- 22 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Fix the comparison of unsigned int that causes a compile warning below by changing to the right signed type: patch_sigmatel.c: In function ‘stac92xx_vref_set’: patch_sigmatel.c:658: warning: comparison of unsigned expression < 0 is always false Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 6月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Add the new model string corresponding to the previous Acer Aspire 6530G support. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
The selected 4930G model seemed to keep the subwoofer 'tuba' function from operating correctly. Removing the existing PCI ID match made this work again, but it was mapped to 'Side' instead of to LFE as one would expect. This attempts to enable all functionality and keep the amount of available mixer sliders low. Any slider that had no audible effect on the output audio has been removed, and as such EAPD is not currently enabled. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 6月, 2009 4 次提交
-
-
由 Sasha Alexandr 提交于
Correct some trivial typos in comments. Signed-off-by: NSasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Alexandr 提交于
Correct some cut+paste typos from 'tagra' to 'targa'. Signed-off-by: NSasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Alexandr 提交于
Add pci-quirk for MSI MS-7350 motherboard with Realtek ALC888. Signed-off-by: NSasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The codec->modelname field is allocated twice in snd_hda_codec_new(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added model=acer-aspire-8930g for Acer Aspire 6935G (1025:0146). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 6月, 2009 1 次提交
-
-
由 Simos Xenitellis 提交于
A quirk is required for 8086:284b (rev 03) [Subsystem: 161f:2073]. The following has been tested with Alsa 1.0.20 (git master). Background details can be found at https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4561 http://forum.ubuntu-gr.org/viewtopic.php?f=38&t=5290Tested-by: NTheodora Iliopoulou <th30dr@gmail.com> Signed-off-by: NSimos Xenitellis <simos@gnome.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 6月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
- Fix a typo in the patch - Adapted to follow the recent change for unsol event handling Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Heidelberger 提交于
Added 7.1 support for MSI GX620 and jack quirk. Reference: kernel bug#13430 http://bugzilla.kernel.org/show_bug.cgi?id=13430Signed-off-by: NDavid Heidelberger <d.okias@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 6月, 2009 1 次提交
-
-
由 Guido Günther 提交于
with BIOS probing only we offer a non functional headphone swith and volume slider. Signed-off-by: NGuido Günther <agx@sigxcpu.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 6月, 2009 2 次提交
-
-
由 Alexander Beregalov 提交于
Fix this build error when CONFIG_PM is not set: ound/pci/hda/hda_intel.c: In function 'azx_bus_reset': sound/pci/hda/hda_intel.c:1270: error: implicit declaration of function 'snd_pcm_suspend_all' sound/pci/hda/hda_intel.c:1271: error: implicit declaration of function 'snd_hda_suspend' sound/pci/hda/hda_intel.c:1272: error: implicit declaration of function 'snd_hda_resume' Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hector Martin 提交于
Enable all three capture channels, including the missing nid 7 which is the only one capable of capturing DMIC input Enable Headphone amp for the HP jack. This causes a volume boost for headphones, but does not cause any noticeable effect for light loads like other amps, so there is no need to make it configurable. Add Input Mix capture mux setting to capture the output of the playback input mux (that is, what goes out the speakers except for PCM) Hack another coef register because the stereo DMIC for some reason produces a nonstandard sum/difference signal. I found a bit to make it just use the sum signal for both channels, which makes it behave like a standard mono microphone. The stereo is useless anyway (they're 1cm apart). Tested working: Three capture channels, mic in, line in, DMIC. Tested not working: CD. Not sure why, might be unconnected in the actual hardware or a CD drive issue. Also looked at SPDIF. It appears to work (emitter lights up inside the HP out jack) but I lack a proper miniTOSLINK cable to test it. Signed-off-by: NHector Martin <hector@marcansoft.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 6月, 2009 8 次提交
-
-
由 Takashi Iwai 提交于
-
由 Hector Martin 提交于
Short story: this laptop has 5.1 built-in speakers which you *really* want to use (the not-so-"sub" woofer is what makes the audio above average for a laptop), so 6-channel support is important (plus a decent asound.conf to upmix stereo). It also has the 3 typical jacks that ought to have a selectable mode. And it's based on ALC889, which sucks. Rationale/explanations: The const_channel_count stuff was added because, for a laptop like this, you always have 6 channels available (internal speakers) but still need to set the mode for the 3 external jacks. Therefore, the device always needs to be in 6-channel mode but there still needs to be a mixer control for the jack mode. You could use line/mic-in at the same time as the 6 internal speakers, for example. You might be tempted to make it even smarter by dynamically switching the max channel count when headphones are plugged in (therefore muting the internal speakers and reducing the physical channel count to the jack channel mode), but as a user I consider this to be harmful because I want the audio to blow up to 6 channels / upmixed as soon as I unplug the headphones, and having opened the device while in 2-channel mode would prevent this from working (and always making 6-channel mode available doesn't do any harm). The hardware needs EAPD turned on and the DACs routed to the internal speaker pins, so the patch adds those verbs. The ALC889 CLFE and subsequent (side/aux, here unused) DACs do NOT work by default, at least here. I wasted much time trying to talk to Realtek/pshou about this, but they just kept sending me useless updates to patch_realtek.c that did nothing relevant. In the end I gave up and brute forced the issue by trying to flip every bit in the proprietary coefficient registers, and eventually found the two magic registers that need to be cleared to enable all DACs. I have only heard Acer users complain, but that might be because ALC889 is pretty new and using 5.1 (and noticing the missing center/lfe channels) might not be that common. If this is a generalized issue with all ALC889 systems then those verbs should probably be moved to a common verb array. The internal mic is untested and probably doesn't work. These settings will probably work for other Acer Gemstone laptops with the same 5.1 speaker config. When identified, those should be added to the PCI subsystem ID list. Signed-off-by: NHector Martin <hector@marcansoft.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The reset of a BUS controller during operations is somehow risky and shouldn't be done inevitably for devices that have apparently no such codec-communication problems. This patch adds the check of the hardware and limits the bus-reset capability. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some machines machine cause a severe CORB/RIRB stall in certain weird conditions, such as PA access at the start up together with fglrx driver. This seems unable to be recovered without the controller reset. This patch allows the bus controller reset at critical errors so that the communication gets recovered again. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Rearrange alc268_cfg_tbl[] in the order of vendor id, and group some entries using SND_PCI_QUIRK_MASK(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ozan Çağlayan 提交于
Currently, LG R510 is only able to produce sound on headphones, the internal speakers are not working. The user tested and confirmed that with model=Dell headphones, internal speakers and the microphone are working flawlessly. Tested-by: NSerdar Soytetir <tulliana@gmail.com> Signed-off-by: NOzan Çağlayan <ozan@pardus.org.tr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kacper Szczesniak 提交于
this is a patch against current snapshot that adds: 6 channels support for the MB5 model Signed-off-by: NKacper Szczesniak <kacper@qwe.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Fix issues for 3 generations of HP workstations. The modest modifications do the following: 1. Change the second MIC from device 3 to device 1 2. Init the "boost" values to "0" by default From: John Brown <john.brown3@hp.com> Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 6月, 2009 2 次提交
-
-
由 Nickolas Lloyd 提交于
This patch changes Line In as Out Switch and Mic In as Out Switch to enums for consistency, and causes all mic and line in ports to be probed and controls to be added appropriately. Signed-off-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wei Ni 提交于
Support 8 channel HDMI audio for MCP78/7A Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
ICH6_GCTL_RESET was wrongly set to another bit by the commit b21fadb9. This caused a problem when the codec needs really a reset (e.g. recovering from the communication error at probe). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The commit 86d190e7 reverted the bit flip of LED GPIO for HP DX and DV4-1222nr. Fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 5月, 2009 4 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Added some missing register bits definitions to reduce magic numbers. Also renamed some to follow the names on the datasheet. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the single_cmd mode, the hardware cannot store the multiple replies like on RIRB, thus each verb has to sync and wait for the response no matter whether the return value is needed or not. Otherwise it may result in a wrong return value from the previous verb. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
A docking mic control is shown by default. The Compaq Presario CQ60 laptop has no docking connector, so designate it as a CXT5051_HP model. This makes the phantom mixer slider disappear. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 5月, 2009 5 次提交
-
-
由 Takashi Iwai 提交于
This patch adds a debug mode to make the codec communication synchronous. Define SND_HDA_SUPPORT_SYNC_WRITE in hda_codec.c, and the call of snd_hda_codec_write*() will become synchronous, i.e. wait for the reply from the codec at each time issuing a verb. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the single_cmd mode, the current driver code doesn't do any update for RIRB just for any safety reason. But, actually the RIRB and single_cmd mode don't conflict. Unsolicited events can be delivered even while using the single_cmd mode. This patch allows the handling of unsolicited events with single_cmd mode, just always checking RIRB independent from single_cmd flag. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
- Remove unneeded semicolons - Introduce spec->gpio_led to specify the GPIO bit for LED control Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When a codec communication error occurs, the CORB/RIRB counters should be reset first before re-issuing the verb. Simply call azx_free_cmd_io() and azx_init_cmd_io() to achieve that. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 5月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
Some Realtek codecs like ALC861 seem to support only VREF50 while the current driver assumes it's only VREF80. Check other VREF bits to set the correct value. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ozan Çağlayan 提交于
ASUS W5Fm needs the fixed codec-slots to probe to override the BIOS problem like W5F. Tested-by: NAlp Kılıç <kilic.alp@gmail.com> Signed-off-by: NOzan Çağlayan <ozan@pardus.org.tr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 5月, 2009 1 次提交
-
-
由 Adam Williamson 提交于
Fixes https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4121 Taken from https://bugzilla.redhat.com/show_bug.cgi?id=498060Signed-off-by: NAdam Williamson <awilliam@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The digital beep tone is calculated in two different ways depending on the codec chip. The standard one is using a divider, and another one is a linear tone for IDT/STAC codecs. Currently, only the latter type is used for all codecs, which resulted in a wrong tone pitch. This patch adds the calculation of the standard HD-audio type. Also clean-up the fields in hda_beep struct. Reference: bko#13162 http://bugzilla.kernel.org/show_bug.cgi?id=13162Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-