Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 10月, 2018 1 次提交
  3. 21 9月, 2018 1 次提交
    • R
      mm: slowly shrink slabs with a relatively small number of objects · 172b06c3
      由 Roman Gushchin 提交于 
      9092c71b ("mm: use sc->priority for slab shrink targets") changed the
way that the target slab pressure is calculated and made it
priority-based:

    delta = freeable >> priority;
    delta *= 4;
    do_div(delta, shrinker->seeks);

The problem is that on a default priority (which is 12) no pressure is
applied at all, if the number of potentially reclaimable objects is less
than 4096 (1<<12).

This causes the last objects on slab caches of no longer used cgroups to
(almost) never get reclaimed.  It's obviously a waste of memory.

It can be especially painful, if these stale objects are holding a
reference to a dying cgroup.  Slab LRU lists are reparented on memcg
offlining, but corresponding objects are still holding a reference to the
dying cgroup.  If we don't scan these objects, the dying cgroup can't go
away.  Most likely, the parent cgroup hasn't any directly charged objects,
only remaining objects from dying children cgroups.  So it can easily hold
a reference to hundreds of dying cgroups.

If there are no big spikes in memory pressure, and new memory cgroups are
created and destroyed periodically, this causes the number of dying
cgroups grow steadily, causing a slow-ish and hard-to-detect memory
"leak".  It's not a real leak, as the memory can be eventually reclaimed,
but it could not happen in a real life at all.  I've seen hosts with a
steadily climbing number of dying cgroups, which doesn't show any signs of
a decline in months, despite the host is loaded with a production
workload.

It is an obvious waste of memory, and to prevent it, let's apply a minimal
pressure even on small shrinker lists.  E.g.  if there are freeable
objects, let's scan at least min(freeable, scan_batch) objects.

This fix significantly improves a chance of a dying cgroup to be
reclaimed, and together with some previous patches stops the steady growth
of the dying cgroups number on some of our hosts.

Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com
Fixes: 9092c71b ("mm: use sc->priority for slab shrink targets")
Signed-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NRik van Riel <riel@surriel.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      172b06c3
  5. 23 8月, 2018 2 次提交
  7. 18 8月, 2018 9 次提交
    • K
      mm: use special value SHRINKER_REGISTERING instead of list_empty() check · 7e010df5
      由 Kirill Tkhai 提交于 
      The patch introduces a special value SHRINKER_REGISTERING to use instead
of list_empty() to differ a registering shrinker from unregistered
shrinker.  Why we need that at all?

Shrinker registration is split in two parts.  The first one is
prealloc_shrinker(), which allocates shrinker memory and reserves ID in
shrinker_idr.  This function can fail.  The second is
register_shrinker_prepared(), and it finalizes the registration.  This
function actually makes shrinker available to be used from
shrink_slab(), and it can't fail.

One shrinker may be based on more then one LRU lists.  So, we never
clear the bit in memcg shrinker maps, when (one of) corresponding LRU
list becomes empty, since other LRU lists may be not empty.  See
superblock shrinker for example: it is based on two LRU lists:
s_inode_lru and s_dentry_lru.  We do not want to clear shrinker bit,
when there are no inodes in s_inode_lru, as s_dentry_lru may contain
dentries.

Instead of that, we use special algorithm to detect shrinkers having no
elements at all its LRU lists, and this is made in shrink_slab_memcg().
See the comment in this function for the details.

Also, in shrink_slab_memcg() we clear shrinker bit in the map, when we
meet unregistered shrinker (bit is set, while there is no a shrinker in
IDR).  Otherwise, we would have done that at the moment of shrinker
unregistration for all memcgs (and this looks worse, since iteration
over all memcg may take much time).  Also this would have imposed
restrictions on shrinker unregistration order for its users: they would
have had to guarantee, there are no new elements after
unregister_shrinker() (otherwise, a new added element would have set a
bit).

So, if we meet a set bit in map and no shrinker in IDR when we're
iterating over the map in shrink_slab_memcg(), this means the
corresponding shrinker is unregistered, and we must clear the bit.

Another case is shrinker registration.  We want two things there:

1) do_shrink_slab() can be called only for completely registered
   shrinkers;

2) shrinker internal lists may be populated in any order with
   register_shrinker_prepared() (let's talk on the example with sb).  Both
   of:

  a)list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru); [cpu0]
    memcg_set_shrinker_bit();                               [cpu0]
    ...
    register_shrinker_prepared();                           [cpu1]

  and

  b)register_shrinker_prepared();                           [cpu0]
    ...
    list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru); [cpu1]
    memcg_set_shrinker_bit();                               [cpu1]

   are legitimate.  We don't want to impose restriction here and to
   force people to use only (b) variant.  We don't want to force people to
   care, there is no elements in LRU lists before the shrinker is
   completely registered.  Internal users of LRU lists and shrinker code
   are two different subsystems, and they have to be closed in themselves
   each other.

In (a) case we have the bit set before shrinker is completely
registered.  We don't want do_shrink_slab() is called at this moment, so
we have to detect such the registering shrinkers.

Before this patch list_empty() (shrinker is not linked to the list)
check was used for that.  So, in (a) there could be a bit set, but we
don't call do_shrink_slab() unless shrinker is linked to the list.  It's
just an indicator, I just overloaded linking to the list.

This was not the best solution, since it's better not to touch the
shrinker memory from shrink_slab_memcg() before it's completely
registered (this also will be useful in the future to make shrink_slab()
completely lockless).

So, this patch introduces better way to detect registering shrinker,
which allows not to dereference shrinker memory.  It's just a ~0UL
value, which we insert into the IDR during ID allocation.  After
shrinker is ready to be used, we insert actual shrinker pointer in the
IDR, and it becomes available to shrink_slab_memcg().

We can't use NULL instead of this new value for this purpose as:
shrink_slab_memcg() already uses NULL to detect unregistered shrinkers,
and we don't want the function sees NULL and clears the bit, otherwise
(a) won't work.

This is the only thing the patch makes: the better way to detect
registering shrinker.  Nothing else this patch makes.

Also this gives a better assembler, but it's minor side of the patch:

Before:
  callq  <idr_find>
  mov    %rax,%r15
  test   %rax,%rax
  je     <shrink_slab_memcg+0x1d5>
  mov    0x20(%rax),%rax
  lea    0x20(%r15),%rdx
  cmp    %rax,%rdx
  je     <shrink_slab_memcg+0xbd>
  mov    0x8(%rsp),%edx
  mov    %r15,%rsi
  lea    0x10(%rsp),%rdi
  callq  <do_shrink_slab>

After:
  callq  <idr_find>
  mov    %rax,%r15
  lea    -0x1(%rax),%rax
  cmp    $0xfffffffffffffffd,%rax
  ja     <shrink_slab_memcg+0x1cd>
  mov    0x8(%rsp),%edx
  mov    %r15,%rsi
  lea    0x10(%rsp),%rdi
  callq  ffffffff810cefd0 <do_shrink_slab>

[ktkhai@virtuozzo.com: add #ifdef CONFIG_MEMCG_KMEM around idr_replace()]
  Link: http://lkml.kernel.org/r/758b8fec-7573-47eb-b26a-7b2847ae7b8c@virtuozzo.com
Link: http://lkml.kernel.org/r/153355467546.11522.4518015068123480218.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7e010df5
    • K
      mm/vmscan.c: move check for SHRINKER_NUMA_AWARE to do_shrink_slab() · ac7fb3ad
      由 Kirill Tkhai 提交于 
      In case of shrink_slab_memcg() we do not zero nid, when shrinker is not
numa-aware.  This is not a real problem, since currently all memcg-aware
shrinkers are numa-aware too (we have two: super_block shrinker and
workingset shrinker), but something may change in the future.

Link: http://lkml.kernel.org/r/153320759911.18959.8842396230157677671.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ac7fb3ad
    • K
      mm/vmscan.c: clear shrinker bit if there are no objects related to memcg · f90280d6
      由 Kirill Tkhai 提交于 
      To avoid further unneed calls of do_shrink_slab() for shrinkers, which
already do not have any charged objects in a memcg, their bits have to
be cleared.

This patch introduces a lockless mechanism to do that without races
without parallel list lru add.  After do_shrink_slab() returns
SHRINK_EMPTY the first time, we clear the bit and call it once again.
Then we restore the bit, if the new return value is different.

Note, that single smp_mb__after_atomic() in shrink_slab_memcg() covers
two situations:

1)list_lru_add()     shrink_slab_memcg
    list_add_tail()    for_each_set_bit() <--- read bit
                         do_shrink_slab() <--- missed list update (no barrier)
    <MB>                 <MB>
    set_bit()            do_shrink_slab() <--- seen list update

This situation, when the first do_shrink_slab() sees set bit, but it
doesn't see list update (i.e., race with the first element queueing), is
rare.  So we don't add <MB> before the first call of do_shrink_slab()
instead of this to do not slow down generic case.  Also, it's need the
second call as seen in below in (2).

2)list_lru_add()      shrink_slab_memcg()
    list_add_tail()     ...
    set_bit()           ...
  ...                   for_each_set_bit()
  do_shrink_slab()        do_shrink_slab()
    clear_bit()           ...
  ...                     ...
  list_lru_add()          ...
    list_add_tail()       clear_bit()
    <MB>                  <MB>
    set_bit()             do_shrink_slab()

The barriers guarantee that the second do_shrink_slab() in the right
side task sees list update if really cleared the bit.  This case is
drawn in the code comment.

[Results/performance of the patchset]

After the whole patchset applied the below test shows signify increase
of performance:

  $echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
  $mkdir /sys/fs/cgroup/memory/ct
  $echo 4000M > /sys/fs/cgroup/memory/ct/memory.kmem.limit_in_bytes
      $for i in `seq 0 4000`; do mkdir /sys/fs/cgroup/memory/ct/$i;
			    echo $$ > /sys/fs/cgroup/memory/ct/$i/cgroup.procs;
			    mkdir -p s/$i; mount -t tmpfs $i s/$i;
			    touch s/$i/file; done

Then, 5 sequential calls of drop caches:

  $time echo 3 > /proc/sys/vm/drop_caches

1)Before:
  0.00user 13.78system 0:13.78elapsed 99%CPU
  0.00user 5.59system 0:05.60elapsed 99%CPU
  0.00user 5.48system 0:05.48elapsed 99%CPU
  0.00user 8.35system 0:08.35elapsed 99%CPU
  0.00user 8.34system 0:08.35elapsed 99%CPU

2)After
  0.00user 1.10system 0:01.10elapsed 99%CPU
  0.00user 0.00system 0:00.01elapsed 64%CPU
  0.00user 0.01system 0:00.01elapsed 82%CPU
  0.00user 0.00system 0:00.01elapsed 64%CPU
  0.00user 0.01system 0:00.01elapsed 82%CPU

The results show the performance increases at least in 548 times.

Shakeel Butt tested this patchset with fork-bomb on his configuration:

 > I created 255 memcgs, 255 ext4 mounts and made each memcg create a
 > file containing few KiBs on corresponding mount. Then in a separate
 > memcg of 200 MiB limit ran a fork-bomb.
 >
 > I ran the "perf record -ag -- sleep 60" and below are the results:
 >
 > Without the patch series:
 > Samples: 4M of event 'cycles', Event count (approx.): 3279403076005
 > +  36.40%            fb.sh  [kernel.kallsyms]    [k] shrink_slab
 > +  18.97%            fb.sh  [kernel.kallsyms]    [k] list_lru_count_one
 > +   6.75%            fb.sh  [kernel.kallsyms]    [k] super_cache_count
 > +   0.49%            fb.sh  [kernel.kallsyms]    [k] down_read_trylock
 > +   0.44%            fb.sh  [kernel.kallsyms]    [k] mem_cgroup_iter
 > +   0.27%            fb.sh  [kernel.kallsyms]    [k] up_read
 > +   0.21%            fb.sh  [kernel.kallsyms]    [k] osq_lock
 > +   0.13%            fb.sh  [kernel.kallsyms]    [k] shmem_unused_huge_count
 > +   0.08%            fb.sh  [kernel.kallsyms]    [k] shrink_node_memcg
 > +   0.08%            fb.sh  [kernel.kallsyms]    [k] shrink_node
 >
 > With the patch series:
 > Samples: 4M of event 'cycles', Event count (approx.): 2756866824946
 > +  47.49%            fb.sh  [kernel.kallsyms]    [k] down_read_trylock
 > +  30.72%            fb.sh  [kernel.kallsyms]    [k] up_read
 > +   9.51%            fb.sh  [kernel.kallsyms]    [k] mem_cgroup_iter
 > +   1.69%            fb.sh  [kernel.kallsyms]    [k] shrink_node_memcg
 > +   1.35%            fb.sh  [kernel.kallsyms]    [k] mem_cgroup_protected
 > +   1.05%            fb.sh  [kernel.kallsyms]    [k] queued_spin_lock_slowpath
 > +   0.85%            fb.sh  [kernel.kallsyms]    [k] _raw_spin_lock
 > +   0.78%            fb.sh  [kernel.kallsyms]    [k] lruvec_lru_size
 > +   0.57%            fb.sh  [kernel.kallsyms]    [k] shrink_node
 > +   0.54%            fb.sh  [kernel.kallsyms]    [k] queue_work_on
 > +   0.46%            fb.sh  [kernel.kallsyms]    [k] shrink_slab_memcg

[ktkhai@virtuozzo.com: v9]
  Link: http://lkml.kernel.org/r/153112561772.4097.11011071937553113003.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063070859.1818.11870882950920963480.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f90280d6
    • K
      mm: add SHRINK_EMPTY shrinker methods return value · 9b996468
      由 Kirill Tkhai 提交于 
      We need to distinguish the situations when shrinker has very small
amount of objects (see vfs_pressure_ratio() called from
super_cache_count()), and when it has no objects at all.  Currently, in
the both of these cases, shrinker::count_objects() returns 0.

The patch introduces new SHRINK_EMPTY return value, which will be used
for "no objects at all" case.  It's is a refactoring mostly, as
SHRINK_EMPTY is replaced by 0 by all callers of do_shrink_slab() in this
patch, and all the magic will happen in further.

Link: http://lkml.kernel.org/r/153063069574.1818.11037751256699341813.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9b996468
    • V
      mm/vmscan.c: generalize shrink_slab() calls in shrink_node() · aeed1d32
      由 Vladimir Davydov 提交于 
      The patch makes shrink_slab() be called for root_mem_cgroup in the same
way as it's called for the rest of cgroups.  This simplifies the logic
and improves the readability.

[ktkhai@virtuozzo.com: wrote changelog]
Link: http://lkml.kernel.org/r/153063068338.1818.11496084754797453962.stgit@localhost.localdomainSigned-off-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      aeed1d32
    • K
      mm/vmscan.c: iterate only over charged shrinkers during memcg shrink_slab() · b0dedc49
      由 Kirill Tkhai 提交于 
      Using the preparations made in previous patches, in case of memcg
shrink, we may avoid shrinkers, which are not set in memcg's shrinkers
bitmap.  To do that, we separate iterations over memcg-aware and
!memcg-aware shrinkers, and memcg-aware shrinkers are chosen via
for_each_set_bit() from the bitmap.  In case of big nodes, having many
isolated environments, this gives significant performance growth.  See
next patches for the details.

Note that the patch does not respect to empty memcg shrinkers, since we
never clear the bitmap bits after we set it once.  Their shrinkers will
be called again, with no shrinked objects as result.  This functionality
is provided by next patches.

[ktkhai@virtuozzo.com: v9]
  Link: http://lkml.kernel.org/r/153112558507.4097.12713813335683345488.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063066653.1818.976035462801487910.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b0dedc49
    • K
      mm, memcg: assign memcg-aware shrinkers bitmap to memcg · 0a4465d3
      由 Kirill Tkhai 提交于 
      Imagine a big node with many cpus, memory cgroups and containers.  Let
we have 200 containers, every container has 10 mounts, and 10 cgroups.
All container tasks don't touch foreign containers mounts.  If there is
intensive pages write, and global reclaim happens, a writing task has to
iterate over all memcgs to shrink slab, before it's able to go to
shrink_page_list().

Iteration over all the memcg slabs is very expensive: the task has to
visit 200 * 10 = 2000 shrinkers for every memcg, and since there are
2000 memcgs, the total calls are 2000 * 2000 = 4000000.

So, the shrinker makes 4 million do_shrink_slab() calls just to try to
isolate SWAP_CLUSTER_MAX pages in one of the actively writing memcg via
shrink_page_list().  I've observed a node spending almost 100% in
kernel, making useless iteration over already shrinked slab.

This patch adds bitmap of memcg-aware shrinkers to memcg.  The size of
the bitmap depends on bitmap_nr_ids, and during memcg life it's
maintained to be enough to fit bitmap_nr_ids shrinkers.  Every bit in
the map is related to corresponding shrinker id.

Next patches will maintain set bit only for really charged memcg.  This
will allow shrink_slab() to increase its performance in significant way.
See the last patch for the numbers.

[ktkhai@virtuozzo.com: v9]
  Link: http://lkml.kernel.org/r/153112549031.4097.3576147070498769979.stgit@localhost.localdomain
[ktkhai@virtuozzo.com: add comment to mem_cgroup_css_online()]
  Link: http://lkml.kernel.org/r/521f9e5f-c436-b388-fe83-4dc870bfb489@virtuozzo.com
Link: http://lkml.kernel.org/r/153063056619.1818.12550500883688681076.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0a4465d3
    • K
      mm: assign id to every memcg-aware shrinker · b4c2b231
      由 Kirill Tkhai 提交于 
      Introduce shrinker::id number, which is used to enumerate memcg-aware
shrinkers.  The number start from 0, and the code tries to maintain it
as small as possible.

This will be used to represent a memcg-aware shrinkers in memcg
shrinkers map.

Since all memcg-aware shrinkers are based on list_lru, which is
per-memcg in case of !CONFIG_MEMCG_KMEM only, the new functionality will
be under this config option.

[ktkhai@virtuozzo.com: v9]
  Link: http://lkml.kernel.org/r/153112546435.4097.10607140323811756557.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063054586.1818.6041047871606697364.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b4c2b231
    • G
      mm/vmscan.c: condense scan_control · bb451fdf
      由 Greg Thelen 提交于 
      Use smaller scan_control fields for order, priority, and reclaim_idx.
Convert fields from int => s8.  All easily fit within a byte:

 - allocation order range: 0..MAX_ORDER(64?)
 - priority range:         0..12(DEF_PRIORITY)
 - reclaim_idx range:      0..6(__MAX_NR_ZONES)

Since 6538b8ea ("x86_64: expand kernel stack to 16K") x86_64 stack
overflows are not an issue.  But it's inefficient to use ints.

Use s8 (signed byte) rather than u8 to allow for loops like:
	do {
		...
	} while (--sc.priority >= 0);

Add BUILD_BUG_ON to verify that s8 is capable of storing max values.

This reduces sizeof(struct scan_control):
 - 96 => 80 bytes (x86_64)
 - 68 => 56 bytes (i386)

scan_control structure field order is changed to utilize padding.  After
this patch there is 1 bit of scan_control padding.

akpm: makes my vmscan.o's .text 572 bytes smaller as well.

Link: http://lkml.kernel.org/r/20180530061212.84915-1-gthelen@google.comSigned-off-by: NGreg Thelen <gthelen@google.com>
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bb451fdf
  9. 08 6月, 2018 2 次提交
  11. 03 6月, 2018 1 次提交
  13. 16 4月, 2018 1 次提交
  15. 12 4月, 2018 7 次提交
    • M
      page cache: use xa_lock · b93b0163
      由 Matthew Wilcox 提交于 
      Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root.  Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.

[willy@infradead.org: fix nds32, fs/dax.c]
  Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b93b0163
    • J
      mm: memcg: make sure memory.events is uptodate when waking pollers · e27be240
      由 Johannes Weiner 提交于 
      Commit a983b5eb ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.

For memory.stat this is acceptable.  But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.

Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.

This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters.  That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.

[hannes@cmpxchg.org: "array subscript is above array bounds"]
  Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5eb ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NTejun Heo <tj@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e27be240
    • S
      mm, vmscan, tracing: use pointer to reclaim_stat struct in trace event · d51d1e64
      由 Steven Rostedt 提交于 
      The trace event trace_mm_vmscan_lru_shrink_inactive() currently has 12
parameters! Seven of them are from the reclaim_stat structure.  This
structure is currently local to mm/vmscan.c.  By moving it to the global
vmstat.h header, we can also reference it from the vmscan tracepoints.
In moving it, it brings down the overhead of passing so many arguments
to the trace event.  In the future, we may limit the number of arguments
that a trace event may pass (ideally just 6, but more realistically it
may be 8).

Before this patch, the code to call the trace event is this:

 0f 83 aa fe ff ff       jae    ffffffff811e6261 <shrink_inactive_list+0x1e1>
 48 8b 45 a0             mov    -0x60(%rbp),%rax
 45 8b 64 24 20          mov    0x20(%r12),%r12d
 44 8b 6d d4             mov    -0x2c(%rbp),%r13d
 8b 4d d0                mov    -0x30(%rbp),%ecx
 44 8b 75 cc             mov    -0x34(%rbp),%r14d
 44 8b 7d c8             mov    -0x38(%rbp),%r15d
 48 89 45 90             mov    %rax,-0x70(%rbp)
 8b 83 b8 fe ff ff       mov    -0x148(%rbx),%eax
 8b 55 c0                mov    -0x40(%rbp),%edx
 8b 7d c4                mov    -0x3c(%rbp),%edi
 8b 75 b8                mov    -0x48(%rbp),%esi
 89 45 80                mov    %eax,-0x80(%rbp)
 65 ff 05 e4 f7 e2 7e    incl   %gs:0x7ee2f7e4(%rip)        # 15bd0 <__preempt_count>
 48 8b 05 75 5b 13 01    mov    0x1135b75(%rip),%rax        # ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
 48 85 c0                test   %rax,%rax
 74 72                   je     ffffffff811e646a <shrink_inactive_list+0x3ea>
 48 89 c3                mov    %rax,%rbx
 4c 8b 10                mov    (%rax),%r10
 89 f8                   mov    %edi,%eax
 48 89 85 68 ff ff ff    mov    %rax,-0x98(%rbp)
 89 f0                   mov    %esi,%eax
 48 89 85 60 ff ff ff    mov    %rax,-0xa0(%rbp)
 89 c8                   mov    %ecx,%eax
 48 89 85 78 ff ff ff    mov    %rax,-0x88(%rbp)
 89 d0                   mov    %edx,%eax
 48 89 85 70 ff ff ff    mov    %rax,-0x90(%rbp)
 8b 45 8c                mov    -0x74(%rbp),%eax
 48 8b 7b 08             mov    0x8(%rbx),%rdi
 48 83 c3 18             add    $0x18,%rbx
 50                      push   %rax
 41 54                   push   %r12
 41 55                   push   %r13
 ff b5 78 ff ff ff       pushq  -0x88(%rbp)
 41 56                   push   %r14
 41 57                   push   %r15
 ff b5 70 ff ff ff       pushq  -0x90(%rbp)
 4c 8b 8d 68 ff ff ff    mov    -0x98(%rbp),%r9
 4c 8b 85 60 ff ff ff    mov    -0xa0(%rbp),%r8
 48 8b 4d 98             mov    -0x68(%rbp),%rcx
 48 8b 55 90             mov    -0x70(%rbp),%rdx
 8b 75 80                mov    -0x80(%rbp),%esi
 41 ff d2                callq  *%r10

After the patch:

 0f 83 a8 fe ff ff       jae    ffffffff811e626d <shrink_inactive_list+0x1cd>
 8b 9b b8 fe ff ff       mov    -0x148(%rbx),%ebx
 45 8b 64 24 20          mov    0x20(%r12),%r12d
 4c 8b 6d a0             mov    -0x60(%rbp),%r13
 65 ff 05 f5 f7 e2 7e    incl   %gs:0x7ee2f7f5(%rip)        # 15bd0 <__preempt_count>
 4c 8b 35 86 5b 13 01    mov    0x1135b86(%rip),%r14        # ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
 4d 85 f6                test   %r14,%r14
 74 2a                   je     ffffffff811e6411 <shrink_inactive_list+0x371>
 49 8b 06                mov    (%r14),%rax
 8b 4d 8c                mov    -0x74(%rbp),%ecx
 49 8b 7e 08             mov    0x8(%r14),%rdi
 49 83 c6 18             add    $0x18,%r14
 4c 89 ea                mov    %r13,%rdx
 45 89 e1                mov    %r12d,%r9d
 4c 8d 45 b8             lea    -0x48(%rbp),%r8
 89 de                   mov    %ebx,%esi
 51                      push   %rcx
 48 8b 4d 98             mov    -0x68(%rbp),%rcx
 ff d0                   callq  *%rax

Link: http://lkml.kernel.org/r/2559d7cb-ec60-1200-2362-04fa34fd02bb@fb.com
Link: http://lkml.kernel.org/r/20180322121003.4177af15@gandalf.local.homeSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d51d1e64
    • A
      mm/vmscan: don't mess with pgdat->flags in memcg reclaim · e3c1ac58
      由 Andrey Ryabinin 提交于 
      memcg reclaim may alter pgdat->flags based on the state of LRU lists in
cgroup and its children.  PGDAT_WRITEBACK may force kswapd to sleep
congested_wait(), PGDAT_DIRTY may force kswapd to writeback filesystem
pages.  But the worst here is PGDAT_CONGESTED, since it may force all
direct reclaims to stall in wait_iff_congested().  Note that only kswapd
have powers to clear any of these bits.  This might just never happen if
cgroup limits configured that way.  So all direct reclaims will stall as
long as we have some congested bdi in the system.

Leave all pgdat->flags manipulations to kswapd.  kswapd scans the whole
pgdat, only kswapd can clear pgdat->flags once node is balanced, thus
it's reasonable to leave all decisions about node state to kswapd.

Why only kswapd? Why not allow to global direct reclaim change these
flags? It is because currently only kswapd can clear these flags.  I'm
less worried about the case when PGDAT_CONGESTED falsely not set, and
more worried about the case when it falsely set.  If direct reclaimer
sets PGDAT_CONGESTED, do we have guarantee that after the congestion
problem is sorted out, kswapd will be woken up and clear the flag? It
seems like there is no such guarantee.  E.g.  direct reclaimers may
eventually balance pgdat and kswapd simply won't wake up (see
wakeup_kswapd()).

Moving pgdat->flags manipulation to kswapd, means that cgroup2 recalim
now loses its congestion throttling mechanism.  Add per-cgroup
congestion state and throttle cgroup2 reclaimers if memcg is in
congestion state.

Currently there is no need in per-cgroup PGDAT_WRITEBACK and PGDAT_DIRTY
bits since they alter only kswapd behavior.

The problem could be easily demonstrated by creating heavy congestion in
one cgroup:

    echo "+memory" > /sys/fs/cgroup/cgroup.subtree_control
    mkdir -p /sys/fs/cgroup/congester
    echo 512M > /sys/fs/cgroup/congester/memory.max
    echo $$ > /sys/fs/cgroup/congester/cgroup.procs
    /* generate a lot of diry data on slow HDD */
    while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
    ....
    while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &

and some job in another cgroup:

    mkdir /sys/fs/cgroup/victim
    echo 128M > /sys/fs/cgroup/victim/memory.max

    # time cat /dev/sda > /dev/null
    real    10m15.054s
    user    0m0.487s
    sys     1m8.505s

According to the tracepoint in wait_iff_congested(), the 'cat' spent 50%
of the time sleeping there.

With the patch, cat don't waste time anymore:

    # time cat /dev/sda > /dev/null
    real    5m32.911s
    user    0m0.411s
    sys     0m56.664s

[aryabinin@virtuozzo.com: congestion state should be per-node]
  Link: http://lkml.kernel.org/r/20180406135215.10057-1-aryabinin@virtuozzo.com
[ayabinin@virtuozzo.com: make congestion state per-cgroup-per-node instead of just per-cgroup[
  Link: http://lkml.kernel.org/r/20180406180254.8970-2-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-5-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e3c1ac58
    • A
      mm/vmscan: don't change pgdat state on base of a single LRU list state · d108c772
      由 Andrey Ryabinin 提交于 
      We have separate LRU list for each memory cgroup.  Memory reclaim
iterates over cgroups and calls shrink_inactive_list() every inactive
LRU list.  Based on the state of a single LRU shrink_inactive_list() may
flag the whole node as dirty,congested or under writeback.  This is
obviously wrong and hurtful.  It's especially hurtful when we have
possibly small congested cgroup in system.  Than *all* direct reclaims
waste time by sleeping in wait_iff_congested().  And the more memcgs in
the system we have the longer memory allocation stall is, because
wait_iff_congested() called on each lru-list scan.

Sum reclaim stats across all visited LRUs on node and flag node as
dirty, congested or under writeback based on that sum.  Also call
congestion_wait(), wait_iff_congested() once per pgdat scan, instead of
once per lru-list scan.

This only fixes the problem for global reclaim case.  Per-cgroup reclaim
may alter global pgdat flags too, which is wrong.  But that is separate
issue and will be addressed in the next patch.

This change will not have any effect on a systems with all workload
concentrated in a single cgroup.

[aryabinin@virtuozzo.com: check nr_writeback against all nr_taken, not just file]
  Link: http://lkml.kernel.org/r/20180406180254.8970-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-4-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d108c772
    • A
      mm/vmscan: remove redundant current_may_throttle() check · c4fd4fa5
      由 Andrey Ryabinin 提交于 
      Only kswapd can have non-zero nr_immediate, and current_may_throttle()
is always true for kswapd (PF_LESS_THROTTLE bit is never set) thus it's
enough to check stat.nr_immediate only.

Link: http://lkml.kernel.org/r/20180315164553.17856-4-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c4fd4fa5
    • A
      mm/vmscan: update stale comments · 894befec
      由 Andrey Ryabinin 提交于 
      Update some comments that became stale since transiton from per-zone to
per-node reclaim.

Link: http://lkml.kernel.org/r/20180315164553.17856-2-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      894befec
  17. 06 4月, 2018 3 次提交
  19. 23 3月, 2018 1 次提交
    • A
      mm/vmscan: wake up flushers for legacy cgroups too · 1c610d5f
      由 Andrey Ryabinin 提交于 
      Commit 726d061f ("mm: vmscan: kick flushers when we encounter dirty
pages on the LRU") added flusher invocation to shrink_inactive_list()
when many dirty pages on the LRU are encountered.

However, shrink_inactive_list() doesn't wake up flushers for legacy
cgroup reclaim, so the next commit bbef9384 ("mm: vmscan: remove old
flusher wakeup from direct reclaim path") removed the only source of
flusher's wake up in legacy mem cgroup reclaim path.

This leads to premature OOM if there is too many dirty pages in cgroup:
    # mkdir /sys/fs/cgroup/memory/test
    # echo $$ > /sys/fs/cgroup/memory/test/tasks
    # echo 50M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
    # dd if=/dev/zero of=tmp_file bs=1M count=100
    Killed

    dd invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0

    Call Trace:
     dump_stack+0x46/0x65
     dump_header+0x6b/0x2ac
     oom_kill_process+0x21c/0x4a0
     out_of_memory+0x2a5/0x4b0
     mem_cgroup_out_of_memory+0x3b/0x60
     mem_cgroup_oom_synchronize+0x2ed/0x330
     pagefault_out_of_memory+0x24/0x54
     __do_page_fault+0x521/0x540
     page_fault+0x45/0x50

    Task in /test killed as a result of limit of /test
    memory: usage 51200kB, limit 51200kB, failcnt 73
    memory+swap: usage 51200kB, limit 9007199254740988kB, failcnt 0
    kmem: usage 296kB, limit 9007199254740988kB, failcnt 0
    Memory cgroup stats for /test: cache:49632KB rss:1056KB rss_huge:0KB shmem:0KB
            mapped_file:0KB dirty:49500KB writeback:0KB swap:0KB inactive_anon:0KB
	    active_anon:1168KB inactive_file:24760KB active_file:24960KB unevictable:0KB
    Memory cgroup out of memory: Kill process 3861 (bash) score 88 or sacrifice child
    Killed process 3876 (dd) total-vm:8484kB, anon-rss:1052kB, file-rss:1720kB, shmem-rss:0kB
    oom_reaper: reaped process 3876 (dd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

Wake up flushers in legacy cgroup reclaim too.

Link: http://lkml.kernel.org/r/20180315164553.17856-1-aryabinin@virtuozzo.com
Fixes: bbef9384 ("mm: vmscan: remove old flusher wakeup from direct reclaim path")
Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1c610d5f
  21. 22 2月, 2018 1 次提交
    • S
      mm, mlock, vmscan: no more skipping pagevecs · 9c4e6b1a
      由 Shakeel Butt 提交于 
      When a thread mlocks an address space backed either by file pages which
are currently not present in memory or swapped out anon pages (not in
swapcache), a new page is allocated and added to the local pagevec
(lru_add_pvec), I/O is triggered and the thread then sleeps on the page.
On I/O completion, the thread can wake on a different CPU, the mlock
syscall will then sets the PageMlocked() bit of the page but will not be
able to put that page in unevictable LRU as the page is on the pagevec
of a different CPU.  Even on drain, that page will go to evictable LRU
because the PageMlocked() bit is not checked on pagevec drain.

The page will eventually go to right LRU on reclaim but the LRU stats
will remain skewed for a long time.

This patch puts all the pages, even unevictable, to the pagevecs and on
the drain, the pages will be added on their LRUs correctly by checking
their evictability.  This resolves the mlocked pages on pagevec of other
CPUs issue because when those pagevecs will be drained, the mlocked file
pages will go to unevictable LRU.  Also this makes the race with munlock
easier to resolve because the pagevec drains happen in LRU lock.

However there is still one place which makes a page evictable and does
PageLRU check on that page without LRU lock and needs special attention.
TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock().

	#0: __pagevec_lru_add_fn	#1: clear_page_mlock

	SetPageLRU()			if (!TestClearPageMlocked())
					  return
	smp_mb() // <--required
					// inside does PageLRU
	if (!PageMlocked())		if (isolate_lru_page())
	  move to evictable LRU		  putback_lru_page()
	else
	  move to unevictable LRU

In '#1', TestClearPageMlocked() provides full memory barrier semantics
and thus the PageLRU check (inside isolate_lru_page) can not be
reordered before it.

In '#0', without explicit memory barrier, the PageMlocked() check can be
reordered before SetPageLRU().  If that happens, '#0' can put a page in
unevictable LRU and '#1' might have just cleared the Mlocked bit of that
page but fails to isolate as PageLRU fails as '#0' still hasn't set
PageLRU bit of that page.  That page will be stranded on the unevictable
LRU.

There is one (good) side effect though.  Without this patch, the pages
allocated for System V shared memory segment are added to evictable LRUs
even after shmctl(SHM_LOCK) on that segment.  This patch will correctly
put such pages to unevictable LRU.

Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9c4e6b1a
  23. 07 2月, 2018 1 次提交
  25. 01 2月, 2018 4 次提交
    • M
      mm: pin address_space before dereferencing it while isolating an LRU page · 69d763fc
      由 Mel Gorman 提交于 
      Minchan Kim asked the following question -- what locks protects
address_space destroying when race happens between inode trauncation and
__isolate_lru_page? Jan Kara clarified by describing the race as follows

CPU1                                            CPU2

truncate(inode)                                 __isolate_lru_page()
  ...
  truncate_inode_page(mapping, page);
    delete_from_page_cache(page)
      spin_lock_irqsave(&mapping->tree_lock, flags);
        __delete_from_page_cache(page, NULL)
          page_cache_tree_delete(..)
            ...                                   mapping = page_mapping(page);
            page->mapping = NULL;
            ...
      spin_unlock_irqrestore(&mapping->tree_lock, flags);
      page_cache_free_page(mapping, page)
        put_page(page)
          if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space

                                                  if (mapping && !mapping->a_ops->migratepage)
- we've dereferenced mapping which is potentially already free.

The race is theoretically possible but unlikely.  Before the
delete_from_page_cache, truncate_cleanup_page is called so the page is
likely to be !PageDirty or PageWriteback which gets skipped by the only
caller that checks the mappping in __isolate_lru_page.  Even if the race
occurs, a substantial amount of work has to happen during a tiny window
with no preemption but it could potentially be done using a virtual
machine to artifically slow one CPU or halt it during the critical
window.

This patch should eliminate the race with truncation by try-locking the
page before derefencing mapping and aborting if the lock was not
acquired.  There was a suggestion from Huang Ying to use RCU as a
side-effect to prevent mapping being freed.  However, I do not like the
solution as it's an unconventional means of preserving a mapping and
it's not a context where rcu_read_lock is obviously protecting rcu data.

Link: http://lkml.kernel.org/r/20180104102512.2qos3h5vqzeisrek@techsingularity.net
Fixes: c8244935 ("mm: compaction: make isolate_lru_page() filter-aware again")
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      69d763fc
    • J
      mm: remove unused pgdat_reclaimable_pages() · a4ef8768
      由 Jan Kara 提交于 
      Remove unused function pgdat_reclaimable_pages() and
node_page_state_snapshot() which becomes unused as well.

Link: http://lkml.kernel.org/r/20171122094416.26019-1-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a4ef8768
    • M
      mm: do not stall register_shrinker() · e496612c
      由 Minchan Kim 提交于 
      Shakeel Butt reported he has observed in production systems that the job
loader gets stuck for 10s of seconds while doing a mount operation.  It
turns out that it was stuck in register_shrinker() because some
unrelated job was under memory pressure and was spending time in
shrink_slab().  Machines have a lot of shrinkers registered and jobs
under memory pressure have to traverse all of those memcg-aware
shrinkers and affect unrelated jobs which want to register their own
shrinkers.

To solve the issue, this patch simply bails out slab shrinking if it is
found that someone wants to register a shrinker in parallel.  A downside
is it could cause unfair shrinking between shrinkers.  However, it
should be rare and we can add compilcated logic if we find it's not
enough.

[akpm@linux-foundation.org: tweak code comment]
Link: http://lkml.kernel.org/r/20171115005602.GB23810@bbox
Link: http://lkml.kernel.org/r/1511481899-20335-1-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NShakeel Butt <shakeelb@google.com>
Reported-by: NShakeel Butt <shakeelb@google.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e496612c
    • J
      mm: use sc->priority for slab shrink targets · 9092c71b
      由 Josef Bacik 提交于 
      Previously we were using the ratio of the number of lru pages scanned to
the number of eligible lru pages to determine the number of slab objects
to scan.  The problem with this is that these two things have nothing to
do with each other, so in slab heavy work loads where there is little to
no page cache we can end up with the pages scanned being a very low
number.  This means that we reclaim next to no slab pages and waste a
lot of time reclaiming small amounts of space.

Consider the following scenario, where we have the following values and
the rest of the memory usage is in slab

  Active:            58840 kB
  Inactive:          46860 kB

Every time we do a get_scan_count() we do this

  scan = size >> sc->priority

where sc->priority starts at DEF_PRIORITY, which is 12.  The first loop
through reclaim would result in a scan target of 2 pages to 11715 total
inactive pages, and 3 pages to 14710 total active pages.  This is a
really really small target for a system that is entirely slab pages.
And this is super optimistic, this assumes we even get to scan these
pages.  We don't increment sc->nr_scanned unless we 1) isolate the page,
which assumes it's not in use, and 2) can lock the page.  Under pressure
these numbers could probably go down, I'm sure there's some random pages
from daemons that aren't actually in use, so the targets get even
smaller.

Instead use sc->priority in the same way we use it to determine scan
amounts for the lru's.  This generally equates to pages.  Consider the
following

  slab_pages = (nr_objects * object_size) / PAGE_SIZE

What we would like to do is

  scan = slab_pages >> sc->priority

but we don't know the number of slab pages each shrinker controls, only
the objects.  However say that theoretically we knew how many pages a
shrinker controlled, we'd still have to convert this to objects, which
would look like the following

  scan = shrinker_pages >> sc->priority
  scan_objects = (PAGE_SIZE / object_size) * scan

or written another way

  scan_objects = (shrinker_pages >> sc->priority) *
		 (PAGE_SIZE / object_size)

which can thus be written

  scan_objects = ((shrinker_pages * PAGE_SIZE) / object_size) >>
		 sc->priority

which is just

  scan_objects = nr_objects >> sc->priority

We don't need to know exactly how many pages each shrinker represents,
it's objects are all the information we need.  Making this change allows
us to place an appropriate amount of pressure on the shrinker pools for
their relative size.

Link: http://lkml.kernel.org/r/1510780549-6812-1-git-send-email-josef@toxicpanda.comSigned-off-by: NJosef Bacik <jbacik@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NDave Chinner <david@fromorbit.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9092c71b
  27. 19 12月, 2017 1 次提交
    • T
      mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed. · bb422a73
      由 Tetsuo Handa 提交于 
      Syzbot caught an oops at unregister_shrinker() because combination of
commit 1d3d4437 ("vmscan: per-node deferred work") and fault
injection made register_shrinker() fail and the caller of
register_shrinker() did not check for failure.

----------
[  554.881422] FAULT_INJECTION: forcing a failure.
[  554.881422] name failslab, interval 1, probability 0, space 0, times 0
[  554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.881445] Call Trace:
[  554.881459]  dump_stack+0x194/0x257
[  554.881474]  ? arch_local_irq_restore+0x53/0x53
[  554.881486]  ? find_held_lock+0x35/0x1d0
[  554.881507]  should_fail+0x8c0/0xa40
[  554.881522]  ? fault_create_debugfs_attr+0x1f0/0x1f0
[  554.881537]  ? check_noncircular+0x20/0x20
[  554.881546]  ? find_next_zero_bit+0x2c/0x40
[  554.881560]  ? ida_get_new_above+0x421/0x9d0
[  554.881577]  ? find_held_lock+0x35/0x1d0
[  554.881594]  ? __lock_is_held+0xb6/0x140
[  554.881628]  ? check_same_owner+0x320/0x320
[  554.881634]  ? lock_downgrade+0x990/0x990
[  554.881649]  ? find_held_lock+0x35/0x1d0
[  554.881672]  should_failslab+0xec/0x120
[  554.881684]  __kmalloc+0x63/0x760
[  554.881692]  ? lock_downgrade+0x990/0x990
[  554.881712]  ? register_shrinker+0x10e/0x2d0
[  554.881721]  ? trace_event_raw_event_module_request+0x320/0x320
[  554.881737]  register_shrinker+0x10e/0x2d0
[  554.881747]  ? prepare_kswapd_sleep+0x1f0/0x1f0
[  554.881755]  ? _down_write_nest_lock+0x120/0x120
[  554.881765]  ? memcpy+0x45/0x50
[  554.881785]  sget_userns+0xbcd/0xe20
(...snipped...)
[  554.898693] kasan: CONFIG_KASAN_INLINE enabled
[  554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  554.898732] general protection fault: 0000 [#1] SMP KASAN
[  554.898737] Dumping ftrace buffer:
[  554.898741]    (ftrace buffer empty)
[  554.898743] Modules linked in:
[  554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000
[  554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150
[  554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246
[  554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0
[  554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004
[  554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000
[  554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98
[  554.898800] FS:  0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
[  554.898804] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[  554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0
[  554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
[  554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
[  554.898818] Call Trace:
[  554.898828]  unregister_shrinker+0x79/0x300
[  554.898837]  ? perf_trace_mm_vmscan_writepage+0x750/0x750
[  554.898844]  ? down_write+0x87/0x120
[  554.898851]  ? deactivate_super+0x139/0x1b0
[  554.898857]  ? down_read+0x150/0x150
[  554.898864]  ? check_same_owner+0x320/0x320
[  554.898875]  deactivate_locked_super+0x64/0xd0
[  554.898883]  deactivate_super+0x141/0x1b0
----------

Since allowing register_shrinker() callers to call unregister_shrinker()
when register_shrinker() failed can simplify error recovery path, this
patch makes unregister_shrinker() no-op when register_shrinker() failed.
Also, reset shrinker->nr_deferred in case unregister_shrinker() was
by error called twice.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAliaksei Karaliou <akaraliou.dev@gmail.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      bb422a73
  29. 16 11月, 2017 2 次提交
  31. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  33. 03 10月, 2017 1 次提交
  35. 07 9月, 2017 1 次提交
    • H
      mm, THP, swap: add THP swapping out fallback counting · fe490cc0
      由 Huang Ying 提交于 
      When swapping out THP (Transparent Huge Page), instead of swapping out
the THP as a whole, sometimes we have to fallback to split the THP into
normal pages before swapping, because no free swap clusters are
available, or cgroup limit is exceeded, etc.  To count the number of the
fallback, a new VM event THP_SWPOUT_FALLBACK is added, and counted when
we fallback to split the THP.

Link: http://lkml.kernel.org/r/20170724051840.2309-13-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fe490cc0