Implement the port_pvid_get and vlan_getnext driver functions required
to dump VLAN entries from the hardware, with the VTU Get Next operation.

Some functions and structure will be shared with STU operations, since
their table format are similar (e.g. STU data entries are accessible
with the same registers as VTU entries, except with an offset of 2).
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the VTU Flush operation (which also flushes the STU), so that
warm boots won't preserved old entries.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new functions in DSA drivers to access hardware VLAN entries through
SWITCHDEV_OBJ_PORT_VLAN objects:

 - port_pvid_get() and vlan_getnext() to dump a VLAN
 - port_vlan_del() to exclude a port from a VLAN
 - port_pvid_set() and port_vlan_add() to join a port to a VLAN

The DSA infrastructure will ensure that each VLAN of the given range
does not already belong to another bridge. If it does, it will fallback
to software VLAN and won't program the hardware.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like the ipv4 patch with a similar title, this adds a sysctl to allow
the user to change routing behavior based on whether or not the
interface associated with the nexthop was an up or down link.  The
default setting preserves the current behavior, but anyone that enables
it will notice that nexthops on down interfaces will no longer be
selected:

net.ipv6.conf.all.ignore_routes_with_linkdown = 0
net.ipv6.conf.default.ignore_routes_with_linkdown = 0
net.ipv6.conf.lo.ignore_routes_with_linkdown = 0
...

When the above sysctls are set, not only will link status be reported to
userspace, but an indication that a nexthop is dead and will not be used
is also reported.

1000::/8 via 7000::2 dev p7p1  metric 1024 dead linkdown  pref medium
1000::/8 via 8000::2 dev p8p1  metric 1024  pref medium
7000::/8 dev p7p1  proto kernel  metric 256 dead linkdown  pref medium
8000::/8 dev p8p1  proto kernel  metric 256  pref medium
9000::/8 via 8000::2 dev p8p1  metric 2048  pref medium
9000::/8 via 7000::2 dev p7p1  metric 1024 dead linkdown  pref medium
fe80::/64 dev p7p1  proto kernel  metric 256 dead linkdown  pref medium
fe80::/64 dev p8p1  proto kernel  metric 256  pref medium

This also adds devconf support and notification when sysctl values
change.

v2: drop use of rt6i_nhflags since it is not needed right now
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to track current link status of ipv6 nexthops to match
recent changes that added support for ipv4 nexthops.  This takes a
simple approach to track linkdown status for next-hops and simply
checks the dev for the dst entry and sets proper flags that to be used
in the netlink message.

v2: drop use of rt6i_nhflags since it is not needed right now
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Handle TRACE_PKT, stack can sniff them on the first port
Add debubfs enrty to configure tracing for offload traffic like iWARP
& iSCSI for debugging purpose.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HWM_REVERSE() macro is unused, remove it.
Signed-off-by: Nyalin wang <yalin.wang2010@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rocker driver tracks arp_tbl neighs to resolve IPv4 route nexthops.  The
driver uses NETEVENT_NEIGH_UPDATE for neigh adds and updates, but there is
no event when the neigh is removed from the device (such as when the device
goes admin down).  This patches hooks ndo_neigh_destroy so the driver can
know when a neigh is removed from the device.  In response, the driver will
purge the neigh entry from its internal tbl.

I didn't find an in-tree users of ndo_neigh_destroy, so I'm not sure if
this ndo is vestigial or if there are out-of-tree users.  In any case, it
does what I need here.  An alternative design would be to generate
NETEVENT_NEIGH_UPDATE event when neigh is being destroyed, setting state to
NUD_NONE so driver knows neigh entry is dead.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On sucessful probe, driver prints the switch ID.  This patch changes the
format of the printed ID to match what's used in sysfs phys_switch_id node.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeremy Linton says:

====================
Enable smsc911x for use with ACPI

This set of patches enables the front Ethernet port on the
ARM Juno development platform when used with an ACPI enabled kernel.

These patches covert the of_property* calls in the driver to the
DT/ACPI agnostic device_property* calls, and add the arm hardware
id to the acpi_match_table.

To support the above changes I copied a couple routines from
of_net into the properties.c file, and modified them to
be ACPI/DT agnostic. I'm not 100% sure this is the correct location
for these functions. But I think they are required to avoid having
a dozen different implementations scattered across assorted Ethernet
adapters that are being enabled to use ACPI properties.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ACPI bindings for the smsc911x driver. Convert the DT specific calls
to nonspecific device* calls, This allows the driver to work
with both ACPI and DT configurations. Ethernet should now work when using
ACPI on ARM Juno.
Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Reviewed-by: NGraeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OF has some helper functions for parsing MAC and PHY settings.
In cases where the platform is providing this information rather
than the device itself, there needs to be similar functions for ACPI.

These functions are slightly modified versions of the ones in
of_net which can use information provided via DT or ACPI.
Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuchung Cheng says:

====================
minor tail loss probe improvements

This patch series enhance the tail loss probe (TLP) on some error
conditions. When TLP fails to send a probe, it will no longer
extend the RTO. When it fails to send a new packet because of
receiver window limit, it'll try to retransmit the last packet.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When TLP fails to send new packet because of receive window
limit, it should fall back to retransmit the last packet instead.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NNandita Dukkipati <nanditad@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If TLP was unable to send a probe, it extended the RTO to
now + icsk_rto. But extending the RTO makes little sense
if no TLP probe went out. With this commit, instead of
extending the RTO we re-arm it relative to the transmit time
of the write queue head.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NNandita Dukkipati <nanditad@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mugunthan V N says:

====================
Add AM335x PG1.0 CPSW errata workaround

With commit 870915fe ("drivers: net: cpsw: remove
disable_irq/enable_irq as irq can be masked from cpsw itself"),
CPSW on AM335x beagle bone white is broken as there is a errata
for AM335x PG1.0. This patch series implements the workaround by
disabling the interrupts from ARM IRQ controller for AM335x SoC
in addition to the masking of interrupts in CPSW.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CPSW driver has been updated with compatibles for enabling errata
workarounds. So updating cpsw compatibles.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CPSW driver has been updated with compatibles for enabling errata
workarounds. So updating cpsw compatibles.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As per Am335x Errata [1] Advisory 1.0.9, The CPSW C0_TX_PEND and
C0_RX_PEND interrupt outputs provide a single transmit interrupt
that combines transmit channel interrupts TXPEND[7:0] and a
single receive interrupt that combines receive channel interrupts
RXPEND[7:0]. The TXPEND[0] and RXPEND[0] interrupt outputs are
connected to the ARM Cortex-A8 interrupt controller (INTC) rather
than the C0_TX_PEND and C0_RX_PEND interrupt outputs. So even
though CPSW interrupt is cleared by writing appropriate values to
EOI register the interrupt is not cleared in IRQ controller. So
interrupt is still pending and CPU is struck in ISR, the
workaround is to disable the interrupts in ARM irq controller.

[1] http://www.ti.com/lit/er/sprz360f/sprz360f.pdfSigned-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/cavium/Kconfig

The cavium conflict was overlapping dependency
changes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull device mapper fixes from Mike Snitzer:

 - two stable fixes for corruption seen in a snapshot of thinp metadata;
   metadata snapshots aren't widely used but help provide a consistent
   view of the metadata associated with an active thin-pool.

 - a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq"

* tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache policy smq: move 'dm-cache-default' module alias to SMQ
  dm btree: add ref counting ops for the leaves of top level btrees
  dm thin metadata: delete btrees when releasing metadata snapshot

Pull xen block driver fixes from Jens Axboe:
 "A few small bug fixes for xen-blk{front,back} that have been sitting
  over my vacation"

* 'for-linus' of git://git.kernel.dk/linux-block:
  xen-blkback: replace work_pending with work_busy in purge_persistent_gnt()
  xen-blkfront: don't add indirect pages to list when !feature_persistent
  xen-blkfront: introduce blkfront_gather_backend_features()

Pull xen bug fixes from David Vrabel:

 - revert a fix from 4.2-rc5 that was causing lots of WARNING spam.

 - fix a memory leak affecting backends in HVM guests.

 - fix PV domU hang with certain configurations.

* tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
  Revert "xen/events/fifo: Handle linked events when closing a port"
  x86/xen: build "Xen PV" APIC driver for domU as well

This reverts commits 9a036b93 ("x86/signal/64: Remove 'fs' and 'gs'
from sigcontext") and c6f20629 ("x86/signal/64: Fix SS handling for
signals delivered to 64-bit programs").

They were cleanups, but they break dosemu by changing the signal return
behavior (and removing 'fs' and 'gs' from the sigcontext struct - while
not actually changing any behavior - causes build problems).
Reported-and-tested-by: NStas Sergeev <stsp@list.ru>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi
    devices, from Emmanuel Grumbach.

 2) Falling back to vmalloc in conntrack should not emit a warning, from
    Pablo Neira Ayuso.

 3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis
    Felipe Dominguez Vega.

 4) Rocker doesn't free netdev on device removal, from Ido Schimmel.

 5) UDP multicast early sock demux has route handling races, from Eric
    Dumazet.

 6) Fix L4 checksum handling in openvswitch, from Glenn Griffin.

 7) Fix use-after-free in skb_set_peeked, from Herbert Xu.

 8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead
    to fraglists longer than the driver can support.  From Jason Wang.

 9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto.

10) Fix interrupt storm in bna driver, from Ivan Vecera.

11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann.

12) Fix inet request sock leak, from Eric Dumazet.

13) Fix TX interrupt masking and marking in TX descriptors of fs_enet
    driver, from LEROY Christophe.

14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely
    to get fixed any time soon.  From Jakub Kicinski

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  cosa: missing error code on failure in probe()
  gianfar: remove faulty filer optimizer
  gianfar: correct list membership accounting
  gianfar: correct filer table writing
  bonding: Gratuitous ARP gets dropped when first slave added
  net: dsa: Do not override PHY interface if already configured
  net: fs_enet: mask interrupts for TX partial frames.
  net: fs_enet: explicitly remove I flag on TX partial frames
  inet: fix possible request socket leak
  inet: fix races with reqsk timers
  mkiss: Fix error handling in mkiss_open()
  bnx2x: Free NVRAM lock at end of each page
  bnx2x: Prevent null pointer dereference on SKB release
  cxgb4: missing curly braces in t4_setup_debugfs()
  net-timestamp: Update skb_complete_tx_timestamp comment
  ipv6: don't reject link-local nexthop on other interface
  netlink: make sure -EBUSY won't escape from netlink_insert
  bna: fix interrupts storm caused by erroneous packets
  net: mvpp2: replace TX coalescing interrupts with hrtimer
  net: mvpp2: enable proper per-CPU TX buffers unmapping
  ...

Pull EDAC fix from Borislav Petkov:
 "A ppc4xx_edac fix for accessing ->csrows properly.  This driver was
  missed during the conversion a couple of years ago"

* tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ppc4xx: Access mci->csrows array elements properly

The commit

  de3910eb ("edac: change the mem allocation scheme to
		 make Documentation/kobject.txt happy")

changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.
Signed-off-by: NMichael Walle <michael@walle.cc>
Cc: <stable@vger.kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by: NBorislav Petkov <bp@suse.de>

If register_hdlc_device() fails, the current code returns 0 but we
should return an error code instead.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few things have changed since the previous version of the vxlan
documentation was written, so update it and correct some grammar and
such while we are at it.
Signed-off-by: NRick Jones <rick.jones2@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to use the IS_ERR_VALUE() macro for checking
the return value from pm_runtime_* functions.

Just do a simple negative test instead.

The semantic patch that makes this change is available
in scripts/coccinelle/api/pm_runtime.cocci.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Verifier rejects programs incorrectly.

Fixes: 35578d79 ("bpf: Implement function bpf_perf_event_read()")
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NWei-Chun Chao <weichunc@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Add some more debug info

This patch series adds the following.
Add more info for sge_qinfo dump
Differentiate tid and stids between different regions, and add a debugfs
entry to dump all the tid info

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add debugfs support to dump tid info like stid, sftid, tids, atid and
hwtids
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For T4 adapter, offloaded servers tid for IPv4 connections are
allocated from filter region. So add a new field for server filter tid if
server tid is allocated from filter region.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the tid info, differentiate from which region the TID is allocated
from. It can be from TCAM region or HASH region.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding more details to sge qinfo for debugging purpose.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a system has multiple ethernet devices and during DHCP
request (for using NFS), the system waits only for HZ/2 which is
500mS before switching to another interface for DHCP.

There are some routers (Ex: Trendnet routers) which responds to
DHCP request at about 560mS. When the system has only one
ethernet interface there is no issue as the timeout is 2S and the
dev xid doesn't changes and only retries.

But when the system has multiple Ethernet like DRA74x with CPSW
in dual EMAC mode, the DHCP response is dropped as the dev xid
changes while shifting to the next device. So changing inter
device timeout to HZ (which is 1S).
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two improvements in this patch:
 1. Fix the build warnings;
 2. Add function read_trace_pipe() to print the result on
    the screen;

Before this patch, we can get the result through /sys/kernel/de
bug/tracing/trace_pipe and get nothing on the screen.
By applying this patch, the result can be printed on the screen.
  $ ./tracex6
	...
         tracex6-705   [003] d..1   131.428593: : CPU-3   19981414
            sshd-683   [000] d..1   131.428727: : CPU-0   221682321
            sshd-683   [000] d..1   131.428821: : CPU-0   221808766
            sshd-683   [000] d..1   131.428950: : CPU-0   221982984
            sshd-683   [000] d..1   131.429045: : CPU-0   222111851
         tracex6-705   [003] d..1   131.429168: : CPU-3   20757551
            sshd-683   [000] d..1   131.429170: : CPU-0   222281240
            sshd-683   [000] d..1   131.429261: : CPU-0   222403340
            sshd-683   [000] d..1   131.429378: : CPU-0   222561024
	...
Signed-off-by: NKaixu Xia <xiakaixu@huawei.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This BQL implementation is mostly derived from its related driver, alx.
Tested on AR8131 (rev c0) [1969:1063]. Saturated a 100mbps link with 5
concurrent runs of netperf. Ping latency dropped from 14ms to 3ms.
Signed-off-by: NRon Angeles <ronangeles@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
gianfar: filer changes

respinning with examples as requested.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>