[   60.988363] ======================================================
[   60.988754] [ INFO: possible circular locking dependency detected ]
[   60.989152] 3.19.0+ #194 Not tainted
[   60.989377] -------------------------------------------------------
[   60.989781] swapper/3/0 is trying to acquire lock:
[   60.990079]  (&(&n_ptr->lock)->rlock){+.-...}, at: [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc]
[   60.990743]
[   60.990743] but task is already holding lock:
[   60.991106]  (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc]
[   60.991738]
[   60.991738] which lock already depends on the new lock.
[   60.991738]
[   60.992174]
[   60.992174] the existing dependency chain (in reverse order) is:
[   60.992174]
-> #1 (&(&bclink->lock)->rlock){+.-...}:
[   60.992174]        [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140
[   60.992174]        [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50
[   60.992174]        [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc]
[   60.992174]        [<ffffffffa0000f57>] tipc_bclink_add_node+0x97/0xf0 [tipc]
[   60.992174]        [<ffffffffa0011815>] tipc_node_link_up+0xf5/0x110 [tipc]
[   60.992174]        [<ffffffffa0007783>] link_state_event+0x2b3/0x4f0 [tipc]
[   60.992174]        [<ffffffffa00193c0>] tipc_link_proto_rcv+0x24c/0x418 [tipc]
[   60.992174]        [<ffffffffa0008857>] tipc_rcv+0x827/0xac0 [tipc]
[   60.992174]        [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc]
[   60.992174]        [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980
[   60.992174]        [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70
[   60.992174]        [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130
[   60.992174]        [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0
[   60.992174]        [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490
[   60.992174]        [<ffffffff8155c1b7>] e1000_clean+0x267/0x990
[   60.992174]        [<ffffffff81647b60>] net_rx_action+0x150/0x360
[   60.992174]        [<ffffffff8105ec43>] __do_softirq+0x123/0x360
[   60.992174]        [<ffffffff8105f12e>] irq_exit+0x8e/0xb0
[   60.992174]        [<ffffffff8179f9f5>] do_IRQ+0x65/0x110
[   60.992174]        [<ffffffff8179da6f>] ret_from_intr+0x0/0x13
[   60.992174]        [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20
[   60.992174]        [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0
[   60.992174]        [<ffffffff81033cda>] start_secondary+0x13a/0x150
[   60.992174]
-> #0 (&(&n_ptr->lock)->rlock){+.-...}:
[   60.992174]        [<ffffffff810a8f7d>] __lock_acquire+0x163d/0x1ca0
[   60.992174]        [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140
[   60.992174]        [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50
[   60.992174]        [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc]
[   60.992174]        [<ffffffffa0001e11>] tipc_bclink_rcv+0x611/0x640 [tipc]
[   60.992174]        [<ffffffffa0008646>] tipc_rcv+0x616/0xac0 [tipc]
[   60.992174]        [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc]
[   60.992174]        [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980
[   60.992174]        [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70
[   60.992174]        [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130
[   60.992174]        [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0
[   60.992174]        [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490
[   60.992174]        [<ffffffff8155c1b7>] e1000_clean+0x267/0x990
[   60.992174]        [<ffffffff81647b60>] net_rx_action+0x150/0x360
[   60.992174]        [<ffffffff8105ec43>] __do_softirq+0x123/0x360
[   60.992174]        [<ffffffff8105f12e>] irq_exit+0x8e/0xb0
[   60.992174]        [<ffffffff8179f9f5>] do_IRQ+0x65/0x110
[   60.992174]        [<ffffffff8179da6f>] ret_from_intr+0x0/0x13
[   60.992174]        [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20
[   60.992174]        [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0
[   60.992174]        [<ffffffff81033cda>] start_secondary+0x13a/0x150
[   60.992174]
[   60.992174] other info that might help us debug this:
[   60.992174]
[   60.992174]  Possible unsafe locking scenario:
[   60.992174]
[   60.992174]        CPU0                    CPU1
[   60.992174]        ----                    ----
[   60.992174]   lock(&(&bclink->lock)->rlock);
[   60.992174]                                lock(&(&n_ptr->lock)->rlock);
[   60.992174]                                lock(&(&bclink->lock)->rlock);
[   60.992174]   lock(&(&n_ptr->lock)->rlock);
[   60.992174]
[   60.992174]  *** DEADLOCK ***
[   60.992174]
[   60.992174] 3 locks held by swapper/3/0:
[   60.992174]  #0:  (rcu_read_lock){......}, at: [<ffffffff81646791>] __netif_receive_skb_core+0x71/0x980
[   60.992174]  #1:  (rcu_read_lock){......}, at: [<ffffffffa0002c35>] tipc_l2_rcv_msg+0x5/0xd0 [tipc]
[   60.992174]  #2:  (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc]
[   60.992174]

The correct the sequence of grabbing n_ptr->lock and bclink->lock
should be that the former is first held and the latter is then taken,
which exactly happened on CPU1. But especially when the retransmission
of broadcast link is failed, bclink->lock is first held in
tipc_bclink_rcv(), and n_ptr->lock is taken in link_retransmit_failure()
called by tipc_link_retransmit() subsequently, which is demonstrated on
CPU0. As a result, deadlock occurs.

If the order of holding the two locks happening on CPU0 is reversed, the
deadlock risk will be relieved. Therefore, the node lock taken in
link_retransmit_failure() originally is moved to tipc_bclink_rcv()
so that it's obtained before bclink lock. But the precondition of
the adjustment of node lock is that responding to bclink reset event
must be moved from tipc_bclink_unlock() to tipc_node_unlock().
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

received is 0, no need to minus it and use "+=" to reassign it
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

Hi David, this patch set includes 2 feature additions to the be2net driver:

Patch 1 sets up cpu affinity hints for be2net irqs using the
cpumask_set_cpu_local_first() API that first picks the near numa cores
and when they are exhausted, selects the far numa cores.

Patch 2 setups up xps queue mapping for be2net's TXQs to avoid,
by default, TX lock contention.

Patch 3 just bumps up the driver version.

Pls consider applying this patch set to the net-next queue. Thanks!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch sets up xps queue mapping on load, so that TX traffic is
steered to the queue whose irqs are being processed by the current cpu.
This helps in avoiding TX lock contention.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch provides hints to irqbalance to map be2net IRQs to
specific CPU cores. cpumask_set_cpu_local_first() is used, which first
maps IRQs to near NUMA cores; when those cores are exhausted, IRQs are
mapped to far NUMA cores.
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 1fb6f159 ("tcp: add tcp_conn_request"),
tcp_syn_flood_action() is no longer used from IPv6.

We can make it static, by moving it above tcp_conn_request()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4_fcoe.c:49:9-10: WARNING: return of 0/1 in function 'cxgb_fcoe_sof_eof_supported' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci

CC: Varun Prakash <varun@chelsio.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not commit the new ops until we finish
all the setup, otherwise we have to NULL it on failure.
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Petri Gynther says:

====================
net: bcmgenet: multiple Rx queues support

Final patch set to add support for multiple Rx queues:
1. remove priv->int0_mask and priv->int1_mask
2. modify Tx ring int_enable and int_disable vectors
3. simplify bcmgenet_init_dma()
4. tweak init_umac()
5. rework Tx NAPI code
6. rework Rx NAPI code
7. add support for multiple Rx queues
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for multiple Rx queues:
1. Add NAPI context per Rx queue
2. Modify Rx interrupt and Rx NAPI code to handle multiple Rx queues
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce new bcmgenet functions to handle the NAPI calls to:
netif_napi_add()
napi_enable()
napi_disable()
netif_napi_del()
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce new bcmgenet functions to handle the NAPI calls to:
netif_napi_add()
napi_enable()
napi_disable()
netif_napi_del()
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use more meaningful variable names int0_enable and int1_enable when
enabling bcmgenet interrupts.

For Rx default queue interrupts, use:
UMAC_IRQ_RXDMA_BDONE | UMAC_IRQ_RXDMA_PDONE

For Tx default queue interrupts, use:
UMAC_IRQ_TXDMA_BDONE | UMAC_IRQ_TXDMA_PDONE
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do the two kcalloc() calls first, before proceeding into Rx/Tx DMA init.
Makes the error case handling much simpler.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NJaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary function parameter priv. Use ring->priv instead.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unused priv->int0_mask and priv->int1_mask.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Iyappan Subramanian says:

====================
drivers: net: xgene: Add separate tx completion ring

SGMII based 1GbE and 10GbE interfaces support multiple interrupts.
Adding separate tx completion descriptor ring and associating a dedicated irq for the TX completion.
====================
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>

- Added wrapper functions around napi_add, napi_del, napi_enable and napi_disable
- Moved platform_get_irq function call after reading phy_mode
- Associating the new irq to tx completion for the supported ethernet interfaces
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: some improvements and fixes

We introduce a better algorithm for selecting when and which
users should be subject to link congestion control, plus clean
up some code for that mechanism.
Commit #3 fixes another rare race condition during packet reception.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Despite recent improvements, the establishment of dual parallel
links still has a small glitch where messages can bypass each
other. When the second link in a dual-link configuration is
established, part of the first link's traffic will be steered over
to the new link. Although we do have a mechanism to ensure that
packets sent before and after the establishment of the new link
arrive in sequence to the destination node, this is not enough.
The arriving messages will still be delivered upwards in different
threads, something entailing a risk of message disordering during
the transition phase.

To fix this, we introduce a synchronization mechanism between the
two parallel links, so that traffic arriving on the new link cannot
be added to its input queue until we are guaranteed that all
pre-establishment messages have been delivered on the old, parallel
link.

This problem seems to always have been around, but its occurrence is
so rare that it has not been noticed until recent intensive testing.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the recent changes in message importance handling it becomes
possible to simplify handling of messages and sockets when we
encounter link congestion.

We merge the function tipc_link_cong() into link_schedule_user(),
and simplify the code of the latter. The code should now be
easier to follow, especially regarding return codes and handling
of the message that caused the situation.

In case the scheduling function is unable to pre-allocate a wakeup
message buffer, it now returns -ENOBUFS, which is a more correct
code than the previously used -EHOSTUNREACH.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we only use a single counter; the length of the backlog
queue, to determine whether a message should be accepted to the queue
or not. Each time a message is being sent, the queue length is compared
to a threshold value for the message's importance priority. If the queue
length is beyond this threshold, the message is rejected. This algorithm
implies a risk of starvation of low importance senders during very high
load, because it may take a long time before the backlog queue has
decreased enough to accept a lower level message.

We now eliminate this risk by introducing a counter for each importance
priority. When a message is sent, we check only the queue level for that
particular message's priority. If that is ok, the message can be added
to the backlog, irrespective of the queue level for other priorities.
This way, each level is guaranteed a certain portion of the total
bandwidth, and any risk of starvation is eliminated.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Master change notifications may occur other than when joining or
leaving a bridge, for example when being added to or removed from
a bond or Open vSwitch. In that case, do nothing instead of asking
the switch driver to remove a port from a bridge that it didn't join.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change type from unsigned long to int to fix an issue reported by kbuild robot:
crypto/algif_skcipher.c:596 skcipher_recvmsg_async() warn: unsigned 'used' is
never less than zero.
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a node joins a cluster while we are transmitting a fragment
stream over the broadcast link, it's missing the preceding fragments
needed to build a meaningful message. As a result, the node has to
drop it. However, as the fragment message is not acknowledged to
its sender before it's dropped, it accidentally causes link reset
of retransmission failure on the node.
Reported-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Tested-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The irqclass_sub_desc array and enum interruption_class are out of sync
thus /proc/interrupts is broken. Remove IRQIO_CLW.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the declaration for external variables to sctp.h file avoiding
to repeatedly declare them with extern keyword.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ss should display ipv4 mapped request sockets like this :

tcp    SYN-RECV   0      0  ::ffff:192.168.0.1:8080   ::ffff:192.0.2.1:35261

and not like this :

tcp    SYN-RECV   0      0  192.168.0.1:8080   192.0.2.1:35261

We should init ireq->ireq_family based on listener sk_family,
not the actual protocol carried by SYN packet.

This means we can set ireq_family in inet_reqsk_alloc()

Fixes: 3f66b083 ("inet: introduce ireq_family")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The original comment was not really informative or funny
as well as sexist. Replace it with a better explanation of
why the driver does stop and what the impacts are.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We now have K_VLANT, K_VLANP and K_VLANTPID. Clean them up into more
descriptive token, namely K_VLAN_TCI, K_VLAN_AVAIL and K_VLAN_TPID.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: listener refactor part 16

A CONFIG_PROVE_RCU=y build revealed an RCU splat I had to fix.

I added const qualifiers to various md5 methods, as I expect
to call them on behalf of request sock traffic even if
the listener socket is not locked. This seems ok, but adding
const makes the contract clearer. Note a good reduction
of code size thanks to request/establish sockets convergence.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With request socks convergence, we no longer need
different lookup methods. A request socket can
use generic lookup function.

Add const qualifier to 2nd tcp_v[46]_md5_lookup() parameter.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since request and established sockets now have same base,
there is no need to pass two pointers to tcp_v4_md5_hash_skb()
or tcp_v6_md5_hash_skb()

Also add a const qualifier to their struct tcp_md5sig_key argument.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is guaranteed that both tcp_v4_rcv() and tcp_v6_rcv()
run from rcu read locked sections :

ip_local_deliver_finish() and ip6_input_finish() both
use rcu_read_lock()

Also align tcp_v6_inbound_md5_hash() on tcp_v4_inbound_md5_hash()
by returning a boolean.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>