Since commit 297c5eee ("mm: make the vma list be doubly linked") made
it a doubly linked list, we don't need to scan the list when deleting
@vma.

And the original code didn't update the prev pointer. Fix it too.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I was reading nommu code, I found that it handles the vma list/tree
in an unusual way.  IIUC, because there can be more than one
identical/overrapped vmas in the list/tree, it sorts the tree more
strictly and does a linear search on the tree.  But it doesn't applied to
the list (i.e.  the list could be constructed in a different order than
the tree so that we can't use the list when finding the first vma in that
order).

Since inserting/sorting a vma in the tree and link is done at the same
time, we can easily construct both of them in the same order.  And linear
searching on the tree could be more costly than doing it on the list, it
can be converted to use the list.

Also, after the commit 297c5eee ("mm: make the vma list be doubly
linked") made the list be doubly linked, there were a couple of code need
to be fixed to construct the list properly.

Patch 1/6 is a preparation.  It maintains the list sorted same as the tree
and construct doubly-linked list properly.  Patch 2/6 is a simple
optimization for the vma deletion.  Patch 3/6 and 4/6 convert tree
traversal to list traversal and the rest are simple fixes and cleanups.

This patch:

@vma added into @mm should be sorted by start addr, end addr and VMA
struct addr in that order because we may get identical VMAs in the @mm.
However this was true only for the rbtree, not for the list.

This patch fixes this by remembering 'rb_prev' during the tree traversal
like find_vma_prepare() does and linking the @vma via __vma_link_list().
After this patch, we can iterate the whole VMAs in correct order simply by
using @mm->mmap list.

[akpm@linux-foundation.org: avoid duplicating __vma_link_list()]
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid merging a VMA with another VMA which is cloned from the parent process.

The cloned VMA shares the anon_vma lock with the parent process's VMA.  If
we do the merge, more vmas (even the new range is only for current
process) use the perent process's anon_vma lock.  This introduces
scalability issues.  find_mergeable_anon_vma() already considers this
case.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we only change vma->vm_end, we can avoid taking anon_vma lock even if
'insert' isn't NULL, which is the case of split_vma.

As I understand it, we need the lock before because rmap must get the
'insert' VMA when we adjust old VMA's vm_end (the 'insert' VMA is linked
to anon_vma list in __insert_vm_struct before).

But now this isn't true any more.  The 'insert' VMA is already linked to
anon_vma list in __split_vma(with anon_vma_clone()) instead of
__insert_vm_struct.  There is no race rmap can't get required VMAs.  So
the anon_vma lock is unnecessary, and this can reduce one locking in brk
case and improve scalability.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make some variables have correct alignment/section to avoid cache issue.
In a workload which heavily does mmap/munmap, the variables will be used
frequently.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Architectures that implement their own show_mem() function did not pass
the filter argument to show_free_areas() to appropriately avoid emitting
the state of nodes that are disallowed in the current context.  This patch
now passes the filter argument to show_free_areas() so those nodes are now
avoided.

This patch also removes the show_free_areas() wrapper around
__show_free_areas() and converts existing callers to pass an empty filter.

ia64 emits additional information for each node, so skip_free_areas_zone()
must be made global to filter disallowed nodes and it is converted to use
a nid argument rather than a zone for this use case.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <jejb@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is not useful: it provides page->virtual and is used with highmem.
xtensa has no support for highmem and those HIGHMEM bits which are found
by grep are partly implemented.  The interesting functions like kmap() are
missing.  If someone actually implements the complete HIGHMEM support he
could use HASHED_PAGE_VIRTUAL like most others do.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Chris Zankel <chris@zankel.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is not referenced by any Makefile.  pte_alloc_one_kernel() and
pte_alloc_one() is implemented in arch/xtensa/include/asm/pgalloc.h.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Chris Zankel <chris@zankel.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It should check if strict_strtoul() succeeds.

[akpm@linux-foundation.org: don't override strict_strtoul() return value]
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It has been reported on some laptops that kswapd is consuming large
amounts of CPU and not being scheduled when SLUB is enabled during large
amounts of file copying.  It is expected that this is due to kswapd
missing every cond_resched() point because;

shrink_page_list() calls cond_resched() if inactive pages were isolated
        which in turn may not happen if all_unreclaimable is set in
        shrink_zones(). If for whatver reason, all_unreclaimable is
        set on all zones, we can miss calling cond_resched().

balance_pgdat() only calls cond_resched if the zones are not
        balanced. For a high-order allocation that is balanced, it
        checks order-0 again. During that window, order-0 might have
        become unbalanced so it loops again for order-0 and returns
        that it was reclaiming for order-0 to kswapd(). It can then
        find that a caller has rewoken kswapd for a high-order and
        re-enters balance_pgdat() without ever calling cond_resched().

shrink_slab only calls cond_resched() if we are reclaiming slab
	pages. If there are a large number of direct reclaimers, the
	shrinker_rwsem can be contended and prevent kswapd calling
	cond_resched().

This patch modifies the shrink_slab() case.  If the semaphore is
contended, the caller will still check cond_resched().  After each
successful call into a shrinker, the check for cond_resched() remains in
case one shrinker is particularly slow.

[mgorman@suse.de: preserve call to cond_resched after each call into shrinker]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: NColin King <colin.king@canonical.com>
Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org>		[2.6.38+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are a few reports of people experiencing hangs when copying large
amounts of data with kswapd using a large amount of CPU which appear to be
due to recent reclaim changes.  SLUB using high orders is the trigger but
not the root cause as SLUB has been using high orders for a while.  The
root cause was bugs introduced into reclaim which are addressed by the
following two patches.

Patch 1 corrects logic introduced by commit 1741c877 ("mm: kswapd:
        keep kswapd awake for high-order allocations until a percentage of
        the node is balanced") to allow kswapd to go to sleep when
        balanced for high orders.

Patch 2 notes that it is possible for kswapd to miss every
        cond_resched() and updates shrink_slab() so it'll at least reach
        that scheduling point.

Chris Wood reports that these two patches in isolation are sufficient to
prevent the system hanging.  AFAIK, they should also resolve similar hangs
experienced by James Bottomley.

This patch:

Johannes Weiner poined out that the logic in commit 1741c877 ("mm: kswapd:
keep kswapd awake for high-order allocations until a percentage of the
node is balanced") is backwards.  Instead of allowing kswapd to go to
sleep when balancing for high order allocations, it keeps it kswapd
running uselessly.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: NColin King <colin.king@canonical.com>
Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>		[2.6.38+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 442b06bc ("slub: Remove node check in slab_free") added a
call to deactivate_slab() in the debug case in __slab_alloc(), which
unlocks the current slab used for allocation.  Going to the label
'unlock_out' then does it again.

Also, in the debug case we do not need all the other processing that the
'unlock_out' path does.  We always fall back to the slow path in the
debug case.  So the tid update is useless.

Similarly, ALLOC_SLOWPATH would just be incremented for all allocations.
Also a pretty useless thing.

So simply restore irq flags and return the object.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reported-and-bisected-by: NJames Morris <jmorris@namei.org>
Reported-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NJens Axboe <jaxboe@fusionio.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits)
  mach-ux500: set proper I2C platform data from MOP500s
  i2c-nomadik: break out single messsage transmission
  i2c-nomadik: reset the hw after status check
  i2c-nomadik: remove the unnecessary delay
  i2c-nomadik: change the TX and RX threshold
  i2c-nomadik: add code to retry on timeout failure
  i2c-nomadik: use pm_runtime API
  i2c-nomadik: print abort cause only on abort tag
  i2c-nomadik: correct adapter timeout initialization
  i2c-nomadik: remove the redundant error message
  i2c-nomadik: corrrect returned error numbers
  i2c-nomadik: fix speed enumerator
  i2c-nomadik: make i2c timeout specific per i2c bus
  i2c-nomadik: add regulator support
  i2c: i2c-sh_mobile bus speed platform data V2
  i2c: i2c-sh_mobile clock string removal
  i2c-eg20t: Support new device ML7223 IOH
  i2c: tegra: Add de-bounce cycles.
  i2c: tegra: fix repeated start handling
  i2c: tegra: recover from spurious interrupt storm
  ...

Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', 'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c

This specifies the new per-platform timeout per I2C bus and
switches the I2C buses to fast mode, and increase the FIFO
depth to 8 for reads and writes.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Reduce code size in the message transfer function by factoring out
a single-message transfer function.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

In case of I2C timeout, reset the HW only after the HW status
is read, otherwise the staus will be lost.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The delay in the driver seems to be not needed, so remove it.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NMarkus Grape <markus.grape@stericsson.com>
Tested-by: NPer Persson <per.xb.persson@stericsson.com>
Tested-by: NChethan Krishna N <chethan.krishna@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

1) Increase RX FIFO threshold so that there is a reduction in
the number of interrupts handled to complete a transaction.

2) Fill TX FIFO in the write function.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

It is seen that i2c-nomadik controller randomly stops generating the
interrupts leading to a i2c timeout. As a workaround to this problem,
add retries to the on going transfer on failure.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Use the pm_runtime API for pins control.
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com>
[deleted some surplus runtime PM code]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Modify the code to:
1)Print the cause of i2c failure only if the status is set to ABORT.
2)Print slave address on send/receive fail, will help in which slave
failed.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Correct the incorrect initialization of adapter timeout not to be
in milliseconds, as it needs to be done in jiffies.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The abort cause string itself is an error, so remove the redundant
explicit error message.
Signed-off-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The code was returning bad error numbers or just -1 in some cases.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The I2C speed enumerators in the i2c-nomadik header file were in
the wrong order.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add option to have different i2c timeout delay for different i2c buses
specified in platform data. Default to the old value unless specified.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This on-chip I2C controller needs to fetch the regulator
representing its voltage domain so that it won't be switched off.
Signed-off-by: NJonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-parport: Various cleanups
  i2c-i801: Don't depend on other kernel driver config options
  i2c-i801: Check for vendor Fujitsu before probing for apanel
  i2c-i801: Don't probe for slaves on IDF channels
  i2c-i801: SMBus patch for Intel Panther Point DeviceIDs
  i2c/writing-clients: Fix foo_driver.id_table

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  jbd: Fix comment to match the code in journal_start()
  jbd/jbd2: remove obsolete summarise_journal_usage.
  jbd: Fix forever sleeping process in do_get_write_access()
  ext2: fix error msg when mounting fs with too-large blocksize
  jbd: fix fsync() tid wraparound bug
  ext3: Fix fs corruption when make_indexed_dir() fails
  ext3: Fix lock inversion in ext3_symlink()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: make plock operation killable
  dlm: remove shared message stub for recovery
  dlm: delayed reply message warning
  dlm: Remove superfluous call to recalc_sigpending()

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (43 commits)
  TOMOYO: Fix wrong domainname validation.
  SELINUX: add /sys/fs/selinux mount point to put selinuxfs
  CRED: Fix load_flat_shared_library() to initialise bprm correctly
  SELinux: introduce path_has_perm
  flex_array: allow 0 length elements
  flex_arrays: allow zero length flex arrays
  flex_array: flex_array_prealloc takes a number of elements, not an end
  SELinux: pass last path component in may_create
  SELinux: put name based create rules in a hashtable
  SELinux: generic hashtab entry counter
  SELinux: calculate and print hashtab stats with a generic function
  SELinux: skip filename trans rules if ttype does not match parent dir
  SELinux: rename filename_compute_type argument to *type instead of *con
  SELinux: fix comment to state filename_compute_type takes an objname not a qstr
  SMACK: smack_file_lock can use the struct path
  LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH
  LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE
  SELINUX: Make selinux cache VFS RCU walks safe
  SECURITY: Move exec_permission RCU checks into security modules
  SELinux: security_read_policy should take a size_t not ssize_t
  ...

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o
  scripts/kallsyms.c: fix potential segfault
  scripts/gen_initramfs_list.sh: Convert to a /bin/sh script
  kbuild: Fix GNU make v3.80 compatibility
  kbuild: Fix passing -Wno-* options to gcc 4.4+
  kbuild: move scripts/basic/docproc.c to scripts/docproc.c
  kbuild: Fix Makefile.asm-generic for um
  kbuild: Allow to combine multiple W= levels
  kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0
  Fix handling of backlash character in LINUX_COMPILE_BY name
  kbuild: asm-generic support
  kbuild: implement several W= levels
  kbuild: Fix build with binutils <= 2.19
  initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries
  kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros
  kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros
  kbuild: Use the deterministic mode of ar
  kbuild: Call gzip with -n
  kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile
  Kconfig: improve KALLSYMS_ALL documentation

Fix up trivial conflict in Makefile

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: Make struct pcmcia_device_id const, sound drivers edition
  staging: pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Make declaration and uses of struct pcmcia_device_id const
  pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits)
  drivers/gpu/drm/radeon/atom.c: fix warning
  drm/radeon/kms: bump kms version number
  drm/radeon/kms: properly set num banks for fusion asics
  drm/radeon/kms/atom: move dig phy init out of modesetting
  drm/radeon/kms/cayman: fix typo in register mask
  drm/radeon/kms: fix typo in spread spectrum code
  drm/radeon/kms: fix tile_config value reported to userspace on cayman.
  drm/radeon/kms: fix incorrect comparison in cayman setup code.
  drm/radeon/kms: add wait idle ioctl for eg->cayman
  drm/radeon/cayman: setup hdp to invalidate and flush when asked
  drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked
  agp/uninorth: Fix lockups with radeon KMS and >1x.
  drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only
  drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
  drm/radeon/kms: fixup eDP connector handling
  drm/radeon/kms: bail early for eDP in hotplug callback
  drm/radeon/kms: simplify hotplug handler logic
  drm/radeon/kms: rewrite DP handling
  drm/radeon/kms/atom: add support for setting DP panel mode
  drm/radeon/kms: atombios.h updates for DP panel mode
  ...

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (29 commits)
  [S390] cpu hotplug: fix external interrupt subclass mask handling
  [S390] oprofile: dont access lowcore
  [S390] oprofile: add missing irq stats counter
  [S390] Ignore sendmmsg system call note wired up warning
  [S390] s390,oprofile: fix compile error for !CONFIG_SMP
  [S390] s390,oprofile: fix alert counter increment
  [S390] Remove unused includes in process.c
  [S390] get CPC image name
  [S390] sclp: event buffer dissection
  [S390] chsc: process channel-path-availability information
  [S390] refactor page table functions for better pgste support
  [S390] merge page_test_dirty and page_clear_dirty
  [S390] qdio: prevent compile warning
  [S390] sclp: remove unnecessary sendmask check
  [S390] convert old cpumask API into new one
  [S390] pfault: cleanup code
  [S390] pfault: cpu hotplug vs missing completion interrupts
  [S390] smp: add __noreturn attribute to cpu_die()
  [S390] percpu: implement arch specific irqsafe_cpu_ops
  [S390] vdso: disable gcov profiling
  ...

* Fix white space.
* Rename labels to something meaningful.
* Prefix defines with PORT_ to avoid collision with macros from
  <linux/parport.h>.
* Add const markers where possible.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander
  Input: tsc2007 - add X, Y and Z fuzz factors to platform data
  Input: tsc2007 - add poll_period parameter to platform data
  Input: tsc2007 - add poll_delay parameter to platform data
  Input: tsc2007 - add max_rt parameter to platform data
  Input: tsc2007 - debounce pressure measurement
  Input: ad714x - fix captouch wheel option algorithm
  Input: ad714x - allow platform code to specify irqflags
  Input: ad714x - fix threshold and completion interrupt masks
  Input: ad714x - fix up input configuration
  Input: elantech - remove support for proprietary X driver
  Input: elantech - report multitouch with proper ABS_MT messages
  Input: elantech - export pressure and width when supported
  Input: elantech - describe further the protocol
  Input: atmel_tsadcc - correct call to input_free_device
  Input: add driver FSL MPR121 capacitive touch sensor
  Input: remove useless synchronize_rcu() calls
  Input: ads7846 - fix gpio_pendown configuration
  Input: ads7846 - add possibility to use external vref on ads7846
  Input: rotary-encoder - add support for half-period encoders
  ...

Don't let other driver config options influence us, as it makes the
code more complex and fragile for a small benefit. There's nothing
wrong with instantiating I2C devices even if they don't have a driver.
And we're talking about 835 extra bytes in the binary on x86-64,
that's hardly worth arguing about.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: David Woodhouse <david.woodhouse@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>