This is a preparation patch which removes the nvme common command cdw10
array and replace with individual fields. This is needed for the nvmet
error log page implementation make is error log page entry offset
assignment easier.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in nvme. If we fail allocating the special page, we
return busy, and it'll get retried. But since ordering is honored for
dispatch requests, we can keep retrying this same IO and failing. Behind
that IO could be requests that want to free memory, but they never get
the chance.

Allocate a fixed discard page per controller for a safe fallback, and use
that if the initial allocation fails.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add __exit annotation to cleanup helper which is only
called once in the module.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch implements the NVMe over TCP host driver. It can be used to
connect to remote NVMe over Fabrics subsystems over good old TCP/IP.

The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.

To connect to all NVMe over Fabrics controllers reachable on a given taget
port over TCP use the following command:

	nvme connect-all -t tcp -a $IPADDR

This requires the latest version of nvme-cli with TCP support.
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NRoy Shterman <roys@lightbitslabs.com>
Signed-off-by: NSolganik Alexander <sashas@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch implements the TCP transport driver for the NVMe over Fabrics
target stack. This allows exporting NVMe over Fabrics functionality over
good old TCP/IP.

The driver implements the TP 8000 of how nvme over fabrics capsules and
data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte
stream. nvme-tcp header and data digest are supported as well.
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NRoy Shterman <roys@lightbitslabs.com>
Signed-off-by: NSolganik Alexander <sashas@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Data digest is a nvme-tcp specific feature, but nothing prevents other
transports reusing the concept so do not associate with tcp transport
solely.
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Header digest is a nvme-tcp specific feature, but nothing prevents other
transports reusing the concept so do not associate with tcp transport
solely.
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

nvmet-tcp will implement it to allocate queue commands which
are only known at nvmf connect time (sq size).
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Introduce a helper to copy datagram into an iovec iterator
but also update a predefined hash. This is useful for
consumers of skb_copy_datagram_iter to also support inflight
data digest without having to finish to copy and only then
traverse the iovec and calculate the digest hash.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Allow consumers that want to use iov iterator helpers and also update
a predefined hash calculation online when copying data. This is useful
when copying incoming network buffers to a local iterator and calculate
a digest on the incoming stream. nvme-tcp host driver that will be
introduced in following patches is the first consumer via
skb_copy_and_hash_datagram_iter.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

skb_copy_datagram_iter and skb_copy_and_csum_datagram are essentialy
the same but with a couple of differences: The first is the copy
operation used which either a simple copy or a csum_and_copy, and the
second are the behavior on the "short copy" path where simply copy
needs to return the number of bytes successfully copied while csum_and_copy
needs to fault immediately as the checksum is partial.

Introduce __skb_datagram_iter that additionally accepts:
1. copy operation function pointer
2. private data that goes with the copy operation
3. fault_short flag to indicate the action on short copy
Suggested-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The single caller to csum_and_copy_to_iter is skb_copy_and_csum_datagram
and we are trying to unite its logic with skb_copy_datagram_iter by passing
a callback to the copy function that we want to apply. Thus, we need
to make the checksum pointer private to the function.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This will be useful to consolidate skb_copy_and_hash_datagram_iter and
skb_copy_and_csum_datagram to a single code path.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Prevent a namespace conflict as in following patches as skbuff.h will
include the crypto API.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSagi Grimberg <sagi@lightbitslabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Between v3 [1] and v4 [2] of the blkg association series, the
association point moved from generic_make_request_checks(), which is
called after the request enters the queue, to bio_set_dev(), which is when
the bio is formed before submit_bio(). When the request_queue goes away,
the blkgs supporting the request_queue are destroyed and then the
q->root_blkg is set to %NULL.

This patch adds a %NULL check to blkg_tryget_closest() to prevent the
NPE caused by the above. It also adds a guard to see if the
request_queue is dying when creating a blkg to prevent creating a blkg
for a dead request_queue.

[1] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/
[2] https://lore.kernel.org/lkml/20181126211946.77067-1-dennis@kernel.org/

Fixes: 5cdf2e3f ("blkcg: associate blkg when associating a device")
Reported-and-tested-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NDennis Zhou <dennis@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

rwb_enabled() can't be changed when there is any inflight IO.

wbt_disable_default() may set rwb->wb_normal as zero, however the
blk_stat timer may still be pending, and the timer function will update
wrb->wb_normal again.

This patch introduces blk_stat_deactivate() and applies it in
wbt_disable_default(), then the following IO hang triggered when running
parted & switching io scheduler can be fixed:

[  369.937806] INFO: task parted:3645 blocked for more than 120 seconds.
[  369.938941]       Not tainted 4.20.0-rc6-00284-g906c801e5248 #498
[  369.939797] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  369.940768] parted          D    0  3645   3239 0x00000000
[  369.941500] Call Trace:
[  369.941874]  ? __schedule+0x6d9/0x74c
[  369.942392]  ? wbt_done+0x5e/0x5e
[  369.942864]  ? wbt_cleanup_cb+0x16/0x16
[  369.943404]  ? wbt_done+0x5e/0x5e
[  369.943874]  schedule+0x67/0x78
[  369.944298]  io_schedule+0x12/0x33
[  369.944771]  rq_qos_wait+0xb5/0x119
[  369.945193]  ? karma_partition+0x1c2/0x1c2
[  369.945691]  ? wbt_cleanup_cb+0x16/0x16
[  369.946151]  wbt_wait+0x85/0xb6
[  369.946540]  __rq_qos_throttle+0x23/0x2f
[  369.947014]  blk_mq_make_request+0xe6/0x40a
[  369.947518]  generic_make_request+0x192/0x2fe
[  369.948042]  ? submit_bio+0x103/0x11f
[  369.948486]  ? __radix_tree_lookup+0x35/0xb5
[  369.949011]  submit_bio+0x103/0x11f
[  369.949436]  ? blkg_lookup_slowpath+0x25/0x44
[  369.949962]  submit_bio_wait+0x53/0x7f
[  369.950469]  blkdev_issue_flush+0x8a/0xae
[  369.951032]  blkdev_fsync+0x2f/0x3a
[  369.951502]  do_fsync+0x2e/0x47
[  369.951887]  __x64_sys_fsync+0x10/0x13
[  369.952374]  do_syscall_64+0x89/0x149
[  369.952819]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  369.953492] RIP: 0033:0x7f95a1e729d4
[  369.953996] Code: Bad RIP value.
[  369.954456] RSP: 002b:00007ffdb570dd48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[  369.955506] RAX: ffffffffffffffda RBX: 000055c2139c6be0 RCX: 00007f95a1e729d4
[  369.956389] RDX: 0000000000000001 RSI: 0000000000001261 RDI: 0000000000000004
[  369.957325] RBP: 0000000000000002 R08: 0000000000000000 R09: 000055c2139c6ce0
[  369.958199] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c2139c0380
[  369.959143] R13: 0000000000000004 R14: 0000000000000100 R15: 0000000000000008

Cc: stable@vger.kernel.org
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We're missing a deferred clear off the shallow get, which can cause
a hang. Additionally, when we resize the sbitmap, we should also
flush deferred clears for good measure.

Ensure we have full coverage on batch clears, even for paths where
we would not be doing deferred clear. This makes it less error
prone for future additions.
Reported-by: NBart Van Assche <bvanassche@acm.org>
Tested-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Ehen using pblk with 0 sized metadata both ppa list and meta list
points to the same memory since pblk_dma_meta_size() returns 0 in
that case.

This patch fix that issue by ensuring that pblk_dma_meta_size()
always returns space equal to sizeof(struct pblk_sec_meta) and thus
ppa list and meta list points to different memory address.

Even that in that case drive does not really care about meta_list
pointer, this is the easiest way to fix that issue without introducing
changes in many places in the code just for 0 sized metadata case.

The same approach needs to be also done for pblk_get_sec_meta()
since we also cannot point to the same memory address in meta buffer
when we are using it for pblk recovery process
Reported-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Tested-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk performs recovery of open lines by storing the LBA in the per LBA
metadata field. Recovery therefore only works for drives that has this
field.

This patch adds support for packed metadata, which store l2p mapping
for open lines in last sector of every write unit and enables drives
without per IO metadata to recover open lines.

After this patch, drives with OOB size <16B will use packed metadata
and metadata size larger than16B will continue to use the device per
IO metadata.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently pblk only check the size of I/O metadata and does not take
into account if this metadata is in a separate buffer or interleaved
in a single metadata buffer.

In reality only the first scenario is supported, where second mode will
break pblk functionality during any IO operation.

This patch prevents pblk to be instantiated in case device only
supports interleaved metadata.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently lightnvm and pblk uses single DMA pool, for which the entry
size always is equal to PAGE_SIZE. The contents of each entry allocated
from the DMA pool consists of a PPA list (8bytes * 64), leaving
56bytes * 64 space for metadata. Since the metadata field can be bigger,
such as 128 bytes, the static size does not cover this use-case.

This patch adds support for I/O metadata above 56 bytes by changing DMA
pool size based on device meta size and allows pblk to use OOB metadata
>=16B.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk currently assumes that size of OOB metadata on drive is always
equal to size of pblk_sec_meta struct. This commit add helpers which will
allow to handle different sizes of OOB metadata on drive in the future.

After this patch only OOB metadata equal to 16 bytes is supported.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently DMA allocated memory is reused on partial read
for lba_list_mem and lba_list_media arrays. In preparation
for dynamic DMA pool sizes we need to move this arrays
into pblk_pr_ctx structures.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The current kref implementation around pblk global caches triggers a
false positive on refcount_inc_checked() (when called) as the kref is
initialized to 0. Instead of usint kref_inc() on a 0 reference, which is
in principle correct, use kref_init() to avoid the check. This is also
more explicit about what actually happens on cache creation.

In the process, do a small refactoring to use kref helpers.

Fixes: 1864de94 "lightnvm: pblk: stop recreating global caches"
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently the geometry of an OCSSD is enumerated using a two step
approach:

First, nvm_register is called, the OCSSD identify command is issued,
and second the geometry sos and csecs values are read either from the
OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data
structure if it is a 2.0 device.

This patch recombines it into a single step, such that nvm_register can
use the csecs and sos fields independent of which version is used. This
enables one to dynamically size the lightnvm subsystem dma pool.
Reviewed-by: NIgor Konopko <igor.j.konopko@intel.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk's recovery path is single threaded and therefore a number of
assumptions regarding concurrency can be made. To avoid confusion, make
this explicit with a couple of comments in the code.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Protect the list_add on the pblk_line_init_bb() error
path in case this code is used for some other purpose
in the future.
Signed-off-by: NHua Su <suhua.tanke@gmail.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NHua Su <suhua.tanke@gmail.com>
Updated description.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the call to pblk_line_replace_data as it returns
directly because we have not set l_mg->data_next yet.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The chunk metadata is allocated with vmalloc, so we need to use
vfree to free it.

Fixes: 090ee26f ("lightnvm: use internal allocation for chunk log page")
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

ADDR_POOL_SIZE is not used anymore, so remove the macro.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In a worst-case scenario (random writes), OP% of sectors
in each line will be invalid, and we will then need
to move data out of 100/OP% lines to free a single line.

So, to prevent the possibility of running out of lines,
temporarily block user writes when there is less than
100/OP% free lines.

Also ensure that pblk creation does not produce instances
with insufficient over provisioning.

Insufficient over-provising is not a problem on real hardware,
but often an issue when running QEMU simulations (with few lines).
100 lines is enough to create a sane instance with the standard
(11%) over provisioning.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If mapping fails (i.e. when running out of lines), handle the error
and stop writing.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Lines inflicted with write errors lines might be recovered
if they have not been recycled after write error garbage collection.

Ensure that the emeta accounting of valid lbas is correct
for such lines to avoid recovery inconsistencies.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make sure we only look up valid lba addresses on the resubmission path.

If an lba is invalidated in the write buffer, that sector will be
submitted to disk (as it is already mapped to a ppa), and that write
might fail, resulting in a crash when trying to look up the lba in the
mapping table (as the lba is marked as invalid).
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: NJavier González <javier@javigon.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The check for chunk closes suffers from an off-by-one issue, leading
to chunk close events not being traced.

Fixes: 4c44abf4 ("lightnvm: pblk: add trace events for chunk states")
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With gcc 4.1:

    drivers/lightnvm/core.c: In function ‘nvm_get_bb_meta’:
    drivers/lightnvm/core.c:977: warning: ‘ret’ may be used uninitialized in this function

and

    drivers/nvme/host/lightnvm.c: In function ‘nvme_nvm_get_chk_meta’:
    drivers/nvme/host/lightnvm.c:580: warning: ‘ret’ may be used uninitialized in this function

Indeed, if (for the former) the number of channels or LUNs is zero, or
(for both) the passed number of chunks is zero, ret will be returned
uninitialized.

Fix this by preinitializing ret to zero.

Fixes: aff3fb18 ("lightnvm: move bad block and chunk state logic to core")
Fixes: a294c199 ("lightnvm: implement get log report chunk helpers")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>