- 15 11月, 2010 1 次提交
-
-
由 Jesper Juhl 提交于
It's enough to include the asm/smp_plat.h once in arch/arm/mm/flush.c Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 28 10月, 2010 13 次提交
-
-
由 Russell King 提交于
Use memblock information to setup lowmem mappings rather than the membank array. This allows platforms to manipulate the memblock information during initialization to reserve (and remove) memory from the kernel's view of memory - and thus allowing platforms to setup their own private mappings for this memory without causing problems with multiple aliasing mappings: size = min(size, SZ_2M); base = memblock_alloc(size, min(align, SZ_2M)); memblock_free(base, size); memblock_remove(base, size); This is needed because multiple mappings of regions with differing attributes (sharability, type, cache) are not permitted with ARMv6 and above. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
bootmem_init() no longer makes several uses of the membank information, so move this into the one remaining called function which does use it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Free the high pages using the memblock memory lists - and more importantly, exclude any memblock allocations in highmem from the free'd memory. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Switch arm_bootmem_init() to use memblock instead of membank to free memory into bootmem. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
This was missing from the noMMU code, so there was the possibility of things not working as expected if out of order memory information was passed. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mika Westerberg 提交于
Commit 81d11955 ("ARM: 6405/1: Handle __flush_icache_all for CONFIG_SMP_ON_UP") added a new function to struct cpu_cache_fns: flush_icache_all(). It also implemented this for v6 and v7 but not for v5 and backwards. Without the function pointer in place, we will be calling wrong cache functions. For example with ep93xx we get following: Unable to handle kernel paging request at virtual address ee070f38 pgd = c0004000 [ee070f38] *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.36+ #1) PC is at 0xee070f38 LR is at __dma_alloc+0x11c/0x2d0 pc : [<ee070f38>] lr : [<c0032c8c>] psr: 60000013 sp : c581bde0 ip : 00000000 fp : c0472000 r10: c0472000 r9 : 000000d0 r8 : 00020000 r7 : 0001ffff r6 : 00000000 r5 : c0472400 r4 : c5980000 r3 : c03ab7e0 r2 : 00000000 r1 : c59a0000 r0 : c5980000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c000717f Table: c0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc581a270) [<c0032c8c>] (__dma_alloc+0x11c/0x2d0) [<c0032e5c>] (dma_alloc_writecombine+0x1c/0x24) [<c0204148>] (ep93xx_pcm_preallocate_dma_buffer+0x44/0x60) [<c02041c0>] (ep93xx_pcm_new+0x5c/0x88) [<c01ff188>] (snd_soc_instantiate_cards+0x8a8/0xbc0) [<c01ff59c>] (soc_probe+0xfc/0x134) [<c01adafc>] (platform_drv_probe+0x18/0x1c) [<c01acca4>] (driver_probe_device+0xb0/0x16c) [<c01ac284>] (bus_for_each_drv+0x48/0x84) [<c01ace90>] (device_attach+0x50/0x68) [<c01ac0f8>] (bus_probe_device+0x24/0x44) [<c01aad7c>] (device_add+0x2fc/0x44c) [<c01adfa8>] (platform_device_add+0x104/0x15c) [<c0015eb8>] (simone_init+0x60/0x94) [<c0021410>] (do_one_initcall+0xd0/0x1a4) __dma_alloc() calls (inlined) __dma_alloc_buffer() which ends up calling dmac_flush_range(). Now since the entries in the arm920_cache_fns are shifted by one, we jump into address 0xee070f38 which is actually next instruction after the arm920_cache_fns structure. So implement flush_icache_all() for the rest of the supported CPUs using a generic 'invalidate I cache' instruction. Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mika Westerberg 提交于
When running following code in a machine which has VIVT caches and USE_SPLIT_PTLOCKS is not defined: fd = open("/etc/passwd", O_RDONLY); addr = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd, 0); addr2 = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd, 0); v = *((int *)addr); we will hang in spinlock recursion in the page fault handler: BUG: spinlock recursion on CPU#0, mmap_test/717 lock: c5e295d8, .magic: dead4ead, .owner: mmap_test/717, .owner_cpu: 0 [<c0026604>] (unwind_backtrace+0x0/0xec) [<c014ee48>] (do_raw_spin_lock+0x40/0x140) [<c0027f68>] (update_mmu_cache+0x208/0x250) [<c0079db4>] (__do_fault+0x320/0x3ec) [<c007af7c>] (handle_mm_fault+0x2f0/0x6d8) [<c0027834>] (do_page_fault+0xdc/0x1cc) [<c00202d0>] (do_DataAbort+0x34/0x94) This comes from the fact that when USE_SPLIT_PTLOCKS is not defined, the only lock protecting the page tables is mm->page_table_lock which is already locked before update_mmu_cache() is called. Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Zijlstra 提交于
Christoph reported a nice splat which illustrated a race in the new stack based kmap_atomic implementation. The problem is that we pop our stack slot before we're completely done resetting its state -- in particular clearing the PTE (sometimes that's CONFIG_DEBUG_HIGHMEM). If an interrupt happens before we actually clear the PTE used for the last slot, that interrupt can reuse the slot in a dirty state, which triggers a BUG in kmap_atomic(). Fix this by introducing kmap_atomic_idx() which reports the current slot index without actually releasing it and use that to find the PTE and delay the _pop() until after we're completely done. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: NChristoph Hellwig <hch@infradead.org> Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Will says: | Commit e63075a3 removed the explicit MEMBLOCK_REAL_LIMIT #define | and introduced the requirement that arch code calls | memblock_set_current_limit to ensure that the __va macro can | be used on physical addresses returned from memblock_alloc. Unfortunately, ARM was missed out of this change. Fix this. Reported-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
After Santosh's fixup of the generic MT_MEMORY and MT_MEMORY_NONCACHED I add this fix to the TCM memory types. The main change is that the ITCM memory is L_PTE_WRITE and DOMAIN_KERNEL which works just fine. The changed to the DTCM is just cosmetic to fit with surrounding code. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 10月, 2010 2 次提交
-
-
由 Peter Zijlstra 提交于
Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 10月, 2010 4 次提交
-
-
由 Santosh Shilimkar 提交于
For the big buffers which are in excess of cache size, the maintaince operations by PA are very slow. For such buffers the maintainace operations can be speeded up by using the WAY based method. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
-
由 Santosh Shilimkar 提交于
The cache size is needed for to optimise range based maintainance operations Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
-
由 Thomas Gleixner 提交于
Add flush_all, inv_all and disable functions to the l2x0 code. These functions are called from kexec code to prevent random crashes in the new kernel. Platforms like OMAP which control L2 enable/disable via SMI mode can override the outer_cache.disable() function to implement their own. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
-
由 Catalin Marinas 提交于
With this L2 cache controller, the cache maintenance by PA and sync operations are atomic and do not require a "wait" loop. This patch conditionally defines the cache_wait() function. Since L2x0 cache controllers do not work with ARMv7 CPUs, the patch automatically enables CACHE_PL310 when only CPU_V7 is defined. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 13 10月, 2010 2 次提交
-
-
由 Russell King 提交于
... but produce a big warning about the problem as encouragement for people to fix their drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Yinghai Lu 提交于
We need to round memory regions correctly -- specifically, we need to round reserved region in the more expansive direction (lower limit down, upper limit up) whereas usable memory regions need to be rounded in the more restrictive direction (lower limit up, upper limit down). This introduces two set of inlines: memblock_region_memory_base_pfn() memblock_region_memory_end_pfn() memblock_region_reserved_base_pfn() memblock_region_reserved_end_pfn() Although they are antisymmetric (and therefore are technically duplicates) the use of the different inlines explicitly documents the programmer's intention. The lack of proper rounding caused a bug on ARM, which was then found to also affect other architectures. Reported-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB4CDFD.4020105@kernel.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 08 10月, 2010 3 次提交
-
-
由 Russell King 提交于
When hotplug CPU is enabled, we need to keep the list of supported CPUs, their setup functions, and __lookup_processor_type in place so that we can find and initialize secondary CPUs. Move these into the __CPUINIT section. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Use _sdata as the start of the data section, rather than _data. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Commit 14eff181 added proper detection for ARM11MPCore/Cortex-A9 instead of detecting them as ARMv7. However, it was missing the HWCAP_TLS flags. HWCAP_TLS is needed if support for earlier ARMv6 is compiled into the same kernel. Without HWCAP_TLS flags the userspace won't work unless nosmp is specified: Kernel panic - not syncing: Attempted to kill init! CPU0: stopping <c005d5e4>] (unwind_backtrace+0x0/0xec) from [<c004c2f8>] (do_IPI+0xfc/0x184) <c004c2f8>] (do_IPI+0xfc/0x184) from [<c03f25bc>] (__irq_svc+0x9c/0x160) Exception stack(0xc0565f80 to 0xc0565fc8) 5f80: 00000001 c05772a0 00000000 00003a61 c0564000 c05cf500 c003603c c0578600 5fa0: 80033ef0 410fc091 0000001f 00000000 00000000 c0565fc8 c00b91f8 c0057cb4 5fc0: 20000013 ffffffff [<c03f25bc>] (__irq_svc+0x9c/0x160) from [<c0057cb4>] (default_idle+0x30/0x38) [<c0057cb4>] (default_idle+0x30/0x38) from [<c005829c>] (cpu_idle+0x9c/0xf8) [<c005829c>] (cpu_idle+0x9c/0xf8) from [<c0008d48>] (start_kernel+0x2a4/0x300) [<c0008d48>] (start_kernel+0x2a4/0x300) from [<80008084>] (0x80008084) Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 10月, 2010 5 次提交
-
-
由 Will Deacon 提交于
copy_to_user_page can be used by access_process_vm to write to an executable page of a process using a mapping acquired by kmap. For systems with I-cache aliasing, flushing the I-cache using the Kernel mapping may leave stale data in the I-cache if the user mapping is of a different colour. This patch introduces a flush_icache_alias function to flush.c, which calls flush_icache_range with a mapping of the specified colour. flush_ptrace_access is then modified to call this new function instead of coherent_kern_range in the case of an aliasing I-cache and a non-aliasing D-cache. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Do this by adding flush_icache_all to cache_fns for ARMv6 and 7. As flush_icache_all may neeed to be called from flush_kern_cache_all, add it as the first entry in the cache_fns. Note that now we can remove the ARM_ERRATA_411920 dependency to !SMP so it can be selected on UP ARMv6 processors, such as omap2. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
The commit f1a2481c sets up the default flags for MT_MEMORY and MT_MEMORY_NONCACHED memory types. L_PTE_USER flag is wrongly set as default for these entries so remove it. Also adding the 'L_PTE_WRITE' flag so that these pages become read-write instead of just being read-only [this stops them being exposed to userspace, which is the main concern here --rmk] Reported-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur under very rare conditions due to a store buffer optimisation. This workaround sets a bit in the diagnostic register of the Cortex-A9, disabling the optimisation and preventing the problem from occurring. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 10月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
There are very few legitimate use cases, if any, for directly accessing system RAM through /dev/mem. So let's mimic what they do on x86 and forbid it when CONFIG_STRICT_DEVMEM is turned on. Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
- 25 9月, 2010 1 次提交
-
-
由 Santosh Shilimkar 提交于
This patch populates the L1 entries for MT_MEMORY and MT_MEMORY_NONCACHED types so that at boot-up, we can map memories outside system memory at page level granularity Previously the mapping was limiting to section level, which creates unnecessary additional mapping for which physical memory may not present. On the newer ARM with speculation, this is dangerous and can result in untraceable aborts. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 9月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
When the policy for user space is to ignore misaligned accesses from user space, the processor then performs a documented rotation on the accessed data. This is the result of the access being trapped, and the kernel disabling the alignment trap before returning to user space again. In kernel space we always want misaligned accesses to be fixed up. This is enforced by always re-enabling the alignment trap on every entry into kernel space from user space. No such re-enabling is performed when an exception occurs while already in kernel space as the alignment trap is always supposed to be enabled in that case. There is however a small race window when a misaligned access in user space is trapped and the alignment trap disabled, but the CPU didn't return to user space just yet. Any exception would be entered from kernel space at that point and the kernel would then execute with the alignment trap disabled. Thanks to Maxime Bizon <mbizon@freebox.fr> for providing a test module that made this issue reproducible. Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 9月, 2010 5 次提交
-
-
由 Catalin Marinas 提交于
ARMv7 onwards requires that there are no aliases to the same physical location using different memory types (i.e. Normal vs Strongly Ordered). Access to SO mappings when the unaligned accesses are handled in hardware is also Unpredictable (pgprot_noncached() mappings in user space). The /dev/mem driver requires uncached mappings with O_SYNC. The patch implements the phys_mem_access_prot() function which generates Strongly Ordered memory attributes if !pfn_valid() (independent of O_SYNC) and Normal Noncacheable (writecombine) if O_SYNC. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
ARMv7 processors like Cortex-A9 broadcast the cache maintenance operations in hardware. This patch allows the flush_dcache_page/update_mmu_cache pair to work in lazy flushing mode similar to the UP case. Note that cache flushing on SMP systems now takes place via the set_pte_at() call (__sync_icache_dcache) and there is no race with other CPUs executing code from the new PTE before the cache flushing took place. Tested-by: NRabin Vincent <rabin.vincent@stericsson.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
On SMP systems, there is a small chance of a PTE becoming visible to a different CPU before the current cache maintenance operations in update_mmu_cache(). To avoid this, cache maintenance must be handled in set_pte_at() (similar to IA-64 and PowerPC). This patch provides a unified VIPT cache handling mechanism and implements the __sync_icache_dcache() function for ARMv6 onwards architectures. It is called from set_pte_at() and replaces the update_mmu_cache(). The latter is still used on VIVT hardware where a vm_area_struct is required. Tested-by: NRabin Vincent <rabin.vincent@stericsson.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
There are places in Linux where writes to newly allocated page cache pages happen without a subsequent call to flush_dcache_page() (several PIO drivers including USB HCD). This patch changes the meaning of PG_arch_1 to be PG_dcache_clean and always flush the D-cache for a newly mapped page in update_mmu_cache(). The patch also sets the PG_arch_1 bit in the DMA cache maintenance function to avoid additional cache flushing in update_mmu_cache(). Tested-by: NRabin Vincent <rabin.vincent@stericsson.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Commit d73cd428 forced non-lazy cache flushing of highmem pages in flush_dcache_page(). This isn't needed since __flush_dcache_page() (called lazily from update_mmu_cache) can handle highmem pages (fixed by commit 7e5a69e8). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 9月, 2010 2 次提交
-
-
由 Daniel Walker 提交于
Setting of these bits can cause issues on other SMP SoC's not produced by ARM. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NDaniel Walker <dwalker@codeaurora.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur if a shared cache line is replaced on one CPU as another CPU is accessing it. This workaround sets two bits in the diagnostic register of the Cortex-A9, reducing the linefill issuing capabilities of the processor and avoiding the erroneous behaviour. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-