Add pcie_bandwidth_capable() to compute the max link bandwidth supported by
a device, based on the max link speed and width, adjusted by the encoding
overhead.

The maximum bandwidth of the link is computed as:

  max_link_width * max_link_speed * (1 - encoding_overhead)

2.5 and 5.0 GT/s links use 8b/10b encoding, which reduces the raw bandwidth
available by 20%; 8.0 GT/s and faster links use 128b/130b encoding, which
reduces it by about 1.5%.

The result is in Mb/s, i.e., megabits/second, of raw bandwidth.
Signed-off-by: NTal Gilboa <talgi@mellanox.com>
[bhelgaas: add 16 GT/s, adjust for pcie_get_speed_cap() and
pcie_get_width_cap() signatures, don't export outside drivers/pci]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add pcie_get_width_cap() to find the max link width supported by a device.
Change max_link_width_show() to use pcie_get_width_cap().
Signed-off-by: NTal Gilboa <talgi@mellanox.com>
[bhelgaas: return width directly instead of error and *width, don't export
outside drivers/pci]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>

Add pcie_get_speed_cap() to find the max link speed supported by a device.
Change max_link_speed_show() to use pcie_get_speed_cap().
Signed-off-by: NTal Gilboa <talgi@mellanox.com>
[bhelgaas: return speed directly instead of error and *speed, don't export
outside drivers/pci]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>

PCIe 4.0 defines the 16.0 GT/s link speed.  Links can run at that speed
without any Linux changes, but previously their sysfs "max_link_speed" and
"current_link_speed" files contained "Unknown speed", not the expected
"16.0 GT/s".

Add decoding for the new 16 GT/s link speed.
Signed-off-by: NJay Fang <f.fangjian@huawei.com>
[bhelgaas: add PCI_EXP_LNKCAP2_SLS_16_0GB]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NDongdong Liu <liudongdong3@huawei.com>

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It adds support for new Mellanox system types of basic classes qmb7, sn34,
sn37, containing systems QMB700 (40x200GbE InfiniBand switch), SN3700
(32x200GbE and 16x400GbE Ethernet switch) and SN3410 (6x400GbE plus
48x50GbE Ethernet switch). These are the Top of the Rack systems, equipped
with Mellanox COM-Express carrier board and switch board with Mellanox
Quantum device, which supports InfiniBand switching with 40X200G ports and
line rate of up to HDR speed or with Mellanox Spectrum-2 device, which
supports Ethernet switching with 32X200G ports line rate of up to HDR
speed.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

It adds support for new Mellanox system types of basic half unit size
class msn201x, containing system MSN2010 (18x10GbE plus 4x4x25GbE) half
and its derivatives. This is the Top of the Rack system, equipped with
Mellanox Small Form Factor carrier board and switch board with Mellanox
Spectrum device, which supports Ethernet switching with 32X100G ports line
rate of up to EDR speed.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

It adds support for new Mellanox system types of basic class msn274x,
containing system MSN2740 (32x100GbE Ethernet switch with cost reduction)
and its derivatives. These are the Top of the Rack system, equipped with
Mellanox Small Form Factor carrier board and switch board with Mellanox
Spectrum device, which supports Ethernet switching with 32X100G ports line
rate of up to EDR speed.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

Having these checks in ibmvnic_xmit causes problems with VLAN
tagging and balance-alb/tlb bonding modes. The restriction they
imposed can be removed.
Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For a memory range/skb where the last byte falls onto a page boundary
(ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the
calculation currently doesn't round up to the next PFN due to an
off-by-one error.
Thus qeth believes that the skb occupies one page less than it
actually does, and may select a IO buffer that doesn't have enough spare
buffer elements to fit all of the skb's data.
HW detects this as a malformed buffer descriptor, and raises an
exception which then triggers device recovery.

Fixes: 2863c613 ("qeth: refactor calculation of SBALE count")
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For dwmac4, GMAC_INT_DEFAULT_ENABLE already includes
GMAC_INT_PMT_EN, so it is redundant to check if hw->pmt
is set, and if so, setting the bit again.

For dwmac1000, GMAC_INT_DEFAULT_MASK does not include
GMAC_INT_DISABLE_PMT, so it is redundant to check if
hw->pmt is set, and if so, clearing an already cleared bit.

Improve code readability by removing this redundant code.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GMAC_INT_DEFAULT_MASK is written to the interrupt enable register.
In previous versions of the IP (e.g. dwmac1000), this register was
instead an interrupt mask register.
To improve clarity and reflect reality, rename GMAC_INT_DEFAULT_MASK
to GMAC_INT_DEFAULT_ENABLE.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The interrupt status register in both dwmac1000 and dwmac4 ignores
interrupt enable (for dwmac4) / interrupt mask (for dwmac1000).
Therefore, if we want to check only the bits that can actually trigger
an irq, we have to filter the interrupt status register manually.

Commit 0a764db1 ("stmmac: Discard masked flags in interrupt status
register") fixed this for dwmac1000. Fix the same issue for dwmac4.

Just like commit 0a764db1 ("stmmac: Discard masked flags in
interrupt status register"), this makes sure that we do not get
spurious link up/link down prints.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When allocating RX or TX buffer pools, the driver needs to provide a
unique mapping ID to firmware for each pool. This value is assigned
using a counter which is incremented after a new pool is created. The
ID can be an integer ranging from 1-255. When migrating to a device
that requests a different number of queues, this value was not being
reset properly. As a result, after enough migrations, the counter
exceeded the upper bound and pool creation failed. This is fixed by
resetting the counter to one in this case.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The omapfb driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it
relies on the <linux/pinctrl/consumer.h> and <linux/seq_file.h>
being pulled in by the <linux/device.h> header implicitly.

Include these headers explicitly to avoid the build failures.

Fixes: 23c35f48 ("pinctrl: remove include file from <linux/device.h>")
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NTony Lindgren <tony@atomide.com>
[b.zolnierkie: fix include order and patch description]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Add dedicated structure with power cable setting for Mellanox msn21xx
family. These systems do not have a physical device for the power unit
controller. When the power cable is inserted or removed, the relevant
interrupt signal is handled, the status is updated, but no device is
associated with the signal.

Add definition for interrupt low aggregation signal. On system from
msn21xx family, low aggregation mask should be removed in order to allow
signal to hit CPU.

Fixes: 6613d18e ("platform/x86: mlx-platform: Move module from arch/x86")
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

Add define for the negative bus ID in order to use it in case no hotplug
device is associated with the hotplug interrupt signal. In this case,
the signal will be handled by the mlxreg-hotplug driver, but no device
will be associated with the signal.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

Add defines for the bus IDs, used for hotplug device topology to improve
code readability. Defines added for FAN and power units.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

With gcc-4.1.2:

    drivers/platform/mellanox/mlxreg-hotplug.c: In function ‘mlxreg_hotplug_health_work_helper’:
    drivers/platform/mellanox/mlxreg-hotplug.c:347: warning: ‘ret’ is used uninitialized in this function

Indeed, if mlxreg_core_item.count is zero, ret is used uninitialized.

While this is unlikely to happen (it is set to ARRAY_SIZE(...) in x86
board files), this is done in another source file, so fix this by
preinitializing ret to zero.

Fixes: c6acad68 ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added
long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates
also PHY state changes and we should do what the symbol says.

Fixes: 84a527a4 ("net: phylib: fix interrupts re-enablement in phy_start")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Cavium thunder nicvf driver supports rx/tx rings of up to 65536 entries per.
The number of entires are stored in the q_len member of struct q_desc_mem. The
problem is that q_len being a u16, results in 65536 becoming 0.

In getting pointers to descriptors in the rings, the driver uses q_len minus 1
as a mask after incrementing the pointer, in order to go back to the beginning
and not go past the end of the ring.

With the q_len set to 0 the mask is no longer correct and the driver does go
beyond the end of the ring, causing various ills. Usually the first thing that
shows up is a "NETDEV WATCHDOG: enP2p1s0f1 (nicvf): transmit queue 7 timed out"
warning.

This patch remedies the problem by changing q_len to a u32.
Signed-off-by: NDean Nelson <dnelson@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While handling a driver reset we get a H_CLOSED return trying
to send a CRQ event. When this occurs we need to queue up another
reset attempt. Without doing this we see instances where the driver
is left in a closed state because the reset failed and there is no
further attempts to reset the driver.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add suffix ULL to constants 272, 204, 136 and 68 in order to give the
compiler complete information about the proper arithmetic to use.
Notice that these constants are used in contexts that expect
expressions of type unsigned long long (64 bits, unsigned).

The following expressions are currently being evaluated using 32-bit
arithmetic:

272 * mult
204 * mult
136 * mult
68 * mult

Addresses-Coverity-ID: 201058
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using devmap to redirect packets between interfaces,
xdp_do_flush() is usually a must to flush any batched
packets. Unfortunately this is missed in current tuntap
implementation.

Unlike most hardware driver which did XDP inside NAPI loop and call
xdp_do_flush() at then end of each round of poll. TAP did it in the
context of process e.g tun_get_user(). So fix this by count the
pending redirected packets and flush when it exceeds NAPI_POLL_WEIGHT
or MSG_MORE was cleared by sendmsg() caller.

With this fix, xdp_redirect_map works again between two TAPs.

Fixes: 761876c8 ("tap: XDP support")
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DKMS and similar out-of-tree module replacement services use
module version to make sure the out-of-tree software is not
older than the module shipped with the kernel.  We use the
kernel version in ethtool -i output, put it into MODULE_VERSION
as well.
Reported-by: NJan Gutter <jan.gutter@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most FWs limit the number of TSO segments a frame can produce
to 64.  This is for fairness and efficiency (of FW datapath)
reasons.  If a frame with larger number of segments is submitted
the FW will drop it.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All netdevs which can accept TC offloads must implement
.ndo_set_features().  nfp_reprs currently do not do that, which
means hw-tc-offload can be turned on and off even when offloads
are active.

Whether the offloads are active is really a question to nfp_ports,
so remove the per-app tc_busy callback indirection thing, and
simply count the number of offloaded items in nfp_port structure.

Fixes: 8a276873 ("nfp: provide infrastructure for offloading flower based TC filters")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Tested-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

nfp_port is a structure which represents an ASIC port, both
PCIe vNIC (on a PF or a VF) or the external MAC port.  vNIC
netdev (struct nfp_net) and pure representor netdev (struct
nfp_repr) both have a pointer to this structure.  nfp_reprs
always have a port associated.  nfp_nets, however, only represent
a device port in legacy mode, where they are considered the
MAC port. In switchdev mode they are just the CPU's side of
the PCIe link.

By definition TC offloads only apply to device ports.  Don't
set the flag on vNICs without a port (i.e. in switchdev mode).
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Tested-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upcoming changes will require all netdevs supporting TC offloads
to have a full struct nfp_port.  Require those for BPF offload.
The operation without management FW reporting information about
Ethernet ports is something we only support for very old and very
basic NIC firmwares anyway.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Tested-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 9ed4f916.

The commit introduced a regression that over read the ie with
the padding.

- the expected IE information

ath10k_pci 0000:03:00.0: found firmware features ie (1 B)
ath10k_pci 0000:03:00.0: Enabling feature bit: 6
ath10k_pci 0000:03:00.0: Enabling feature bit: 7
ath10k_pci 0000:03:00.0: features
ath10k_pci 0000:03:00.0: 00000000: c0 00 00 00 00 00 00 00

- the wrong IE with padding is read (0x77)

ath10k_pci 0000:03:00.0: found firmware features ie (4 B)
ath10k_pci 0000:03:00.0: Enabling feature bit: 6
ath10k_pci 0000:03:00.0: Enabling feature bit: 7
ath10k_pci 0000:03:00.0: Enabling feature bit: 8
ath10k_pci 0000:03:00.0: Enabling feature bit: 9
ath10k_pci 0000:03:00.0: Enabling feature bit: 10
ath10k_pci 0000:03:00.0: Enabling feature bit: 12
ath10k_pci 0000:03:00.0: Enabling feature bit: 13
ath10k_pci 0000:03:00.0: Enabling feature bit: 14
ath10k_pci 0000:03:00.0: Enabling feature bit: 16
ath10k_pci 0000:03:00.0: Enabling feature bit: 17
ath10k_pci 0000:03:00.0: Enabling feature bit: 18
ath10k_pci 0000:03:00.0: features
ath10k_pci 0000:03:00.0: 00000000: c0 77 07 00 00 00 00 00
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Signed-off-by: NRyan Hsu <ryanhsu@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Immed relocation is missing a shift which means for larger
offsets the lower and higher part of the address would be
ORed together.

Fixes: ce4ebfd8 ("nfp: bpf: add helpers for updating immediate instructions")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NJiong Wang <jiong.wang@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Without this, the imx6q-cpufreq driver isn't loaded
automatically when built as a module

Tested on wandboard quad with a fedora 27 kernel rpm
Signed-off-by: NNicolas Chauvet <kwizart@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pointer subtraction is slow and tedious. Therefore, replace all instances
where cpufreq_for_each_{valid_,}entry loops contained such substractions
with an iteration macro providing an index to the frequency_table entry.
Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/r/20180120020237.GM13338@ZenIV.linux.org.ukAcked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When maxcpus=1 is in the kernel command line, the BP is responsible
for re-enabling the HWP - because currently only the APs invoke
intel_pstate_hwp_enable() during their online process - which might
put the system into unstable state after resume.

Fix this by enabling the HWP explicitly on BP during resume.
Reported-by: NDoug Smythies <dsmythies@telus.net>
Suggested-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NYu Chen <yu.c.chen@intel.com>
[ rjw: Subject/changelog, minor modifications ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix to return a negative error code from the clk_get() error handling
case instead of 0, as done elsewhere in this function.

Fixes: 343a8d17 (cpufreq: scpi: remove arm_big_little dependency)
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There's no need to be printing a raw kernel pointer to the kernel log at
every boot.  So just remove it, and change the whole message to use the
correct dev_info() call at the same time.
Reported-by: NWang Qize <wang_qize@venustech.com.cn>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It was discovered that simple program which indefinitely sends 200b UDP
packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network
watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog
timeout is triggered due to race between cpsw_ndo_start_xmit() and
cpsw_tx_handler() [NAPI]

cpsw_ndo_start_xmit()
	if (unlikely(!cpdma_check_free_tx_desc(txch))) {
		txq = netdev_get_tx_queue(ndev, q_idx);
		netif_tx_stop_queue(txq);

^^ as per [1] barier has to be used after set_bit() otherwise new value
might not be visible to other cpus
	}

cpsw_tx_handler()
	if (unlikely(netif_tx_queue_stopped(txq)))
		netif_tx_wake_queue(txq);

and when it happens ndev TX queue became disabled forever while driver's HW
TX queue is empty.

Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue()
calls and double check for free TX descriptors after stopping ndev TX queue
- if there are free TX descriptors wake up ndev TX queue.

[1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.htmlSigned-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change will guard against a double free in the case that the
buffers were previously freed at some other time, such as during
a device reset. It resolves a kernel oops that occurred when changing
the VNIC device's MTU.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At some point, a check was added to exit the polling routine during resets.
This makes sense for most reset conditions, but for a non-fatal error, we
expect the polling routine to continue running to properly clean up the rx
queues. This patch checks if we are performing a non-fatal reset and if we
are, continues normal polling operation.
Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>