build issues with older toolchains.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The introduction of AT_HWCAP2 introduced accessors which ensure that
hwcap features are set and tested appropriately.

Let's now mandate access to elf_hwcap via these accessors by making
elf_hwcap static within cpufeature.c.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

As we will exhaust the first 32 bits of AT_HWCAP let's start
exposing AT_HWCAP2 to userspace to give us up to 64 caps.

Whilst it's possible to use the remaining 32 bits of AT_HWCAP, we
prefer to expand into AT_HWCAP2 in order to provide a consistent
view to userspace between ILP32 and LP64. However internal to the
kernel we prefer to continue to use the full space of elf_hwcap.

To reduce complexity and allow for future expansion, we now
represent hwcaps in the kernel as ordinals and use a
KERNEL_HWCAP_ prefix. This allows us to support automatic feature
based module loading for all our hwcaps.

We introduce cpu_set_feature to set hwcaps which complements the
existing cpu_have_feature helper. These helpers allow us to clean
up existing direct uses of elf_hwcap and reduce any future effort
required to move beyond 64 caps.

For convenience we also introduce cpu_{have,set}_named_feature which
makes use of the cpu_feature macro to allow providing a hwcap name
without a {KERNEL_}HWCAP_ prefix.
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
[will: use const_ilog2() and tweak documentation]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Add regs_get_argument() which returns N th argument of the function
call. On arm64, it supports up to 8th argument.
Note that this chooses most probably assignment, in some case
it can be incorrect (e.g. passing data structure or floating
point etc.)

This enables ftrace kprobe events to access kernel function
arguments via $argN syntax.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
[will: tidied up the comment a bit]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, compat tasks running on arm64 can allocate memory up to
TASK_SIZE_32 (UL(0x100000000)).

This means that mmap() allocations, if we treat them as returning an
array, are not compliant with the sections 6.5.8 of the C standard
(C99) which states that: "If the expression P points to an element of
an array object and the expression Q points to the last element of the
same array object, the pointer expression Q+1 compares greater than P".

Redefine TASK_SIZE_32 to address the issue.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
[will: fixed typo in comment]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Switch from per mm_struct to per pmd page table lock by enabling
ARCH_ENABLE_SPLIT_PMD_PTLOCK. This provides better granularity for
large system.

I'm not sure if there is contention on mm->page_table_lock. Given
the option comes at no cost (apart from initializing more spin
locks), why not enable it now.

We only do so when pmd is not folded, so we don't mistakenly call
pgtable_pmd_page_ctor() on pud or p4d in pgd_pgtable_alloc().
Signed-off-by: NYu Zhao <yuzhao@google.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ARM64 standard pgtable functions are going to use pgtable_page_[ctor|dtor]
or pgtable_pmd_page_[ctor|dtor] constructs. At present KVM guest stage-2
PUD|PMD|PTE level page tabe pages are allocated with __get_free_page()
via mmu_memory_cache_alloc() but released with standard pud|pmd_free() or
pte_free_kernel(). These will fail once they start calling into pgtable_
[pmd]_page_dtor() for pages which never originally went through respective
constructor functions. Hence convert all stage-2 page table page release
functions to call buddy directly while freeing pages.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: NYu Zhao <yuzhao@google.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

kprobes and uprobes reserve some BRK immediates for installing their
probes. Define these along with the other reservations in brk-imm.h
and rename the ESR definitions to be consistent with the others that we
already have.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Kprobes bypasses our debug hook registration code so that it doesn't
get tangled up with recursive debug exceptions from things like lockdep:

  http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/324385.html

However, since then, (a) the hook list has become RCU protected and (b)
the kprobes hooks were found not to filter out exceptions from userspace
correctly. On top of that, the step handler is invoked directly from
single_step_handler(), which *does* use the debug hook list, so it's
clearly not the end of the world.

For now, have kprobes use the debug hook registration API like everybody
else. We can revisit this in the future if this is found to limit
coverage significantly.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Mixing kernel and user debug hooks together is highly error-prone as it
relies on all of the hooks to figure out whether the exception came from
kernel or user, and then to act accordingly.

Make our debug hook code a little more robust by maintaining separate
hook lists for user and kernel, with separate registration functions
to force callers to be explicit about the exception levels that they
care about.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Following assembly code is not trivial; make it slightly easier to read by
replacing some of the magic numbers with the defines which are already
present in sysreg.h.
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NAlexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

show_pte() doesn't have any external callers, so make it static.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When halting a guest, QEMU flushes the virtual ITS caches, which
amounts to writing to the various tables that the guest has allocated.

When doing this, we fail to take the srcu lock, and the kernel
shouts loudly if running a lockdep kernel:

[   69.680416] =============================
[   69.680819] WARNING: suspicious RCU usage
[   69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted
[   69.682096] -----------------------------
[   69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[   69.683225]
[   69.683225] other info that might help us debug this:
[   69.683225]
[   69.683975]
[   69.683975] rcu_scheduler_active = 2, debug_locks = 1
[   69.684598] 6 locks held by qemu-system-aar/4097:
[   69.685059]  #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[   69.686087]  #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[   69.686919]  #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.687698]  #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.688475]  #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.689978]  #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[   69.690729]
[   69.690729] stack backtrace:
[   69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18
[   69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[   69.692831] Call trace:
[   69.694072]  lockdep_rcu_suspicious+0xcc/0x110
[   69.694490]  gfn_to_memslot+0x174/0x190
[   69.694853]  kvm_write_guest+0x50/0xb0
[   69.695209]  vgic_its_save_tables_v0+0x248/0x330
[   69.695639]  vgic_its_set_attr+0x298/0x3a0
[   69.696024]  kvm_device_ioctl_attr+0x9c/0xd8
[   69.696424]  kvm_device_ioctl+0x8c/0xf8
[   69.696788]  do_vfs_ioctl+0xc8/0x960
[   69.697128]  ksys_ioctl+0x8c/0xa0
[   69.697445]  __arm64_sys_ioctl+0x28/0x38
[   69.697817]  el0_svc_common+0xd8/0x138
[   69.698173]  el0_svc_handler+0x38/0x78
[   69.698528]  el0_svc+0x8/0xc

The fix is to obviously take the srcu lock, just like we do on the
read side of things since bf308242. One wonders why this wasn't
fixed at the same time, but hey...

Fixes: bf308242 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Adding the MIDR encodings for HiSilicon Taishan v110 CPUs,
which is used in Kunpeng ARM64 server SoCs. TSV110 is the
abbreviation of Taishan v110.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NZhangshaokun <zhangshaokun@hisilicon.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Fujitsu erratum 010001 applies to A64FX v0r0 and v1r0, and we try to
handle either by masking MIDR with MIDR_FUJITSU_ERRATUM_010001_MASK
before comparing it to MIDR_FUJITSU_ERRATUM_010001.

Unfortunately, MIDR_FUJITSU_ERRATUM_010001 is constructed incorrectly
using MIDR_VARIANT(), which is intended to extract the variant field
from MIDR_EL1, rather than generate the field in-place. This results in
MIDR_FUJITSU_ERRATUM_010001 being all-ones, and we only match A64FX
v0r0.

This patch uses MIDR_CPU_VAR_REV() to generate an in-place mask for the
variant field, ensuring the we match both v0r0 and v1r0.

Fixes: 3e32131a ("arm64: Add workaround for Fujitsu A64FX erratum 010001")
Reported-by: N"Okamoto, Takayuki" <tokamoto@jp.fujitsu.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: fixed the patch author]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.

um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Let arm64 subscribe to the previously added framework in which
architecture can inform whether a given huge page size is supported for
migration.  This just overrides the default function
arch_hugetlb_migration_supported() and enables migration for all
possible HugeTLB page sizes on arm64.

With this, HugeTLB migration support on arm64 now covers all possible
HugeTLB options.

          CONT PTE    PMD    CONT PMD    PUD
          --------    ---    --------    ---
  4K:        64K      2M        32M      1G
  16K:        2M     32M         1G
  64K:        2M    512M        16G

Link: http://lkml.kernel.org/r/1545121450-1663-6-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NSteve Capper <steve.capper@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use after scope bugs detector seems to be almost entirely useless for
the linux kernel.  It exists over two years, but I've seen only one
valid bug so far [1].  And the bug was fixed before it has been
reported.  There were some other use-after-scope reports, but they were
false-positives due to different reasons like incompatibility with
structleak plugin.

This feature significantly increases stack usage, especially with GCC <
9 version, and causes a 32K stack overflow.  It probably adds
performance penalty too.

Given all that, let's remove use-after-scope detector entirely.

While preparing this patch I've noticed that we mistakenly enable
use-after-scope detection for clang compiler regardless of
CONFIG_KASAN_EXTRA setting.  This is also fixed now.

[1] http://lkml.kernel.org/r/<20171129052106.rhgbjhhis53hkgfn@wfg-t540p.sh.intel.com>

Link: http://lkml.kernel.org/r/20190111185842.13978-1-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Will Deacon <will.deacon@arm.com>		[arm64]
Cc: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function).  It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.

Which in the kernel is always KERNEL_DS.

Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.

Roughly scripted with

   git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
   git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'

plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.

The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.
Inspired-by: NJann Horn <jannh@google.com>
Inspired-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0bd3ef34.

There is ongoing work on objtool to identify incorrect uses of
user_access_{begin,end}. Until this is sorted, do not enable the
functionality on arm64. Also, on ARMv8.2 CPUs with hardware PAN and UAO
support, there is no obvious performance benefit to the unsafe user
accessors.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Building a preprocessed source file for arm64 now always produces
a warning with clang because of the page_to_virt() macro assigning
a variable to itself.

Adding a new temporary variable avoids this issue.

Fixes: 2813b9c0 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Reviewed-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Ensure that inX() provides the same ordering guarantees as readX()
by hooking up __io_par() so that it maps directly to __iormb().
Reported-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

On the Fujitsu-A64FX cores ver(1.0, 1.1), memory access may cause
an undefined fault (Data abort, DFSC=0b111111). This fault occurs under
a specific hardware condition when a load/store instruction performs an
address translation. Any load/store instruction, except non-fault access
including Armv8 and SVE might cause this undefined fault.

The TCR_ELx.NFD1 bit is used by the kernel when CONFIG_RANDOMIZE_BASE
is enabled to mitigate timing attacks against KASLR where the kernel
address space could be probed using the FFR and suppressed fault on
SVE loads.

Since this erratum causes spurious exceptions, which may corrupt
the exception registers, we clear the TCR_ELx.NFDx=1 bits when
booting on an affected CPU.
Signed-off-by: NZhang Lei <zhang.lei@jp.fujitsu.com>
[Generated MIDR value/mask for __cpu_setup(), removed spurious-fault handler
 and always disabled the NFDx bits on affected CPUs]
Signed-off-by: NJames Morse <james.morse@arm.com>
Tested-by: Nzhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The assembly macro get_thread_info() actually returns a task_struct and is
analogous to the current/get_current macro/function.

While it could be argued that thread_info sits at the start of
task_struct and the intention could have been to return a thread_info,
instances of loads from/stores to the address obtained from
get_thread_info() use offsets that are generated with
offsetof(struct task_struct, [...]).

Rename get_thread_info() to state it returns a task_struct.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

TIF_USEDFPU is not defined as thread flags for Arm64. So drop it from
the documentation.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NJulien Grall <julien.grall@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since Suzuki K Poulose's work on Dynamic IPA support, KVM_PHYS_SHIFT will
be used only when machine_type's bits[7:0] equal to 0 (by default). Thus
the outdated comment should be fixed.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

On SMP ARM systems, cache maintenance by set/way should only ever be
done in the context of onlining or offlining CPUs, which is typically
done by bare metal firmware and never in a virtual machine. For this
reason, we trap set/way cache maintenance operations and replace them
with conditional flushing of the entire guest address space.

Due to this trapping, the set/way arguments passed into the set/way
ops are completely ignored, and thus irrelevant. This also means that
the set/way geometry is equally irrelevant, and we can simply report
it as 1 set and 1 way, so that legacy 32-bit ARM system software (i.e.,
the kind that only receives odd fixes) doesn't take a performance hit
due to the trapping when iterating over the cachelines.
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We currently permit CPUs in the same system to deviate in the exact
topology of the caches, and we subsequently hide this fact from user
space by exposing a sanitised value of the cache type register CTR_EL0.

However, guests running under KVM see the bare value of CTR_EL0, which
could potentially result in issues with, e.g., JITs or other pieces of
code that are sensitive to misreported cache line sizes.

So let's start trapping cache ID instructions if there is a mismatch,
and expose the sanitised version of CTR_EL0 to guests. Note that CTR_EL0
is treated as an invariant to KVM user space, so update that part as well.
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move this little function to the header files for arm/arm64 so other
code can make use of it directly.
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

At the moment we have separate system register emulation handlers for
each timer register. Actually they are quite similar, and we rely on
kvm_arm_timer_[gs]et_reg() for the actual emulation anyways, so let's
just merge all of those handlers into one function, which just marshalls
the arguments and then hands off to a set of common accessors.
This makes extending the emulation to include EL2 timers much easier.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
[Fixed 32-bit VM breakage and reduced to reworking existing code]
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
[Fixed 32bit host, general cleanup]
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We previously incorrectly named the define for this system register.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>

In preparation for nested virtualization where we are going to have more
than a single VMID per VM, let's factor out the VMID data into a
separate VMID data structure and change the VMID allocator to operate on
this new structure instead of using a struct kvm.

This also means that udate_vttbr now becomes update_vmid, and that the
vttbr itself is generated on the fly based on the stage 2 page table
base address and the vmid.

We cache the physical address of the pgd when allocating the pgd to
avoid doing the calculation on every entry to the guest and to avoid
calling into potentially non-hyp-mapped code from hyp/EL2.

If we wanted to merge the VMID allocator with the arm64 ASID allocator
at some point in the future, it should actually become easier to do that
after this patch.

Note that to avoid mapping the kvm_vmid_bits variable into hyp, we
simply forego the masking of the vmid value in kvm_get_vttbr and rely on
update_vmid to always assign a valid vmid value (within the supported
range).
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
[maz: minor cleanups]
Reviewed-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We currently eagerly save/restore MPIDR. It turns out to be
slightly pointless:
- On the host, this value is known as soon as we're scheduled on a
  physical CPU
- In the guest, this value cannot change, as it is set by KVM
  (and this is a read-only register)

The result of the above is that we can perfectly avoid the eager
saving of MPIDR_EL1, and only keep the restore. We just have
to setup the host contexts appropriately at boot time.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>

When running VHE, there is no need to jump via some stub to perform
a "HYP" function call, as there is a single address space.

Let's thus change kvm_call_hyp() and co to perform a direct call
in this case. Although this results in a bit of code expansion,
it allows the compiler to check for type compatibility, something
that we are missing so far.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>

Until now, we haven't differentiated between HYP calls that
have a return value and those who don't. As we're about to
change this, introduce kvm_call_hyp_ret(), and change all
call sites that actually make use of a return value.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>

We don't want new architectures to even provide the old 32-bit time_t
based system calls any more, or define the syscall number macros.

Add a new __ARCH_WANT_TIME32_SYSCALLS macro that gets enabled for all
existing 32-bit architectures using the generic system call table,
so we don't change any current behavior.
Since this symbol is evaluated in user space as well, we cannot use
a Kconfig CONFIG_* macro but have to define it in uapi/asm/unistd.h.

On 64-bit architectures, the same system call numbers mostly refer to
the system calls we want to keep, as they already pass 64-bit time_t.

As new architectures no longer provide these, we need new exceptions
in checksyscalls.sh.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The newer prlimit64 syscall provides all the functionality of getrlimit
and setrlimit syscalls and adds the pid of target process, so future
architectures won't need to include getrlimit and setrlimit.

Therefore drop getrlimit and setrlimit syscalls from the generic syscall
list unless __ARCH_WANT_SET_GET_RLIMIT is defined by the architecture's
unistd.h prior to including asm-generic/unistd.h, and adjust all
architectures using the generic syscall list to define it so that no
in-tree architectures are affected.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-hexagon@vger.kernel.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: NYury Norov <ynorov@caviumnetworks.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: James Hogan <james.hogan@imgtec.com> [metag]
Acked-by: Ley Foon Tan <lftan@altera.com> [nios2]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Will Deacon <will.deacon@arm.com> [arm64]
Acked-by: Vineet Gupta <vgupta@synopsys.com> #arch/arc bits
Signed-off-by: NYury Norov <ynorov@marvell.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>