- 25 1月, 2017 6 次提交
-
-
由 stephen hemminger 提交于
Put all the per-channel state together in one data struct. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Allow setting receive indirection table. Also uses the system standard for initialization. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This allows for number of channels to be managed in a manner similar to existing hardware drivers. It also removes the restriction of maximum 8 channels and allows as many as the host will allow. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
For some cases it is useful to be able to change RSS key value. For example, replacing RSS key with a symmetric hash. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Redo how Hyper-V network driver negotiates offload features. Query the host to determine offload settings, and use the result. Also: * disable IPv4 header checksum offload (not used by Linux) * enable TSO only if host supports * enable UDP checksum offload if supported * don't advertise support for checksumming of non-IP protocols * adjust GSO maximum segment size * enable HIGHDMA Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The ring buffer mapping now handles the wraparound case inside get_next_pkt_raw. Therefore it is not necessary to have an additional special receive staging buffer. See commit 1562edaed8c164ca5199 ("Drivers: hv: ring_buffer: count on wrap around mappings") Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2016 1 次提交
-
-
由 Jarod Wilson 提交于
hyperv_net: - set min/max_mtu, per Haiyang, after rndis_filter_device_add virtio_net: - set min/max_mtu - remove virtnet_change_mtu vmxnet3: - set min/max_mtu xen-netback: - min_mtu = 0, max_mtu = 65517 xen-netfront: - min_mtu = 0, max_mtu = 65535 unisys/visor: - clean up defines a little to not clash with network core or add redundat definitions CC: netdev@vger.kernel.org CC: virtualization@lists.linux-foundation.org CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: Wei Liu <wei.liu2@citrix.com> CC: Paul Durrant <paul.durrant@citrix.com> CC: David Kershner <david.kershner@unisys.com> Signed-off-by: NJarod Wilson <jarod@redhat.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2016 1 次提交
-
-
由 Stephen Hemminger 提交于
Typo's and spelling errors. Also remove old comment from staging era. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2016 3 次提交
-
-
由 Stephen Hemminger 提交于
Useful for debugging issues with multicast and SR-IOV to keep track of number of received multicast packets. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Since VF reference is now protected by RCU, no longer need the VF usage counter and can use device flags to see whether to inject or not. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The vf_netdev pointer in the netvsc device context can simply be protected by RCU because network device destruction is already RCU synchronized. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2016 3 次提交
-
-
由 Stephen Hemminger 提交于
Printing console messages is not helpful when system is out of memory; and can be disastrous with netconsole. Instead keep statistics of these anomalous conditions. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Always returns 0 and no callers check. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2016 1 次提交
-
-
由 Haiyang Zhang 提交于
The existing code uses busy retry when unable to send out receive completions due to full ring buffer. It also gives up retrying after limit is reached, and causes receive buffer slots not being recycled. This patch implements batching of receive completions. It also prevents dropping receive completions due to full ring buffer. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2016 2 次提交
-
-
由 Vitaly Kuznetsov 提交于
Here is a deadlock scenario: - netvsc_vf_up() schedules netvsc_notify_peers() work and quits. - netvsc_vf_down() runs before netvsc_notify_peers() gets executed. As it is being executed from netdev notifier chain we hold rtnl lock when we get here. - we enter while (atomic_read(&net_device_ctx->vf_use_cnt) != 0) loop and wait till netvsc_notify_peers() drops vf_use_cnt. - netvsc_notify_peers() starts on some other CPU but netdev_notify_peers() will hang on rtnl_lock(). - deadlock! Instead of introducing additional synchronization I suggest we drop gwrk.dwrk completely and call NETDEV_NOTIFY_PEERS directly. As we're acting under rtnl lock this is legitimate. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Acked-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
struct netvsc_device is not suitable for storing VF information as this structure is being destroyed on MTU change / set channel operation (see rndis_filter_device_remove()). Move all VF related stuff to struct net_device_context which is persistent. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Acked-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2016 1 次提交
-
-
由 Haiyang Zhang 提交于
On Hyper-V host 2016 and later, VMs gets an event message of the physical link speed when vSwitch is changed. This patch handles this message, so the updated link speed can be reported by ethtool. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 6月, 2016 3 次提交
-
-
由 Vitaly Kuznetsov 提交于
We unpack 'struct net_device' in netvsc_set_mac_addr() to get to 'struct hv_device' pointer which we use in rndis_filter_set_device_mac() to get back to 'struct net_device'. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
Both rndis_filter_open()/rndis_filter_close() use struct hv_device to reach to struct netvsc_device only and all callers have it already. While on it, rename net_device to nvdev in rndis_filter_open() as net_device is misleading. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
Make it easier to get 'struct netvsc_device' from 'struct net_device' and 'struct hv_device' by introducing inline helpers. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2016 3 次提交
-
-
由 Vitaly Kuznetsov 提交于
Simplify netvsvc pointer graph by getting rid of the redundant ndev pointer. We can always get a pointer to struct net_device from somewhere else. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
struct netvsc_device is destroyed on mtu change so keeping the protection flag there is not a good idea. Move it to struct net_device_context which is preserved. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2016 1 次提交
-
-
由 KY Srinivasan 提交于
Support VF drivers on Hyper-V. On Hyper-V, each VF instance presented to the guest has an associated synthetic interface that shares the MAC address with the VF instance. Typically these are bonded together to support live migration. By default, the host delivers all the incoming packets on the synthetic interface. Once the VF is up, we need to explicitly switch the data path on the host to divert traffic onto the VF interface. Even after switching the data path, broadcast and multicast packets are always delivered on the synthetic interface and these will have to be injected back onto the VF interface (if VF is up). This patch implements the necessary support in netvsc to support Linux VF drivers. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2016 1 次提交
-
-
由 Haiyang Zhang 提交于
The VRSS_CHANNEL_MAX is the max number of channels supported by Hyper-V hosts. We use it for the related array sizes instead of using NR_CPUS, which may be set to several thousands. This patch reduces possible memory allocation failures. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2016 1 次提交
-
-
由 sixiao@microsoft.com 提交于
This patch allows the user to set and retrieve speed and duplex of the hv_netvsc device via ethtool. Example: $ ethtool eth0 Settings for eth0: ... Speed: Unknown! Duplex: Unknown! (255) ... $ ethtool -s eth0 speed 1000 duplex full $ ethtool eth0 Settings for eth0: ... Speed: 1000Mb/s Duplex: Full ... This is based on patches by Roopa Prabhu and Nikolay Aleksandrov. Signed-off-by: NSimon Xiao <sixiao@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2016 1 次提交
-
-
由 Haiyang Zhang 提交于
Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2015 12 次提交
-
-
由 KY Srinivasan 提交于
Eliminate vlan_tci from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate status from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate xmit_more from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate completion_func from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate is_data_pkt from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate send_completion_tid from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate page_buf from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
Packet scheduler guarantees there won't be multiple senders for the same queue and as we use q_idx for multi_send_data the spinlock is redundant. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitaly Kuznetsov 提交于
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
The rndis header is 116 bytes big and can be placed in the default head room that will be available in the skb. Since the netvsc packet is less than 48 bytes, we can use the skb control buffer for the netvsc packet. With these changes we don't need to ask for additional head room. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate send_completion_ctx from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KY Srinivasan 提交于
Eliminate send_completion from struct hv_netvsc_packet. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-