To save time, the test does not just grab any option and test
it. The Kconfig files are examined to determine the dependencies
of the configs. If a config is chosen that depends on another
config, that config will be checked first. By checking the
parents first, we can eliminate whole groups of configs that
may have been enabled.

For example, if a USB device config is chosen and depends on
CONFIG_USB, the CONFIG_USB will be tested before the device.
If CONFIG_USB is found not to be needed, it, as well as all
configs that depend on it, will be disabled and removed from
the current min_config.

Note, the code from streamline_config (make localmodconfig)
was copied and used to find the dependencies in the Kconfig file.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After doing a make localyesconfig, your kernel configuration may
not be the most useful minimum configuration. Having a true minimum
config that you can use against other configs is very useful if
someone else has a config that breaks on your code. By only forcing
those configurations that are truly required to boot your machine
will give you less of a chance that one of your set configurations
will make the bug go away. This will give you a better chance to
be able to reproduce the reported bug matching the broken config.

Note, this does take some time, and may require you to run the
test over night, or perhaps over the weekend. But it also allows
you to interrupt it, and gives you the current minimum config
that was found till that time.

Note, this test automatically assumes a BUILD_TYPE of oldconfig
and its test type acts like boot.

TODO: add a test version that makes the config do more than just
      boot, like having network access.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There has been too many times that I put in one too many SKIP
TEST_STARTs and start the test with the default randconfig by accident
that I added this to have ktest ask the user for which test they want to
run if no TEST_START is specified.

Now if I accidently start the test with all TEST_STARTs skipped, ktest
asks what test do I want to run, and I now have a chance to kill it
before it does a make mrproper on my build directory.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Several places had the following code:

    get_grub_index;
    get_version;
    install;

    start_monitor;
    return monitor;

Creating a function "start_monitor_and_boot()" replaces these mulitple
uses with a single call.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Doing a patchcheck test, there may be warnings that gcc produces which
may be OK, and the test should not fail on that commit. By adding a
IGNORE_WARNINGS option to list a space delimited SHA1s that are ignored
lets the user avoid having the test fail on certain commits.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The tar command to create the module directory is cjf, but the
extraction only had xf. This works on most versions of tar, but some
versions of tar require xjf for extraction as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As multiple tests may be executed by the same server, have the test
machine name add uniqueness to the value of the temp directory.
Otherwise the temp directories may overwrite each other's tests.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are some cases that a patch may be needed to apply to the kernel
in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the
patch and POST_BUILD to remove it, allows for this to be done easily.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a config is set with CONFIG_MODULES=n, it does not mean that the
kernel does not need an initrd to boot. For systems that depend on LVM
and such, an initrd must run first.

If POST_INSTALL is defined, then run the post install regardless if
modules are needed or not.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The LOG_FILE variable needs to evaluate the $ options as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After a bug is found, the STOP_AFTER_FAILURE timeout is used to
determine how much output should be printed before breaking out
of the monitor loop. This is to get things like call traces and
enough infromation about the bug to help determine what caused it.

The STOP_AFTER_FAILURE is usually much shorter than the TIMEOUT
that is used to determine when to quit after no more stdio is given.

But since the stdio read uses a wait on I/O, the STOP_AFTER_FAILURE is
only checked after we get something from I/O. But if the I/O does
not return any more data, we wait the TIMEOUT period instead, even
though we already triggered a bug report.

The wait on I/O should honor the STOP_AFTER_FAILURE time if a bug has
been found.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Using the build KCONFIG_ALLCONFIG environment variable to force
the min config may not always work properly. Since ktest is
written in perl, it is trivial to read and replace the current
config with the configs specified by the min config.

Now the min config (and add configs) are read by perl and before
a make is done, these configs in the .config file are replaced
by the version in the min config.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Searching through several tests, it gets confusing which test result
is for which test. By adding the TEST_NAME option, the user can tell
which test result belongs to which test.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the config_bisect compares the min config with the
CONFIG_BISECT config. There may be another config that we know
is good that we want to ignore configs on. By passing in this
config it will ignore the options that are set in the good config.

Note: This only ignores the config, it does not (yet) handle
options that are different between the two configs. If the good
config has "SLAB" set and the bad config has "SLUB" it will not
find the bug if the bug had to do with changing these two options.

This is something that I intend to implement in the future.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a triple fault happens in a test, no call trace nor panic
is displayed. Instead, the system reboots to the good kernel.
Since the good kernel may display a boot prompt that matches the
success string, ktest may think that the test succeeded, when it
did not.

Detecting triple faults is tricky because it is hard to generalize
what a reboot looks like. The best that we can come up with for now
is to examine the Linux banner. If we detect that the Linux banner
matches the test we want to test, then look to see if we hit another
Linux banner with a different kernel is booted. This can be assumed
to be a triple fault.

We can't just check for two Linux banners because things like
early printk may cause the Linux banner to be displayed twice. Checking
for different kernel versions should be the safe bet.

If this for some reason detects a false triple boot. A new ktest
config option is also created:

 DETECT_TRIPLE_FAULT

This can be set to 0 to disable this checking.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Different timeouts can cause the ktest monitor to break out of the
loop. It becomes annoying that one does not know the reason why
it exited the monitor loop. Display the cause of the reason why
the loop was exited.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Al Viro observes that in the hugetlb case, handle_mm_fault() may return
a value of the kind ENOSPC when its caller is expecting a value of the
kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: usb - turn off de-emphasis in s/pdif for cm6206
  ALSA: asihpi: Use angle brackets for system includes
  ALSA: fm801: add error handling if auto-detect fails
  ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write
  ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd()
  ALSA: 6fire: Don't leak firmware in error path
  ASoC: Fix wm_hubs input PGA ZC bits
  ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (max6642): Better chip detection schema
  hwmon: (coretemp) Further relax temperature range checks
  hwmon: (coretemp) Fix TjMax detection for older CPUs
  hwmon: (coretemp) Relax target temperature range check
  hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault

* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  ARM: Tegra: Harmony: Fix conflicting GPIO numbering

Currently, both the WM8903 and TPS6586x chips attempt to register with
gpiolib using the same GPIO numbers. This causes the audio driver to
fail to initialize.

To solve this, add a define to board-harmony.h for the TPS6586x, and make
board-harmony-power.c use this define, instead of directly referencing
TEGRA_NR_GPIOS.

This fixes a regression introduced by commit
6f168f2f.
ARM: tegra: harmony: initialize the TPS65862 PMIC
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NColin Cross <ccross@android.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits)
  btrfs: fix uninitialized variable warning
  btrfs: add helper for fs_info->closing
  Btrfs: add mount -o inode_cache
  btrfs: scrub: add explicit plugging
  btrfs: use btrfs_ino to access inode number
  Btrfs: don't save the inode cache if we are deleting this root
  btrfs: false BUG_ON when degraded
  Btrfs: don't save the inode cache in non-FS roots
  Btrfs: make sure we don't overflow the free space cache crc page
  Btrfs: fix uninit variable in the delayed inode code
  btrfs: scrub: don't reuse bios and pages
  Btrfs: leave spinning on lookup and map the leaf
  Btrfs: check for duplicate entries in the free space cache
  Btrfs: don't try to allocate from a block group that doesn't have enough space
  Btrfs: don't always do readahead
  Btrfs: try not to sleep as much when doing slow caching
  Btrfs: kill BTRFS_I(inode)->block_group
  Btrfs: don't look at the extent buffer level 3 times in a row
  Btrfs: map the node block when looking for readahead targets
  Btrfs: set range_start to the right start in count_range_bits
  ...

Improve detection of MAX6642 by reading non existing registers (0x04, 0x06
and 0xff). Reading those registers returns the previously read value.
Signed-off-by: NPer Dalen <per.dalen@appeartv.com>
[guenter.roeck@ericsson.com: added second set of register reads]
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Fix oops caused by queue refcounting failure

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  tg3: Fix tg3_skb_error_unmap()
  net: tracepoint of net_dev_xmit sees freed skb and causes panic
  drivers/net/can/flexcan.c: add missing clk_put
  net: dm9000: Get the chip in a known good state before enabling interrupts
  drivers/net/davinci_emac.c: add missing clk_put
  af-packet: Add flag to distinguish VID 0 from no-vlan.
  caif: Fix race when conditionally taking rtnl lock
  usbnet/cdc_ncm: add missing .reset_resume hook
  vlan: fix typo in vlan_dev_hard_start_xmit()
  net/ipv4: Check for mistakenly passed in non-IPv4 address
  iwl4965: correctly validate temperature value
  bluetooth l2cap: fix locking in l2cap_global_chan_by_psm
  ath9k: fix two more bugs in tx power
  cfg80211: don't drop p2p probe responses
  Revert "net: fix section mismatches"
  drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  sctp: stop pending timers and purge queues when peer restart asoc
  drivers/net: ks8842 Fix crash on received packet when in PIO mode.
  ip_options_compile: properly handle unaligned pointer
  iwlagn: fix incorrect PCI subsystem id for 6150 devices
  ...

With Linus' tree, today's linux-next build (powercp ppc64_defconfig)
produced this warning:

fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode':
fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used
uninitialized in this function

Introduced by commit 16cdcec7 ("btrfs: implement delayed inode items
operation").

This fixes a bug in btrfs_update_inode(): if the returned value from
btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not
updated and several call paths may hit a BUG_ON or fail with strange
code.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

wrap checking of filesystem 'closing' flag and fix a few missing memory
barriers.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

This makes the inode map cache default to off until we
fix the overflow problem when the free space crcs don't fit
inside a single page.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

With the removal of the implicit plugging scrub ends up doing more and
smaller I/O than necessary. This patch adds explicit plugging per chunk.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

commit 4cb5300b ("Btrfs: add mount -o auto_defrag") accesses inode
number directly while it should use the helper with the new inode
number allocator.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

With xfstest 254 I can panic the box every time with the inode number caching
stuff on.  This is because we clean the inodes out when we delete the subvolume,
but then we write out the inode cache which adds an inode to the subvolume inode
tree, and then when it gets evicted again the root gets added back on the dead
roots list and is deleted again, so we have a double free.  To stop this from
happening just return 0 if refs is 0 (and we're not the tree root since tree
root always has refs of 0).  With this fix 254 no longer panics.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Tested-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In degraded mode the struct btrfs_device of missing devs don't have
device->name set. A kstrdup of NULL correctly returns NULL. Don't
BUG in this case.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This adds extra checks to make sure the inode map we are caching really
belongs to a FS root instead of a special relocation tree.  It
prevents crashes during balancing operations.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The free space cache uses only one page for crcs right now,
which means we can't have a cache file bigger than the
crcs we can fit in the first page.  This adds a check to
enforce that restriction.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The nitems counter needs to start at zero
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The current scrub implementation reuses bios and pages as often as possible,
allocating them only on start and releasing them when finished. This leads
to more problems with the block layer than it's worth. The elevator gets
confused when there are more pages added to the bio than bi_size suggests.
This patch completely rips out the reuse of bios and pages and allocates
them freshly for each submit.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Maosn <chris.mason@oracle.com>

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Use hlist_entry() for io_context.cic_list.first
  cfq-iosched: Remove bogus check in queue_fail path
  xen/blkback: potential null dereference in error handling
  xen/blkback: don't call vbd_size() if bd_disk is NULL
  block: blkdev_get() should access ->bd_disk only after success
  CFQ: Fix typo and remove unnecessary semicolon
  block: remove unwanted semicolons
  Revert "block: Remove extra discard_alignment from hd_struct."
  nbd: adjust 'max_part' according to part_shift
  nbd: limit module parameters to a sane value
  nbd: pass MSG_* flags to kernel_recvmsg()
  block: improve the bio_add_page() and bio_add_pc_page() descriptions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: strncpy: fix handling of zero lengths