1. 28 8月, 2014 7 次提交
  2. 27 8月, 2014 2 次提交
  3. 26 8月, 2014 15 次提交
    • W
      drm/msm: Fix missing unlock on error in msm_fbdev_create() · 0d9509d2
      Wei Yongjun 提交于
      Add the missing unlock before return from function msm_fbdev_create()
      in the error handling case.
      Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
      Signed-off-by: NRob Clark <robdclark@gmail.com>
      0d9509d2
    • R
      drm/msm: fix compile error for non-dt builds · 12313c2a
      Rob Clark 提交于
      Signed-off-by: NRob Clark <robdclark@gmail.com>
      12313c2a
    • R
      drm/msm/mdp4: request vblank during modeset · 119ecb7f
      Rob Clark 提交于
      This avoids a problem seen with weston (for example) where the display
      gets stuck in "black screen" if starting weston first thing after boot.
      Possibly mdp5 needs something similar.  The downstream android fbdev
      driver always requests DMA_E (or DMA_P) when display is active, rather
      than only enabling it on-demand as the drm driver does, which I believe
      has the same end result.
      Signed-off-by: NRob Clark <robdclark@gmail.com>
      119ecb7f
    • R
      drm/msm: avoid flood of kernel logs on faults · 6814dbf9
      Rob Clark 提交于
      87e956e9 changed the fault handler to return -ENOSYS, which causes the
      iommu driver to print out a huge splat.  Which wouldn't be quite so bad
      if nothing ever faulted.  But seems like some EXA composite operations
      generate quite a lot of (seemingly harmless) faults.  That is probably a
      userspace problem, but the huge increase in verbosity from iommu fault
      dumps makes things kind of unusable.
      
      We probably should actually log *some* message (not conditional on
      drm.debug).  But ratelimit it.
      Signed-off-by: NRob Clark <robdclark@gmail.com>
      6814dbf9
    • J
      drm: sti: Add missing dependency on RESET_CONTROLLER · f5ec6c4b
      Jingoo Han 提交于
      Add missing dependency on RESET_CONTROLLER in order to fix
      the following build error.
      
      drivers/gpu/drm/sti/sti_hdmi.c: In function 'sti_hdmi_probe'
      drivers/gpu/drm/sti/sti_hdmi.c:780:2: error: implicit declaration of function 'devm_reset_control_get'
      [-Werror=implicit-function-declaration]
      
      Benjamin Gaignard remark:
      I have change "depends on" to "select" but keep the original author name.
      Signed-off-by: NJingoo Han <jg1.han@samsung.com>
      f5ec6c4b
    • K
      drm: sti: Make of_device_id array const · 8e932cf0
      Kiran Padwal 提交于
      Make of_device_id array const, because all OF functions handle it as const.
      Signed-off-by: NKiran Padwal <kiran.padwal@smartplayin.com>
      8e932cf0
    • W
      drm: sti: Fix return value check in sti_drm_platform_probe() · eacd9aa9
      Wei Yongjun 提交于
      In case of error, the function platform_device_register_resndata()
      returns ERR_PTR() and never returns NULL. The NULL test in the return
      value check should be replaced with IS_ERR().
      Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
      eacd9aa9
    • W
      drm: sti: hda: fix return value check in sti_hda_probe() · 5024a2b7
      Wei Yongjun 提交于
      In case of error, the function devm_ioremap_nocache() returns NULL
      pointer not ERR_PTR(). The IS_ERR() test in the return value check
      should be replaced with NULL test.
      Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
      5024a2b7
    • W
      drm: sti: hdmi: fix return value check in sti_hdmi_probe() · 88cfc3fb
      Wei Yongjun 提交于
      In case of error, the function devm_ioremap_nocache() returns NULL
      pointer not ERR_PTR(). The IS_ERR() test in the return value check
      should be replaced with NULL test.
      Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
      88cfc3fb
    • W
      drm: sti: tvout: fix return value check in sti_tvout_probe() · 31f32a21
      Wei Yongjun 提交于
      In case of error, the function devm_ioremap_nocache() returns NULL
      pointer not ERR_PTR(). The IS_ERR() test in the return value check
      should be replaced with NULL test.
      Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
      31f32a21
    • L
      Linux 3.17-rc2 · 52addcf9
      Linus Torvalds 提交于
      52addcf9
    • L
      Merge tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · f01bfc97
      Linus Torvalds 提交于
      Pull NFS client fixes from Trond Myklebust:
       "Highlights:
      
         - more fixes for read/write codepath regressions
           * sleeping while holding the inode lock
           * stricter enforcement of page contiguity when coalescing requests
           * fix up error handling in the page coalescing code
      
         - don't busy wait on SIGKILL in the file locking code"
      
      * tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
        nfs: can_coalesce_requests must enforce contiguity
        nfs: disallow duplicate pages in pgio page vectors
        nfs: don't sleep with inode lock in lock_and_join_requests
        nfs: fix error handling in lock_and_join_requests
        nfs: use blocking page_group_lock in add_request
        nfs: fix nonblocking calls to nfs_page_group_lock
        nfs: change nfs_page_group_lock argument
      f01bfc97
    • L
      Merge tag 'renesas-sh-drivers-for-v3.17' of... · dd5957b7
      Linus Torvalds 提交于
      Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
      
      Pull SH driver fix from Simon Horman:
       "Confine SH_INTC to platforms that need it"
      
      * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        sh: intc: Confine SH_INTC to platforms that need it
      dd5957b7
    • L
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 497c01dd
      Linus Torvalds 提交于
      Pull MIPS fixes from Ralf Baechle:
       "Pretty much all across the field so with this we should be in
        reasonable shape for the upcoming -rc2"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: OCTEON: make get_system_type() thread-safe
        MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
        MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
        MIPS: EVA: Add new EVA header
        MIPS: scall64-o32: Fix indirect syscall detection
        MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
        MIPS: Loongson: Fix COP2 usage for preemptible kernel
        MIPS: NL: Fix nlm_xlp_defconfig build error
        MIPS: Remove race window in page fault handling
        MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G
        MIPS: Alchemy: Fix db1200 PSC clock enablement
        MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785
        MIPS: Remove duplicated include from numa.c
        MIPS: Add common plat_irq_dispatch declaration
        MIPS: MSP71xx: remove unused plat_irq_dispatch() argument
        MIPS: GIC: Remove useless parens from GICBIS().
        MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
      497c01dd
    • L
      Merge tag 'trace-fixes-v3.17-rc1' of... · 01e9982a
      Linus Torvalds 提交于
      Merge tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
      
      Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt:
       "The rewrite of the ftrace code that makes it possible to allow for
        separate trampolines had a design flaw with the interaction between
        the function and function_graph tracers.
      
        The main flaw was the simplification of the use of multiple tracers
        having the same filter (like function and function_graph, that use the
        set_ftrace_filter file to filter their code).  The design assumed that
        the two tracers could never run simultaneously as only one tracer can
        be used at a time.  The problem with this assumption was that the
        function profiler could be implemented on top of the function graph
        tracer, and the function profiler could run at the same time as the
        function tracer.  This caused the assumption to be broken and when
        ftrace detected this failed assumpiton it would spit out a nasty
        warning and shut itself down.
      
        Instead of using a single ftrace_ops that switches between the
        function and function_graph callbacks, the two tracers can again use
        their own ftrace_ops.  But instead of having a complex hierarchy of
        ftrace_ops, the filter fields are placed in its own structure and the
        ftrace_ops can carefully use the same filter.  This change took a bit
        to be able to allow for this and currently only the global_ops can
        share the same filter, but this new design can easily be modified to
        allow for any ftrace_ops to share its filter with another ftrace_ops.
      
        The first four patches deal with the change of allowing the ftrace_ops
        to share the filter (and this needs to go to 3.16 as well).
      
        The fifth patch fixes a bug that was also caused by the new changes
        but only for archs other than x86, and only if those archs implement a
        direct call to the function_graph tracer which they do not do yet but
        will in the future.  It does not need to go to stable, but needs to be
        fixed before the other archs update their code to allow direct calls
        to the function_graph trampoline"
      
      * tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        ftrace: Use current addr when converting to nop in __ftrace_replace_code()
        ftrace: Fix function_profiler and function tracer together
        ftrace: Fix up trampoline accounting with looping on hash ops
        ftrace: Update all ftrace_ops for a ftrace_hash_ops update
        ftrace: Allow ftrace_ops to use the hashes from other ops
      01e9982a
  4. 25 8月, 2014 10 次提交
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 7be141d0
      Linus Torvalds 提交于
      Pull x86 fixes from Ingo Molnar:
       "A couple of EFI fixes, plus misc fixes all around the map"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        efi/arm64: Store Runtime Services revision
        firmware: Do not use WARN_ON(!spin_is_locked())
        x86_32, entry: Clean up sysenter_badsys declaration
        x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path
        x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly
        x86/mm: Fix RCU splat from new TLB tracepoints
      7be141d0
    • L
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 44744bb3
      Linus Torvalds 提交于
      Pull perf fixes from Ingo Molnar:
       "A kprobes and a perf compat ioctl fix"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf: Handle compat ioctl
        kprobes: Skip kretprobe hit in NMI context to avoid deadlock
      44744bb3
    • L
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 959dc258
      Linus Torvalds 提交于
      Pull ARM SoC fixes from Olof Johansson:
       "A collection of fixes from this week, it's been pretty quiet and
        nothing really stands out as particularly noteworthy here -- mostly
        minor fixes across the field:
      
         - ODROID booting was fixed due to PMIC interrupts missing in DT
         - a collection of i.MX fixes
         - minor Tegra fix for regulators
         - Rockchip fix and addition of SoC-specific mailing list to make it
           easier to find posted patches"
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        bus: arm-ccn: Fix warning message
        ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
        ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
        MAINTAINERS: add new Rockchip SoC list
        ARM: dts: rockchip: readd missing mmc0 pinctrl settings
        ARM: dts: ODROID i2c improvements
        ARM: dts: Enable PMIC interrupts on ODROID
        ARM: dts: imx6sx: fix the pad setting for uart CTS_B
        ARM: dts: i.MX53: fix apparent bug in VPU clks
        ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting
        ARM: dts: imx6: edmqmx6: change enet reset pin
        ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.
        ARM: imx: remove unnecessary ARCH_HAS_OPP select
        ARM: imx: fix TLB missing of IOMUXC base address during suspend
        ARM: imx6: fix SMP compilation again
        ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
      959dc258
    • L
      Merge tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · fa7f78e0
      Linus Torvalds 提交于
      Pull gpio fixes from Linus Walleij:
      
       - a largeish fix for the IRQ handling in the new Zynq driver.  The
         quite verbose commit message gives the exact details.
       - move some defines for gpiod flags outside an ifdef to make stub
         functions work again.
       - various minor fixes that we can accept for -rc1.
      
      * tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio-lynxpoint: enable input sensing in resume
        gpio: move GPIOD flags outside #ifdef
        gpio: delete unneeded test before of_node_put
        gpio: zynq: Fix IRQ handlers
        gpiolib: devres: use correct structure type name in sizeof
        MAINTAINERS: Change maintainer for gpio-bcm-kona.c
      fa7f78e0
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 5e30ca1e
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Intel and radeon fixes.
      
        Post KS/LC git requests from i915 and radeon stacked up.  They are all
        fixes along with some new pci ids for radeon, and one maintainers file
        entry.
      
         - i915: display fixes and irq fixes
         - radeon: pci ids, and misc gpuvm, dpm and hdp cache"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits)
        MAINTAINERS: Add entry for Renesas DRM drivers
        drm/radeon: add additional SI pci ids
        drm/radeon: add new bonaire pci ids
        drm/radeon: add new KV pci id
        Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe"
        drm/radeon: fix active_cu mask on SI and CIK after re-init (v3)
        drm/radeon: fix active cu count for SI and CIK
        drm/radeon: re-enable selective GPUVM flushing
        drm/radeon: Sync ME and PFP after CP semaphore waits v4
        drm/radeon: fix display handling in radeon_gpu_reset
        drm/radeon: fix pm handling in radeon_gpu_reset
        drm/radeon: Only flush HDP cache for indirect buffers from userspace
        drm/radeon: properly document reloc priority mask
        drm/i915: don't try to retrain a DP link on an inactive CRTC
        drm/i915: make sure VDD is turned off during system suspend
        drm/i915: cancel hotplug and dig_port work during suspend and unload
        drm/i915: fix HPD IRQ reenable work cancelation
        drm/i915: take display port power domain in DP HPD handler
        drm/i915: Don't try to enable cursor from setplane when crtc is disabled
        drm/i915: Skip load detect when intel_crtc->new_enable==true
        ...
      5e30ca1e
    • B
      aio: fix reqs_available handling · d856f32a
      Benjamin LaHaise 提交于
      As reported by Dan Aloni, commit f8567a38 ("aio: fix aio request
      leak when events are reaped by userspace") introduces a regression when
      user code attempts to perform io_submit() with more events than are
      available in the ring buffer.  Reverting that commit would reintroduce a
      regression when user space event reaping is used.
      
      Fixing this bug is a bit more involved than the previous attempts to fix
      this regression.  Since we do not have a single point at which we can
      count events as being reaped by user space and io_getevents(), we have
      to track event completion by looking at the number of events left in the
      event ring.  So long as there are as many events in the ring buffer as
      there have been completion events generate, we cannot call
      put_reqs_available().  The code to check for this is now placed in
      refill_reqs_available().
      
      A test program from Dan and modified by me for verifying this bug is available
      at http://www.kvack.org/~bcrl/20140824-aio_bug.c .
      Reported-by: NDan Aloni <dan@kernelim.com>
      Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
      Acked-by: NDan Aloni <dan@kernelim.com>
      Cc: Kent Overstreet <kmo@daterainc.com>
      Cc: Mateusz Guzik <mguzik@redhat.com>
      Cc: Petr Matousek <pmatouse@redhat.com>
      Cc: stable@vger.kernel.org      # v3.16 and anything that f8567a38 was backported to
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d856f32a
    • P
      bus: arm-ccn: Fix warning message · bf87bb12
      Pawel Moll 提交于
      A message warning a user about wrong vc value was printing
      out port instead.
      Reported-by: NDrew Richardson <drew.richardson@arm.com>
      Signed-off-by: NPawel Moll <pawel.moll@arm.com>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      bf87bb12
    • G
      ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux · 12266db7
      Geert Uytterhoeven 提交于
      On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts
      refers to non-existent pinmux configuration data:
      
      pinmux core: sh-pfc does not support function i2c6
      sh-pfc e6060000.pfc: invalid function i2c6 in map table
      
      Remove it to fix this.
      
      Fixes: commit 1d41f36a ("ARM: shmobile:
             koelsch dts: Add VDD MPU regulator for DVFS")
      Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
      Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      12266db7
    • M
      ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies · caa9eac5
      Marcel Ziswiler 提交于
      Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised
      that the current device tree source includes for our modules only
      happen to work due to referencing the on-carrier 5v0 supply from USB
      which is not at all available on-module. The modules actually contain
      TPS60150 charge pumps to generate the PMIC required 5 volts from the
      one and only 3.3 volt module supply. This patch fixes this.
      
      (Note: When back-porting this to v3.16 stable releases, simply drop the
      change to tegra30-apalis.dtsi; that file was added in v3.17)
      
      Cc: <stable@vger.kernel.org> #v3.16+
      Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
      Signed-off-by: NStephen Warren <swarren@nvidia.com>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      caa9eac5
    • O
      Merge tag 'v3.17-rockchip-fixes1' of... · 9d0b1f34
      Olof Johansson 提交于
      Merge tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
      
      Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner:
      
      Pinctrl that got accidentially dropped when reorganizing the
      dts files and addition of the new Rockchip list to MAINTAINERS.
      
      * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
        MAINTAINERS: add new Rockchip SoC list
        ARM: dts: rockchip: readd missing mmc0 pinctrl settings
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      9d0b1f34
  5. 24 8月, 2014 2 次提交
  6. 23 8月, 2014 4 次提交
    • H
      MAINTAINERS: add new Rockchip SoC list · 00250b52
      Heiko Stuebner 提交于
      Add the new list that Rockchip-specific patches should also be directed to.
      Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
      00250b52
    • H
      ARM: dts: rockchip: readd missing mmc0 pinctrl settings · 1302d32c
      Heiko Stuebner 提交于
      During the restructuring of the Rockchip Cortex-A9 dtsi files it seems
      like the pinctrl settings vanished at some point from the mmc0 support.
      
      This of course renders them unusable, so readd the necessary pinctrl
      properties.
      Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
      1302d32c
    • O
      Merge tag 'sunxi-dt-for-3.17-2' of... · 2136edf3
      Olof Johansson 提交于
      Merge tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
      
      Merge "Allwinner DT changes, take 2" from Maxime Ripard:
      
      Only a single patch in here that fixes a DTC warning.
      
      * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
        ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      2136edf3
    • S
      ftrace: Use current addr when converting to nop in __ftrace_replace_code() · 39b5552c
      Steven Rostedt (Red Hat) 提交于
      In __ftrace_replace_code(), when converting the call to a nop in a function
      it needs to compare against the "curr" (current) value of the ftrace ops, and
      not the "new" one. It currently does not affect x86 which is the only arch
      to do the trampolines with function graph tracer, but when other archs that do
      depend on this code implement the function graph trampoline, it can crash.
      
      Here's an example when ARM uses the trampolines (in the future):
      
       ------------[ cut here ]------------
       WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4()
       Modules linked in: omap_rng rng_core ipv6
       CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52
       [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24)
       [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94)
       [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c)
       [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34)
       [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4)
       [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c)
       [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164)
       [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c)
       [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134)
       [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130)
       [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc)
       [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc)
       [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20)
       ---[ end trace dc9ce72c5b617d8f ]---
      [   65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c
      [   65.054070]  actual: 85:1b:00:eb
      
      Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global"
      Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      39b5552c