Memory allocated by kvzalloc should not be freed by kfree(), use kvfree()
instead.

Fixes: 813e90b1 ("IB/mlx5: Add advise_mr() support")
Link: https://lore.kernel.org/r/20190717082101.14196-1-hslester96@gmail.comSigned-off-by: NChuhong Yuan <hslester96@gmail.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A GID entry consists of GID, vlan, netdev and smac.  Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv6 VLAN based
link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to
hold gid and vlan_id information.

The issue is discussed in the following thread
https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com

Fixes: 823b23da ("IB/core: Allow vlan link local address based RoCE GIDs")
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.comReported-by: NYi Zhang <yi.zhang@redhat.com>
Co-developed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Tested-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When a TID sequence error occurs while receiving TID RDMA READ RESP
packets, all packets after flow->flow_state.r_next_psn should be dropped,
including those response packets for subsequent segments.

The current implementation will drop the subsequent response packets for
the segment to complete next, but may accept packets for subsequent
segments and therefore mistakenly advance the r_next_psn fields for the
corresponding software flows. This may result in failures to complete
subsequent segments after the current segment is completed.

The fix is to only use the flow pointed by req->clear_tail for checking
KDETH PSN instead of finding a flow from the request's flow array.

Fixes: b885d5be ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.comReviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The field flow->resync_npkts is added for TID RDMA WRITE request and
zero-ed when a TID RDMA WRITE RESP packet is received by the requester.
This field is used to rewind a request during retry in the function
hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA
READ requests. Therefore, when a TID RDMA READ request is retried, this
field may not be initialized at all, which causes the retry to start at an
incorrect psn, leading to the drop of the retry request by the responder.

This patch fixes the problem by zeroing out the field when the flow memory
is allocated.

Fixes: 838b6fd2 ("IB/hfi1: TID RDMA RcvArray programming and TID allocation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.comReviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When an OPFN request is flushed, the request is completed without
unreserving itself from the send queue. Subsequently, when a new
request is post sent, the following warning will be triggered:

WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt]
Call Trace:
[<ffffffffbbb61e41>] dump_stack+0x19/0x1b
[<ffffffffbb497688>] __warn+0xd8/0x100
[<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20
[<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt]
[<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0
[<ffffffffbb61d645>] ? __kmalloc+0x55/0x230
[<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs]
[<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs]
[<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs]
[<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0
[<ffffffffbb641650>] vfs_write+0xc0/0x1f0
[<ffffffffbb64246f>] SyS_write+0x7f/0xf0
[<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27

This patch fixes the problem by moving rvt_qp_wqe_unreserve() into
rvt_qp_complete_swqe() to simplify the code and make it less
error-prone.

Fixes: ca95f802 ("IB/hfi1: Unreserve a reserved request when it is completed")
Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The call to alloc_rsm_map_table does not check if the kmalloc fails.
Check for a NULL on alloc, and bail if it fails.

Fixes: 372cc85a ("IB/hfi1: Extract RSM map table init from QOS")
Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When run perftest in many times, the system will report a BUG as follows:

   BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1
   BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1

We tested with different kernel version and found it started from the the
following commit:

commit d10bcf94 ("RDMA/umem: Combine contiguous PAGE_SIZE regions in
SGEs")

In this commit, the sg->offset is always 0 when sg_set_page() is called in
ib_umem_get() and the drivers are not allowed to change the sgl, otherwise
it will get bad page descriptor when unfolding SGEs in __ib_umem_release()
as sg_page_count() will get wrong result while sgl->offset is not 0.

However, there is a weird sgl usage in the current hns driver, the driver
modified sg->offset after calling ib_umem_get(), which caused we iterate
past the wrong number of pages in for_each_sg_page iterator.

This patch fixes it by correcting the non-standard sgl usage found in the
hns_roce_db_map_user() function.

Fixes: d10bcf94 ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Fixes: 0425e3e6 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable RDMA DIM by default for better user experience.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.

Only if the FW supports both modes should userspace be told the tag
matching capability is available.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb761894 ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This mechanism will allow function-A to perform operations "on behalf" of
function-B via tunnel object. Function-A will have privileges for creating
and using this tunnel object.

For example, in the device emulation feature presented in Bluefield-1 SoC,
using device emulation capability, one can present NVMe function to the
host OS.

Since the NVMe function doesn't have a normal command interface to the HCA
HW, here is a need to create a channel that will be able to issue commands
"on behalf" of this function.

This channel is the VHCA_TUNNEL general object. The emulation software
will create this tunnel for every managed function and issue commands via
devx general cmd interface using the appropriate tunnel ID. When devX
context will receive a command with non-zero vhca_tunnel_id, it will pass
the command as-is down to the HCA.

All the validation, security and resource tracking of the commands and the
created tunneled objects is in the responsibility of the HCA FW. When a
VHCA_TUNNEL object destroyed, the device will issue an internal
FLR (function level reset) to the emulated function associated with this
tunnel. This will destroy all the created resources using the tunnel
mechanism.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Here Clean up unnecessary initial value for some variable.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When smmu is enable, if execute the perftest command and then use 'kill
-9' to exit, follow this operation repeatedly, the kernel will have a high
probability to print the following smmu event:

  arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the
next reset.

This patch fixed it by removing the action that release qpc memory in the
'hns_roce_qp_free' function.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The format specifier \"%p\" can leak kernel addresses.  Use \"%pK\"
instead.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The buffer size of qp which used to allocate qp buffer space for storing
sqwqe and rqwqe will be the length of buffer space. The kernel driver will
use the buffer address and the same size to get the user memory. The same
size named buff_size of qp. According the algorithm of calculating, The
size of the two is not equal when users set the max sge of sq.

Fixes: b28ca7cc ("RDMA/hns: Limit extend sq sge num")
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When hw resetting, there is no response from hw when driver sending cmdq.
If driver still send cmdq to hw, the reset process may be blocked.  So
reset flag should be set to intercept the cmdq command when driver
receiving "notify down" signal.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the depth of cq only supports 64K.  According to the UM, the
depth of cq is up to 4M, Therefore the ba page size of cqe was modified to
support the maximum specification of cq depth.
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Hip06 reserve 12 qps, Hip08 reserve 8 qps. When the QP is released, the
chip model is not judged, and the Hip08 cannot release the qpn 8~12
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It uses hns_roce_mtr_init in hns_roce_create_qp_common function.  As a
result, it should use hns_roce_mtr_cleanup function for cleaning mtr when
destroying qp.

Fixes: 8d18ad83 ("RDMA/hns: Fix bug when wqe num is larger than 16K")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for ib callback counter_alloc_stats() and
counter_update_stats().
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for ib callbacks counter_bind_qp(), counter_unbind_qp() and
counter_dealloc().
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add counter set id as a parameter so that this API can be used for
querying any q counter.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Support bind a qp with counter. If counter is null then bind the qp to the
default counter. Different QP state has different operation:

- RESET: Set the counter field so that it will take effective during
  RST2INIT change;
- RTS: Issue an RTS2RTS change to update the QP counter;
- Other: Set the counter field and mark the counter_pending flag, when QP
  is moved to RTS state and this flag is set, then issue an RTS2RTS
  modification to update the counter.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Convert the qib_fs/ipathfs filesystem to the new internal mount API as the
old one will be obsoleted and removed.  This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.

See Documentation/filesystems/mount_api.txt for more information.

[Q] Can qib_remove() race with qibfs_kill_super()?  Should qib_super
    accesses be serialised with some sort of lock?
[A] yes, it can and no, that's not the right solution.  See vfs.git #qibfs
    for an old attempt to handle that cleanly.  Infiniband folks were not
    interested...
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
cc: linux-rdma@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make admin commands id easier to distinguish by using relevant bits from
the producer counter.
This allows us to differentiate admin commands with the same producer
index (happens after admin queue overlap), which is helpful when
debugging.
Signed-off-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need in custom memory zeroing, because it can be done
by using kzalloc from the beginning.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The patch below wasn't fully tested for all combinations of module and
configs, and causes a compile failure:

WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_ah.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_alloc.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cmd.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cq.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_db.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_hem.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_mr.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_pd.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_qp.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_restrack.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_srq.o
see include/linux/module.h for more information
ERROR: "hns_roce_bitmap_cleanup" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_bitmap_init" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_free_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_alloc_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_table_get" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_bitmap_alloc" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_table_find" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!

The fix is to put the module sub components in the right line.

Fixes: e9816ddf ("RDMA/hns: Cleanup unnecessary exported symbols")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

No need any more to hold mlx5_core_dev on the devx_object, it can be
accessed from ib_dev.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add DEVX support for CQ events by creating and destroying the CQ via
mlx5_core and set an handler to manage its completions.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Implement DEVX dispatching event by looking up for the applicable
subscriptions for the reported event and using their target fd to
signal/set the event.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable subscription for device events over DEVX.

Each subscription is added to the two level xarray data structure
according to its event number and the DEVX object information in case was
given with the given target fd.

Those events will be reported over the given fd once will occur.
Downstream patches will mange the dispatching to any subscription.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Register DEVX with with mlx5_core to get async events.  This will enable
to dispatch the applicable events to its consumers in down stream patches.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FD and its initial
implementation.

This object is from type class FD and will be used to read DEVX
async events.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports().
mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF
vports as well.
Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to
more generic vport.h header file. Such exposure is not desired.
Hence a mlx5_eswitch_get_total_vports() is introduced.

Given that mlx5_eswitch_get_total_vports() API wants to work on const
mlx5_core_dev*, change its helper functions also to accept const *dev.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently during dual port IB device registration in below code flow,

ib_register_device()
  ib_device_register_sysfs()
    ib_setup_port_attrs()
      add_port()
        get_counter_table()
          get_perf_mad()
            process_mad()
              mlx5_ib_process_mad()

mlx5_ib_process_mad() fails on 2nd port when both the ports are not fully
setup at the device level (because 2nd port is unaffiliated).

As a result, get_perf_mad() registers different PMA counter group for 1st
and 2nd port, namely pma_counter_ext and pma_counter. However both ports
have the same capability and counter offsets.

Due to this when counters are read by the user via sysfs in below code
flow, counters are queried from wrong location from the device mainly from
PPCNT instead of VPORT counters.

show_pma_counter()
  get_perf_mad()
    process_mad()
      mlx5_ib_process_mad()
        process_pma_cmd()

This shows all zero counters for 2nd port.

To overcome this, process_pma_cmd() is invoked, and when unaffiliated port
is not yet setup during device registration phase, make the query on the
first port.  while at it, only process_pma_cmd() needs to work on the
native port number and underlying mdev, so shift the get, put calls to
where its needed inside process_pma_cmd().

Fixes: 212f2a87 ("IB/mlx5: Route MADs for dual port RoCE")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Report EQE data upon CQ completion to let upper layers use this data.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Enhance mlx5_core_create_cq() to get the command out buffer from the
callers to let them use the output.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Use the reported device capabilities for the supported user events (i.e.
affiliated and un-affiliated) to set the EQ mask.

As the event mask can be up to 256 defined by 4 entries of u64 change
the applicable code to work accordingly.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning:
 variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The API for ib_query_qp requires the driver to set qp_state and
cur_qp_state on return, add the missing sets.

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Signed-off-by: NChangcheng Liu <changcheng.liu@aliyun.com>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use kmemdump instead of kzmalloc + memcpy.
Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>